WD98: General Information about Floating Objects (181096)

   Overview
      What Are Objects?
      Description of the Layers of a Document
      How Objects Are Handled in Version 6.0 of Word
      How Objects Are Handled in Version 98 of Word
   Choosing the Appropriate Type of Object
      Floating Objects
         When to Use a Floating Object
         Limitations of Floating Objects
      Inline objects
      Frames
   Changing One Type of Object to Another
      Floating Objects
         To Convert a Floating Object to an Inline Object
         To Convert a Floating Object to a Framed Object
      Inline Objects
         To Convert an Inline Object to a Floating Object
         To Convert an Inline Object to a Framed Object
      Framed Objects
         To Convert a Framed Picture to an Inline Picture
         To Convert Framed Text to Inline Text
         To Convert a Framed Object to a Floating Object
   Troubleshooting Problems with Floating Objects
      Objects Move Around on the Screen, Are Not Inserted or Pasted
      Correctly, or Move to the Next Page
      Objects Disappear When You Insert or Paste Them
      You Cannot See Objects in Some Views
      Objects Cannot Be Inserted or Pasted into a Table or the Table Is
      Split
      You Cannot See Field Codes for Inserted or Pasted Objects
      Fields in the Drawing Layer Don't Work or Return Incorrect Values
				

MORE INFORMATION

Overview

What Are Objects?

"Object" is a generic term used to describe something you insert or paste into a document. Text is usually not considered an object (it is considered text). Examples of objects include the following: In Word 98, there are three basic types of objects. These types and a description of the layers in which they can appear in Word are listed in the following table. For information about the layers in a document, see the "Description of the Layers of a Document" section of this article.

   This type of object           Exists in this layer of Word
   ------------------------------------------------------------

   inline                   Only in the text layer and acts as a
                            single, large character. Text does
                            not wrap around it.

   framed                   Only in the text layer. Text always
                            wraps around it.

   floating                 Only in the drawing layer. Text may
                            or may not wrap around it.
				

Description of the Layers of a Document

   -----------------
   |               |   In this layer you can place objects. Only "floating"
   |               |   objects can exist in this layer. If an object is in
   |               |   this layer, it will appear behind the text of the
   |               |   document (in most cases).
   |               |
   |               |
   |               |
   |               |
   |               |
   -----------------
   Layer 1--Below the text

   -----------------
   | This is the   | Generally speaking, this layer will contain the text
   |  text of      | of your document. You can, however, place objects in
   | the document  | this layer just as you can in the earlier versions
   |               | of Word. You can put the following types of objects in
   |               | this layer:
   |               |
   |               | text--all text and formatting for the document
   |               |
   |               | inline objects - objects that act as a single, large
   |               | character
   |               |
   |               | framed objects--objects that text will flow around
   -----------------
   Layer 2--The text layer

   -----------------
   |               | In this layer you can place objects. Only "floating"
   |               | objects can exist in this layer. If an object is in
   |               | this layer, it will appear in front of the text of the
   |               | document (in most cases).
   |               |
   |               |
   |               |
   |               |
   |               |
   -----------------
   Layer 3--Above the text
				

Word has other layers that behave in the same way as the three layers mentioned here. Other layers include the header/footer layers and the footnote/endnote layers.

How Objects Are Handled in Versions 6.0 of Word

In versions of Word earlier than version 98 for Macintosh, all objects exist in the same layer as the text of the document. You can insert objects "inline" so that they act as a single, large, text character, or you can use a frame. When you "frame" an object you can move the object around in the document by dragging it, and you can get text to flow around the object. Placing a graphic on top of text is virtually impossible in these earlier versions of Word.

A line of text with an "inline" object will resemble the following (with the box being the object):

   text text text text text text text
                  |---|
                  |   |
   text text text |---| text text text text
   text text text text text text text text
				

A line of text with a "framed" object will resemble the following (with the box being the object). The text is said to "wrap" or "flow" around the object:

   text text text text text text text
   text text text |---| text text text
   text text text |   | text text text
   text text text |---| text text text text
   text text text text text text text text
				

How Objects Are Handled in Version 98 of Word

Word version 98 includes a "drawing layer." A drawing layer can be thought of as a clear sheet of paper on top of, and underneath, the text of the document. This gives you the ability to place objects on separate layers above and below the text of the document, in addition to the traditional methods of placing objects in the text layer of the document. You can also stack one object on top of another object in each drawing layer. Objects in either the layer above the text layer or below the text layer are called "floating objects."

