Windows NT 3.5 Drivers for Compaq Devices (121851)
The information in this article applies to:
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Server 3.5
This article was previously published under Q121851 SUMMARY
In order to install Windows NT 3.5 on a Compaq Deskpro XL566 computer with
a built-in PCI SCSI-II controller, a built-in Netflex network adapter, and
a QVision 2000 video adapter, drivers for these devices are required. These
drivers are available on the Windows NT 3.5 Installation compact disc at
the following locations:
DRVLIB\STORAGE\AMD\X86 (for PCI SCSI-II controller)
DRVLIB\NETCARD\X86\PCNET (for the Netflex network adapter)
DRVLIB\VIDEO\CPQ2000\X86 (for the QVision 2000 video adapter)
They must be copied from these libraries onto separate floppies, and then
used during Windows NT Setup.
MORE INFORMATION
If you do not have a CD-ROM drive or the Windows NT 3.5 Installation
compact disc, you can obtain the drivers from Compaq. Compaq has just
released the official support disk for Windows NT 3.5 for Compaq products
called the Compaq Support Software Diskette (SSD) for Windows NT 3.5
version 1.12a. This will also be available on the Compaq forum on
CompuServe as Softpaq #925. Refer to the README file for a list of drivers.
The Compaq products discussed here are manufactured by Compaq Computer
Corp., a vendor independent of Microsoft; we make no warranty, implied or
otherwise, regarding the products' performance or reliability.
| Modification Type: | Major | Last Reviewed: | 11/4/2003 |
|---|
| Keywords: | kb3rdparty KB121851 |
|---|
|