Patch Name: PHNE_25502 Patch Description: s700_800 11.00 ATM PCI, HSC and HP-PB cumulative patch Creation Date: 02/02/14 Post Date: 02/02/21 Hardware Platforms - OS Releases: s700: 11.00 s800: 11.00 Products: J2805BA: E.11.00.00 J2805BA: F.11.00.00 J2805BA: G.11.00.00 J2805BA: H.11.00.00 J2805BA: I.11.00.00 J2805BA: I.11.00.10 J2806CA: E.11.00.00 J2806CA: F.11.00.00 J2806CA: G.11.00.00 J2806CA: H.11.00.00 J2806CA: I.11.00.00 J2806CA: I.11.00.10 J3572AA: E.11.00.00 J3572AA: F.11.00.00 J3572AA: G.11.00.00 J3572AA: H.11.00.00 J3572AA: I.11.00.00 J3572AA: I.11.00.10 J3572BA: I.11.00.00 J3572BA: I.11.00.10 A5483A: I.11.00.10 A5513A: I.11.00.10 A5515A: I.11.00.10 J2468A: I.11.00.10 J2469A: I.11.00.10 J2499A: I.11.00.10 J2804A: I.11.00.10 J3420B: I.11.00.10 J3557A: I.11.00.10 J3573A: I.11.00.10 Filesets: ATMHSC.ATMHSC-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_32,v=HP ATMHSC.ATMHSC-KRN,fr=F.11.00.00,fa=HP-UX_B.11.00_32,v=HP ATMHSC.ATMHSC-KRN,fr=G.11.00.00,fa=HP-UX_B.11.00_32,v=HP ATMHSC.ATMHSC-KRN,fr=H.11.00.00,fa=HP-UX_B.11.00_32,v=HP ATMHSC.ATMHSC-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_32,v=HP ATMHSC.ATMHSC-KRN,fr=I.11.00.10,fa=HP-UX_B.11.00_32,v=HP ATMHSC.ATMHSC-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_64,v=HP ATMHSC.ATMHSC-KRN,fr=F.11.00.00,fa=HP-UX_B.11.00_64,v=HP ATMHSC.ATMHSC-KRN,fr=G.11.00.00,fa=HP-UX_B.11.00_64,v=HP ATMHSC.ATMHSC-KRN,fr=H.11.00.00,fa=HP-UX_B.11.00_64,v=HP ATMHSC.ATMHSC-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_64,v=HP ATMHSC.ATMHSC-KRN,fr=I.11.00.10,fa=HP-UX_B.11.00_64,v=HP ATM2HSC.ATM2HSC-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_32,v=HP ATM2HSC.ATM2HSC-KRN,fr=F.11.00.00,fa=HP-UX_B.11.00_32,v=HP ATM2HSC.ATM2HSC-KRN,fr=G.11.00.00,fa=HP-UX_B.11.00_32,v=HP ATM2HSC.ATM2HSC-KRN,fr=H.11.00.00,fa=HP-UX_B.11.00_32,v=HP ATM2HSC.ATM2HSC-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_32,v=HP ATM2HSC.ATM2HSC-KRN,fr=I.11.00.10,fa=HP-UX_B.11.00_32,v=HP ATM2HSC.ATM2HSC-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_64,v=HP ATM2HSC.ATM2HSC-KRN,fr=F.11.00.00,fa=HP-UX_B.11.00_64,v=HP ATM2HSC.ATM2HSC-KRN,fr=G.11.00.00,fa=HP-UX_B.11.00_64,v=HP ATM2HSC.ATM2HSC-KRN,fr=H.11.00.00,fa=HP-UX_B.11.00_64,v=HP ATM2HSC.ATM2HSC-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_64,v=HP ATM2HSC.ATM2HSC-KRN,fr=I.11.00.10,fa=HP-UX_B.11.00_64,v=HP ATM2HSC.ATM2HSC-RUN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATM2HSC.ATM2HSC-RUN,fr=F.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATM2HSC.ATM2HSC-RUN,fr=G.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATM2HSC.ATM2HSC-RUN,fr=H.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATM2HSC.ATM2HSC-RUN,fr=I.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATM2HSC.ATM2HSC-RUN,fr=I.11.00.10,fa=HP-UX_B.11.00_32/64,v=HP ATMPB.ATMPB-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_32,v=HP ATMPB.ATMPB-KRN,fr=F.11.00.00,fa=HP-UX_B.11.00_32,v=HP ATMPB.ATMPB-KRN,fr=G.11.00.00,fa=HP-UX_B.11.00_32,v=HP ATMPB.ATMPB-KRN,fr=H.11.00.00,fa=HP-UX_B.11.00_32,v=HP ATMPB.ATMPB-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_32,v=HP ATMPB.ATMPB-KRN,fr=I.11.00.10,fa=HP-UX_B.11.00_32,v=HP ATMPCI.ATMPCI-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_64,v=HP ATMPCI.ATMPCI-KRN,fr=F.11.00.00,fa=HP-UX_B.11.00_64,v=HP ATMPCI.ATMPCI-KRN,fr=G.11.00.00,fa=HP-UX_B.11.00_64,v=HP ATMPCI.ATMPCI-KRN,fr=H.11.00.00,fa=HP-UX_B.11.00_64,v=HP ATMPCI.ATMPCI-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_64,v=HP ATMPCI.ATMPCI-KRN,fr=I.11.00.10,fa=HP-UX_B.11.00_64,v=HP ATM2PCI.ATM2PCI-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_32,v=HP ATM2PCI.ATM2PCI-KRN,fr=I.11.00.10,fa=HP-UX_B.11.00_32,v=HP ATM2PCI.ATM2PCI-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_64,v=HP ATM2PCI.ATM2PCI-KRN,fr=I.11.00.10,fa=HP-UX_B.11.00_64,v=HP ATMCORE.ATMCORE-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_32,v=HP ATMCORE.ATMCORE-KRN,fr=F.11.00.00,fa=HP-UX_B.11.00_32,v=HP ATMCORE.ATMCORE-KRN,fr=G.11.00.00,fa=HP-UX_B.11.00_32,v=HP ATMCORE.ATMCORE-KRN,fr=H.11.00.00,fa=HP-UX_B.11.00_32,v=HP ATMCORE.ATMCORE-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_32,v=HP ATMCORE.ATMCORE-KRN,fr=I.11.00.10,fa=HP-UX_B.11.00_32,v=HP ATMCORE.ATMCORE-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_64,v=HP ATMCORE.ATMCORE-KRN,fr=F.11.00.00,fa=HP-UX_B.11.00_64,v=HP ATMCORE.ATMCORE-KRN,fr=G.11.00.00,fa=HP-UX_B.11.00_64,v=HP ATMCORE.ATMCORE-KRN,fr=H.11.00.00,fa=HP-UX_B.11.00_64,v=HP ATMCORE.ATMCORE-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_64,v=HP ATMCORE.ATMCORE-KRN,fr=I.11.00.10,fa=HP-UX_B.11.00_64,v=HP ATMCORE.ATMCORE-RUN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMCORE.ATMCORE-RUN,fr=F.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMCORE.ATMCORE-RUN,fr=G.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMCORE.ATMCORE-RUN,fr=H.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMCORE.ATMCORE-RUN,fr=I.