Error Running NTBACKUP On DEC XL 590 Celebris (140370)
The information in this article applies to:
- Microsoft Windows NT Workstation 3.51
- Microsoft Windows NT Server 3.51
This article was previously published under Q140370 SYMPTOMS
When you run the Windows NT Backup Program (NTBACKUP) with an
external SCSI 4MM tape Device (DEC TLZ06) on a DEC XL 590 Celebris
with an embedded NCR SCSI 53C810 controller, the following error
message appears:
Error: The tape device reported an error on a request to
write data to the tape. Error Reported: Bus Reset
The following event appears in the system log:
EventID: 9
Source: Symc8XX
Description: The device, \Device\ScsiPort0, did not respond
within the timeout period.
RESOLUTION
To resolve this problem, do one or all of the following:
- Verify that the SCSI configuration and terminations are correct.
- Check to make sure the System BIOS is current. The current Flash BIOS
available on the DEC BBS as of 11/23/95 is version 2.01.
- Check to make sure you are running the current NCR SCSI 53C810 driver.
The current driver available from SYMBIOS as of 11/23/95 is SYMC8XX.SYS
V2.00.00.
The products included here are manufactured by a vendor independent of
Microsoft; we make no warranty, implied or otherwise, regarding these
products' performance or reliability.
| Modification Type: | Major | Last Reviewed: | 10/23/2003 |
|---|
| Keywords: | KB140370 |
|---|
|