Patch Name: PHSS_30562

Patch Description: s700_800 11.X OV DP5.00 patch - CS packet

Creation Date: 04/07/19

Post Date: 04/07/28

Hardware Platforms - OS Releases:
	s700: 11.00 11.11
	s800: 11.00 11.11

Products:
	DATA-PROTECTOR A.05.00

Filesets:
	DATA-PROTECTOR.OMNI-CS,fr=A.05.00,fa=HP-UX_B.11.00_32/64,v=HP

Automatic Reboot?: No

Status: General Release

Critical:
	No (superseded patches were critical)
	PHSS_30337: ABORT
	PHSS_29424: ABORT HANG

Category Tags:
	defect_repair general_release critical halts_system
	manual_dependencies

Path Name: /hp-ux_patches/s700_800/11.X/PHSS_30562

Symptoms:
	PHSS_30562:
	Change Request: 8606330245
	  "debug.log" file is filled with messages:

	   "A request 0 came from host <hostname> which is not a
	  cell manager of this client".

	Change Request: 8606362207
	  Backup session cannot be aborted when minimum load
	  balancing equals 2 and first 2 drives report an error.

	Change Request: H555012494
	  Pre-exec script always executes as a remote script.

	Change Request: H555012804
	  An error is reported when attempting to perform
	  a restore.

	Change Request: H555012924
	  The RDS process stops and subsequent backups fail.

	Change Request: H555013175
	  When the minimum load balancing is set to 2 and 2 drives
	  are in failure, the session cannot be stopped.

	Change Request: H555013333
	  During a restore from the STK/ACS library, a mount
	  request is issued to get the correct tape. If confirmed,
	  an incorrect tape is loaded.

	Change Request: H555013337
	  If copy session fails, Data Protector does not log the
	  medium ID to the "media.log" file for tape statistics.

	Change Request: H555013469
	  Post-exec scripts fail to execute.

	Change Request: H555013501
	  CRS may end abnormally.

	Change Request: H555013629
	  Command "omnirpt -list_media -protection NoOfDays" does
	  not properly list tapes whose protection expires in
	  "NoOfDays" as specified in the command.

	Change Request: H555013676
	  Cron job "omnimm -repository_update" may fail with error
	  11 if library has empty slots. Session is marked
	  completed with failures.

	PHSS_30337:
	Change Request: 8606331369
	  Proxy copy backup of an Oracle database with a large
	  number of files can fail due to the maximum number of
	  connections reached. Restore of the proxy copy backup is
	  slow.

	Change Request: H555011939
	  Data Protector internal database (IDB) stops responding
	  after the IDB backup is performed.

	Change Request: H555011989
	  The post-exec script is started even though the pre-exec
	  script has not been run and the "OB2FORCEPOSTEXEC" option
	  is NOT set.

	Change Request: H555011996
	  Data Protector does not properly show a tape capacity
	  when a tape was initialized with the specific size.

	Change Request: H555012094
	  Tape statistic does not work properly if the medium label
	  is empty or changed after formatting.

	Change Request: H555012097
	  Restores of incremental backups can be slow.

	Change Request: H555012114
	  The "omnidb -sap <object> -session <time> -catalog"
	  command reports the following error:

	   "|12:10900| Detail Catalog Database Internal Error."

	Change Request: H555012258
	  After running the "omnidbutil -sos -chkdbpurge" or
	  "omnitrig -run_checks" command, the subsequent backup
	  stops responding.

	Change Request: H555012263
	  a.) CRS quits after cluster failover.

	  b.) RDS ends abnormally when running frequent reports.

	Change Request: H555012346
	  When restoring from two backup objects, the
	  performance between the completion of the first backup
	  object and the beginning of the second backup object
	  is sluggish.

	Change Request: H555012347
	  Unable to delete daily schedules. Problems with
	  "-exclude" statement. 0 bytes schedule files are
	  saved.

	Change Request: H555012374
	  The "omnidb -filesystem <Object> -session <Session_ID>
	  -catalog" command stops responding.

	Change Request: H555012376
	  Deletion of objects from the Data Protector internal
	  database (IDB) is sluggish. Other sessions are waiting
	  indefinetly.

	Change Request: H555012377
	  The "omnirpt -report obj_lastbackup -datalist <backup
	  specification> -debug 1-999" ends abnormally.

	Change Request: H555012383
	  During an EVA backup, the following is reported:

	   "|Critical| From: VBDA@<hostname> "<object>"  Time:
	    <time> Cannot handshake with Media Agent (Details
	    unknown.) => aborting."

	Change Request: H555012428
	  Backup session manager (BSM) intermittently ends
	  abnormally.

	PHSS_29878:
	Change Request: H555007363
	  After the MC/ServiceGuard failover,
	  the MMD service fails to start.

	Change Request: H555011156
	  Backup of the Data Protector internal database (IDB)
	  completes, but "omnidbcheck" reports corruption.

	Change Request: H555011191
	  "Omnidbutil -readhosts" command only displays usage.

	Change Request: H555011230
	  When using Single Server Edition (SSE) of Data
	  Protector, backup session fails with the following
	  error:

	   "|Major| From BSM@<hostname> <object> Time: <time>
	    Device: <device> does not reside on the Cell Manager.
	    It cannot be used for backup under SSE license."

	Change Request: H555011250
	  "Disk_only" option is ignored by "ob2rman".

	Change Request: H555011264
	  Every SNMP trap message is received twice in SNMP
	  management station during the library rescan.

	Change Request: H555011297
	  Purge session does not appear in the GUI purge report.

	Change Request: H555011375
	  Reports with level "Warning" still logged to session
	  output even if report level for Lotus Domino backup,
	  set in integration backup specification, is set to
	  "Critical".

	Change Request: H555011451
	  After tape import, Lotus Notes database restore cannot
	  be performed through the GUI.

	Change Request: H555011572
	  Integration messages without severity are not saved
	  to the IDB.

	Change Request: H555011626
	  Backup starts even if marked as excluded in the
	  backup schedule.

	Change Request: H555011685
	  When failed objects are restarted, following error is
	  reported:

	    "Error-Detail Unknown"

	Change Request: H555011708
	  After mount request, BMA exits and BSM is waiting.

	Change Request: 8606324070
	  Device lock timeout exceeds the time set with
	  the "SmWaitForDevice" global variable.

	PHSS_29424:
	Change Request: H555010502
	  Eject and Enter procedures do not work if a medium
	  for backup is in a mount request state.

	Change Request: H555010530
	  Data Protector does not properly show a tape capacity
	  when a tape is initialized with a specific size
	  defined in the global options file.

	Change Request: H555010550
	  Restore does not use a mount request script.

	Change Request: H555010563
	  RDS ends abnormally with the following message
	  in the RDS log:

	   "Disk device is below MinFreeDiskSpace".

	Change Request: H555010568
	  When kernel parameter maxfiles_lim is set to 32768
	  and nfile to 32678, RDS will loop and consume a lot
	  of CPU when it starts up.

	Change Request: H555010638
	  When there are large numbers of backup specifications
	  holding lots of data in the backup specification
	  header, some of them are not displayed in the Windows
	  GUI.

	Change Request: H555010730
	  CRS intermittently ends abnormally.

	Change Request: H555010756
	  Aborted restore never stops.

	Change Request: H555010817
	  When drives do not become available, session aborts.

	Change Request: H555010860
	  Scheduled backups do not start.

	Change Request: H555010910
	  Device unlocking is not functioning as expected for
	  the Informix backup, when device that is used for
	  backing up Logical Logs "L" resource type is out of
	  DYNAMIC range.

	Change Request: H555010940
	  When running a split mirror backup (SMB) with the
	  Oracle integration, "IpcHandleTable is full (500)"
	  appears in the RDS log.

	Change Request: H555010982
	  Post-exec script does not execute.

	Change Request: H555011074
	  During a boot, Data Protector service daemons
	  are started even when they should be disabled
	  by the "/etc/rc.config.d/omni" settings.

	Change Request: H555011095
	  Backup Session Manager (BSM) ends abnormally
	  when the "omniabort" command is used.

	Change Request: H555011119
	  Linux Media Agent requests UNIX Single Drive license
	  instead of MS Windows NT Single license.

	Change Request: 8606306486
	  Sending catalog data over slow network connections
	  slows down a backup session.

	Change Request: B555017412
	  During an SMB, Disk Agents are started on
	  an application host instead of an backup host.

	PHSS_29147:
	Change Request: H555008723
	  Medium copy is created but session reports that 0 media
	  out of 1 is copied successfully.

