The AMI Enterprise III May Not Use More Than 64 MB (109081)
The information in this article applies to:
- Microsoft Windows NT Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
This article was previously published under Q109081 SYMPTOMS
When you run Windows NT on an AMI Enterprise III that has more than 64 MB
of RAM, only the first 64 may be recognized. As Windows NT loads, NTDETECT
reports only 65536K (64M) (this value is displayed at the top of the blue
screen as Windows NT loads).
CAUSE
This problem is caused by memory that has not been configured properly with
the EISA configuration utility.
RESOLUTION
According to AMI Technical Support, some EISA utilities are shipped with
the motherboard, but you will need a specific EISA utility to properly
configure the memory in the EISA CMOS. The necessary file (SER68CFG.ZIP)
can be downloaded from the AMI BBS at (404) 246-8780.
For additional information, call AMI technical support at (404) 263-8181.
The Enterprise III is manufactured by AMI, a vendor independent of
Microsoft; we make no warranty, implied or otherwise, regarding this
product's performance or reliability.
| Modification Type: | Major | Last Reviewed: | 11/20/2003 |
|---|
| Keywords: | kbHardware KB109081 |
|---|
|