|
TITLE: |
ROMPaq for Presario 2800/Evo N800c/Evo N800v (68P4M ROM) |
|
VERSION: |
F.1C Rev A |
|
DESCRIPTION: |
This SoftPaq creates a ROMPaq firmware diskette that can be used to locallyrestore or upgrade the System ROM in the Presario/Evo models listed below witha 68P4M Family ROM. The ROM Family and ROM date can be determined by runningthe Setup Utility by pressing F10 on the target computer during system poweron of the computer, and viewing File/System Information. |
|
PURPOSE: |
Routine Release |
|
SOFTPAQ NUMBER: |
SP24310 |
|
SUPERSEDES: |
SP23729, SP23293 |
|
EFFECTIVE DATE: |
April 25, 2003 |
|
CATEGORY: |
ROMPaq |
|
SSM SUPPORTED: |
No |
|
PRODUCT TYPE(S): |
Notebooks |
|
PRODUCT MODEL(S): |
Compaq Evo N800c Compaq Evo N800v Compaq Presario 2800 Series |
|
OPERATING SYSTEM(S): |
Microsoft Windows 2000 Microsoft Windows XP 32-bit Home Microsoft Windows XP 32-bit Professional |
|
LANGUAGE(S): |
Global |
|
FIXES: |
- Fixes issue where system serial number was lost after upgrade to the new BIOS. - Fixes variation in the noise of the fan when in motion. - Fixes error where L1 cache shows only 16KB instead of 20KB in F10 Setup. - Fixes error where FDISK could only see 8GB of 40GB and 60GB in the Multibay Hard Drive. |
|
PREREQUISITES: |
N/A |
|
HOW TO USE: |
1. Download the SoftPaq to a temporary, empty directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. From that drive and directory, execute the downloaded file and follow the on-screen instructions. 3. After the diskette has been created, you may delete the SoftPaq file downloaded in step 2. 4. Turn off the computer. 5. Place the newly created Compaq Presario 2800/Evo N800c/v Series ROMPaq Diskette in Drive A: and turn on the computer. IMPORTANT: DO NOT TURN OFF POWER TO THE COMPUTER WHILE PERFORMING THIS PROCEDURE! Copyright (c) 2003 Hewlett-Packard Company. All Rights Reserved. |