WFWG: Racal NI6510 Driver Doesn't Work with Etherblaster NIC (111466)
The information in this article applies to:
- Microsoft Windows for Workgroups 3.11
This article was previously published under Q111466 SYMPTOMS
If you use the Racal NI6510 network interface card (NIC) driver that ships
with Windows for Workgroup 3.11 and you have the Racal Etherblaster network
card installed in your system, you may receive the following error messages
after you reboot your computer:
Error 5751: The Network Adapter Could Not Be Found
Error 7306: The ILANAT.DOS Driver Failed To Initialize
Error 5735: Protocol Manager has reported that a network adapter
cannot be found.
CAUSE
Although Microsoft does not ship an NDIS 3 driver for this card, the NDIS 2
driver (NI6510.DOS) should work correctly with the Etherblaster. However,
Racal has confirmed that the driver shipped with Windows for Workgroups
3.11 does not work with this NIC.
RESOLUTION
To correct this problem, you must use the NI6510.DOS driver from Racal. If
you have a modem, you can download this driver from the Racal bulletin
board service at (508) 264-4345. The file date is 9/17/93 and the file size
is 11,124 bytes. Racal will have an NDIS 3 driver for this NIC available in
the future.
For more information, call Racal Technical Support at (800) 526-8225.
| Modification Type: | Major | Last Reviewed: | 10/27/1999 |
|---|
| Keywords: | KB111466 |
|---|
|