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMCORE.ATMCORE-RUN,fr=I.11.00.10,fa=HP-UX_B.11.00_32/64,v=HP ATMCORE.ATMCORE-MAN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMCORE.ATMCORE-MAN,fr=F.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMCORE.ATMCORE-MAN,fr=G.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMCORE.ATMCORE-MAN,fr=H.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMCORE.ATMCORE-MAN,fr=I.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMCORE.ATMCORE-MAN,fr=I.11.00.10,fa=HP-UX_B.11.00_32/64,v=HP ATMCORE.ATMCORE-SNMP,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMCORE.ATMCORE-SNMP,fr=F.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMCORE.ATMCORE-SNMP,fr=G.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMCORE.ATMCORE-SNMP,fr=H.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMCORE.ATMCORE-SNMP,fr=I.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMCORE.ATMCORE-SNMP,fr=I.11.00.10,fa=HP-UX_B.11.00_32/64,v=HP ATMHA.ATMHA-RUN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMHA.ATMHA-RUN,fr=F.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMHA.ATMHA-RUN,fr=G.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMHA.ATMHA-RUN,fr=H.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMHA.ATMHA-RUN,fr=I.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMHA.ATMHA-RUN,fr=I.11.00.10,fa=HP-UX_B.11.00_32/64,v=HP ATMHA.ATMHA-MAN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMHA.ATMHA-MAN,fr=F.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMHA.ATMHA-MAN,fr=G.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMHA.ATMHA-MAN,fr=H.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMHA.ATMHA-MAN,fr=I.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMHA.ATMHA-MAN,fr=I.11.00.10,fa=HP-UX_B.11.00_32/64,v=HP ATMSAM.ATMSAM-RUN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMSAM.ATMSAM-RUN,fr=F.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMSAM.ATMSAM-RUN,fr=G.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMSAM.ATMSAM-RUN,fr=H.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMSAM.ATMSAM-RUN,fr=I.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMSAM.ATMSAM-RUN,fr=I.11.00.10,fa=HP-UX_B.11.00_32/64,v=HP ATMSAM.ATMSAM-HELP,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMSAM.ATMSAM-HELP,fr=F.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMSAM.ATMSAM-HELP,fr=G.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMSAM.ATMSAM-HELP,fr=H.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMSAM.ATMSAM-HELP,fr=I.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP ATMSAM.ATMSAM-HELP,fr=I.11.00.10,fa=HP-UX_B.11.00_32/64,v=HP Automatic Reboot?: Yes Status: General Release Critical: Yes PHNE_25502: PANIC The system may panic PHNE_22033: PANIC The system may panic PHNE_21424: PANIC The system may panic PHNE_18444: PANIC The system may panic PHNE_17270: PANIC The system may panic PHNE_14470: OTHER The shared interrupt mechanism do not work for HSC cards PHNE_13827: OTHER The atm nic on V class is damaged when updating the mac address. PHNE_13613: PANIC The system may panic PHNE_13379: PANIC The system may panic Category Tags: defect_repair general_release critical panic Path Name: /hp-ux_patches/s700_800/11.X/PHNE_25502 Symptoms: PHNE_25502: - Script error while updating from 11.0 to OEUR-0601. - The EPtRf field in atm address has not been described in the atmmgr manpage. - Traffic descriptors not taken into account for LanEmul Token-Ring. - A5513A card is sometimes not claimed on reboot, on a V2200 system. - The hardware revision of a PCI ATM card is not stored in the ift structure. - "atmconfig show -n" on a non-existent CIP interface causes system to panic. - Data page fault in function LVC_F0_remove. - panic in LDI_F_set_fastpath/bcopy while processing a badly formatted DLPI msg. - When Token ring is configured for multicast on LANE v1, it does not work. - Data page fault in asAsdRstInd (11.0 vmtrace on) - Data page fault in function IAM_F0_lrput. - ATM A5513A ATM_err_1304: VPI/VCI range is invalid. - Lost of ILMI connectivity may be experienced during heavy network and/or NFS traffic over ATM. PHNE_22033: - Can not initialize link with Lucent M770 switch - System panic during boot in alx_complete_conreq - System panics during boot from /sbin/rc2.d/S310atm in getmsg_subr, with message: panic Buffer Overrun. - ifOperStatus (for "Operational Status") and ifAdminStatus (for "Administrative status") are inconsistent for CIP interface. - hatmon prevents ATM package to start as monitored resource while reboot with mc/service cluster. - rstatd hangs on systems that have ATM installed. - After moving a remote LEC from one ATM switch to another ATM switch hp9000 can't ping anymore the remote system. PHNE_21424: - channel error in driver atm2pci panics experienced on V-class servers. - Interoperability problems caused by LANE