WFWG Err Msg: Network Busy (106272)
The information in this article applies to:
- Microsoft Windows for Workgroups 3.1
- Microsoft Windows for Workgroups 3.11
This article was previously published under Q106272 SYMPTOMS
When you attempt to start the network redirector, connect to a network
drive, printer, or any other network device, the following error message
may be displayed:
Network Busy
CAUSE
The "Network Busy" error message is usually caused by some type of
hardware problem; it is rarely caused by the network being busy. Below
are the most common causes of this error message:
- Interrupt (IRQ) conflict
- I/O address conflict
- RAM address conflict
- DMA conflict
- Hub/Concentrator/Bridge/Router problem
- Problem with another computer on the network
- Disconnected or faulty cabling, connectors, or terminators
- Faulty network card (on the local or a remote computer)
- Incorrect Transceiver Type selection
- Duplicate computer name on network
- Incorrect network interface card (NIC) driver
| Modification Type: | Major | Last Reviewed: | 10/13/2003 |
|---|
| Keywords: | KB106272 |
|---|
|