Default Device Drivers in SETVER Table (78719)

SUMMARY

The SETVER.EXE device driver included with Microsoft MS-DOS 5 Upgrade contains a table of default entries. This article contains a list of the default entries for SETVER.EXE.

If SETVER.EXE is used to reference a device driver, SETVER must be entered before the specified device driver in the CONFIG.SYS file.

MORE INFORMATION

If a device driver is loaded in the CONFIG.SYS file and is referenced in the SETVER table, that device driver must be loaded after SETVER.EXE in CONFIG.SYS.

The following is an example of loading the device driver SSTDRIVE.SYS in CONFIG.SYS after SETVER.EXE:

device=c:\dos\setver.exe
device=c:\sstdrive.sys

The default SETVER table as supplied in MS-DOS 5.0 contains the following entries:

WIN200.BIN 3.40
WIN100.BIN 3.40
WINWORD.EXE 4.10
EXCEL.EXE 4.10
HITACHI.SYS 4.00
MSCDEX.EXE 4.00
REDIR4.EXE 4.00
NET.EXE 4.00
NET.COM 3.30
NETWKSTA.EXE 4.00
DXMA0MOD.SYS 3.30
BAN.EXE 4.00
BAN.COM 4.00
MSREDIR.EXE 4.00
METRO.EXE 3.31
IBMCACHE.SYS 3.40
REDIR40.EXE 4.00
DD.EXE 4.01
DD.BIN 4.01
LL3.EXE 4.01
REDIR.EXE 4.00
SYQ55.SYS 4.00
SSTDRIVE.SYS 4.00
ZDRV.SYS 4.01
ZFMT.SYS 4.01
TOPSRDR.EXE 4.00

The products included here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.