Error When Xcopying from Lan Manager Server (160267)

The information in this article applies to:

Microsoft Windows NT Workstation 4.0
Microsoft Windows NT Server 4.0
Microsoft LAN Manager 2.2

This article was previously published under Q160267

SYMPTOMS

If a Lanman Manager 2.1 Client, Lan Manager 2.2 Server, or IBM OS/2 Warp system attempts to xcopy a file on a Windows NT 4.0 system to itself or location on the same or another Windows NT 4.0 system, the operation will fail as follows:

SYS1192: XCOPY cannot access the source or target drive.

CAUSE

The server is incorrectly responding to the Server Message Block (SMB) C transact2 Query path info, File = <filename>

A network trace will show the following SMB response from the server:

   R transact2 - Server Error, (1) Non-specific error code

The expected response is:

   SMB: R transact2 Open (response)

STATUS

Microsoft has confirmed this to be a problem in Microsoft Windows NT version 4.0. This problem was corrected in the latest Microsoft Windows NT 4.0 U.S. Service Pack. For information on obtaining the service pack, query on the following word in the Microsoft Knowledge Base (without the spaces):

S E R V P A C K

Modification Type:	Major	Last Reviewed:	5/13/2003
Keywords:	kbbug kberrmsg kbnetwork KB160267