	Change Request: H555010030
	  During NDMP Backup Session Data Protector Database gets
	  corrupted, which can be detected by running a
	  "omnidbcheck -sibf" command.

	Change Request: H555010276
	  If tape import session OmniBack II A.03.x is aborted,
	  the following error is reported:

	   "[12:1259] The Catalog Database not in sync with the
	    Media Management Database."

	  And Data Protector database stops reporting details of
	  any backups made before the import session.

	Change Request: H555010280
	  Command "omnidbutil -writedb" fails with error:

	   "[Critical] From: OMNIDBUTIL@<host> ""  Time:<time>
	    [12:1165] Database network communication error."

	Change Request: H555010285
	  Medium import operation fails with message:

	   "[Critical] From: MSM@<host> "datalist" Time:<time>
	    [65:99]Import failed with possible cause:
	     this media already has valid copy in DB."

	Change Request: H555010331
	  Following errors are created daily in debug.log:

	   "<date> <time> OMNIDBUTIL.3732.3224
	    ["db/dc/dcbrowse/dcbrowse.c /main/48":1737] <build>
	    VELOCIS DB ERROR [2] internal error [6] record/set
	    deleted since last accessed (S_DELETED)
	       Error building mpos list. "

	Change Request: H555010378
	  When executing command "/opt/omni/sbin/omnidbutil
	  -purge -filenames -dcbf -days 90 -force", following
	  error is displayed:

	   "****************  DEFAULT ERROR REPORT  ***********
	    [Critical] From: OMNIDBUTIL@<host> ""  Time:<time>
	    CS API has already been initialized.
	    ***************************************************"

	Change Request: H555010380
	  NDMP restore from multiple imported tapes fails with:

	   "[Major] From: RSM@<host> ""  Time:<time>
	       Unknown internal error."

	Change Request: H555010391
	  Backup Session Manager does not start VBDA when min
	  devices are available.

	Change Request: H555010408
	  Data Protector does not properly show tape capacity
	  when it is initialized with specific size.

	Change Request: 8606307557
	  If one of BMA fails in a load-balanced backup, then
	  all other available devices are started and the total
	  amount of started devices is greater than MAX number
	  of devices defined in datalist.

	PHSS_28736:
	Change Request: H555009779
	  Aborted Oracle backup session hangs.

	Change Request: H555009833
	  When "omnitrig" is stopped and "omnisv" is started with
	  "omnisv -start_mon", all services stop.

	Change Request: H555009877
	  Backup specification does not reflect correct
	  schedules.

	Change Request: H555009895
	  "omnidbutil -cdbsync" fails in a non-MOM environment.

	Change Request: H555010043
	  Message "EIPCALREADYINIT" is filling the "debug.log"
	  file.

	Change Request: H555010049
	  Data Protector unlocks busy drive too early.

	Change Request: H555010075
	  When virtual name does not match the hostname of the
	  host currently running as the cell manager, all the
	  scripts are considered as remote exec script.

	Change Request: H555010103
	  Imported catalog from media has catalog protection
	  set to None.

	Change Request: H555010117
	  Data Protector backup hangs and "omnidb" command
	  takes around 20 minutes to execute.

	Change Request: H555010130
	  The existence of "omnitrig" entry in "crontab" is
	  checked periodically. If "omnitrig" entry does not
	  exist in "crontab", failover occurs in cluster
	  environment.

	Change Request: H555010221
	  "omnidbutil -purge -daily" command writes following
	  message to "debug.log" file:

	  "IpcGetInstance: EIPCNOTINIT, returning NULL to
	   IpcCloseConnection DbgDumpStack() - no stack."

	Change Request: H555010234
	  Integration restore hangs if SmWaitForNewClient
	  variable in global file is not properly set.

	Change Request: H555010267
	  When single files are selected for a Zero DownTime
	  Backup (ZDB) restore, the following messages are
	  displayed in the session report:

	  "|Warning| From: VRDA@<hostname> "<mountpoint>"
	   Time:<time>
	   |84:68| /var/opt/omni/tmp/<application_hostname>
	   /<mountpoint>
	   File on the disk is newer than file on the tape =>
	   not restored.

	   |Warning| From: VRDA@<hostname> "<mountpoint>"
	   Time: <time>
	   Nothing restored."

	Change Request: H555010269
	  After OmniBack II A.03.50 tapes with Exchange
	  objects are imported to Data Protector A.05.00,
	  Internal DataBase (IDB) is corrupt.

	Change Request: 8606288256
	  'rc.log' file contains incorrect loggings when Data
	  Protector is started during the boot of the system:

	   "Usage: /sbin/rc2.d/S838omni { start | stop }
	    Output from "/sbin/rc2.d/S838omni start":".

	Change Request: 8606289026
	  Device Flow Report is not working correctly.

	Change Request: 8606298931
	  Instead of positioning the tape to the beginning of the
	  file, backint restore positions the tape to the
	  beginning of the whole object.

	Change Request: 8606300821
	  Executing "crs -redebug" from command line displays
	  a usage summary.

	Change Request: 8606303737
	  Data Protector backup fails with error:

	  "|Major| From: BSM@<host> "<datalist>"  Time: <time>
	   |61:2021|   Host <host>. is not in this cell.
	   Object will not be backed up."

	PHSS_28340:
	Change Request: H555008993
	  Instant Recovery restore of "disk only" sessions of
	  VA or XP backup is not possible.

	Change Request: H555008998
	  When a host backup session is using WakeOnLan option,
	  it can not retry using specified value from the
	  SmMaxAgentStartupRetries option.

	Change Request: H555009008
	  Restore Graphical User Interface (GUI) does not
	  browse nested mountpoints.

	Change Request: H555009017
	  Load balancing does not work correctly in case
	  of mount request.

	Change Request: H555009061
	  In Manager-of-Managers configuration with Central
	  Media Management Database request for pools list
	  report fails.

	Change Request: H555009083
	  In case that Detail Catalog Binary Files do not exist
	  in the Data Protector database, catalog import fails.

	Change Request: H555009194
	  Total blocks and Used blocks of medium are reported as
	  negative numbers.

	Change Request: H555009263
	  "omnidbutil" ends abnormally during "readascii" process.

	Change Request: H555009275
	  Data Protector backup displays error message:

	  "Inet is not responding"

	Change Request: H555009297
	  After aborting host backup the object post exec script
	  does not execute.

	Change Request: H555009322
	  "omnib" started from different scheduler completes
	  successfully,  but the following error is reported
	  to stderr:

	  "SystemErr: |10054| Connection reset by peer"

	Change Request: H555009356
	  Purge advisor reports that filename purge is needed
	  even after the purge is done.

	Change Request: H555009382
	  Running backup on Cell Manager which is inhibited with
	  command: omniclus -clus host_name -inhibit "time"
	  produces default error report and abnormal end of
	  session.

	Change Request: H555009496
	  Import catalog from copy medium is not possible.

	Change Request: H555009560
	  Backup run twice when daylight saving time is changed.

	Change Request: H555009567
	  "debug.log" contains messages that Detail Catalog
	  Binary Files (DCBF) is corrupted, although "omnidbcheck"
	  does not report any error.

	Change Request: 8606280024
	  Report "Extended report on used media" gives wrong info
	  about used media in selected timeframe.

	Change Request: 8606286049
	  "get_info" script returns error:

	   "grep: can't open Protector".

	PHSS_27584:
	Change Request: H555008606
	  SAP offline backup using the VA integration reports
	  the following errors:

	  "|Major| From: BSM@<CM_hostname>
	   "<datalist_or_barlist_name>"  Time: mm/dd/yy hh:mm:ss
	   |61:1002|   The Snapshot Agent named "<agent>"
	   on host <hostname>
	    reached its inactivity timeout of 7200 seconds.
	    The agent on host will be shutdown."

	Change Request: H555008641
	  Whenever there is Data Protector activity going on in
	  the Cell, the update of the NT clients fails.

	Change Request: H555008680
	  When Cartridge Memory Support is activated for drives
	  with the LTO-Ultrium media type, MSM (Media Session
	  Manager) goes into a loop when try to reformatting or
	  listing Cartridge Memory contents.

	Change Request: H555008690
	  If a Manager-of-Managers Server is also a
	  MC/ServiceGuard virtual node, then the command
	  "omnirpt -report list_sessions -timeframe
	   <start_hours_ago><hours_duration>
	   -multicell -no_multiple"
	  lists the matching sessions from this node twice.

	Change Request: H555008716
	  Messages from pre/post exec scripts are not filtered.

	Change Request: H555008722
	  Reporting Email header does not contain device name.

