NCR Model 3450 or Model 3550 Processor Support in Windows NT (105307)
The information in this article applies to:
- Microsoft Windows NT Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
This article was previously published under Q105307 SUMMARY
In order for Windows NT to use more than one microprocessor with the
NCR System 3000 Model 3450 or Model 3550, an updated Hardware
Abstraction Layer (HAL) from NCR Corporation must be installed.
Windows NT will operate with these computers with more than one
processor installed, but it will only use one processor.
NCR Models 3450 and 3550 are listed as tested multiprocessor systems
and appear on page 18 of the Windows NT Hardware Compatibility List
under "x86 Architecture Multiprocessor Computers."
To obtain the updated Hardware Abstraction Layer, call NCR at
(800) GO-WINNT (469-4668).
NCR provides support for models 3450 and 3550 and the updated Hardware
Abstraction Layer.
NCR Computer Models 3450 and 3550 are manufactured by NCR Corporation,
a vendor independent of Microsoft; we make no warranty, implied or
otherwise, regarding these products' performance or reliability.
| Modification Type: | Major | Last Reviewed: | 4/12/2004 |
|---|
| Keywords: | kbHardware KB105307 |
|---|
|