Orchid Technology Celsius 
                      Driver Release v1.32
                --------------------------------

The file you downloaded, CEL.EXE contains the complete Celsius 
driver disk v1.32.  This file contains instructions for 
installing the Celsius drivers you have just downloaded.  You 
have already completed the first step, by unpacking the CEL file 
and reading this.  When you unpack CEL.EXE you should have the 
following files:

DISK     ID         28 11-16-93  10:00a
CELSIUS  001    771826 06-07-94   5:33p
INSTALL  DAT     33693 11-16-93  10:00a
INSTALL  HLP     64449 11-04-93  10:00a
CINSTALL EXE    109329 08-10-92  10:00a
DACCHK   EXE       589 10-04-93  10:00a
README   1ST      2934 08-03-94  


1.  Copy all these files to a blank floppy disk.

2.  Log onto your floppy drive and run the CINSTALL.EXE program 
    to install the driver files to your hard drive.  You should 
    run CINSTALL.EXE from DOS, not from Windows.

The CINSTALL.EXE program is menu driven, and fairly self 
explanatory. If you have questions during any part of the 
installation process, press the F1 key for context sensitive 
help.  The drivers on this disk are for DOS and Windows.  If you 
need drivers for OS/2 or Windows NT check the Orchid BBS 
(510)683-0327 or Orchid's library on CompuServe.


NOTE:
-----
Since the release of the v1.32 disk, there has been an update to 
one of the files used for the Windows drivers.  I have packed 
that new file into this BBS and CompuServe release of the driver, 
so technically speaking these drivers are a little different than 
the official v1.32 release disk.  The updated file is 
CELSETUP.CPL.  You don't see it in the file listing above because 
it's compressed into the file CELSIUS.001 (which IS listed 
above).  You'll see the file in your \WINDOWS\SYSTEM\ directory 
if you install the Windows driver.