Ark Logic 2000PV Windows NT 4.0 Driver Installation *** Important Notice *** Ark Logic does not provide support for this driver and Diamond will provide assistance for installation only. As a convenience we have posted the driver for Diamond customers. By using this driver, you have accepted responsibility for any issues that may develop with your computer system once you have installed this driver. 1. Change the video driver in Windows NT 4.0 to Standard VGA. 2. Open the Windows NT Control Panel. 3. Select the Display icon. 4. Select the Settings tab. 5. Select Display Type. 6. Select Change. 7. Select Have Disk. 8. You will now be presented with a list of driver entries. Select: Have Disk. Browse to the location of the folder where the drivers are located and select OK. 9. Choose the ARK Video Accelerator. 10. Select OK. 11. A "Third-party Drivers" dialog box will appear, select Yes to proceed. 12. A "Installing Driver" dialog box will appear confirming that the driver has been successfully installed, select OK. 13. Select Close. 14. Select Close. 15. A "System Settings Change" dialog box will appear, select Yes to restart the computer. You need to restart Windows NT 4.0 for the changes to take place. Note that the default resolution that installed is 640x480x8 60Hz. From this point on, you can change your resolution/color depth by using the Display Icon in the Control Panel. Select the "List All Modes" button. This will display all resolutions and refresh rates available. Please use the Test option so that you can confirm that the selected refresh rate and resolution is supported by your monitor. Note: Driver failed to pass Microsoft's HCT ( Hardware Compatibility test ) at Diamond. If you experience application problems you can consider the Diamond Upgrade Offer information available on Diamond’s Web Site at: http://www.diamondmm.com/product-support/drivers/stealth64g-2001s.html