eavesdropping. - Cannot join Elan services if the LAN type is not specified during the configuration phase. - ATM subsystem start-up failure if no ATM card installed. - Static routes over ATM elan interface fail with error: network unreachable. - High error rate reported by Glance for ELAN interfaces. - Cannot do Token Ring source routing if LECS does not provide Segment ID in the LE_CONFIGURE_RESPONSE. - MAC LEARP entries not deleted or updated. - A patch can be installed on a subsequent release. - HPMC panic when resetting the ATM 622 card. - Data page fault in alx_read_resume when atminit and atmstop are called in a continuous loop. - Data memory protection panic in function LDI_F_data_ind while doing traffic on Token ring Elan. - Unable to recover a normal traffic on a HA configuration with an elan interface with several ip addresses. The problem occurs when primary elan comes up after both the primary and backup interfaces have been down. PHNE_18444: - data page fault panic in function cmPrcTmr. - data page fault panic in function amUsrM02S01. - data page fault panic in function amGenRelInd. - Cannot start Elan interface configured on an ATM card with a PPA >= 16. - Unable to join Elan services with some connections from Elan services (LES or BUS) blocked in "Go Up" state. - ATM initialization takes long time (up to 10mn) if DNS should be reached through ATM. - Unable to establish ABR SVCs. - With ATM cards A5483A or A5513A, if a large number of SVCs is opened (> 500) and there is heavy traffic, release of some SVCs may not be completed if lots of SVCs are released simultanously. - Unable to configure with SAM, Elan interface for Elan with an Elan name including character "|". PHNE_17270: - Unable to define two packages on the same elan for High Availability (HA) configurations. - Need to lunch manually the monitor daemon to restore HA on a system. - swverify -v returns errors. - data page fault panic in function cmHashListFind. - data page fault panic in function ecDelMacArp. - data page fault panic in function LCS_F_staind_msap. - Interoperability problems with FORE's DLE services. - Unable to use IP multicast over ATM links. - Unable to get LECS address from network. - Bad performances over large ELAN especially when using openview. - Unable to get back primary LEC interface up when the LECS address is got from network especially in HA configuration. - Problem to traffic over an elan interface after it has been switched from token-ring to Ethernet. - ATM not operational on card with higher card instance Id number. - Unable to configure or modify ATM configuration on a system with short filename (filename limited to 14 characters) setup. - Performance or data transmission problems with ATM cards J2499A, J2469A and J2468A with the following nettl WARNING logging: [ALXHDM] Aal5 prot encoutered on cid ... Resolution: - Added EMS support for High Availability especially to be able to define two packages on the same elan. - Added EMS support for High Availability especially to not have to launch manually the monitor daemon to recover HA functionnality over ATM. - Update ATM subsystem definition file /usr/sam/lib/kc/subsys.ATM.tx properly. - wait until carrier is stable before notifying to ATM stack change in operational status. - Handle memory allocation failure properly to avoid panic. - Handle memory allocation failure properly to avoid panic - No longer restrict calling ATM address to unicast. - Change LEC implementation to be able to enable reception of multicast packets. - Optimize handling of LE_ARP entry timers to consume less cpu on the expense of data transfer. - Change ILMI to not block LEC in the process of joining elan services. - clean up ELAN interface structures after switching from token-ring to ethernet. - No longer discard packets with CPCS-UU or CPI not set to 0 in the AAL-5 trailer. PHNE_14470: - Shared interrupt problem fixed for HSC ATM card - Support of Token Ring Lan Emulation Client - Support of UNI 4.0 - Support of short name file system - Kernel stack overflow problem in signaling fixed - High-Availability switching problem when the primary interface is down - Potential problem for atm diags fixed - potential data corruption fixed - Routing problem through CIP interface fixed - problem in ATMHA installation fixed - Cleaning in Lan Emulation Client code about LeArp response management - Panic during logging in the signaling mux fixed PHNE_13827: - J3572AA only (ATM for V class systems) : if the mac is modified in the atm nic (J3557A), the atm nic no more works and must be replaced. PHNE_13613: - when 16 ATM nics installed, no lec operationnal - classical IP packets were sometimes dropped - unused CIP svcs dynamically created - LEC to LEC incoming connections management improved - if different elan name is returned from the les the lec may be not able to join the elan - system hang or panic caused by resources