Microcom 4232 Modem Connects at 9600 Baud Only (119866)


The information in this article applies to:

  • Microsoft Windows NT Server 3.1
  • Microsoft Windows NT Workstation 3.1
  • Microsoft Windows NT Advanced Server 3.1
  • Microsoft Windows NT Workstation 3.5
  • Microsoft Windows NT Server 3.5
This article was previously published under Q119866
3.10 3.50
WINDOWS
kbnetwork kb3rdparty kbbug3.10 kbbug3.50

SYMPTOMS

When you use Remote Access Service (RAS) with a Microcom 4232 v.32 bis modem connected to a Digiboard PC/16XEM, client machines, including computers with Windows for Workgroups version 3.11 installed, can connect only with the baud rate of 9600 baud.

WORKAROUND

You can work around this problem by doing one of the following:

  • Use one of the available built-in communication ports on your computer.

    -or-
  • Use another supported modem connected to the Digiboard PC/16XEM.

STATUS

Microsoft has confirmed this to be a problem in Windows NT and Windows NT Advanced Server version 3.1 and Windows NT Workstation and Windows NT Server version 3.5. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.



The third-party products discussed here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.
Modification Type:MajorLast Reviewed:12/15/2003
Keywords:KB119866
©2003 Microsoft Corporation. All rights reserved.