INFO: How GDI Sends Data to the Printer (112387)


The information in this article applies to:

  • Microsoft Windows Software Development Kit (SDK) 3.1
This article was previously published under Q112387
3.10 WINDOWS kbprg

SUMMARY

If the "Fast Printing Direct to Port" option is enabled from the Microsoft Windows Control Panel, print-job data will be sent directly to the printer port, using COMM.drv. Otherwise, MS-DOS _lwrite() calls will be used to write data to the port. The Fast Printing Direct to Port setting corresponds to the DosPrint entry in the [Windows] section of WIN.ini.

MORE INFORMATION

When a print job is started by a printer driver, the printer driver will call into GDI, using the OpenJob() function. Within OpenJob(), GDI uses the following sequence of steps to determine whether to print directly to the port, or to use MS-DOS _lwrite:
  1. Attempts to call the network driver's WNetOpenJob() function, if that function exists. If WNetOpenJob succeeds, indicating that the port is a redirected network port, GDI will use _lwrite() to write to the port, regardless of the "Fast Printing Direct to Port" setting. Otherwise
  2. Checks to see if "Fast Printing Direct to Port" is selected. If it is not selected, GDI will use _lwrite() to write to the port. Otherwise:
  3. Calls OpenComm() for the selected port. If OpenComm() succeeds, the communications API, which call into COMM.drv, will be used to write to the port [WriteComm()]. Otherwise:
  4. Uses _lwrite().
Modification Type:MinorLast Reviewed:2/11/2005
Keywords:kb16bitonly kbinfo KB112387
©2004 Microsoft Corporation. All rights reserved.