exhaustion - support of 4096 VCs on 622 Mb cards - panic during boot on systems having lots of I/O cards PHNE_13379: - System panics when running atminit on an active adapter - System panics when creating CBR VCs - System panics under intensive inbound trafic - FTP and RCP wedge for a while (> 10 mn) - Lan Emulation does not work over 16 adapters - Default UBR parameters do not use full ATM bandwidth - UBR / CBR mismatch in "atmmgr show -t" Defect Description: PHNE_25502: - JAGad56235: Script error while updating from 11.0 to OEUR-0601. In updating from 11.00 to B.11.11 OEUR-0601 ic4 the following error was discovered: [20255] Running "preinstall" script for fileset "ATMCORE.ATMCORE-KRN". ps: couldn't get console device alias ps: not enough memory for hash table syncer: a syncer process already exists. - JAGab15263: The EPtRf field in atm address has not been described in the atmmgr manpage. Information about the endpoint reference identifier (EPtRf) field, associated with a point-to-multipoint connection on the leaf side in atmmgr command output has not been provided in the 'atmmgr' manpage. - JAGaa03115: Traffic descriptors not taken into account for LanEmul Token-Ring. When some traffic descritors are created to traffic in Token-Ring ELANs, atmconfig command gives no error but they are never taken into account for traffic between ATM token ring ELAN and Token ring network or between two ATM NICs on the Token Ring Elan. - JAGad53408: A5513A card is sometimes not claimed on reboot, on a V2200 system, due to read of the PCI Vendor ID register returning 0xFFFFFFFF. - JAGad65160: The hardware revision of a PCI ATM card needs to be found out without pulling the card out. - JAGad90063: "atmconfig show -n" on a non-existent CIP interface causes system to panic. "atmconfig show -n" causes the system to panic if the CIP interface specified correspond to an ATM NIC that does not exist. - JAGad53657: Data page fault in function LVC_F0_remove. LVC_F0_remove could not handle a case where the given LVC_ctx pointer is not in the list and it caused a data page fault triggering a panic. - JAGad78323: panic in LDI_F_set_fastpath/bcopy while processing a badly formatted DLPI msg. When a bad DL_IOC_HDR_INFO packet is sent from the higher layer (say IP) to the ATM ELAN interface, the system panics. - JAGaa45769 :When Token ring is configured for multicast on LANE v1, it does not work. Token ring configuration for multicast is not supported on LANE v1. - JAGab83144: Data page fault in asAsdRstInd (11.0 vmtrace on). During processing of ERROR RECOVERY pdu, asAsdRstInd is called with dlc as parameter but dlc is already freed resulting in the data page fault. - JAGad26995: Data page fault in function IAM_F0_lrput. CIP crashes when processing a message received on one lower read queue because the stream context pointed to by q_ptr has been deallocated. - JAGad71898: ATM A5513A ATM_err_1304: VPI/VCI range is invalid. When replacing obsoleted J3557A ATM card with the new card (A5513A), the system failed to initialise the card, and give the following error : "ATM_err_1304: VPI/VCI range is invalid" - JAGad17083,JAGad77776: Lost of ILMI connectivity may be experienced during heavy network and/or NFS traffic over ATM. On some heavy loaded systems, ILMI is unable to maintain its keep alive mechanism because it is blocked in some system calls especially stat and it is not running in real time priority. Resolution: - JAGad56235: Removed syncer daemon restart from preinstall and preremove scripts of patches. - JAGab15263: The atmmgr manpage has been updated to reflect the information about the EPtRF field. - JAGaa03115: DLSAP-traffic descriptor is modified such that the right traffic descriptor is picked up for Token Ring ELANs. - JAGad53408: The attach routine has been modified to claim the card, even if the read of the Vendor ID register returns 0xFFFFFFFF. - JAGad65160: Code is changed such that the hardware revision of PCI ATM cards is stored in the ift structure. - JAGad90063: CIP module is changed such that the PPA is tested to be valid before any MIB operation. - JAGad53657: LVC_F0_remove() code is fixed such that it is able to process properly, even if the given LVC_ctx pointer is not in the list and not cause a panic. - JAGad78323: Appropriate checks has been added to validate the the DL_IOC_HDR_INFO packet before processing the request. - JAGaa45769: The multicast macAddr configuration has been modified based on lanType (802.3/802.5) in LANEv1 code. - JAGab83144: After returning from the SSCOP state machine, dlc is checked such that functions such as asAsdRstInd() will not be called if the dlc is already freed. - JAGad26995: The stream server resets the q_ptr field of both read and write queues when unlinking a stream. - JAGad71898: atminit is modified to read the VPI/VCI bits from the card if an attempt to set the bits fails with EINVAL and retry setting the