After WFWG Install, Can't Access NetWare Servers Using IPXODI (111684)
The information in this article applies to:
- Microsoft Windows for Workgroups 3.11
This article was previously published under Q111684 SYMPTOMS
After you install Microsoft Windows for Workgroups version 3.11, you cannot
access your Novell NetWare servers using IPXODI.
CAUSE
If you are not using a NET.CFG file with the Novell IPXODI stack, Windows
for Workgroups Setup creates one and places it in the Windows directory. In
order for the contents of the NET.CFG file to be read, it must be located
in the same subdirectory as LSL.COM.
STATUS
Microsoft has confirmed this to be a problem in Windows for Workgroups
version 3.11. We are researching this problem and will post new information
here in the Microsoft Knowledge Base as it becomes available.
RESOLUTION
To correct this problem, move the NET.CFG file to the same directory in
which the Novell LSL.COM file resides and then update your PROTOCOL.INI
file. To update PROTOCOL.INI:
Modification Type: | Major | Last Reviewed: | 10/29/1999 |
---|
Keywords: | KB111684 kbAudDeveloper |
---|
|