======================================================================= Fire Gl 1000 Pro Series README.TXT Windows 95 Rel. 1097 ======================================================================= Release Notes ------------- This is v4.10.01.2102-0240 of the Fire Gl 1000 Pro Windows 95 driver set. Manual Installation Instructions -------------------------------- 1. Once you have confirmed that you are running in Standard VGA, place the Fire Gl 1000 Pro Windows 95 Driver Diskette 1/2 into the floppy drive. 2. Open the Windows 95 Control Panel. 3. Select the Display icon. 4. Select Settings and Advanced Properties. 5. Select Change. 6. Select Have Disk. 7. Confirm that the Driver Diskette is in A: (or you can change the drive letter if the driver diskette is in another drive). 8. You will now be presented with a list of driver entries. Select: Fire Gl 1000 Pro 9. You will then be prompted to change your system configuration. Select Yes. 10. When prompted to install Current or New drivers, select the New option. 11. Confirm the source path. 12. You need to restart Windows 95 for the changes to take place. Note that the default resolution that installed is 640x480x8 60Hz. From this point on, you can change your resolution/color depth by using the Display Icon in the Control Panel. Select the "List All Modes" button. This will display all resolutions and refresh rates available. Please use the Test option so that you can confirm that the selected refresh rate and resolution is supported by your monitor. Known Limitations -------------------------------- 1. While running Quake II in OpenGL mode, you may experience display problems when switching between full-screen and windowed modes. All product names listed are trademarks or copyrights of their respective owners. ======================================================================= Diamond Multimedia Systems, Inc. (c) 1993-97, All Rights Reserved =======================================================================