	Change Request: H555008832
	  Filesystem backup fails with an error:

	  "|Major| From: BSM@<computer> "<object>"  Time: <time>
	   |61:3003| Lost connection to VBDA named <object>
	    on host <host>.
	    Ipc subsystem reports: "IPC Read Error
	    System error: |232| Connection reset by peer"

	Change Request: H555008887
	  The connection with the host running SSEA agent is
	  broken.

	Change Request: H555008908
	  When Data Protector tries to backup non-existent SAP
	  redo logs, session is ended as failed.

	Change Request: H555008926
	  Backup uses more devices than configured in backup
	  specification.

	Change Request: H555008950
	  After running "omnidbutil -cdbsync", the Catalog
	  Database is lost.

	Change Request: H555009030
	  The following warning massage is displayed:
	  "|Warning| From: <hostname> "<datalist or barlist name>"
	   Time: mm/dd/yy hh:mm:ss
	   License not available "Zero Downtime Backup Extension
	   for ONE HP SureStore XP""

Defect Description:
	PHSS_30562:
	Change Request: 8606330245
	  Data Protector logs important messages to "debug.log"
	  for eventual troubleshooting. In some environments the
	  number of messages grows rapidly and consumes a lot of
	  disk space.

	  Resolution:
	  The "OB2DISABLEIPCERRDBGLOG" environment variable is
	  introduced in the "omnirc" file. When set to "1", some
	  error messages are not logged in the "debug.log" file.

	Change Request: 8606362207
	  Data Protector tries to lock new devices. When they are
	  not available, it loops indefinitely.

	  Resolution:
	  If there is an unusable device and minimum load balance
	  is set higher than 1, it is decreased.

	Change Request: H555012494
	  Incorrect checking for a local hostname.

	  Resolution:
	  "IPisLocal" is now used to check if the host on which
	  the script should be executed is remote or local. The
	  "OB2REMOTEPREPOSTEXEC" variable is introduced in
	  the "omnirc" file. If set to "1", the script is forced to
	  execute as remote.

	Change Request: H555012804
	  "No more media for restore on device" message is
	  displayed and restore session stops responding. This
	  message may appear when restoring hardlinks (pointing to
	  the same file) that are present on more than one tape.

	  Resolution:
	  Problem fixed in Restore Session Manager (RSM). For this
	  fix to work, set the "RepositionWithinRestoredObject"
	  variable in the global options file to 0.

	Change Request: H555012924
	  One of the Data Protector internal database (IDB) shared
	  libraries is not functioning correctly which causes a
	  failure.

	  Resolution:
	  The new IDB library is provided.

	Change Request: H555013175
	  Data Protector tries to lock devices, but they are not
	  available, so it is looping indefinitely.

	  Resolution:
	  If there is an unusable device and minimum load balance
	  is higher than 1, it is decreased.

	Change Request: H555013333
	  Another tape is loaded instead of issuing another mount
	  request.

	  Resolution:
	  Restore Session Manager (RSM) procedure is improved to
	  issue a mount request until the correct tape is loaded.

	Change Request: H555013337
	  If copy session fails, Data Protector logs tape
	  statistics to the "media.log" file.

	  Resolution:
	  Tape statistics functionality is improved. Data
	  Protector logs tape statistics only when a write or read
	  command is executed.

	Change Request: H555013469
	  This occurs because there were some changes made to
	  executing remote scripts as local when on a local host.
	  Local execution of scripts fails because of an incorrect
	  current working directory that is "/var/opt/omni/log"
	  instead of "/opt/omni/lbin".

	  Resolution:
	  Corrected relative path of an executing script on a
	  local host to be a full path with "/opt/omni/lbin/"
	  preappended.

	Change Request: H555013501
	  On HP-UX 11.x systems it is possible that the "accept()"
	  command on a newly created socket fails due to the
	  ENOBUFS error. CRS ends abnormally if such error occurs.

	  Resolution:
	  Retry was reimplemented on "accept()".

	Change Request: H555013629
	  Command "omnirpt -list_media -protection NoOfDays" lists
	  tapes with expired protection and no protection.

	  Resolution:
	  If option "-protection NoOfDays" is selected, Data
	  Protector lists only tapes whose protection will expire
	  in "NoOfDays".

	Change Request: H555013676
	  Completed with failures exit status is used by Media
	  Session Manager (MSM) on "LIB_RESCAN" when library has
	  empty slots.

	  Resolution:
	  MSM exits with success on "LIB_RESCAN" when total media
	  count is larger than media actually scanned.

	PHSS_30337:
	Change Request: 8606331369
	  Backup agent starts agents for all files at once.
	  Restore of files is performed serially.

	  Resolution:
	  Oracle integration concept is changed extensively.
	  Proxy copy backup and restore performance is enhanced.

	  After the patch installation, copy the new
	  Oracle templates from the
	  "/opt/omni/newconfig/etc/opt/omni/dltemplates
	  /lists/oracle8/" directory to the
	  "/etc/opt/omni/dltemplates/lists/oracle8" directory.

	  Also, perform the upgrade of all Oracle backup
	  specifications stored on the Cell Manager
	  by running the "/opt/omni/sbin/mrgcfg -ora_barlists"
	  command.

	  For more detailed information about changes in the
	  backup concept and backup flow, refer to the Oracle8i/9i
	  chapters of the following disk array guides:

	  -HP OpenView Storage Data Protector HP SureStore Disk
	  Array XP Integration Guide

	  -HP OpenView Storage Data Protector HP SureStore Virtual
	  Array Integration Guide

	  -HP OpenView Storage Data Protector EMC Symmetrix/Fastrax
	  Integration Guide.

	  For more detailed information on changes in the backup
	  specifications, refer to the Oracle chapters of the HP
	  OpenView Storage Data Protector UNIX Integration Guide.

	  Updated versions of these guides are available with the
	  Cell Console (CC) patch DPWIN_00050 and Documentation
	  (DOC) patches PHSS_30331 and DPSOL_00069 or subsequent
	  CC and DOC patches.

	  Part of SSPUX500_047.

	Change Request: H555011939
	  RDS process stops responding after flushing a hot file
	  to the database files. This occurs after the IDB backup.

	  Resolution:
	  Libraries have been fixed.

	Change Request: H555011989
	  The post-exec script is set to execute if the pre-exec
	  script executes without errors. The problem occurs when
	  the session is aborting and the pre-exec script has not
	  been executed yet as its execution status is still set to
	  OK.

	  Resolution:
	  Added additional checking for session manager state to
	  not execute the post-exec script when the state is set to
	  "BSM_STATE_ABORTED".

	Change Request: H555011996
	  Data Protector always shows the real tape capacity
	  although the tape was initialized with the specific size.

	  Resolution:
	  Data Protector properly shows a tape capacity.

	Change Request: H555012094
	  If the medium label is empty, tape statistic did not log
	  information to the "Media.log" file. If the medium label
	  is changed, the old medium label is written to the
	  "media.log" file.

	  Resolution:
	  The medium label is displayed even if it is empty,
	  and the label is now retrieved from the Backup Session
	  Manager (BSM).

	Change Request: H555012097
	  The query that calculates which objects from a full
	  restore chain are required for a restore is time
	  consuming.

	  Resolution:
	  The query is optimized.

	Change Request: H555012114
	  Invalid option "lan" is imported to the Data Protector
	  internal database (IDB).

	  Resolution:
	  On catalog import, the invalid "lan" option is removed
	  if the "OB2IMPORTCATALOGSAP=1" variable is exported to
	  the "omnirc" file.

	Change Request: H555012258
	  Backup stops responding when trying to synchronize
	  with the Data Protector internal database (IDB).

	  Resolution:
	  Backup completes successfully.

	Change Request: H555012263
	  a.) After the failover, CRS quits because the MMD service
	      quits. The MMD service quits because a time-out
	      occurs while obtaining the licensing information.

	  b.) Due to the memory leaks in the RDS extension modules,
	      the memory usage per process increases. Eventually,
	      the reallocation calls fail.

	  Resolution:
	  a.) Licensing information is released when the Data
	      Protector services end abnormally.

	  b.) Memory leaks are eliminated.

	Change Request: H555012346
	  Restore Media Agent performs a serial search between
	  objects instead of seeking to the beginning of the
	  second object.

	  Resolution:
	  Algorithm for searching segment position on the tape
	  is changed. If two objects are more than one segment
	  apart, Restore Media Agent seeks to the beginning of
	  the second object.

	Change Request: H555012347
	  Scheduler has design problems. The "-exclude" is not
	  processed correctly and 0 byte scheduler files are
	  produced.

