Orchid Technology
                 GameWave 32 Driver Release v1.4
             ---------------------------------------

The file you have downloaded, GW32.EXE contains the complete 
files from the GameWave 32 driver disk v1.4.  This README.1ST 
file contains instructions for making a floppy installation disk, 
so you can install the new drivers.  You have already completed 
the first step, by unpacking the GW32.EXE file and reading this.  

This driver release is appropriate for the original GameWave 32 
board.  If you have upgraded your ROMs to the InVision ROM set, 
this driver is not appropriate for your board.  You should use 
the driver set called GWINV.EXE.  (If you would like to know 
more about the InVision ROM set, download the file INVISN.TXT 
from the Orchid BBS, or Orchid library on CompuServe, GO ORCHID, 
library 10).  If you have the GameWave 32 Plus, this driver set 
is not appropriate for your board.  You should use the driver set 
called GWPLUS.EXE.  


When you unpack GW32.EXE you should have the following files 
and subdirectory:


disk.id                     27   2-09-95   1:40a  
ginstall.exe           109,329   8-10-92  10:00a  
install.dat             21,368   2-15-95   1:40a  
install.hlp             10,701   2-09-95   1:40a  
mscdex.exe              25,361   5-31-94   6:22a  
readme.1st               4,902   8-03-95   
gw32.001\cdd.sys        11,936  11-03-93   1:40a  
gw32.001\genmid.ld      39,877   3-22-94   1:40a  
gw32.001\gw32.exe       45,669   5-27-94   1:40a  
gw32.001\gw32.ini          163  10-16-93   1:40a  
gw32.001\imaadpcm.acm   17,936   9-02-94  12:00a  
gw32.001\mcicda.drv     13,824   3-10-92   3:10a  
gw32.001\midimap.cfg    36,856   9-24-93   1:40a  
gw32.001\midimap.drv    52,784   3-10-92   3:10a  
gw32.001\mpu401.drv      7,088   3-10-92   3:10a  
gw32.001\msacm.drv      22,816  11-29-94   1:40a  
gw32.001\msadlib.drv    22,064   3-10-92   3:10a  
gw32.001\msadpcm.acm    15,104  11-19-93  12:00a  
gw32.001\mt32.ld        46,047   3-22-94   1:40a  
gw32.001\orchid.wav     32,356  12-06-93   1:40a  
gw32.001\sndblst2.drv   14,464   3-10-92   3:10a  
gw32.001\swcd.sys        5,808   9-14-93   1:40a  
gw32.001\vadlibd.386     5,542   3-10-92   3:10a  
gw32.001\vsbd.386        5,650   3-10-92   3:10a  





Installing the New Driver
-------------------------

1.  The installer program (GINSTALL.EXE) should be run from a 
    floppy disk.  If you didn't unpack GW32.EXE to a floppy disk 
    then do so now.  The packed file has a subdirectory embedded 
    in it.  In order to unpack and create the subdirectory you'll 
    need to use the "-d" option when unpacking the files.  For 
    example:

GW32 A: -d

NOTE:  If your floppy drive letter is not "A:" then substitute 
the appropriate drive letter.  


2.  Log onto your floppy drive and run the GINSTALL.EXE program to 
    install the driver files to your hard drive.  You should run 
    GINSTALL.EXE from DOS, not from Windows.

The GINSTALL.EXE program is menu driven, and fairly self 
explanatory.  If you have questions during any part of the 
installation process, press the F1 key for context sensitive 
help.  Once you have completed GINSTALL, the driver installation 
is complete.  You may need to reboot your system for changes to 
take effect.



Troubleshooting
---------------
1.  The main question Orchid Technical Support receives about 
this driver installation is regarding proper unpacking of the 
!GW32.EXE file.  If the utilities don't seem to be installing 
correctly please review step number 1 in the previous section 
titled "Installing the New Driver" for instructions on 
unpacking the !GW32.EXE file.  If the subdirectory embedded in 
the file isn't unpacked correctly the drivers won't install 
properly.