WinPopup Sends Multiple Messages to a Workgroup (112198)


The information in this article applies to:

  • Microsoft Windows for Workgroups 3.11
This article was previously published under Q112198

SYMPTOMS

When a WinPopup message is sent to a workgroup, everyone in that workgroup may receive the message multiple times. The number of times the message is received is dependent on what protocol(s) the sending machine is using.

STATUS

Microsoft has confirmed this to be a problem in Microsoft Windows for Workgroups version 3.11. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.

MORE INFORMATION

The following behavior has been reported:

  • If you use only the NetBEUI protocol on the sending workstation, members of the workgroup receive one message.
  • If you use only the IPX/SPX Compatible Transport on the sending workstation, members of the workgroup receive one message.
  • If you use only the IPX/SPX Compatible Transport with NetBIOS on the sending computer, members of the workgroup receive two messages.
  • If you use the NetBEUI protocol and the IPX/SPX Compatible Transport on the sending machine, members of the workgroup receive two messages.
  • If you use the NetBEUI protocol and the IPX/SPX Compatible Transport with NetBIOS on the sending workstation, members of the workgroup receive three messages.
  • If you use the NetBEUI protocol and TCP/IP on the sending machine, members of the workgroup receive three messages.
  • If you use the NetBEUI, IPX/SPX Compatible Transport, and TCP/IP on the sending workstation, members of the workgroup receive four messages.
Modification Type:MajorLast Reviewed:9/26/1999
Keywords:KB112198
©2002 Microsoft Corporation. All rights reserved.