How to install and configure SharePoint Team Services for Microsoft Project Server 2002 on Microsoft Windows Server 2003 (820774)

MORE INFORMATION

1. Install Microsoft Internet Information Services (IIS) 6.0 and the Indexing Service
   
   You must install IIS 6.0 and the Indexing Service on the computer before you install SharePoint Team Services. By default, IIS 6.0 is not installed with Windows Server 2003. To install IIS 6.0 and the Indexing Service, follow these steps:
   1. Click Start, click Control Panel, and then click Add or Remove Programs.
   2. Click Add/Remove Windows Components.
   3. Click Application Server, and then click Details.
   4. Click to select the Internet Information Services (IIS) check box, and then click OK.
   5. Click to select the Indexing Service check box, and then click Next.
   6. Click Finish.
   back to the top
2. Configure the settings for IIS 6.0
   
   

   1. Configure IIS 6.0 to Use IIS 5.0 Isolation Mode

      SharePoint Team Services was developed to take advantage of functionality inherent in IIS version 5.0. When you activate Isolation Mode in IIS 6.0, SharePoint Team Services can use the IIS 5.0 sessions and components in IIS 6.0. To configure IIS 6.0 to use IIS 5.0 isolation mode, follow these steps:
      1. Click Start, point to Administrative Tools, and then click Internet Information Services Manager.
      2. Expand ServerName, where ServerName is the name of the server.
      3. Right-click Web Sites, and then click Properties.
      4. Click the Service tab.
      5. Under Isolation mode, click to select the Run WWW Service in IIS 5.0 isolation mode check box, and then click OK.
      6. Close Internet Information Services Manager.

   2. Activate the Indexing Service Web Extension

      You must activate the Indexing Service Web extension in IIS 6.0 before you can use the Indexing Service. After you activate the Web Extension, you can configure indexing for Web content so that users can perform searches on that content. To enable the Indexing Service Web extension, follow these steps:
      1. Click Start, click Administrative Tools, and then click Internet Information Services Manager.
      2. Expand ServerName, where ServerName is the name of the server, and then click Web Service Extensions.
      3. In the right pane of the IIS Manager, right-click Indexing Service, and then click Allow.
      4. Quit the Internet Information Services Manager.

   3. Add the Uniform Resource Locator (URL) of the Server to the Local Intranet Zone in Internet Explorer

      By default, the Microsoft Internet Explorer Enhanced Security Configuration feature is enabled in Internet Explorer in Windows Server 2003. The Internet zone is set to use "High" security and the Trusted zone is set to use "Medium" security.
      
      After SharePoint Team Services is installed on the computer, you must add the URL of the server to the Local Intranet Zone to access the SharePoint Team Services administration pages and the SharePoint Team Services home page. To add the server's URL to the Local Intranet Zone, follow these steps:
      1. Start Internet Explorer.
      2. Click the Tools menu, and then click Internet Options.
      3. Click the Security tab.
      4. Click Local intranet, click Sites, and then click Advanced.
      5. In the Add this Web site to the zone box, type the URL of the server (for example, type http://ServerName, where ServerName is the name of your server), and then click OK.
      6. Click OK, and then click OK.
   back to the top
3. Install SharePoint Team Services
   
   Install SharePoint Team Services on your computer. To install SharePoint Team Services, follow these steps:
   1. Insert your Microsoft Project Server CD-ROM into the CD-ROM drive of the server computer.
   2. Right-click My Computer on the desktop, and then click Explore.
   3. Click the CD-ROM drive that contains the Microsoft Project Server CD-ROM.
   4. Locate the CD-ROM Drive:\Prjsvr\Sharept folder on the CD-ROM.
   5. Click Start, click Run, and then press and drag SetupSe.exe to the Open line in the Run dialog box. The run line will point to SetupSe.exe on your CD-ROM drive, for example, D:\Prjsvr\Sharept\SetupSe.exe.
   6. Add the /nd parameter to the end of the Run command line. For example, the Run line may look similar to the following:
      
      CD-ROM Drive:\Prjsvr\Sharept\SetupSe.exe /nd
      
      Note The /nd parameter will prevent the installation of the Microsoft Data Engine (MSDE) if there is no database detected. This is intended and makes it possible for you to connect to a specific database server.
   7. Click OK to continue with the installation.
   8. Click Yes when you receive following message:Microsoft SharePoint Setup
      
      You will have to provide the name of an existing database server running Microsoft SQL Server 7.0 or greater. Do you want to continue?
   9. Type your user information and the product key.
      
      Note The product key is located on the back of the Microsoft Project Server CD-ROM case.
   10. Follow the instructions on the screen to complete the SharePoint Team Services installation.
   11. After the installation is complete, continue to the next section to extend your SharePoint Team Services site.
   back to the top
4. Extend your SharePoint Team Services site
   
   After you complete the installation of SharePoint Team Services, the Microsoft SharePoint Administration page will open in the Internet Explorer browser. You must now extend your Web site. To extend your site, follow these steps:
   1. In the Virtual Servers section of the Microsoft SharePoint Administration page, find your Web site, and then click the Extend link. The Extend Virtual Server with Microsoft SharePoint Web page will open.
   2. Type the Administrator account and Database information. For Site Type, click to activate SharePoint-based Web Site, and then click Submit.
   3. After the site has been processed, you will return to the Server Administration page.
   4. In the Virtual Servers section, note the URL address.
   5. Open a new instance of Internet Explorer, and the use the URL in step d to locate your default SharePoint Team Services site.
   6. Quit Internet Explorer.
   back to the top
5. Run the SharePoint Configuration Wizard
   
