|
TITLE: |
ROM Image for Evo N400c (686AW) Remote ROM Flash |
|
VERSION: |
2003.03.28 Rev A |
|
DESCRIPTION: |
This SoftPaq creates files that contain a binary image for the System ROM forthe Evo models listed below with a 686AW Family ROM. This SoftPaq is used toflash the System ROM on target PCs on a network, and it requires SystemSoftware Manager (SSM) or Remote Management Setup. The ROM Family and ROM datecan be determined by running the Setup Utility by pressing F10 on the targetcomputer during system power on of the computer, and viewing File/SystemInformation. |
|
PURPOSE: |
Recommended Update |
|
SOFTPAQ NUMBER: |
SP24371 |
|
SUPERSEDES: |
SP22780 |
|
EFFECTIVE DATE: |
April 25, 2003 |
|
CATEGORY: |
ROMPaq |
|
SSM SUPPORTED: |
Yes |
|
PRODUCT TYPE(S): |
Notebooks |
|
PRODUCT MODEL(S): |
Evo N400c Series |
|
OPERATING SYSTEM(S): |
Microsoft Windows 2000 Microsoft Windows 98 Microsoft Windows NT 4.0 Microsoft Windows XP 32-bit Home Microsoft Windows XP 32-bit Professional |
|
LANGUAGE(S): |
Global |
|
FIXES: |
- Fixes issue where notebook would lose time if a Hard Disk Drive (HDD) was added as a second drive in the MultiBay. |
|
PREREQUISITES: |
Compaq System Software Manager |
|
HOW TO USE: |
1. Download the SoftPaq to a temporary, empty directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. The BIOS/ROM image file must be used with Remote Management Software in order to actually flash (upgrade) the ROM image on one of the affected Evo notebooks. 3. When used with SSM, copy the SoftPaq to the file store. 4. When used with WINFLASH, run the SoftPaq to get the .cab file. IMPORTANT: DO NOT TURN OFF POWER TO THE COMPUTER WHILE PERFORMING THIS PROCEDURE! Copyright (c) 2003 Hewlett-Packard Development Company, L.P. |