Using a Sound Blaster Pro with the Sound Blaster 1.x Driver (102535)
The information in this article applies to:
- Microsoft Windows NT Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
This article was previously published under Q102535 SUMMARY
When using the Sound Blaster 1.x driver provided with Windows NT to
run with the Sound Blaster Pro, the DMA channel must be set to 1.
The Sound Blaster 1.x driver has two settings for DMA: Off and DMA
channel 1. The Sound Blaster Pro has three settings: DMA channels 0,
1, and 3.
DMA channel 1 must be used because it is the only setting in common
between the adapter and the driver.
| Modification Type: | Major | Last Reviewed: | 11/20/2003 |
|---|
| Keywords: | kbHardware KB102535 |
|---|
|