   The SharePoint Configuration Wizard (Stswiz.exe) must be run to install the add-on components, such as template files and the Public Document subweb, for use with documents and issues in Microsoft Project Web Access. To run the SharePoint Configuration Wizard, follow these steps:
   1. Click Start, click Run, and then click Browse.
   2. Double-click your CD-ROM drive.
   3. Locate the file Setup.exe, click Open, and then click OK to run setup.
   4. On the Microsoft Project Server 2002 splash screen, click SharePoint Configuration Wizard.
   5. Click Continue when you receive the following message:

      Microsoft Project Server 2002
      
      The SharePoint Team Services 1.0 Configuration Wizard does not automatically install SharePoint Team Services 1.0 on this version of Windows. You have to manually set up SharePoint Team Services 1.0 on this server, and then rerun the wizard to configure the installation to work with Microsoft Project Server 2002.

   6. You will receive a message that recommends that you install the latest Microsoft Office XP Service Pack.
      1. If you click OK, the installation will stop to allow you to install the latest Office XP service pack. To obtain the latest service pack for Office XP, visit the following the Microsoft Office Update Web site:

         http://office.microsoft.com/productupdates

      2. If you click Cancel, the installation will continue. You must then install the latest Office XP Service Pack after the installation is complete.
         
         Note Office XP Service Pack 3 (SP3) is not currently compatible with SharePoint Team Services when you install Office XP SP3 on a computer that is running Microsoft Windows Server 2003. If you want to run SharePoint Team Services on a computer that is running Windows Server 2003, do not install Office XP SP3 at this time
   7. Click to select Provision additional SharePoint Web site for Project Server, and then click Next.
   8. Click to select your Web site (for example, click Default Web Site), and then click Next to start the installation.
   After the installation is complete, you will receive a confirmation screen with the following information:
   • Your server name
   • The Web server port
   • The SharePoint administration port
   • The database server name
   • The database name
   Make note of this information. You will require this information to complete step 7 in this article.
   
   back to the top
6. Configure SharePoint Team Services for Microsoft Project Web Access
   
   After you have successfully installed SharePoint Team Services you will receive a confirmation message. To connect to SharePoint Team Services when you install Microsoft Project Server, or Microsoft Project Web Access, follow these steps:
   1. Grant appropriate user permissions to the Windows user accounts on the Microsoft Project Server computer and grant appropriate user permissions to the SQL database. This step is required whether you connect to SharePoint Team Services during the Microsoft Project Server installation or after the Microsoft Project Server installation.
      
      Note Step a and step b are required only if you chose to postpone the connection to SharePoint Team Services during the installation of Microsoft Project Server 2002.
   2. Click Start, click Run, type PSComplus.exe, and then click OK.
   3. Run the WinHTTP proxy configuration utility (ProxyCfg.exe).
   For more information about how to configure SharePoint Team Services for Microsoft Project Web Access, click the following article number to view the article in the Microsoft Knowledge Base:

   819642 How to configure SharePoint Team Services for Microsoft Project Web Access

   back to the top
7. Connect to SharePoint Team Services in Microsoft Project Web Access
   
   After you complete all the steps earlier in this article, type the name of your SharePoint Server, port, and database information during the installation of Microsoft Project Server or Microsoft Project Web Access. Note This information is provided in the Run the SharePoint Configuration Wizard section earlier in this article.
   
   If you chose not to connect to SharePoint Team Services during Microsoft Project Server installation, follow these steps.
   1. Click Start, click All Programs, and then click Internet Explorer. Type your Microsoft Project Server URL in the address bar.
   2. Log on to Microsoft Project Server by using an Administrator account.
   3. Click Admin, and then click Manage SharePoint Team Services.
   4. On the Connect to Servers page, click Add Server.
   5. Type the server information for your server.
      
      Note The information required for your server is provided to you in the confirmation message that you received after running the SharePoint Configuration Wizard. Depending on your server configuration, the SharePoint Team Services Server Name may be your server name, IP Address, or Fully Qualified Domain Name (FQDN).
   6. Click Save Changes.
   Note If the connection is not established or the connection is broken, usability features (for example, automatically or manually created subwebs, and Documents and Issues) will be affected in Microsoft Project Web Access. You can verify if the connection is not established or if the connection is broken when you click Save Changes. For more information about documented issues that can occur during the connection phase, click the following article numbers to view the articles in the Microsoft Knowledge Base:

   818846 You receive a "Microsoft Project Server cannot connect to the specified Web server running SharePoint Team Services" error message when you try to connect Microsoft SharePoint Team Services

   819643 You receive a "Cannot connect to the specified Web server running SharePoint Team Services" error message when you try to connect to Microsoft SharePoint Team Services

   819638 You receive the "Cannot read from the specified SharePoint database" error message when you connect the SharePoint Team Services server to Microsoft Project Server

   For more information about how to set up and configure Microsoft Project Server, see the "Microsoft Project Server Installation Guide" on the Microsoft Project Server splash screen. To open the Microsoft Project Server Installation Guide, follow these steps:
   1. Click Start, click All Programs, and then click Microsoft Project Server.
   2. Click Microsoft Project Server Installation Guide.