	  Resolution:
	  Scheduler design is changed.

	Change Request: H555012374
	  If "new line" characters are present in the filenames
	  tablespace in the Data Protector internal database
	  (IDB), the "omnidb -filesystem <Object> -session
	  <Session_ID> -catalog" command stops responding.

	  Resolution:
	  "omnidb" command functions correctly regardless of the
	  type of characters present in the filenames tablespace
	  in the IDB.

	Change Request: H555012376
	  A session spends a long time deleting old objects from
	  the IDB when an expired medium is used, causing other
	  sessions to wait indefinetely. The reason is that the
	  IDB is locked while objects are being deleted.

	  Resolution:
	  Other sessions are allowed to run during a deletion of
	  old objects from the IDB.

	Change Request: H555012377
	  When expanding host objects, the DiskLabel buffer is
	  overflown.

	  Resolution:
	  DiskLabel buffer size is enlarged.

	Change Request: H555012383
	  Media Agent quits when the concurrency number of
	  started Disk Agents is reached and overflown. This
	  happens when the backup session manager (BSM) keeps
	  starting Disk Agents even though the concurrency
	  number is reached.

	  Resolution:
	  Corrected missing concurrency checking in the BSM to
	  not allow starting of additional Disk Agents when the
	  maximum concurrency number is reached.

	  Part of SSPUX500_048.

	Change Request: H555012428
	  BSM quits in the function "BsmOnClose" when trying to
	  set the Disk Agent's "endTime" variable. The pointer
	  to the Disk Agent's structure is invalid at the time
	  the BSM is trying to update it.

	  Resolution:
	  The "endTime" variable setting is moved higher in the
	  "BsmOnClose" function code where the Disk Agent's
	  structure pointer is still valid.

	PHSS_29878:
	Change Request: H555007363
	  After the MC/ServiceGuard failover, the semaphore
	  locking problem and the problem with cleaning a shared
	  memory occur. Since semaphore lock and shared memory
	  are not cleaned after failover, all licenses are
	  taken and there is no free license available for use.

	  Resolution:
	  Semaphores and shared memory are properly cleaned.

	  Part of SSPUX500_041.

	Change Request: H555011156
	  IDB backup consistency check does not take into account
	  the number of errors as "omnidbcheck" does. The number
	  of errors is not 0 although status of consistency check
	  is fine.

	  Resolution:
	  Consistency check counts errors as "omnidbcheck" does.

	Change Request: H555011191
	  "-readhosts" option is not functioning correctly.

	  Resolution:
	  "-readhosts" option is functioning correctly.

	Change Request: H555011230
	  Data Protector does not compare hostnames correctly.

	  Resolution:
	  When Data Protector checks for SSE license,
	  hostnames are compared with a case insensitive
	  function.

	Change Request: H555011250
	  Command line options for the BAR agent contain empty
	  option before "disk_only". "ob2rman" is reading options
	  only until an empty one is found.

	  Resolution:
	  Empty command line option is removed. "ob2rman" option
	  parsing changed to read all command line options.

	Change Request: H555011264
	  Backup Session Manager (BSM) incorrectly checks
	  for NULL message.

	  Resolution:
	  BSM checking for NULL message is functioning correctly.
	  Checking for existence of Media Session Manager (MSM)
	  session is added. If MSM session exists, BSM does not
	  send SNMP messages.

	Change Request: H555011297
	  Report is not generated during a purge.

	  Resolution:
	  Purge report is generated.

	Change Request: H555011375
	  The change of report level is not set.

	  Resolution:
	  After integration backup specification is read,
	  report level is reset.

	Change Request: H555011451
	  Info about the type of session is not written on tape
	  during a backup, while IDB is correctly updated. After
	  the tape import, information about the type of session
	  does not enter the IDB, therefore the object version
	  is not displayed in restore GUI for Lotus Notes
	  integration.

	  Resolution:
	  Problem fixed in BSM and Media Session Manager (MSM).

	Change Request: H555011572
	  Messages without severity are ignored.

	  Resolution:
	  Messages without severity are now properly saved
	  to the IDB.

	Change Request: H555011626
	  Excluded days from backup schedule is incorrectly
	  handled.

	  Resolution:
	  Backup does not starts if it is excluded from
	  the backup schedule.

	Change Request: H555011685
	  After restarting failed objects dialog window pops up.
	  When the dialog is closed an error can be seen in
	  session report window:

	    "Restart of Backup: <SESSION_ID>Error-Detail Unknown"

	  Resolution:
	  Null pointer dereferencing in BSM removed.

	Change Request: H555011708
	  If there are no appendable media available for backup,
	  a mount request is issued and 10 minutes later, the BMA
	  exits without reporting any errors. After this the BSM
	  stops responding until the session is manually aborted.

	  Resolution:
	  BMA is not aborted anymore when it is in
	  MA_STATE_MOUNTREQUEST state.

	Change Request: 8606324070
	  Each time the needed device is released by concurrent
	  session, timeout is reset. If session does not get the
	  device because it is overran by another session, session
	  waits for another "SmWaitForDevice". Theoretically,
	  session can wait for an unlimited amount of time.

	  Resolution:
	  Timeout is reset only at the beginning of the
	  DEVLOCKQUEUE-DEVLOCK state. This is forced by
	  initializing timeout only at the beginning of session
	  and when all needed devices are locked.

	PHSS_29424:
	Change Request: H555010502
	  BSM locks the slot and prevents updates to the Media
	  Management Database (MMDB) part of the IDB.

	  Resolution:
	  New global variable "DisableTestLockonEjectEnter"
	  is introduced in the global options file. If set,
	  the checking of locks is disabled and the IDB
	  can be properly updated.

	Change Request: H555010530
	  Data Protector always shows a real tape capacity
	  although a tape is initialized with a specific
	  size.

	  Resolution:
	  Data Protector properly shows a tape capacity.

	Change Request: H555010550
	  Checking for a mount script is missing.

	  Resolution:
	  Checking for a mount script is added.

	Change Request: H555010563
	  Due to the defect in lib_rm.sl, device falls below
	  MinFreeDiskSpace threshold.

	  Resolution:
	  Defect in the library is corrected.

	  Part of SSPUX500_031.

	Change Request: H555010568
	  32768 is interpreted as a negative number
	  which causes a system to stop responding.

	  Resolution:
	  Defect in the libraries is corrected.

	Change Request: H555010638
	  Data Protector limitation of 80 KB, reserved for
	  the list of backup specifications, is exceeded.

	  Resolution:
	  Backup specification description data which is passed
	  to the GUI twice, also at querying every single backup
	  specification, has been left out to secure more space
	  in the message.

	Change Request: H555010730
	  CRS intermittently ends abnormally
	  on the HP-UX 11.x systems.

	  Resolution:
	  CRS is functioning correctly.

	Change Request: H555010756
	  The Media Agent's flag is set to abort an event
	  if the agent has not been started yet. The session
	  manager is trying to abort a not-started agent.

	  Resolution:
	  The Media Agent's flag is set to ABORTED
	  when the agent is not started yet.

	Change Request: H555010817
	  With particular configurations of load balancing,
	  waiting sessions do not obtain freed-up drives
	  and they abort.

	  Resolution:
	  Session waits when there are no HP-UX or Windows
	  drive licenses available.

	Change Request: H555010860
	  Omnitrig process does not start any backup at all if
	  the "holidays" file includes a syntax error. The
	  "holidays" file is read at the beginning, before
	  omnitrig starts the scheduled backups. In case of
	  a syntax error, omnitrig aborts execution, which
	  prevents omnitrig to read the scheduler files
	  and to execute backups at scheduled times.

	  Resolution:
	  Omnitrig behavior in case of syntax errors in the
	  "holidays" file is changed. Now omnitrig continues
	  with an execution in such cases, which means that
	  the syntax errors are skipped, logged to the
	  "debug.log" file and most important scheduled backups
	  are started.

	Change Request: H555010910
	  When all devices are locked and device used for backing
	  up Logical Logs resource type is not included in the
	  DYNAMIC range, the backup session will stop responding
	  and the backup will not complete successfully.

	  Resolution:
	  Unused device will be unlocked when the global options
	  variable "BackupDeviceIdle" times out. The new device
	  will be locked then and used for a backup session.

	Change Request: H555010940
	  When more than 500 Data Movements Agents (DMA)
	  are started, BSM stops accepting connections
	  as the limit is set to 500.

	  Resolution:
	  Limit is raised to 1000.