bits with the read VPI/VCI bits. A warning is printed on stderr to change the configuration through SAM. - JAGad17083,JAGad77776: ILMI now reads the configuration file /etc/atm/ilmid.debug.conf at startup and when SIGHUP is received to see if debug is enabled. PHNE_22033: - JAGad04560: Can not initialize link with Lucent M770 switch MAC address data sent by ILMI is expressed in ASCII rather than HEX. - JAGad21318: System panic during boot in alx_complete_conreq The various error paths in alx_complete_conreq grabs the OPEN_LIST lock before releasing the IFT lock. Since they have both the same order, the kernel panics. - JAGad14719: System panics during boot from /sbin/rc2.d/S310atm in getmsg_subr, with message: panic Buffer Overrun. The driver is reusing the memory block (mblk) carrying a DL_BIND_REQ to reply with a DL_BIND_ACK which does not fit in the buffer. - JAGac79031: ifOperStatus (for "Operational Status") and ifAdminStatus (for "Administrative status") are inconsistent for CIP interface. ifOperStatus and ifAdminStatus objects were not updated properly. - JAGac42555: The MC/SG cluster is configured to automaticaly start with its associated package(s) at system boot up. When the system is rebooted the cluster starts successfully, however the SAP package fails to start , as the associated ATM resource can't be monitored when LANG is not set to "C". - JAGad07300: rstatd hangs on systems that have ATM installed. Control message sent by the rstatd was discarded by the the driver on /dev/atm device. That is why rstatd was blocked in getmsg call. - JAGab77735: After moving a remote LEC from one ATM switch to another ATM switch, the hp9000 can't ping anymore the remote system. This is because its ATM address is not refreshed in the local hp9000 LEC elarp table. According to ATM Forum LANE specifications, the entry should be deleted after the aging timer expired. Resolution: - JAGad04560: Function which encodes the MAC address into the ILMI reply has been corrected. Now ILMI sends 6 binary octets instead of 12 ASCII. - JAGad21318: The IFT lock is released in the error paths of alx_complete_conreq before grabing the OPEN_LIST lock. - JAGad14719: The incoming buffer containing DL_BIND_REQ is freed and a new mblk is allocated to return DL_BIND_ACK. - JAGac79031: Now for CIP, both ifAdminStatus and ifOperStatus are being updated properly. - JAGac42555: This was caused by the mesg witten by atm commands to routed by EMS. The mesg is now written to standard error instead of standard out. - JAGad07300: Now, driver sends a DL_ERROR_ACK (DL_BADPRIM) when receiving an unknown control message namely M_PROTO and M_PCPROTO. - JAGab77735: The new code now passes the right parameters to function that starts LE_ARP aging timer PHNE_21424: - JAGac57113: channel error in driver atm2pci panic on V-class servers. On V-class, driver and card communicate through shared memory managed by the EPIC. If two processors write to the same shared memory location, the order the writes are actually executed is not guaranteed. To guarantee the order a read should be performed between the writes to flush pending reads. In some corner cases, required reads were missing. This leads to channel errors. - JAGab69572: interoperability problems caused by LANE eavesdropping. Some proprietary extensions of LANE do not interoperate with LANE emulation eavesdropping. HP implementation was not providing any support to disable eavesdropping. - JAGab77832: Cannot join LANE services if the LAN type is not specified during the configuration phase. In a few configurations, LANE services may require the LEC to explicitely specify the LAN type to either 802.3/Ethernet or 802.5. HP implementation was not providing users the capacity to configure the LAN type. - JAGab63567: ATM subsystem start-up failure when no ATM card installed. This problem is caused by the fact that the start-up script started some ATM daemons but ATM driver does not let them access some devices if no ATM card is installed. - 5003429381: Static routes over ATM elan interface fail with error: network unreachable. This is caused by the fact that some parameters needed to initialize the interface for IP, should be retrieved from the ELAN services. This may not be completed before the start-up script which add static routes is executed. In this case IP is not aware of the interface. Hence the error network unreachable. - 1653310185, JAGab64432: High error rate reported by Glance for Elan Interfaces. The MIB-II counter ifInErrors was incremented each time a packet was received is a SAP that is not bound with IP. This is case for instance when edge device forward packets broadcasted on SAP 0xFF, or for backup interface on a HA configuration. - 1653308841, JAGab64430: Cannot do Token Ring source routing if LECS does not provide Segment ID in the LE_CONFIGURE_RESPONSE. The LEC stack was not retrieving the Segment from the