Choosing the Appropriate Type of Object

Floating Objects

Floating objects are powerful and flexible enough that you can get them to emulate almost all of the behaviors of inline objects and framed objects. In Word 98, most of the time, you should use a floating object rather an inline or framed object.

When to Use a Floating Object:

Use a floating object when:

• You want text to wrap around the object (although a floating object can be formatted to not allow text wrapping).
  
  Floating objects can have text wrap around them in ways that a framed object cannot. Wrapping styles include Square, Tight, Through, Top And Bottom, and None. Wrapping locations include wrapping to the left side, the right side, the largest side, or both sides of the object
• You want to be able to position the object by dragging it in the document using your mouse.
• You want to be able to position the object in front of or behind the text layer. This is commonly done when creating a watermark.
• You want to use other drawing features with the object.

Limitations of Floating Objects:

Certain features do not work well with floating objects. Generally speaking, fields in the text layer do not recognize fields in the drawing layer. If you need to be able to access information from a field, use a frame. For example, use a frame when the object will include a field that captures any of the following types of information:

   Cross-references

   Captions

   Table of Contents entries

   Index entries

   Table of Figures entries

   Table of Authorities entries
				

NOTE: If you want to be able to view the field codes, you should use a frame rather than a floating object. Note also that you should use a frame if you will want to be able to use the Find And Replace feature to locate the object by object type. For example, you should use a frame if the object is a picture and you want to be able to find it by searching for "Graphic" using the Special search criteria in the Find And Replace dialog box.

For more information about these limitations and for possible workarounds, please see the following articles in the Microsoft Knowledge Base:

Inline objects

Use an inline object when:

• You do not want text to wrap around the object.
• You want to format the object as a character, using tabs, indents, paragraph formatting, character formatting, and so on.
• You want to position the object in a table cell.

Frames

Use a frame when you need an object to behave like a floating object, and you need to use special features with it. For more information, see the "Limitations of Floating Objects" section earlier in this article.

Changing One Type of Object to Another

From time to time, it may be necessary to convert one type of object to another.

Floating Objects

To Convert a Floating Object to an Inline Object:

To convert a floating object to an inline object, use either of the following methods.

NOTE: For Office Art objects, the Float Over Text check box mentioned in the "Method 1" solution will be selected and unavailable. You will be unable to turn off this option. For these objects, use the Method 2 solution.

Method 1: Clear the Float Over Text Check Box:

1. Control-click the floating object.
2. On the shortcut menu, click Format <object>.
3. Click the Position tab.
4. Clear the Float Over Text check box.

Method 2: Use a Macro:

1. Click the object. On the Edit menu, click Cut.
2. Run the macro described in the following article:

   182680 WD98: Picture Is Pasted as Float Over Text Not as Inline

To Convert a Floating Object to a Framed Object:

There may be times when you need your objects to act like floating objects, but you need certain features that are only available when using framed objects. In these few cases, it may be necessary to convert a floating object to a framed object. For more information about when to use a framed versus a floating object, see the "Limitations of Floating Objects" section earlier in this article.

To convert a floating object to a framed object, use either of the following methods.

Method 1: Use an Inline Object

With this method, you will first convert the floating object to an inline object, and then you will convert that inline object to a framed object. To do this, use the following steps:

1. Use the following steps to convert the floating object to an inline object:
   1. Control-click the floating object.
   2. On the shortcut menu, click Format <object>.
   3. Click the Position tab.
   4. Clear the Float Over Text check box.
2. Use the following steps to convert the inline object to a framed object:
   1. Click the object to select it.
   2. On the Tools menu, point to Macro, and then click Macros.
   3. In the "Macros In" drop-down box, click Word Commands.
   4. For the Macro Name, type InsertFrame, and click the Run button.

