Monitors Need to Be Reconfigured After Reinstalling Windows 98 (188243)
The information in this article applies to:
- Microsoft Windows 98
- Microsoft Windows 98 Second Edition
This article was previously published under Q188243 If this article does not describe your hardware-related issue, please see the following Microsoft Web site to view more articles about hardware: SYMPTOMS
If you reinstall Windows 98 on a computer that contains multiple monitors,
you may have to reconfigure some monitors after Setup is completed.
CAUSE
The behavior can occur if you are using ATI video adapters. Windows 98
disables Plug and Play functionality for ATI video adapters because they
do not handle Plug and Play correctly.
RESOLUTION
To work around this behavior, manually set each monitor connected to an
ATI video adapter. To do so, follow these steps:
- Click Start, point to Settings, then click Control Panel.
- Double-click Display.
- Click the Settings tab.
- In the Display box, click the adapter you want, and then click
Advanced.
- On the Monitor tab, click Change.
- Click Next, click "Display a list of all the drivers in a specific
location, so you can select the driver you want," and then click Next.
- Click Show All Hardware.
- Click the appropriate manufacturer and model of your monitor, click
Next, and then click Finish.
- Click Close, and then click OK.
NOTE: Repeat steps 4-9 for each video adapter for which you have to set a
monitor.
MORE INFORMATION
The third-party product discussed in this article is manufactured by a
vendor independent of Microsoft; we make no warranty, implied or
otherwise, regarding this product's performance or reliability.
| Modification Type: | Major | Last Reviewed: | 8/8/2006 |
|---|
| Keywords: | kb3rdparty kbdisplay kbHardware kbprb KB188243 |
|---|
|