CSNW Does Not Handle Files Correctly When PBurst Is Enabled (177526)

IMPORTANT: This article contains information about editing the registry. Before you edit the registry, make sure you understand how to restore it if a problem occurs. For information on how to do this, view the "Restoring the Registry" online Help topic in Regedit.exe or the "Restoring a Registry Key" online Help topic in Regedt32.exe.

SYMPTOMS

Client Services for NetWare (CSNW) does not handle files correctly when it receives the packet burst in the wrong order.

When this happens, CSNW and Gateway Services for NetWare (GSNW) actually issue a CloseFileRequest prior to the entire file being transferred, resulting in an incomplete file being loaded.

A subsequent save will overlay the good file on the NetWare server, resulting in lost data.

This behavior also causes the CSNW or GSNW open file (either a Word or Excel document) that is located on the NetWare server to be extremely slow if the NetWare server is on a Wide Area Network (WAN) and the routers are configured with Multi path.

RESOLUTION

WARNING: Using Registry Editor incorrectly can cause serious problems that may require you to reinstall Windows. Microsoft cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk.

For information about how to edit the registry, view the "Changing Keys And Values" online Help topic in Registry Editor (Regedit.exe) or the "Add and Delete Information in the Registry" and "Edit Registry Data" online Help topics in Regedt32.exe. Note that you should back up the registry before you edit it.

Reduce the NWLink packet size or change the Router configuration. To do this, perform the following steps:

Start Registry Editor (Regedt32.exe), and go to the following subkey:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NWLinkIPX \NetConfig\Driverx

NOTE: The above registry key is one path; it has been wrapped for readability.
Edit the following information:
MaxPktSize REG_DWORD Range: 0 to 65535 Default:
Quit Registry Editor and restart your computer.

MORE INFORMATION

The registry key mentioned above specifies the maximum frame size the network adapter card is allowed to transmit. If this number is 0, NWLink gets this information from the card driver.

This value entry allows the administrator to make the maximum transmit size for a card smaller than the card driver allows. A scenario in which you might want to change this entry is in an environment in which the network adapter card on one side of a conversation is on a link that has a larger frame size than the link on the other side of a conversation.

For example, if the sending station is linked to a 16 Mbps Token Ring and the receiving station is linked to an Ethernet network, go to the following registry key and change the information as shown below:

Start Registry Editor (Regedt32.exe), and go to the following subkey:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Paramete
Add the following value:
DefaultMaxPacketSize:REG_DWORD: (Using Decimal value that matches the MAXPKTSIZE value)

-or-

Change the router configuration:

   Parameter MAXPATH=1.

This requires that the path to one computer will be the same (this is not a good choice because routers are configured with multiple paths to insure network reliability).