"Error reading from file" error message when you try to install programs on a computer that is running Windows 2000 or Windows XP (824894)


The information in this article applies to:

  • Microsoft Access 2000
  • Microsoft Encarta Africana, Third Edition
  • Microsoft Encarta Encyclopedia Standard 2001 for Windows
  • Microsoft Encarta Encyclopedia Deluxe 2001 for Windows
  • Microsoft Encarta Interactive World Atlas 2001
  • Microsoft Encarta Reference Suite 2001
  • Microsoft Encarta World English Dictionary 2001
  • Microsoft Greetings 2000
  • Microsoft Greetings 2001
  • Microsoft Home Publishing 2000
  • Microsoft Home Publishing Express 2000
  • Microsoft MapPoint 2001
  • Microsoft Office 2000 (Setup)
  • Microsoft Picture It! 2000
  • Microsoft Picture It! Express 2001
  • Microsoft Picture It! Express 2002 1.0
  • Microsoft Picture It! Photo 2001
  • Microsoft Picture It! Photo 2002
  • Microsoft Picture It! Photo Premium 2001
  • Microsoft Picture It! Photo Premium 2002, version 1.0
  • Microsoft Picture It! Publishing 2001
  • Microsoft Picture It! Publishing 2001 Gold
  • Microsoft Picture It! Publishing 2002, Gold, version 1.0
  • Microsoft Picture It! Publishing 2001 Platinum
  • Microsoft Picture It! Publishing Platinum 2002 1.0
  • Microsoft Picture It! Publishing 2001 Silver
  • Microsoft Picture It! Express 2000
  • Microsoft Streets and Trips 2001
  • Microsoft Word 2000
  • Microsoft Works 2000
  • Microsoft Works 7.0
  • Microsoft Works 6
  • Microsoft Works Suite 2003
  • Microsoft Works Suite 2001
  • Microsoft Works Suite 2000
  • Microsoft Office XP Professional
  • Microsoft Office XP Small Business
  • Microsoft Office XP Standard
  • Microsoft Office XP Students and Teachers
  • Microsoft Office XP Developer
  • Microsoft Access 2002
  • Microsoft Excel 2002
  • Microsoft FrontPage 2002
  • Microsoft Outlook 2002
  • Microsoft PowerPoint 2002
  • Microsoft Word 2002
For a Microsoft Windows 95, Microsoft Windows 98, or Microsoft Windows Millennium Edition (Me) version of this article, see 248263.

SYMPTOMS

When you try to install one of the programs listed in the "Applies to" section on a computer that is running Microsoft Windows 2000 or Microsoft Windows XP, you may receive an error message that is similar to one of the following:
Error 1305. Error reading from file: filename
Error reading from file: filename

CAUSE

This issue may occur if one or more of the following conditions are true:
  • Your CD-ROM or DVD drive is not configured correctly.
  • The program CD-ROM or DVD is damaged or dirty.
  • The Microsoft Data Access Components (MDAC) installation is damaged or you do not have the most recent version installed.

RESOLUTION

To resolve this issue, use one or more of the following methods in the order that they appear. At the end of each method, try to install the program. If the method does not resolve the issue, continue to the next method.

Method 1: Examine the CD-ROM or DVD

Examine the CD-ROM or DVD for visible damage. If you experience issues with a DVD disc, make sure that you insert the DVD in a DVD drive instead of a CD-ROM or a DVD drive. If this does not resolve the issue, continue to the next method

Method 2: Clean the Program CD-ROM or DVD

Clean the program CD-ROM or DVD. To do so, use a commercial CD-ROM or DVD cleaning kit, or gently wipe the silver side of the CD-ROM or DVD with a soft, lint-free cotton cloth from the center of the CD-ROM or DVD outward. Do not use paper cloth. Paper cloth can scratch the plastic and leave streaks, and do not use a circular motion when you wipe the CD-ROM or DVD. Dry the CD-ROM or DVD thoroughly before you insert it in the CD-ROM or DVD drive.

Method 3: Test the CD-ROM or DVD in Another Drive

Try the CD-ROM or DVD in another drive. If the CD-ROM or DVD works in a different drive, then the issue may be that the original drive is not reading the CD-ROM or DVD correctly. Contact your computer manufacturer, CD-ROM, or DVD drive manufacturer.