	Change Request: H555010982
	  Execution of remote post-exec scripts fails as there
	  were some changes made to execute remote scripts as
	  local when the remote host selected is the local host.
	  Local execution of scripts fails when trying to check
	  if the file is present because of an incorrect "current
	  working directory" which is "/var/opt/omni/log"
	  instead of "/opt/omni/lbin".

	  Resolution:
	  Corrected to set the full path with "/opt/omni/lbin/"
	  pre-appended when a relative path for a post-exec
	  script is given. In this way the file presence check
	  is done in the correct directory tree.

	Change Request: H555011074
	  "/etc/rc.config.d/omni" settings are not checked.

	  Resolution:
	  "/sbin/init.d/omni" now checks "/etc/rc.config.d/omni"
	  to see if the "OMNI" variable is set to 1. If it is
	  not, services are not started.

	Change Request: H555011095
	  When a mount script is configured to issue an
	  "omniabort" command, anytime a mount request is issued
	  and not responded to by the time mount script is
	  called, BSM ends abnormally after the mount script
	  calls the "omniabort" command.

	  Resolution:
	  BSM functions properly when the "omniabort"
	  command is used.

	Change Request: H555011119
	  Data Protector recognizes i686 as non-Intel
	  architecture, hence required license is the UNIX
	  type license.

	  Resolution:
	  Added i686 as possible Linux architecture.

	Change Request: 8606306486
	  Media Agent sends catalog data synchronously and
	  it waits for the acknowledgment from the BSM. If the
	  network connection between the Media Agent client and
	  the Cell Manager system is slow, this can take a long
	  time. During that period, the Media Agent does not
	  write data to the tape.

	  Resolution:
	  User can set the "OB2COMPRESSCATALOG" variable in the
	  "omnirc" file to compress data buffer before sending
	  it over a network. That shrinks data buffer on an
	  average to 12 percent of the original.

	Change Request: B555017412
	  When more than one object is configured
	  for a particular mountpoint in a single SMB backup
	  specification, some of the objects are started
	  on an application host instead of a backup host.

	  Resolution:
	  Disk Agents are started on a backup host.

	PHSS_29147:
	Change Request: H555008723
	  When waiting for cmupdate answer MSG_OPEN is lost.

	  Resolution:
	  Answer for session report is correctly received.

	Change Request: H555010030
	  Meta files are removed although there are still object
	  versions in the Data Protector Database with reference
	  to those meta files.

	  Resolution:
	  Meta files are no longer removed if there are object
	  versions in the Data Protector Database with references
	  to them.

	Change Request: H555010276
	  Database is corrupt when tape import session from
	  OmniBack II A.03.x is aborted.

	  Resolution:
	  Data Protector properly handles abort command.

	Change Request: H555010280
	  If Data Protector database contains a lot of object
	  versions, a 'Stack Frame OverFlow Violation' error is
	  reported in RDS.log and RDS ends abnormally.

	  Resolution:
	  Failing "WriteASCIIOVerTre" function is split into
	  two separate functions.

	Change Request: H555010285
	  It can happen that media positions remain in
	  database. When you try to import the medium
	  an error occurs.

	  Resolution:
	  New "DbForceImportIfPositionsExist" variable is
	  introduced in global file. When set to 1 it forces
	  medium import even if medium positions exist.

	Change Request: H555010331
	  Purge and check purge are started almost at the same
	  time. Purge at 12:00 PM and check purge at 12:01 PM.
	  This causes error messages in debug.log file.

	  Resolution:
	  Time to start check purge is now moved on 12:30 PM
	  by default. Start time purge and check purge can now
	  be scheduled from global file.

	Change Request: H555010378
	  CsaExit() function is not called at correct place.

	  Resolution:
	  CsaExit() function is inserted to right place.

	  Part of SSPUX500_027.

	Change Request: H555010380
	  Meta files are linked to the last medium used by NDMP
	  backup. When importing first (other than last) medium
	  to Data Protector Database, object versions are
	  entered into the Database. Since they already exist
	  in the DB it is assumed that the DB reference to the
	  Meta file also already exists while importing the
	  last tape, but that is not the case.

	  Resolution:
	  Only when the old object versions already contain
	  reference to the meta-file is the old object version
	  copied over the newer and the reference to the meta
	  file is assumed to be already existing. By default
	  reference to meta-file is reestablished.

	Change Request: H555010391
	  When min devices become free, session is started but
	  no VBDAs are started. The Backup Session Manager (BSM)
	  queues  until max devices are free although the min
	  devices were available. BSM changed state from RUNNING
	  to DEVLOCKQUEUE.

	  Resolution:
	  Now BSM cannot return from RUNNING state to state
	  DEVLOCKQUEUE.

	Change Request: H555010408
	  Data Protector always shows real tape capacity although
	  tape is initialized with specific size.

	  Resolution:
	  Data Protector properly shows tape capacity.

	  Part of SSPUX500_028.

	Change Request: 8606307557
	  The algorithm is not taking into account the currently
	  locked and running devices.

	  Resolution:
	  The parameters passed to algorithm are changed.

	PHSS_28736:
	Change Request: H555009779
	  When Oracle integration backup issues a mount request
	  and an attempt to abort backup is made, the omniabort
	  will hang and the session will not shut down.

	  Resolution:
	  Backup Session Manager (BSM) is changed in order to
	  finish aborted Oracle backup successfully.

	Change Request: H555009833
	  "omnisv -start_mon" checks status of all services.

	  Resolution:
	  omnisv -start_mon checks status of all services
	  except omnitrig.

	Change Request: H555009877
	  Schedules with excluded days are interpreted
	  incorrectly.

	  Resolution:
	  Schedule interpretation for excluded days is changed.

	Change Request: H555009895
	  After checking for mom_server file, the error is not
	  cleared.

	  Resolution:
	  After checking for mom_server file, error is cleared.

	Change Request: H555010043
	  Function IpcExit() is never called, so each time the
	  function IpcInit() is called, the error is written in
	  debug log.

	  Resolution:
	  Function IpcExit() calls are places properly,
	  so the error is not reported any more.

	Change Request: H555010049
	  Drive is improperly unlocked when Backup Session
	  Manager tries to stop or abort Backup Media Agent.

	  Resolution:
	  Data Protector properly handles request for
	  unlocking the drives.

	  Part of SSPUX500_021.

	Change Request: H555010075
	  When session is configured using post- or pre-exec
	  scripts on virtual machines, no check is being made to
	  determine if IP address is local. Only hostnames
	  (strings) are compared.

	  Resolution:
	  Additional checking is made to determine if IP address
	  is local.

	Change Request: H555010103
	  When importing catalog, its protection is set to
	  None. When catalog is imported with protection None, it
	  is purged out of database first time purge is
	  started.

	  Resolution:
	  Catalog protection is changed to Permanent
	  after importing.

	Change Request: H555010117
	  For Internal DataBase (IDB) locking Data Protector uses
	  "d_grplock" velocis API that receives an array of
	  locks as parameter. Since the "d_grplock" API is not
	  atomic operation, deadlock can occur. During an
	  Oracle backup there are multiple DataBase Session
	  Managers (DBSM) querying IDB and eventually deadlock
	  situation occurs.

	  Resolution:
	  Velocis libraries are updated.

	  Part of SSPUX500_014 and SSPUX500_020.

	Change Request: H555010130
	  "omnitrig" entry is checked in "crontab" file. If
	  it does not exist, failover to another node occurs.

	  Resolution:
	  Additional command line parameter "timeout" is
	  added in order to specify the checking period. It
	  can be applied by executing the following command:
	  "omnisv -start_mon .timeout <timeout in seconds>".

	Change Request: H555010221
	  "omnidbutil -purge -daily" command writes error
	  message to "debug.log" file because "CsaExit()"
	  functions is called from wrong place.

	  Resolution:
	  "CsaExit()" function is called from correct place.

	Change Request: H555010234
	  Restore Session Manager (RSM) can not handle restore
	  request from the OB2BAR when Media Agent is in
	  stopping state.

	  Resolution:
	  Request list is reset after Media Agent gets MSG_STOP
	  from RSM.

	Change Request: H555010267
	  File names are not appended at the end of the
	  destination string, so Restore Session Manager (RSM)
	  tries to restore the files as mountpoints.

	  Resolution:
	  File names are appended at the end of the destination
	  string.

	Change Request: H555010269
	  OmniBack II A.03.50 IDB records for Exchange objects
	  are not properly re-formatted during tape import
	  procedure.

	  Resolution:
	  Tape import procedure reformats Exchange objects
	  to DP 5.X format during import phase.

	Change Request: 8606288256
	  'omni' script does not contain 'start_msg' and
	  'stop_msg'.

