GetLuaReturnCode Mapping Problems and Possible Access Violation (163561)


The information in this article applies to:

  • Microsoft SNA Server 2.1, when used with:
    • the operating system: Microsoft Windows NT
  • Microsoft SNA Server 2.11, when used with:
    • the operating system: Microsoft Windows NT
  • Microsoft SNA Server 2.11 SP1, when used with:
    • the operating system: Microsoft Windows NT
  • Microsoft SNA Server 3.0, when used with:
    • the operating system: Microsoft Windows NT
This article was previously published under Q163561

SYMPTOMS

The following problems occur when calling GetLuaReturnCode() from an RUI or SLI application:
  • The following return codes are not mapped properly: 
       LUA_RECEIVED_UNBIND 0x55
   LUA_DATA_INCOMPLETE 0x60
   LUA_LU_INOPERATIVE 0xFF

   LUA_RECEIVER_IN_TRANSMIT_MODE  0x081B0000
   LUA_SSCP_LU_SESSION_NOT_ACTIVE 0x08570000

   LUA_RESPONSE_ALREADY_SENT  0x10050122
    Also, GetLuaReturnCode reports these unmapped return codes in Intel byte-reversed format. For example, a sense code of 0x081B0000 may be returned as 0x00001B08.
  • If GetLuaReturnCode() receives a primary_rc or the secondary_rc that it doesn't expect, this may lead to an access violation in LUASTR32.DLL.

CAUSE

These problems are caused by deficiencies in the GetLuaReturnCode() function.

RESOLUTION

An update to SNA Server 2.11 Service Pack 1 and 3.0 is available to correct these problems. The updated modules are Luastr32.dll, Winrui32.dll and Winsli32.dll.

STATUS

Microsoft has confirmed this to be a problem in SNA Server versions 2.1, 2.11, 2.11 Service Pack 1 (SP1), and 3.0. This problem was corrected in the latest Microsoft SNA Server 2.11 and 3.0 U.S. Service Packs. For information on obtaining the service pack, query on the following word in the Microsoft Knowledge Base (without the spaces):

S E R V P A C K

Modification Type:MajorLast Reviewed:11/26/2003
Keywords:kbbug kbfix kbnetwork kbprogramming KB163561
©2003 Microsoft Corporation. All rights reserved.