Method 4: Clean the CD-ROM or DVD Drive

Clean the CD-ROM or DVD drive by using a CD-ROM or a DVD drive cleaning disc if you have one. Drive cleaning discs are available in most computer or home electronics stores.

Method 5: Quit Unnecessary Software

Other programs, such as antivirus, firewall, or anti-crash software, may interfere with the reading of the CD-ROM or DVD. To quit all visible programs, right-click each icon in the notification area, and then click Exit, Quit, Close, or Disable (if these options are available).

Method 6: Look for Known Issues with the Drive or Recording Software

Search the Microsoft Knowledge Base for your brand and model of CD-ROM or DVD drive. Known issues with specific drives may be found in the Knowledge Base. If your computer includes CD-R or CD/RW recording (burning) software or packet-writing software, search the Microsoft Knowledge Base for known issues with the software. To view the Microsoft Knowledge Base, visit the following Microsoft Web site:

http://support.microsoft.com

Method 7: Look for Drive Firmware Updates

Contact the manufacturer of your computer or CD-ROM or DVD drive to see if software updates for your drive are available. These are referred to as "firmware" updates. Occasionally updates are issued that can resolve issues where the drive can read most, but not all, discs.

Method 8: Disable Direct Memory Access (DMA) for the CD-ROM or DVD Drive

Note To disable Direct Memory Access (DMA) for the CD-ROM or DVD drive, follow these steps.

Windows XP Only

Note If your drive is not listed, you probably have a small computer system interface (SCSI) drive. DMA options are not available for SCSI drives.
  1. Click Start, and then click Control Panel.
  2. Click Performance and Maintenance, and then click System.
  3. Click the Hardware tab, and then click Device Manager.
  4. Expand the IDE ATA/ATAPI controllers folder, double-click Primary IDE Channel, and then click the Advanced Settings tab.
  5. In the Transfer Mode box, click PIO only, and then click OK.
  6. Double-click Primary IDE Channel, and then click the Advanced Settings tab.
  7. In the Transfer Mode box, click DMA if available, and then click OK.
  8. Restart the computer.
For additional information about how to install programs from CDs on Microsoft Office 2000, click the following article number to view the article in the Microsoft Knowledge Base:

266700 OFFXP: Troubleshooting installation from compact disc media

Method 9: Remove Duplicate Drives

Step 1: Locate Duplicate Drives

  1. Click Start, and then click Control Panel.

    Note In Windows 2000, click Start, point to Settings, and then click Control Panel.
  2. Double-click System.
  3. Click the Hardware tab, and then click Device Manager.
  4. Expand the CD-ROM or DVD branch.
  5. Right-click the device, and then click Properties.
  6. Note the information and the settings of each device.

Step 2: Restart Windows in Safe Mode

To restart Windows in Safe Mode, follow these steps
  1. It is best to print these instructions before you continue.

    They will not be available after you shut your computer down in step 3.
  2. Click Start, click Shut Down.

    In the drop-down list, click Shut down.
  3. In the Shut Down Windows dialog box, click Restart, and then click OK.
  4. When you are prompted, press F8.
  5. Use the arrow keys to select the appropriate safe mode option, and then press ENTER.
  6. If you have a dual-boot or multiple-boot system, select the installation that you want to access by using the arrow keys, and then press ENTER.

Step 3: Remove Duplicate Devices

If you see new copies of a device that is in the list of devices that you noted in step 1 in method 9, verify the properties of each copy of the device. If the properties for the device match the properties that you recorded, keep the device. If the properties for the device do not match the properties that you recorded, remove the device.
  1. Click Start, and then click Control Panel.

    Note In Windows 2000, click Start, point to Settings, and then click Control Panel.
  2. Double-click System.
  3. Click the Hardware tab, and then click Device Manager.
  4. Expand the CD-ROM or DVD branch.
  5. Right-click each duplicate device, and then click Uninstall or Remove.
  6. Follow the instructions on the screen to completely remove the duplicate device.
  7. Repeat steps 4 through 6 until each duplicate device has been removed.
  8. Quit the Device Manager, and then close each Control Panel dialog box.