packet to be able to do source routing. - JAGab77735: MAC LEARP entries not deleted or updated. The problem was caused by incorrect implementation of functions which manage MAC entries. In one case the function which starts aging timer was called with a bad parameter. This was resulting to the timer not being started. - 5003453373, JAGab64953: a patch can be installed on a subsequent release. The product releases the patch applies to where documented but this was not enforced. - JAGab73825: HPMC panic when resetting ATM 622 card. The ATM card continued to do the DMA even after reset of card was received. - JAGad02216: data page fault in alx_read-resume when atmnit and atmstop are called in a continuous loop. The data page fault occurs when alx_read_resume tries to access locks which were already released and freed. access locks which were already released and freed. - JAGad01352: Data memory protection panic in function LDI_F_data_ind while doing traffic on Token ring Elan. The RIF length in the source routed packet is odd. The RIF length is used as an offset to calculate a new address. The odd length causes our software to try to access an unsigned short integer on an odd boundary. - JAGad03364: Unable to recover traffic on an HA configuration. This problem is caused by an inconsistency between the behavior of the ATM HA monitor daemon(hatmmon), and IP behavior when several IP addresses are configured over interface. When both the primary and secondary interfaces go down, hatmmon switches the IP addresses over the primary interface. At this time IP requests information (mac address, mtu size, lan type,...) about the interface. As the primary elan interface is down at this time, a null mac address is returned. Later when the primary interface comes up, an ifconfig is performed but IP does not request the parameter and continue to associate a null mac address to the interface. Any traffic with this null mac address is then dropped by the corresponding LEC. Resolution: - JAGac57113: reads have been added to guarantee order of writes in the shared memory wherever it is necessary. - JAGab69572: LANE eavesdropping can now be disabled if the following is set in the ATM configuration file /etc/rc.config.d/atmconf: ATM_ELAN_NOEAVESDROP=1, before the ATM subsystem is initialized. - JAGab77832: the LAN type can now be specified in the LEC interface configuration file by setting either HP_ATM_ELAN_TYPE=802.3 for 802.3/ethernet HP_ATM_ELAN_TYPE=802.5 for token ring. - JAGab63567: Start-up script has ben changed to check if at least one ATM card is installed before proceeding to card dependant initialization. - 5003429381: Start-up script has been changed to be able to use a configurable parameter to synchronize initialization of Elan interfaces. - 1653310185, JAGab64432: MIB II counter ifInErrors is no longer incremented if a packet is received with a SAP that is not bound with IP. - 1653308841, JAGab64430: The Segment ID is now retrieved from the packets if it is not provided in LE_CONFIGURED_RESPONSE. - JAGab77735: The function which starts aging timer is now called with the right parameter. - 5003453373, JAGab64953: Now when a patch is installed, the version of the product is checked. - JAGab73825: The ATM driver now disables interrupts and disables DMA before resetting the card. - JAGad02116: The ATM driver code now checks the state of VC before attempting to access the lock. - JAGad01352: The standard allows us to drop a packet if the RIF length is odd. Now, the packet is dropped if RIF length is odd. - JAGad03364: hatmmon has been modified to switch over IP addresses only when the interface is UP. PHNE_18444: - 5003463679 (JAGaa95697): data page fault panic in function cmPrcTmr. panic+0x14 report_trap_or_int_and_panic+0x80 trap+0xda8 nokgdb+0x8 cmPrcTmr+0x254 ecActvTmr+0x68 LMG_F_actv_timer+0x5c LEC_F0_ursrv+0x38 sq_wrapper+0x94 str_sched_mp_daemon+0x178 str_sched_daemon+0x290 main+0x5bc $vstart+0x48 istackatbase+0x84 The panic is due to fact that in function cmPrcTmr, a local variable was to used store the pointer to the next timer structure to be processed. That did not take into account the fact that procesing of current timer could lead to free next timer structure. That may result to data page in cmPrcTmr function or a data corruption if th memory bucket is allocated to another structure. -JAGaa52732 : data page fault in function amUsrM02S01 amUsrM02S01+0xb8 amActvConTbl+0x50 AmLiAsdDatInd+0x20e4 AsUiAsdDatInd+0x48 asV3xAa4Sx_y+0x3c asV30AaDatInd+0x50 asV30ProcessSdPdu+0x90 asV30Pdu8S4+0x14 AsLiAalDatInd+0x154 SAA_F0_a_dl_data_ind+0x48 SAA_F_handler+0x36c SIG_F0_lrdata+0x38 SIG_F0_lrput+0xf8 putnext+0x84 CAM_F0_sp_dataind+0x70 streams_put+0x98 CAM_F_data_ind+0x354 fpci_receive_it+0x1500 fpci_isr+0x348 epic_isr+0x58 mp_ext_interrupt+0x1b0 ivti_patch_to_nop3+0x0 idle+0x254 swidle_exit+0x0 The root cause is the data corruption of signaling