ErrMsg w/ArtiSoft Noderunner: 2191-You Cannot Stop the Service (121089)
The information in this article applies to:
- Microsoft Windows for Workgroups 3.11
This article was previously published under Q121089 SYMPTOMS
When you are using an Artisoft Noderunner network card, you receive the
following error message
ERROR: 2191 - You cannot stop the service you specified at this time.
when you start Windows for Workgroups or after you run the NET START FULL
command from an MS-DOS command prompt.
CAUSE
By default, revisions of the Noderunner card earlier than 6 are not
correctly configured to work with Windows for Workgroups NE2000 or NE1000
drivers. Revisions earlier than 6 come with a disk that configures this
card to an NE1000 only.
RESOLUTION
To properly configure this card for Windows for Workgroups:
- Run the NRCONFIG.EXE or NRSETUP.EXE that ships with the card. In the
configuration option, set the card to be NE1000 compatible. For full
instructions on these files, contact Artisoft technical support.
-or-
- Contact Artisoft for the latest chip revision for the card. Chip
revisions greater than 6 ship with a newer NRCONFIG.EXE or NRSETUP.EXE
that allows the card to work with Windows for Workgroups 3.11 as either
an NE1000 or an NE2000.
| Modification Type: | Major | Last Reviewed: | 10/27/1999 |
|---|
| Keywords: | KB121089 |
|---|
|