To reset the current FDDI interface configuration parameters to their
default values, perform the following procedure.
| Step |
Action |
| 1 |
Select Telnet to Module from the
application tree and connect to the module. |
| 2 |
At the Main prompt (Main>),
type Config and press Return. |
| 3 |
At the Config>
prompt, enter interface, followed by a space and the number of the logical
interface you want to reset. Example: Config>interface
10 |
| 4 |
Press Return. The FDDI/n
config> prompt is displayed. |
| 5 |
At the FDDI/n
Config> prompt, enter clear. |
| 6 |
Press Return. The following message is
displayed: For defaults to take effect, restart or reboot is
required. |
| 7 |
Log out of the Telnet session and terminate
the connection. |
| 8 |
From the application tree, click System
> Reset > Restart with Current Settings. |