SUMMARY
LAN SERVER CONNECTION FROM OS/2 2.0's VDM
In a system running LAN Manager 2.2 on the server and LAN Manager 2.2's
client for IBM OS/2 2.0, you can initiate connections to the server while
running an OS/2 session (for example, with a NET USE command), but not
while running in OS/2 2.0's Virtual DOS machine (VDM) or Windows Subsystem.
Although a VDM has full access to LAN resources such as network drives, the
VDM has no LAN redirector loaded, so it cannot initiate a LAN connection.
USE OS/2 LAN REQUESTER
To achieve LAN connectivity from both OS/2 and VDM sessions, use IBM's
OS/2 LAN requester. This provides a NetBIOS session in each VDM, upon
which the IBM DOS LAN requester may be loaded, allowing NET USE commands
to be initiated from the VDM.
PROCEDURE
To do this in a LAN server environment, load the virtual NetBIOS driver
(using OS/2 CONFIG.SYS) to provide NetBIOS support in each VDM. Run
SETUPVDD.EXE, which adds the Virtual NetBIOS device driver (LANVDD.OS2)
to CONFIG.SYS.
Then install the DOS LAN requester (DLR) on each VDM. (Note that there is
no requirement for LAN support program.) When the requester is installed,
add the entry NET START RDR (with the appropriate command line switches)
to the AUTOEXEC.BAT that is executed by the VDM.
The virtual NetBIOS driver "talks" to the OS/2 protect mode NetBIOS
interface, which in the case of IBM's LAN Server is configured by means of
LAPS (LAN Adapter and Protocol Support).
VDM DLR OS/2 LAN requester
| |
virtual NetBIOS |
| |
OS/2 protect mode NetBIOS
|
OS/2 LAN Adapter and Protocol Support