No Network Access with 3Com EtherLink 16 and NetBEUI Only (145833)
The information in this article applies to:
This article was previously published under Q145833 SYMPTOMS
When you are using a 3Com EtherLink 16 (3C507) network adapter with only
the NetBEUI network protocol installed, you may be unable to browse or
connect to shared network resources. If you install a second network
protocol, you may still be unable to browse or connect to network
resources shared on computers running only the NetBEUI protocol.
CAUSE
This is a known problem when you use a 3Com EtherLink 16 network adapter
with only the NetBEUI network protocol installed.
RESOLUTION
To work around this problem, use the real-mode drivers for the 3Com
EtherLink 16 network adapter. To do so, follow these steps:
- In Control Panel, double-click Network.
- Click the 3Com EtherLink 16 (3C507) adapter, and then click Properties.
- Click Real Mode (16-Bit) NDIS Driver, and then click OK.
STATUS
Microsoft has confirmed this to be a problem in Microsoft Windows 95.
We are researching this problem and will post new information here in
the Microsoft Knowledge Base as it becomes available.
Modification Type: | Major | Last Reviewed: | 12/17/2000 |
---|
Keywords: | KB145833 |
---|
|