TITLE:  Compaq WL100 Wireless 11-Mbps PC Card Support Software for Windows XP 

VERSION:  3.6.7.0
DESCRIPTION:  
This contains the Windows XP driver to support the Compaq WL100 Wireless 11-Mbps 
802.11 PC Card on the notebook models listed below running Windows XP. 

NOTE: This is the same driver that was in SoftPaq SP20459, however that SoftPaq
      caused Plug and Play to stop working for USB devices.

PURPOSE:  Recommended Update 
SOFTPAQ NUMBER:  SP21265
SUPERSEDES:  SP20459
PART NUMBER:  146927-00A-001
EFFECTIVE DATE:  May 28, 2002
CATEGORY:  Network
SSM SUPPORTED: No

PRODUCT TYPE(S):
Notebooks

PRODUCT MODEL(S): 
Presario 1200xx:   1200US, 1201S, 1210US, 1212CL, 1214SR, 1215US, 1216US
Presario 1700xx:   1700US, 1701CL, 1701S, 1710TW
Presario 1800xx:   1800US, 1801S
Presario 2700xx:   2700US

Armada M300 Family: All Models
Armada M700 Family: All Models
Armada E500 Family: All Models
Armada 110: All Models

Evo N200: All Models
Evo N400C: All Models
Evo N600C: All Models

OPERATING SYSTEM:
Microsoft Windows XP 32-bit Personal
Microsoft Windows XP 32-bit Professional

LANGUAGEs:  English

Fixes: 
 - Removed executable in SP20459 that caused a problem with USB Plug and Play devices.
 - Fixes Plug and Play issue caused by SP20459

PREREQUISITES:  N/A

Standard Installation

   To install the drivers:

   1. Download and run the Softpaq.  Drivers will be copied to the appropriate system 
      folders.
   2. Insert WL100 Wireless PC Card into Windows XP computer.  The hardware should find 
      the drivers.  This should be highlighted in the systray at the bottom right or your 
      desktop.
   3. Your device should be ready for configuring.  You may receive prompts from the 
      systray that a new network device has been installed.  It may also prompt that the 
      user view available networks to select a network with which to connect.  The user 
      must initially select a network to begin using this device.
   4. See wireless parameters below.  


Upgrading previous installation

    If you have previously installed a version of the WL100 Wireless XP drivers, you are 
    required to do a driver update:

    1. With the WL100 inserted, download and run the softpaq, you may be required to 
       uninstall a previous configuration utility, if so, please follow the dialog boxes 
       for uninstallation.
    2. Click the Start button.
    3. Click on "Control Panel".
    4. Click on "Switch to Classic View"
    5. Double click on "System".
    6. Click on the Hardware Tab.
    7. Click on the Device Manager Button.
    8. Double click on the Network Adapter section.  (If the WL100 Wireless Adapter is not 
       listed, it may be under Unknown Devices).
    9. Right click on the WL100 device.
   10. Select "Update Driver" from the pop-up list.
   11. See Wireless parameters below.


Wireless Parameters

    You can now edit your wireless parameters in the Windows XP wireless 
    configuration utility. Click on the network icon in your system tray 
    for the iPAQ Wireless PC Card Adapter. Select the wireless network to 
    connect to, or click "Advanced" to enter more parameters (suggested).

    Configure one of the available networks.  If using WEP, uncheck "The key 
    is provided for me automatically".  Notice that the Key index is different 
    in Windows XP versus the configuration utility in other operating systems.  
    For XP, the index range is 0 to 3, whereas in other operating systems and 
    in the Access Point Manager it is 1 to 4.  You must map this number to the 
    correct setting for your Access Point by subtracting 1 from the setting your 
    Access Point is using. It is recommended that on the Authentication tab you 
    uncheck "Enable network access control using IEEE 802.1X".



Copyright (c) 2002 Compaq Information Technologies Group, L.P.

Compaq and the Compaq logo are trademarks of Compaq Information Technologies Group, L.P. 
in the U.S. and other countries.
All other product names mentioned herein may be trademarks of their respective companies.