Method 10: Clean Boot Your Computer

Use a clean boot to restart your computer and see if the issue persists. A clean boot is a way to create a clean environment. When you start your computer by using a clean boot, Microsoft Windows starts and loads only basic devices and services. For more information about how to use a clean boot, see the "More Information" section later in this article.
To restart your computer by using a clean boot, follow these steps.

Windows XP Only

Note You cannot restart a Windows 2000-based computer by using a clean boot procedure.
  1. Click Start, and then click Run.
  2. Type msconfig in the Open box, and then click OK.
  3. Click the General tab, and then click Selective Startup.
  4. Click to clear the following check boxes under Selective Startup:
    • Process SYSTEM.INI file
    • Process WIN.INI file
    • Load Startup Items
  5. Click the Services tab, click to select the Hide All Microsoft Services check box, and then click Disable All.
  6. Click OK, and then click Restart to restart the computer.

    If a clean boot procedure does not resolve this issue, restore the computer to use a normal startup. To do so, click Normal Startup - load all device drivers and services on the General tab in the System Configuration Utility, click OK, and then click Restart to restart the computer.

Method 11: Install the Most Recent Version of MDAC

Note If you are getting these symptoms with Encarta products, go to Method 12.

Windows XP

  1. Click Start, and then click Search.
  2. In the left pane, click All files and folders.
  3. In the All or part of the file name box, type Mdac_typ.exe.
  4. In the Look in box, click your CD-ROM or DVD drive, and then click Search.
  5. When the file is found, double-click Mdac_typ.exe to start the installation process.

Windows 2000

  1. Click Start, point to Search, and then click For Files or Folders.
  2. In the Search for files or folders named box, type Mdac_typ.exe.
  3. In the Look in box, click your CD-ROM or DVD drive, and then click Search Now.
  4. When the file is found, double-click Mdac_typ.exe to start the installation process.
Note For information about how to install the latest version of MDAC from the Internet, visit the following Microsoft Web site:

http://msdn.microsoft.com/downloads

If this does not resolve the issue, continue to the next method.

Method 12: Look for Alternative Installation Locations

If your computer is connected to a network, you may be able to share the Microsoft product's CD-ROM or DVD drive to another computer's CD-ROM or DVD drive. If you can share another computer's CD-ROM or DVD drive, insert the product's CD-ROM or DVD in that drive, and then from your workstation, connect to the other computer and run Setup. To do so, follow these steps where server is the name of the computer where the CD-ROM or DVD is located, and cdrom is the share name of the CD-ROM or DVD drive:
  1. Click Start, click Run, and then type \\server\cdrom\setup.exe in the Open box.
  2. Click OK.

MORE INFORMATION

For additional information about how to troubleshoot CD-ROM or DVD-ROM read issues, click the following article number to view the article in the Microsoft Knowledge Base:

218617 How to troubleshoot CD-ROM or DVD-ROM read issues


For additional information about how to perform a clean boot in Windows XP, click the following article number to view the article in the Microsoft Knowledge Base:

310353 How to perform a clean boot in Windows XP


For additional information about how to troubleshoot CD-ROM issues in Windows 2000 and Microsoft Windows NT, click the following article number to view the article in the Microsoft Knowledge Base:

126380 Troubleshooting CD-ROM problems in Windows 2000 and Windows NT


For additional information about how to troubleshoot CD-ROM issues in Windows XP, click the following article number to view the article in the Microsoft Knowledge Base:

314096 How to troubleshoot CD-ROM drive problems in Windows XP


For information about how to contact the manufacturer of your CD-ROM, click the appropriate article number in the following list to view the article in the Microsoft Knowledge Base:

65416 Hardware and Software Third-Party Vendor Contact List, A-K

60781 Hardware and Software Third-Party Vendor Contact List, L-P

60782 Hardware and Software Third-Party Vendor Contact List, Q-Z

Modification Type:MinorLast Reviewed:4/11/2006
Keywords:kberrmsg kbprb KB824894 kbAudEndUser
©2004 Microsoft Corporation. All rights reserved.