Method 2: Use the Convert To Frame Option:

Text boxes and callouts have a special Convert To Frame option available that is not available for other shapes. To use this feature, follow these steps:

1. Control-click the text box or callout object.
2. On the shortcut menu, click Format <object>.
3. Click the text box tab.
4. Click the Convert to frame button.

The text box or callout is now a frame in the text layer of the document.

Inline Objects

To Convert an Inline Object to a Floating Object:

1. Control-click the inline object.
2. On the shortcut menu, click Format <object>.
3. Click the Position tab.
4. Click to select the Float Over Text check box.

To Convert an Inline Object to a Framed Object:

1. Click the object to select it.
2. On the Tools menu, point to Macro, and then click Macros.
3. In the Macros In box, click Word Commands.
4. For the Macro Name, type InsertFrame and click the Run button.
   
   NOTE: The first time you run this command, the following message will be displayed:

   You inserted a frame but Insert Frame is not on any menu. Press the button below to add Frame to the Insert menu so you can quickly and easily insert frames.

   Clicking Yes will add the command to the Insert menu.

Once the command is added, you can click Frame on the Insert menu (you will no longer need to use the InsertFrame macro command).

The object will now be in a frame and you can move it around in the document by dragging it.

Framed Objects

To Convert a Framed Picture to an Inline Picture:

1. Control-click the picture.
2. click Format Picture on the shortcut menu.
3. Click the Position tab.
4. Click to clear the Float Over Text check box.

The picture is now an inline picture.

To Convert Framed Text to Inline Text:

1. Control-click the frame.
2. On the shortcut menu, click Format Frame.
3. Click the Remove Frame button.

The framed text will be converted to inline text (standard text in the text layer of the document).

To Convert a Framed Object to a Floating Object:

1. Convert the framed object to an inline object.
2. Use the following steps to convert the inline object to a floating object:
   1. Control-click the inline object.
   2. On the shortcut menu, click Format <object>.
   3. Click the Position tab.
   4. Click to select the Float Over Text check box.

Troubleshooting Problems with Floating Objects

Objects Move Around on the Screen, Are Not Inserted or Pasted Correctly, or Move to the Next Page

This is a side effect of the object being inserted or pasted as a floating object. The solution is to do either of the following.

Method 1:

Paste or insert the object, find it, and then drag it to the desired location, or convert it to an inline object.

For more information, please see the following article in the Microsoft Knowledge Base: Method 2:

Use the information in one of the following Microsoft Knowledge Base articles to change the default behavior of the insert or paste command:

Objects Disappear When You Insert or Paste Them

The object you inserted or pasted may have landed on top of another object. Click the object you just inserted or pasted and drag it using the mouse. You may see another object underneath it. From here, you can position each object in the desired location by dragging it.

The object you inserted or pasted may have landed on another page or on a different part of the current page. Scroll around in the document until you locate it. Then, you can drag it back to the desired location.

You Cannot See Objects in Some Views

Floating objects cannot be seen in normal, outline, or master document view. Switch to online layout or page layout view in order to see the object.

There is also a view setting that needs to be enabled in order to see floating objects. To turn this setting on, follow these steps:

1. On the Tools menu, click options.
2. Click the View tab.
3. Click to select the Drawing Objects check box.

Objects Cannot Be Inserted or Pasted into a Table or the Table Is Split

If you are unable to insert or paste and object or if the table splits into two tables when you insert or paste an object, you must convert the object from a floating to an inline object. To do this, use either of the following methods.

Method 1:

Paste or insert the object, find it, convert it to an inline object, and then cut and paste it into the table cell.

Method 2:

Use the information in one of the following Microsoft Knowledge Base articles to change the default behavior of the insert or paste command:

You Cannot See Field Codes for Inserted or Pasted Objects

The ability (or inability) to view the field code does not change the functionality of the field code. Therefore, there really isn't a need to make the field code visible. If, however, you want to be able to view the field code, you will need to convert the floating object to an inline object or a framed object.

For more information about floating objects and field codes, please see the following articles in the Microsoft Knowledge Base:

Fields in the Drawing Layer Don't Work or Return Incorrect Values

Many fields do not work in the drawing layer. These fields include REF, SEQ, TA, TC, XE, TOA, TOC, AUTONUM, and MERGEFIELD. To use these fields, you must convert the floating object to a framed object.