	  Resolution:
	  'start_msg' and 'stop_msg' are added to 'omni' script.

	Change Request: 8606289026
	  Data Protector does not enter "End Time" variable
	  in the database when backup is aborted.

	  Resolution:
	  Data Protector enters "End time" variable in the
	  database when session is aborted or mount request
	  is issued.

	Change Request: 8606298931
	  Restore position for file is not calculated.

	  Resolution:
	  Calculation of file position within object is added.

	Change Request: 8606300821
	  While parsing arguments passed to "crs" binary, missing
	  arguments after "-redebug" options are not expected
	  which causes usage to be displayed.

	  Resolution:
	  When arguments for redebug are not passed on command
	  line, trace file is examined. If trace file does not
	  include parameters, help is written.

	Change Request: 8606303737
	  If system uses "hosts" file for name resolving
	  and an alias has a dot at the end, the
	  "gethostbyname" returns the host name with a dot.

	  Resolution:
	  Host resolving is improved to properly handle hostnames
	  having the dot as the last character.

	PHSS_28340:
	Change Request: H555008993
	  Some Instant Recovery "disk only" sessions of VA or XP
	  backup are automatically purged from velocis database
	  after 30 days. If valid snapshots and Instant Recovery
	  sessions still exists then instant restore is not
	  possible from those disks.

	  Resolution:
	  New Global option "KeepDiskonlySessions" is added
	  and set to 365 days by default.

	Change Request: H555008998
	  When a host backup session is using WakeOnLan option,
	  it can not retry using the specified value from the
	  SmMaxAgentStartupRetries option and there is no
	  mechanism to specify the timeout between retries.

	  Resolution:
	  When a host backup session is using WakeOnLan option,
	  it can retry using specified value from the
	  SmMaxAgentStartupRetries option and specified timeout
	  value from MinDelayForConnectionRetry option.

	Change Request: H555009008
	  Tree options are not entered into Data Protector
	  database during host backup of nested mountpoints.

	  Resolution:
	  Tree options are entered in to Data Protector database.

	  Part of SSPUX500_007.

	Change Request: H555009017
	  In case that mount request appears at the beginning
	  of the backup, load balancing does not work correctly.
	  After the confirmation of mount request, filesystem
	  which is supposed to be started as the first one,
	  is started as the last one.

	  Resolution:
	  Load balancing is improved in order to work correctly
	  in case of mount request.

	Change Request: H555009061
	  In Manager-of-Managers configuration where Database
	  Session Manager acts as a gateway for direct access to
	  Media Management Database, main Database Session
	  Manager is not aware of pools list report and cannot
	  get report information from the Media Management
	  Database.

	  Resolution:
	  Database Session Manager can get pools list report
	  information from the Media Management Database.

	Change Request: H555009083
	  During catalog import Data Protector tries to remove
	  the old binary files and create new ones. In case
	  that old files do not exist, catalog import fails.

	  Resolution:
	  Catalog import is improved in order not to abort,
	  in case that Detail Catalog Binary Files do not
	  exist.

	Change Request: H555009194
	  Data type 'Long' does not allow numbers bigger than 2TB.

	  Resolution:
	  Reported Total blocks and Used blocks of medium are
	  limited to 2TB.

	Change Request: H555009263
	  Files names with new line are not handled correctly.

	  Resolution:
	  "readdb" and "writedb" was changed so that file names
	  with new line are handled correctly.

	Change Request: H555009275
	  Disk Agent starts with the same delay as Media Agent.
	  Disk Agent cannot connect to Inet.

	  Resolution:
	  Global variable "MAStartDelay" is added that provides
	  setting a different delays for Disk Agent and
	  Media Agent by entering different values for
	  "MAStartDelay" and "DAStartDelay".

	Change Request: H555009297
	  Before executing the object post-exec script,
	  Data Protector checks if session is aborting.
	  If it is, then script does not execute.

	  Resolution:
	  Global variable PostExecOnAbortHostBackup was added.
	  If this global variable is set to 1, the post-exec
	  script will execute even if the session is aborting.

	Change Request: H555009322
	  Backup Session Manager (BSM) is going down too fast
	  after sending "MSG_CLOSE" to connected monitors.

	  Resolution:
	  "OB2BSMSLEEPBEFORECLOSE" environment variable is added
	  in order to wait few seconds before going down.

	Change Request: H555009356
	  Purge advisor incorrectly interprets the growth of the
	  database and reports daily needed purges.

	  Resolution:
	  Purge advisor correctly recognizes the database when
	  purge of the database is needed.

	Change Request: H555009382
	  Crs tries to receive messages by inhibited Cell Manager.

	  Resolution:
	  If Cell Manager is inhibited, Data Protector does not
	  send or receive any messages, but exits with message:

	    "|12:1602| Cannot access the Cell Manager system".

	Change Request: H555009496
	  Catalog can not be imported if the medium is a copy.

	  Resolution:
	  Option "-force" is passed in order to import the catalog
	  from copy medium.

	Change Request: H555009560
	  The algorithm, that handles the daylight saving time
	  changes is uncomplete.

	  Resolution:
	  The algorithm is changed for both time changes:
	  02h->03h and 03h->02h.

	Change Request: H555009567
	  "omnidbcheck" does not correctly report corruption in
	  Detail Catalog Binary Files (DCBF).

	  Resolution:
	  "omnidbcheck" is improved in order to correctly report
	  errors on the Detail Catalog Binary Files (DCBF).

	Change Request: 8606280024
	  Data Protector does not properly list the sessions
	  for used media in selected timeframe.

	  Resolution:
	  "Extended report on used media" report is removed from
	  reporting.

	Change Request: 8606286049
	  "grep" command  is used incorrectly in the "get_info"
	  script.

	  Resolution:
	  Usage of "grep" command is improved.

	PHSS_27584:
	Change Request: H555008606
	  Backup Session Manager does not set the timeout of
	  infinitive seconds for the SNAPA agent, but leaves
	  the timeout set to the value of SmDaIdleTimeout.

	  Resolution:
	  Backup Session Manager sets the timeout of infinitive
	  seconds for the SNAPA agent.

	Change Request: H555008641
	  Data Protector erroneously tries to unpack already
	  unpacked error message in "omnicc" and overwrites
	  another variable.

	  Resolution:
	  Error unpacking and variable name are changed.

	Change Request: H555008680
	  Media Agent ends abnormally when listing all
	  Cartridge Memory contents for the specific medium or
	  reformatting Cartridge Memory of a specific medium.

	  Resolution:
	  MSM (Media Session Manager) is improved in order to
	  session finish successfully in case of reformatting
	  cartridge memory or listing cartridge memory contents.

	Change Request: H555008690
	  When running "omnirpt" command all the cell servers from
	  the "mom_info" and the local Cell Server are queried for
	  matching sessions. The virtual node and the local host
	  are actually the same machine, so the matching sessions
	  are listed twice.

	  Resolution:
	  The function gethostname() is not used any more to
	  determine if the inspected host is also the local host,
	  cause in case of a Manager-of-Managers/ServiceGuard
	  environment it returns the physical node hostname and
	  not the virtual node hostname, making the virtual
	  hostname being seen as a non-local host. In this way
	  the virtual hostname is not queried for matching
	  sessions any more.

	Change Request: H555008716
	  Non Data Protector format messages from pre/post exec
	  script are not filtered.

	  Resolution:
	  The Backup Session Manager is changed in order to
	  filter non Data Protector format messages from pre/post
	  exec script.

	Change Request: H555008722
	  Device name is not exported in EVENTOBJECT environment
	  variable.

	  Resolution:
	  Device name is exported in to EVENTOBJECT environment
	  variable.

	Change Request: H555008832
	  Last message from Disk Agent is sometimes lost. This
	  causes Disk Agent's status reported as "Failed".

	  Resolution:
	  New environment variable:
	    OB2VBDASLEEPBEFORECLOSE
	  is introduced.
	  Its default value is 0. Setting it to a positive
	  number, in /<OMNIBACK_HOME>/.omnirc file, it specifies
	  number of seconds to pass before Disk Agent completes
	  after sending the last block of data.
	  Sleep time insignificantly influences backup
	  performance.

	Change Request: H555008887
	  In environments where the firewall between Cell Server
	  and client(s) with firewall idle timeout of <x>
	  minutes is present, it can happen that an agent is in
	  idle state for the amount of time longer than mentioned
	  timeout. In such cases, firewall breaks the connection
	  between Cell Server and the client(s).

