Application Exception in PPD5250 When Set Line Density Is Zero (182066)


The information in this article applies to:

  • Microsoft SNA Server 4.0
This article was previously published under Q182066

SYMPTOMS

An application exception occurs in Ppd5250.dll when print data from an AS/400 contains a Set Line Density (SLD) SCS control code that specifies a value of zero.

CAUSE

The 5250 print provider tries to determine line density by dividing 72 by the value specified in the SLD SCS control code. This results in a divide by zero error and an application exception in Ppd5250.dll if the SLD control code specifies a value of zero.

STATUS

Microsoft has confirmed this to be a problem in SNA Server version 4.0. This problem was corrected in the latest SNA Server version 4.0 U.S. Service Pack. For information on obtaining this Service Pack, query on the following word in the Microsoft Knowledge Base (without the spaces):

S E R V P A C K

MORE INFORMATION

The Set Line Density SCS control code is used to set the numbers of lines per inch for a print job. The SLD control code has the following format: 
Set Line Density (SLD) - '0x2BC6[L](Point)'

Parameter:    [L] - length, including length byte. Value of '0x01'
                denotes default
                Point - Distance to be moved vertically for a single line.
                The number is indicated in typographic points (one point is
                equal to 1/72 inch). Setting a value of '0x0C' will result
                in 6 lines per inch, a value of '0x09' will result in 8
                lines per inch. Value of '0x00' denotes default a value of
                6 lines per inch.
Example: 2BC6020C

The 5250 print provider has been updated so that an SLD with a value of zero is correctly interpreted to indicate a default line density of six lines per inch instead of causing the divide by zero error.
Modification Type:MinorLast Reviewed:9/22/2005
Keywords:kbHotfixServer kbQFE kbbug kbfix KB182066 kbAudDeveloper
©2004 Microsoft Corporation. All rights reserved.