control block structure caused by the problem reference to Service Request:5003463679. - JAGaa62690: data page fault in function amGenRelInd amGenRelInd+0x118 amProcessRstReq+0x520 AmUiAmtRstReq+0x258 SSV_F0_generate_restart+0xb0 SSV_F_handler+0xb68 SMG_F_call_services_handler+0x90 SAA_F_dlc_staind+0x144 PtMiLasStaInd+0x94 AsMiLasStaInd+0x4c asLasStaInd+0xbc asAsdConCfm+0x58 asV31Aa1S2_2+0x28 asV31AaEstCfm+0x44 asV31ConCS2+0xa8 asV31Pdu1S2+0x7c AsLiAalDatInd+0x154 SAA_F0_a_dl_data_ind+0x48 SAA_F_handler+0x36c SIG_F0_lrdata+0x38 SIG_F0_lrput+0xf8 putnext+0x80 CAM_F0_sp_dataind+0x70 streams_put+0x90 CAM_F_data_ind+0x354 fpci_receive_it+0x1500 fpci_isr+0x348 epic_isr+0x54 mp_ext_interrupt+0x144 ivti_patch_to_nop3+0x0 idle+0x1c4 swidle_exit+0x0 The root cause is the data corruption of signaling control block structure caused by the problem reference to Service Request:5003463679. - JAGab15218: Cannot start Elan Interface configured on ATM card with PPA >= 16. The card PPA is coded on both LEC unit and LEC index The mask used to extract card PPA from LEC enabled only 4 bits, truncating PPA >=16. In this case there was an inconsistence between the value extracted from LEC unit the value extracted from LEC index. That lead to the rejection of the initialization request. - JAGab92756:Unable to join Elan services with some connections from Elan services (LES or BUS) blocked in "Go Up" state. When the Elan service requests a connection with the LEC, the request is routed to an entity that sends an IOCTL to get the vci,vpi. The implementation of the entity was discarding any negative acknowledgement to the IOCTL. That blocked the entity so that it was no longer able to process further requests. - 5003458067: ATM initialization takes long time (up to 10mn) if DNS should be reached through ATM. This is due to the fact that initialization code of ATM was calling DNS functions to validate local IP addresses. DNS was not yet reachable as ATM was not ready. The delay was due to DNS function timeout. - JAGaa94097: Unable to establish ABR SVCs. The ATM stack was checking that ABR Initial Cell Rate negotiated during the SVC establishement was greater than the Minimum Cell Rate. This is not required by standards. - JAGaa79911: With ATM cards A5483A or A5513A, if a large number of SVCs is opened (> 500) and there is heavy traffic, release of some SVCs may not be completed if lots of SVCs are released simultanously. Due to limitation of some critical ressources shared by card and the host, some requests to the cards (data transfer, VC release) may be queued and processed later when resources are available. In an MP environment the synchronization of the access to these queues was not properly handled. That was leading in some cases to the corruption of some queue headers leaving out chunck of release requests. -5003359836 (JAGaa02990): Unable to configure with SAM, Elan interface for Elan with an Elan name including character "|". The character "|" was being interpreted by SAM as a pipe command. Resolution: - 5003463679 (JAGaa95697):Change LEC and Signalling timer implementation to avoid access to timer structures already freed. - JAGaa52732: Change LEC and Signalling timer implementation to avoid access to timer structures already freed. - JAGaa62690: Change LEC and Signalling timer implementation to avoid access to timer structures already freed. - JAGab15218: Set the proper mask to extract correctly the PPA from the LEC index. - JAGab92756: Handle internal error that was leading to the hang of entities that accepts connection from Elan services. - 5003-458067: No longer call DNS functions to validate local IP addresses. - JAGaa94097: Remove checking that the negotiated Initial Cell Rate is greater than the Minimum Cell Rate. - JAGaa79911: Change synchronization of queue of requests to take into account all concurrent accesses in MP environment. - 5003359836 (JAGaa02990) Change SAM to no longer interprete "|" as pipe command. PHNE_17270: - 5003388405: Unable to define two packages over the same Elan for a HA configuration. -1653272641 and 1653270694 : Need to manually lunch the monitor daemon to restore HA on a system where the the primary and the secondary ATM card fail. After ATM cards are up again, the administrator have to MANUALLY launch the monitor daemon (serv_hatmmon) to restore HA over ATM. - 5003423764: swverify returns errors: ERROR: File "/usr/sam/lib/kc/subsys.ATM.tx" should have mode "444" but the actual mode is "644". ERROR: File "/usr/sam/lib/kc/subsys.ATM.tx" had a different mtime than expected. ERROR: File "/usr/sam/lib/kc/subsys.ATM.tx" should have size "632" bytes but the actual size is "0" bytes. The cause of the swverify problem is that the patch configure script resets the Kernel Configuration files to empty. The cause of the SAM file becoming empty is that the configure script is not observing the complete list of ATM SAM