Installing Windows NT 3.51 Service Pack 2 on Compaq Computers (140040)


The information in this article applies to:

  • Microsoft Windows NT Workstation 3.51
  • Microsoft Windows NT Server 3.51
This article was previously published under Q140040
After you install a Windows NT 3.51 Service Pack, you must choose Restart Computer to start the updated version of Windows NT 3.51. If you have a Compaq computer with Compaq Support Software Diskette (SSD) version 1.14 or greater, the following steps are recommended:
  1. Before you choose Restart Computer, press ALT+TAB to Program Manager.
  2. Run the Compaq SSD Setup program again. Make sure you look at NTREADME.HLP on the Compaq SSD CD-ROM disc.
  3. Press ALT+TAB to Windows NT Setup (Service Pack Setup) and choose Restart Computer.
The SSD is manufactured by Compaq, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.
Modification Type:MajorLast Reviewed:10/23/2003
Keywords:KB140040
©2003 Microsoft Corporation. All rights reserved.