	  Resolution:
	  New environment variable OB2IPCKEEPALIVE is introduced.
	  Setting its value to any of YES, TRUE, ON or 1 in
	  /opt/omni/.omnirc file on Cell Server causes sending a
	  dummy package from time to time in order to keep the
	  connection open.

	Change Request: H555008908
	  By design, whenever there are no objects backed up,
	  Data Protector ends session as failed.

	  Resolution:
	  Two new global variables have been introduced:

	  a) SessSucessfullWhenNoObjectsBackedUp
	     Setting this variable to 1 user can change the
	     Data Protector behavior in order to end the session
	     as successful when there are no objects backed up.

	  b) TreatScriptReturnAsNormal
	     Setting this variable to a certain number instructs
	     Data Protector to treat all the script returns equal
	     to the specified number as normal.

	Change Request: H555008926
	  In case of mount request, Data Protector starts
	  additional Media Agent although it is more than
	  specified in backup specification.

	  Resolution:
	  Data Protector is improved in order not to start more
	  Media Agents than specified in backup specification.

	Change Request: H555008950
	  If "omnidbutil -cdbsync" is started on the
	  Manager-of-Managers client, local Media Management
	  Database (MMDB) is used for database synchronization.

	  Resolution:
	  If "omnidbutil -cdbsync" is running on a
	  Manager-of-Managers client, it issues an
	  error message and stops the operation.

	Change Request: H555009030
	  Data Protector never looks for the new TB XP license
	  (B7023CA), but always looks for the old XP standard
	  license (B7023BA). The same is with the new TB EMC
	  license.

	  Resolution:
	  The Backup Session Manager agent looks also for the new
	  TB EMC and TB XP licenses.

Enhancement:
	No

SR:
	H555012804 8606330245 8606362207 H555012494 H555012924
	H555013629 H555013501 H555013469 H555013333 H555013676
	H555013175 H555013337 H555012374 H555012383 H555012376
	8606331369 H555012377 H555011996 H555011989 H555012263
	H555011939 H555012094 H555012346 H555012428 H555012347
	H555012258 H555012097 H555012114 H555011572 H555011297
	H555011250 H555011156 H555011264 H555011191 H555011685
	H555011451 8606324070 H555007363 H555011626 H555011230
	H555011375 H555011708 H555010530 H555011074 H555010550
	H555011095 H555010730 H555010910 H555010563 H555010638
	H555010817 H555010568 H555010940 H555010860 H555010756
	H555010982 8606306486 B555017412 H555010502 H555011119
	H555010285 H555010408 H555010391 H555010030 H555010280
	H555008723 H555010378 H555010331 8606307557 H555010380
	H555010276 H555010075 H555010267 H555009721 H555010269
	8606298931 H555009833 8606303737 8606289026 H555010103
	H555010130 H555010043 H555010221 H555009779 H555010117
	H555009877 8606288256 H555009895 H555010234 H555010049
	8606300821 H555009263 H555009275 H555009356 H555009194
	H555009381 H555009560 H555009382 H555008754 8606280024
	H555009297 8606286049 H555009567 H555009496 H555009008
	H555009017 H555008966 H555009061 H555008993 H555009322
	H555008998 H555009083 H555008606 H555009030 H555008722
	H555008641 H555008891 H555008716 H555008651 H555008832
	H555008887 H555008680 H555008690 H555008908 H555008950
	H555008926

Patch Files:
	
	DATA-PROTECTOR.OMNI-CS,fr=A.05.00,fa=HP-UX_B.11.00_32/64,
		v=HP:
	/sbin/init.d/omni
	/opt/omni/lib/libob2eadm.sl
	/opt/omni/lib/libob2ecdb.sl
	/opt/omni/lib/libob2ecmn.sl
	/opt/omni/lib/libob2emmdb.sl
	/opt/omni/lib/lib_rdm.sl
	/opt/omni/lib/lib_rm.sl
	/opt/omni/sbin/omnitrig
	/opt/omni/sbin/omnidbutil
	/opt/omni/sbin/omnidbcheck
	/opt/omni/sbin/omnisv
	/opt/omni/sbin/mrgcfg
	/opt/omni/sbin/utilns/get_info
	/opt/omni/lbin/bsm
	/opt/omni/lbin/crs
	/opt/omni/lbin/dbbda
	/opt/omni/lbin/dbsm
	/opt/omni/lbin/msm
	/opt/omni/lbin/mmd
	/opt/omni/lbin/rsm
	/opt/omni/newconfig/etc/opt/omni/dltemplates/lists/oracle8/
		Archive
	/opt/omni/newconfig/etc/opt/omni/dltemplates/lists/oracle8/
		Archive_Delete
	/opt/omni/newconfig/etc/opt/omni/dltemplates/lists/oracle8/
		Database_Archive
	/opt/omni/newconfig/etc/opt/omni/dltemplates/lists/oracle8/
		Database_Switch_Archive
	/opt/omni/newconfig/etc/opt/omni/dltemplates/lists/oracle8/
		Database_Switch_ArchiveDel
	/opt/omni/newconfig/etc/opt/omni/dltemplates/lists/oracle8/
		Direct_Database
	/opt/omni/newconfig/etc/opt/omni/dltemplates/lists/oracle8/
		SMB_Database
	/opt/omni/newconfig/etc/opt/omni/dltemplates/lists/oracle8/
		Whole_Online
	/opt/omni/newconfig/etc/opt/omni/dltemplates/lists/oracle8/
		Whole_Online_Delete
	/opt/omni/newconfig/etc/opt/omni/dltemplates/lists/oracle8/
		SMB_Database_Oracle8
	/opt/omni/newconfig/etc/opt/omni/options/global

what(1) Output:
	
	DATA-PROTECTOR.OMNI-CS,fr=A.05.00,fa=HP-UX_B.11.00_32/64,
		v=HP:
	/sbin/init.d/omni:
		None
	/opt/omni/lib/libob2eadm.sl:
		HP OpenView Storage Data Protector A.05.00; internal
			 build PHSS_30562/DPSOL_00084, built on Wed 
			Jul 14 09:45:13 2004
	/opt/omni/lib/libob2ecdb.sl:
		HP OpenView Storage Data Protector A.05.00; internal
			 build PHSS_30562/DPSOL_00084, built on Wed 
			Jul 14 09:41:43 2004
	/opt/omni/lib/libob2ecmn.sl:
		HP OpenView Storage Data Protector A.05.00; internal
			 build PHSS_30562/DPSOL_00084, built on Wed 
			Jul 14 09:40:52 2004
	/opt/omni/lib/libob2emmdb.sl:
		HP OpenView Storage Data Protector A.05.00; internal
			 build PHSS_30562/DPSOL_00084, built on Wed 
			Jul 14 09:44:31 2004
	/opt/omni/lib/lib_rdm.sl:
		None
	/opt/omni/lib/lib_rm.sl:
		None
	/opt/omni/sbin/omnitrig:
		HP OpenView Storage Data Protector A.05.00; internal
			 build PHSS_30337/DPSOL_00075, built on Tue 
			Mar 16 05:02:43 2004
	/opt/omni/sbin/omnidbutil:
		HP OpenView Storage Data Protector A.05.00; internal
			 build PHSS_29878/DPSOL_00056, built on Thu 
			Dec  4 05:53:18 2003
	/opt/omni/sbin/omnidbcheck:
		HP OpenView Storage Data Protector A.05.00; internal
			 build PHSS_29424/DPSOL_00046, built on Fri 
			Oct 17 06:19:56 2003
	/opt/omni/sbin/omnisv:
		HP OpenView Storage Data Protector A.05.00; internal
			 build PHSS_29424/DPSOL_00046, built on Fri 
			Oct 17 06:20:22 2003
	/opt/omni/sbin/mrgcfg:
		HP OpenView Storage Data Protector A.05.00; internal
			 build PHSS_30337/DPSOL_00075, built on Thu 
			Apr 15 05:38:15 2004
	/opt/omni/sbin/utilns/get_info:
		None
	/opt/omni/lbin/bsm:
		HP OpenView Storage Data Protector A.05.00; internal
			 build PHSS_30562/DPSOL_00084, built on Wed 
			Jul 14 09:43:04 2004
	/opt/omni/lbin/crs:
		HP OpenView Storage Data Protector A.05.00; internal
			 build PHSS_30562/DPSOL_00084, built on Wed 
			Jul 14 09:44:10 2004
	/opt/omni/lbin/dbbda:
		HP OpenView Storage Data Protector A.05.00; internal
			 build PHSS_29878/DPSOL_00056, built on Thu 
			Dec  4 05:54:51 2003
	/opt/omni/lbin/dbsm:
		HP OpenView Storage Data Protector A.05.00; internal
			 build PHSS_30337/DPSOL_00075, built on Tue 
			Mar 16 05:02:12 2004
	/opt/omni/lbin/msm:
		HP OpenView Storage Data Protector A.05.00; internal
			 build PHSS_30562/DPSOL_00084, built on Wed 
			Jul 14 09:43:49 2004
	/opt/omni/lbin/mmd:
		HP OpenView Storage Data Protector A.05.00; internal
			 build PHSS_30337/DPSOL_00075, built on Tue 
			Mar 16 05:01:15 2004
	/opt/omni/lbin/rsm:
		HP OpenView Storage Data Protector A.05.00; internal
			 build PHSS_30562/DPSOL_00084, built on Wed 
			Jul 14 09:43:26 2004
	/opt/omni/newconfig/etc/opt/omni/dltemplates/lists/oracle8/
		Archive:
		None
	/opt/omni/newconfig/etc/opt/omni/dltemplates/lists/oracle8/
		Archive_Delete:
		None
	/opt/omni/newconfig/etc/opt/omni/dltemplates/lists/oracle8/
		Database_Archive:
		None
	/opt/omni/newconfig/etc/opt/omni/dltemplates/lists/oracle8/
		Database_Switch_Archive:
		None
	/opt/omni/newconfig/etc/opt/omni/dltemplates/lists/oracle8/
		Database_Switch_ArchiveDel:
		None
	/opt/omni/newconfig/etc/opt/omni/dltemplates/lists/oracle8/
		Direct_Database:
		None
	/opt/omni/newconfig/etc/opt/omni/dltemplates/lists/oracle8/
		SMB_Database:
		None
	/opt/omni/newconfig/etc/opt/omni/dltemplates/lists/oracle8/
		Whole_Online:
		None
	/opt/omni/newconfig/etc/opt/omni/dltemplates/lists/oracle8/
		Whole_Online_Delete:
		None
	/opt/omni/newconfig/etc/opt/omni/dltemplates/lists/oracle8/
		SMB_Database_Oracle8:
		None
	/opt/omni/newconfig/etc/opt/omni/options/global:
		None

