Stop 0x0000000A When Referencing Empty Sent Queue (148646)
The information in this article applies to:
- Microsoft Windows NT Workstation 3.51
- Microsoft Windows NT Server 3.51
This article was previously published under Q148646 SUMMARY
The following STOP error message in DLC.SYS appears on a Compaq computer
using a Netflex-2 network adapter:
STOP: 0x0000000A (0x00000010,0x00000002,0x00000000,0xFb8eaf87)
NOTE: The fourth parameter, 0xFb8eaf87, may differ each time the STOP error
message appears because the base address for DLC differs from one system to
another.
CAUSE
This problem occurs in the DLC transport when it attempts to access a
NULL sent queue. The sent queue is NULL due to either a spurious interrupt
from the network adapter or a problem with the driver overwriting the
memory location it should not. The Stop error message has occurred using a
Compaq Netflex-2 network adapter with or without the token ring module.
RESOLUTION
To work around this problem, use another supported network adapter. Refer
to the latest Windows NT 3.51 Hardware Compatibility List (HCL).
To correct this problem, apply the fix mentioned below.
STATUS
Microsoft has confirmed this to be a problem in Windows NT version 3.51.
This problem was corrected in the latest Windows NT 3.51 U.S. Service
Pack. For information on obtaining the Service Pack, query on the
following word in the Microsoft Knowledge Base (without the spaces):
| Modification Type: | Major | Last Reviewed: | 10/29/2003 |
|---|
| Keywords: | KB148646 |
|---|
|