MORE INFORMATION
Page 15: Text Correction
Page 15, second to last paragraph:
Change:
"For those mathematically inclined, you will quickly realize that 256 is the largest number that can be represented by a byte."
To:
"For those mathematically inclined, you will quickly realize that 255 is the largest number that can be represented by a byte."
Page 17: Error In ASCII Character Set Table
The table on page 17 lists the incorrect ASCII code for the letter D.
Change:
D 01000010 68
To:
D 01000100 68
Page 46: Typo In Figure 4.11
Change:
"1386SX"
To:
"80386SX"
Page 52: Delete Last Paragraph
Delete the information in the last paragraph on page 52, above the bulleted items, regarding the 50 MHz 486DX processor and DX2 processors running internally and externally at 50MHz. This information can not be verified or supported.
Also delete references to 486DX processors at 50MHz in the table on page 51.
Page 55: Missing Word
Page 55, subheading Intel's Competitors, last sentence:
Change:
"Just like the Intel processors, these processors are all backward."
To:
"Just like the Intel processors, these processors are all backward-compatible."
Page 56: Typographical Error
Page 56, second paragraph, first sentence:
Change:
"On method that the Pentium Pro used to increase efficiency..."
To:
"One method that the Pentium Pro used to increase efficiency..."
Page 107: Errors In Note
Page 107, note:
Change:
"Eight 64 KB x 1 RAM chips make 64 KB bytes of memory. Or eight 256 KB x 1 RAM chips make 256 KM bytes of memory."
To:
"Eight 64 KB x 1 RAM chips make 64 KB of memory. Or eight 256 KB x 1 RAM chips make 256 KB of memory."
Page 114: Typographical Error
Page 114, under the Troubleshooting RAM subheading, first sentence:
Change:
"The MTBF (Mean Time Between Failure) rate for DRAM in a computer built after 1992 computer is something like 30 to 35 years!"
To:
"The MTBF (Mean Time Between Failure) rate for DRAM in a computer built after 1992 is something like 30 to 35 years!"
Page 140: Last Paragraph Should Refer To Platter Rather Than Head
Change:
"Data is stored in circular paths on the surface of each head. Each path is called a track. There are hundreds of tracks on the surface of each head. A set of tracks (all of the same diameter) through head head is called a cylinder."
To:
"Data is stored in circular paths on the surface of each platter. Each path is called a track. There are hundreds of tracks on the surface of each platter. A set of tracks (all of the same diameter) through each platter is called a cylinder."
Page 180: Typo In Second Bullet
Page 180, second bullet, first sentence:
Change:
"Master driverequires that the driver is loaded before anything else..."
To:
"Master drive requires that the driver is loaded before anything else..."
Page 188: Change Ultra (32-bit) SCSI SI-2 to UltraSCSI
On page 188, in the first section SCSI-2, the third bulleted item, Ultra (32-bit) SCSI SI-2 should be changed to UltraSCSI.
UltraSCSI does not increase the datapath to 32 bit. UltraSCSI deals with the transfer rate. It doubles the FAST SCSI transfer rate. UltraSCSI runs at 20 MegaTransfers/sec. Thus, Ultra narrow SCSI (8-bit) = 20MB/sec and Ultra Wide (16-bit) SCSI = 40 MB/sec.
Page 223: Graphic Doesn't Match Preceding Text
The Pixel area in the graphic should show dots of all one color. As it is, it shows R, G, and B dots.
Page 358: Delete Last Sentence In First Paragraph
On page 358, the last sentence in the first paragraph can be disputed.
When loading an application from the "run=" statement in the Win.ini file, Windows uses the function SW_SHOWNORMAL. This function leaves the application maximized in a full-screen window.
Page 253: Transmission Control Protocol/Internet Protocol (TCP/IP)
Change the definition for the term TCP/IP from:
"Transfer Control Protocol/Internet Protocol..."
To:
"Transmission Control Protocol/Internet Protocol..."
Page 358: Delete Last Sentence In First Paragraph
Page 358, first paragraph, last sentence:
Delete:
"When loading an application from the "run=" statement in the WIN.INI file, Windows uses the function SW_SHOWNORMAL. This function leaves the application maximized (that is, in a full-screen window)."
Page 458: Typographical Error
Page 458, under the Types Of Networks subheading, second paragraph, first sentence:
Change:
"In a peer-to-peer network, each computer acts as a either server..."
To:
"In a peer-to-peer network, each computer acts as either a server..."
Page 465: UTP Cannot Support Distances Greater Than 100 Meters
Page 465, last paragraph before the Coaxial Cable subheading, second sentence:
Change:
"...it does not support distances greater than 100 feet..."
To:
"...it does not support distances greater than 100 meters..."
Page 465: The Twisted Pair Cable Described Is Unshielded
Page 465, last paragraph before Coaxial Cable subheading, first sentence:
Change:
"Twisted-pair cable has several advantages over other types of cable..."
To:
"Unshielded twisted-pair cable has several advantages over other types of cable..."
Page 480: Lesson Summary Corrections
Page 480, fifth bullet:
Change:
"Network cabling is designated by speed/baud/length or type."
To:
"Network cabling is designated by speed/band/length or type."
Page 539: Chapter 5 Review Question #1 Change Surge To Sag
Page 539, Chapter 5 Review Questions, first answer, last sentence:
Change:
"A surge is a brief decrease of voltage at the source."
To:
"A sag is a brief decrease of voltage at the source."
Microsoft Press is committed to providing informative and accurate
books. All comments and corrections listed above are ready for
inclusion in future printings of this book. If you have a later printing
of this book, it may already contain most or all of the above corrections.