cksum(1) Output:
	
	DATA-PROTECTOR.OMNI-CS,fr=A.05.00,fa=HP-UX_B.11.00_32/64,
		v=HP:
	3329753242 31220 /opt/omni/newconfig/etc/opt/omni/options/
		global
	947830113 418 /opt/omni/newconfig/etc/opt/omni/dltemplates/
		lists/oracle8/Archive
	228764566 483 /opt/omni/newconfig/etc/opt/omni/dltemplates/
		lists/oracle8/Archive_Delete
	3753438892 699 /opt/omni/newconfig/etc/opt/omni/dltemplates/
		lists/oracle8/Database_Archive
	3603796158 810 /opt/omni/newconfig/etc/opt/omni/dltemplates/
		lists/oracle8/Database_Switch_Archive
	2023304916 868 /opt/omni/newconfig/etc/opt/omni/dltemplates/
		lists/oracle8/Database_Switch_ArchiveDel
	2866186615 638 /opt/omni/newconfig/etc/opt/omni/dltemplates/
		lists/oracle8/Direct_Database
	4098661742 673 /opt/omni/newconfig/etc/opt/omni/dltemplates/
		lists/oracle8/SMB_Database
	65334027 680 /opt/omni/newconfig/etc/opt/omni/dltemplates/
		lists/oracle8/Whole_Online
	1703273148 761 /opt/omni/newconfig/etc/opt/omni/dltemplates/
		lists/oracle8/Whole_Online_Delete
	2489621434 639 /opt/omni/newconfig/etc/opt/omni/dltemplates/
		lists/oracle8/SMB_Database_Oracle8
	2284929787 1945600 /opt/omni/lbin/bsm
	2436189768 856064 /opt/omni/lbin/crs
	2703533127 786432 /opt/omni/lbin/dbbda
	3674823631 1613824 /opt/omni/lbin/dbsm
	2049674582 1105920 /opt/omni/lbin/msm
	2286275312 659456 /opt/omni/lbin/mmd
	3722243683 1490944 /opt/omni/lbin/rsm
	1815190259 593920 /opt/omni/sbin/omnitrig
	1999404107 987136 /opt/omni/sbin/omnidbutil
	4041678267 23304 /opt/omni/sbin/utilns/get_info
	1301962268 1011712 /opt/omni/sbin/omnidbcheck
	3228976616 454656 /opt/omni/sbin/omnisv
	3659033571 770048 /opt/omni/sbin/mrgcfg
	1280086914 966656 /opt/omni/lib/libob2eadm.sl
	2789219679 1032192 /opt/omni/lib/libob2ecdb.sl
	393505205 1069056 /opt/omni/lib/libob2ecmn.sl
	3220158234 823296 /opt/omni/lib/libob2emmdb.sl
	2241799558 569344 /opt/omni/lib/lib_rdm.sl
	2696292367 356848 /opt/omni/lib/lib_rm.sl
	3223693227 1722 /sbin/init.d/omni

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies:
	Some of the defect fixes contained in this patch
	depend on the following other patches or their
	successors in order to completely resolve the problem:

	PHSS_30347:
	Disk Agent (DA) packet patch,
	release date: Available
	Change Request: H555012804
	PHSS_30347 is required for this defect fix.

	PHSS_30331:
	Documentation packet patch,
	release date: Available
	Change Request: 8606331369
	PHSS_30331 is required for this defect fix.

	PHSS_30333:
	Oracle8 packet patch,
	release date: Available
	Change Request: 8606331369
	PHSS_30333 is required for this defect fix.

	PHSS_30574:
	Core packet patch,
	release date: Available
	Change Request: 8606330245
	Change Request: 8606331369
	PHSS_30574 is required for these defect fixes.
	Change Request: H555012347
	Change Request: H555008950
	Bad catalog access message is displayed without PHSS_30574.

	PHSS_30342:
	SureStore Agent (SSEA) packet patch,
	release date: Available
	Change Request: H555008887
	PHSS_30342 is required for this defect fix.

	PHSS_30332:
	SAP packet patch,
	release date: Available
	Change Request: H555008908
	PHSS_30332 is required for this defect fix.

	PHSS_30338:
	Cell Console (CC) packet patch,
	release date: Available
	Change Request: 8606331369
	Change Request: H555012347
	Change Request: H555009877
	Change Request: H555009496
	Change Request: 8606280024
	PHSS_30338 is required for these defect fixes.

	PHSS_30334:
	Media Agent (MA) packet patch,
	release date: Available
	Change Request: H555008680
	Change Request: 8606306486
	PHSS_30334 is required for these defect fixes.

Supersedes:
	PHSS_30337 PHSS_29878 PHSS_29424 PHSS_29147 PHSS_28736 PHSS_28340
	PHSS_27584

Equivalent Patches: None

Patch Package Size: 4830 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHSS_30562

	5. Run swinstall to install the patch:

		swinstall -x autoreboot=true -x patch_match_target=true \
			  -s /tmp/PHSS_30562.depot

	By default swinstall will archive the original software in 
	/var/adm/sw/save/PHSS_30562.  If you do not wish to retain a
	copy of the original software, include the patch_save_files
	option in the swinstall command above:

		-x patch_save_files=false

	WARNING: If patch_save_files is false when a patch is installed,
		 the patch cannot be deinstalled.  Please be careful
		 when using this feature.

	For future reference, the contents of the PHSS_30562.text file is 
	available in the product readme:

		swlist -l product -a readme -d @ /tmp/PHSS_30562.depot

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHSS_30562.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
	PHSS_30562:
	NOTE!
	This Patch has to be installed on the Cell Manager host.
	Data Protector server must be shutdown before installing
	the patch. Use the following command for shutting down
	the server:

	   "/opt/omni/sbin/omnisv.sh stop".

	After the installation is complete, restart Data Protector
	server using "/opt/omni/sbin/omnisv.sh start".

	
	Patch includes the following Site Specific Patches:
	   SSPUX500_007
	   SSPUX500_014
	   SSPUX500_020
	   SSPUX500_021
	   SSPUX500_027
	   SSPUX500_028
	   SSPUX500_031
	   SSPUX500_041
	   SSPUX500_047
	   SSPUX500_048

	A Site Specific Patch is a temporary hotfix that
	you might have received from HP Support if you
	have encountered a problem with Data Protector
	for which no General Release patch was or is
	available yet.

	If any newer Site Specific Patch - that is
	one with a higher number - for the Cell Manager
	is installed on your system, then you
	must re-apply this SSP after installing
	this Cell Manager patch.