XCLN: Client Setup Requires a Restart During First Install (165135)
The information in this article applies to:
- Microsoft Exchange Client 4.0
- Microsoft Exchange Windows NT client 4.0
This article was previously published under Q165135 SYMPTOMS
When the Microsoft Exchange Client is installed on a workstation for the
very first time, the Setup program requires that you restart Windows at the
end of Setup. When you use quiet mode setup (setup /q), this restart occurs
automatically. Even if you remove Microsoft Exchange Client completely and
run Setup again, it will not require a restart on subsequent occasions.
CAUSE
The Setup program uses the file Ole32.dll but at the same time wants
to replace the Windows 95 version (dated 7/11/95) with its own newer copy
(3/8/96 for RTM, 7/2/96 for SP2). Because it has been loaded into memory,
Windows must restart to unload the file so it can be replaced.
RESOLUTION
To resolve this problem:
- Replace the existing Win95\System\Ole32.dll file with the newer copy
from the share point before running Setup. The file can be extracted
from Exchng6.cab if necessary.
| Modification Type: | Minor | Last Reviewed: | 8/16/2005 |
|---|
| Keywords: | kbusage KB165135 |
|---|
|