PC Rmt: Err Msg: This Does Not Appear to be Disk 2... (140069)
The information in this article applies to:
- Microsoft Mail Remote for MS-DOS 3.0
This article was previously published under Q140069 SYMPTOMS
After you select a script during the setup of Mail Remote for MS-DOS, you
may get the following error:
Please insert the disk labeled Disk 2 - Supplementary Modem Scripts in
drive A: and press ENTER.
When you insert the Supplementary Modem Scripts disk and press the ENTER
key, you may get the following setup error:
This does not appear to be Disk 2 - Supplementary Modem Scripts.
Please insert the disk labeled Disk 2 - Supplementary Modem
Scripts in drive A: and press ENTER.
CAUSE
The Supplementary Modem Scripts disk in the drive is version 3.5, not
version 3.0.
RESOLUTION
Insert the version 3.0 Microsoft Mail Remote Supplementary Modem Script
disk in the appropriate drive.
If the disk asked for is not available, use the following procedure to
complete the procedure:
- Press the CTRL+X keys to exit the Setup program and return to the
MS-DOS prompt.
- Place the version 3.5 Supplementary Modem Scripts disk in the disk
drive.
- Use the MS-DOS utility EXPAND.EXE to expand the desired script from the
disk.
NOTE: EXPAND.EXE can usually be found in DOS subdirectory.
- Place the disk labeled Remote MS-DOS-based Workstation Version - Disk
1-Setup in the floppy drive, and run the Setup program.
- When the Script Install Selection screen appears, highlight the option
Location of Additional Script files..., and press the ENTER key.
Then continue with the Selected Options.
NOTE: Do not select scripts from the list, as this will cause
the error again.
- The next screen will prompt for the directory or drive that contains
additional modem scripts for Mail Remote. Type the path to the
previously expanded script files as specified in step 4.
| Modification Type: | Major | Last Reviewed: | 11/11/1999 |
|---|
| Keywords: | KB140069 |
|---|
|