SNA Err Msg: Configuration Error. Allocation Error.... (121592)


The information in this article applies to:

  • Microsoft SNA Server 2.0
  • Microsoft SNA Server 2.1
  • Microsoft SNA Server 2.11
  • Microsoft SNA Server 2.11 SP1
  • Microsoft SNA Server 2.11 SP2
  • Microsoft SNA Server 3.0
  • Microsoft SNA Server 3.0 SP1
  • Microsoft SNA Server 3.0 SP2
  • Microsoft SNA Server 3.0 SP3
  • Microsoft SNA Server 4.0
  • Microsoft SNA Server 4.0 SP1
This article was previously published under Q121592

SYMPTOMS

When you attempt to connect to an AS/400 through the SNA Server's Win5250 applet, the following error message may appear after the user name and password are entered in the session level sign-on screen:
Configuration Problem
Allocation Error. Security Not Valid. RC 0003 080F6051.

CAUSE

This error condition occurs when the AS/400 device security has been set incorrectly.

NOTE: The following similar error message appears when the incorrect user name and password are entered at the session level sign-on screen, but should not be confused with the aforementioned error condition:
The userid or password is not valid. Try again or contact your system administrator. Primary return code: 0003 Secondary return code: 080F6051

WORKAROUND

To correctly sign on, the Limit Device Access value on the AS/400 needs to be set to "0=Explicit device access not needed." In the failing condition, this value will be set to "1= Explicit device access needed."

To check this value, do the following:
  1. At the AS/400 Main menu, type WRKSYSVAL and then press ENTER. ("WRKSYSVAL" means Work with System Values.)
  2. Scroll down the list to QLMTSECOFR and place a 5 on the adjacent line and then press ENTER.
  3. At the Display System Value screen, change the Limit Device Access value to 0.
Modification Type:MinorLast Reviewed:5/12/2005
Keywords:KB121592
©2004 Microsoft Corporation. All rights reserved.