Attachmate Advanced Coax Adapter Fails w/Event 23 Qualifier 11 (148996)


The information in this article applies to:

  • Microsoft SNA Server 2.0, when used with:
    • the operating system: Microsoft Windows NT
  • Microsoft SNA Server 2.1, when used with:
    • the operating system: Microsoft Windows NT
  • Microsoft SNA Server 2.11, when used with:
    • the operating system: Microsoft Windows NT
  • Microsoft SNA Server 2.11 SP1, when used with:
    • the operating system: Microsoft Windows NT
This article was previously published under Q148996

SUMMARY

The Attachmate Advanced Coax Adapter may fail with Event 23, Qualifier 11 (DSR failure) if the hardware resources are not set to the following: 
       Base Address: CE000
   I/O Port address: 2D0
                IRQ: 2
These settings must also match on the card using jumper settings. See the Attachmate Coax adapter documentation for details on how to change these settings.

The SNA Server IBM DFT driver must be selected in SNA Server Setup if you use the Attachmate Advanced Coax Adapter, which emulates an IBM 3278/3279 Emulation adapter.

KBCategory: kb3rdparty
KBSubcategory: sna3rdparty
Modification Type:MajorLast Reviewed:11/26/2003
Keywords:kbinfo KB148996
©2003 Microsoft Corporation. All rights reserved.