TITLE: ROM Image for Compaq Evo N610c (68P4F) Remote ROM Flash

VERSION: E.01 Rev A
DESCRIPTION:
This SoftPaq creates files that contain a binary image for the System ROM for
the Evo models listed below with a 68P4F Family ROM. This SoftPaq is used to
flash the System ROM on target PCs on a network, and it requires System
Software Manager (SSM) or Remote Management Setup. The ROM Family and ROM date
can be determined by running the Setup Utility by pressing F10 on the target
computer during system power on of the computer, and viewing File/System
Information.

PURPOSE: Recommended Update
SOFTPAQ NUMBER: SP22516
SUPERSEDES: SP22094
EFFECTIVE DATE: September 19, 2002
CATEGORY: ROMPaq
SSM SUPPORTED: Yes

PRODUCT TYPE(S):
Notebooks
 
PRODUCT MODEL(S): 
Evo N610c

OPERATING SYSTEM(S): 
Microsoft Windows 98
Microsoft Windows NT 4.00
 
LANGUAGE(S): 
US English

ENHANCEMENTS:
 - Adds new microcode to support P4M C1 and Celeron C1 CPU.

FIXES: 
 - Fixes pointstick auto move issue.
 - Fixes issue where Celeron processor does not boot on DC power.
 
PREREQUISITES: 
Compaq System Software Manager
 
HOW TO USE: 

1. Download the SoftPaq to a temporary, empty directory on your hard drive. The
file downloaded is a self-extracting executable with a filename based on the
SoftPaq Number above.

2. The BIOS/ROM image file must be used with Remote Management Software in
order to actually flash (upgrade) the ROM image on one of the affected Evo
notebooks.

3. When used with SSM, copy the SoftPaq to the file store.

4. When used with WINFLASH, run the SoftPaq to get the .cab file.

IMPORTANT: DO NOT TURN OFF POWER TO THE COMPUTER WHILE PERFORMING THIS
PROCEDURE!
 
 
Copyright (c) 2002 Compaq Information Technologies Group, L.P.
Compaq and the Compaq logo are trademarks of Compaq Information Technologies
Group, L.P. in the U.S. and other countries.
All other product names mentioned herein may be trademarks of their respective
companies.