revision numbers correctly. - 5003431551: mib-II counters ifInOctect and IfOutOctects are not updated. Some mib-II objects where not updated by the LEC. - 5003423194: data page fault panic in function cmHashListFind panic+0x10 report_trap_or_int_and_panic+0xe8 trap+0xa48 $call_trap+0x20 cmHashListFind+0xd4 ecAllocSuInstId+0x68 ecElanConReq+0x64 ecELE0S0+0xe4 EcMiLecCntrlReq+0x1e4 LCS_F_ctrl_msap+0x5c ELA_F0_config+0x80 ELA_F0_starting+0x6c ELA_F_handler+0x580 LVC_F0_a_srv_trap_port+0x7c LVC_F_handler+0x1038 LEC_F0_lrproto+0x174 LEC_F0_lrput+0x9c putnext+0x74 DLS_F_sp_send+0x5c streams_put+0xe0 TRP_F0_trapctx_send+0x1f4 TRP_F_traplist_send+0x58 NIC_F0_a_settingup_isup+0x24 NIC_F_handler+0x98 NIC_F0_sp_ifstate+0x124 MON_F_enqueue_mblk+0x94 CAM_F_wput+0x600 putnext+0x74 SIG_F0_lwsrv+0x44 sq_wrapper+0xb8 str_sched_mp_daemon+0x284 str_sched_daemon+0x1f4 main+0x944 $vstart+0x34 $locore+0x74 main+0x944 $vstart+0x34 $locore+0x74 This problem occurs when the customer reboots the switch because when such operation is performed the carrier state change several hundred thousands times in 2 or 3 seconds and the physical driver in J2805. - 5003401950: Interoperability problems with FORE's DLE. Fore DLE services uses anycast address to join LES. ATM Stack was only supporting unicast address for UNI 3.0 and UNI 3.1. - 1653282145: Bad performances over large ELAN This happens when HP system traffics with a lot End systems especially when using openview. The LE_ARP table contains a lot of entries. The processing of timers associated to these timers consume a lot cpu on the expense of data transfer. - 5003447136: Problem to get back primary LEC interface up when LECS address is got from network. This occurs especially when using cisco dual homing configuration for HA. The cause is a synchronization problem between ILMI and LEC that prevent LEC from trying to join the ELAN services. - 5003447029: data page fault panic in function ecDelMacArp panic+0x3c report_trap_or_int_and_panic+0xe8 trap+0x1058 $call_trap+0x20 ecDelMacArp+0x24 ecRelOldMacArp+0x80 EcUiEcmDatReq+0x504 LIF_F_send_msg+0xc4 csq_turnover+0x8c str_sched_up_daemon+0x1b8 str_sched_daemon+0xf4 main+0x94c $vstart+0x34 $locore+0x74 The panic is due to the fact that a memory allocation was not handled properly. - 5003447011: data page fault panic in function LCS_F_staind_msap report_trap_or_int_and_panic+0xe8 interrupt+0x458 $ihndlr_rtn LCS_F_staind_msap+0x178 PtMiLecStaInd+0x1c EcMiLecStaInd+0x24 ecGenReport+0xa8 ecMAE0S1+0x330 ecELE18Sa+0x1d4 ecElanDatInd+0x260 EcLiAalDatInd+0x2c0 LVC_F_handler+0x3fc LEC_F0_lrput+0xe4 putnext+0x74 CAM_F0_sp_dataind_mp+0x94 streams_put+0xe0 CAM_F_data_ind+0x2e4 atmgsc_recv+0xe5c The panic is due to the fact that a memory allocation was not handled properly. - JAGaa46673: Problem to traffic over an elan interface after it was switched from token-ring to Ethernet. This occurs if an elan interface previously configured for a token-ring elan is modified to join an ethernet elan. The interface keep sending tokeng-ring packet format. - JAGaa51478: Data page fault panic in function cmRmvCbTq. report_trap_or_int_and_panic+0xe8 interrupt+0x458 $ihndlr_rtn+0x0 cmRmvCbTq+0x58 amStopNtcTmr+0x78 AmLiAsdConCfm+0x4fc AsUiAsdConCfm+0x3c asAsdConCfm+0x40 asV31Aa1S2_2+0x24 asV31AaEstCfm+0x44 asV31ConCS2+0x90 asV31Pdu1S2+0x5c AsLiAalDatInd+0x11c SAA_F0_a_dl_data_ind+0x40 SAA_F_handler+0x430 SIG_F0_lrdata+0x30 SIG_F0_lrput+0xe8 putnext+0x74 CAM_F0_sp_dataind+0x5c streams_put+0xe0 CAM_F_data_ind+0x154 alx_receive_it+0x570 alx_isr+0x11c wsio_interrupt+0x4c mp_ext_interrupt+0x2a0 $RDB_int_patch+0x58 idle+0x9f4 swidle_exit+0x0 - JAGaa45619: ATM not operational on card with higher card Instance Id. The ATM software was expecting the card instance Id to be less than 16. But on some platforms with a lot of slots, the card instance Id of an ATM card can be greater than 16. - JAGaa03065: Unable to configure or modify configuration of ATM on system with short filename (less than 14 characters). This might occur on system where PVCs are traffic descriptors are cofigured for a CIP or LANE interface. The root cause is that filename of some temporary files used as locks for synchronyzing ATM configuration, when truncated to 14 characters, conflict with the name of configuration files used to save PVCs or traffic descriptors parameters. - 5003451872:ATM with the J2499A Hardware silently discard packets. This results to performance or data transmission problems with ATM cards J2499A, J2469A and J2468A with the following nettl WARNING logging: [ALXHDM] Aal5 prot encoutered on cid ... Resolution: - 5003388405: Added EMS support for High Availability (EMS HA-ATM) especially to be able to define two packages on the same elan. - 1653272641,1653270694: Added EMS support for High Availability (EMS HA-ATM) especially to not have to launch manually the monitor daemon to recover HA functionnality over ATM. - 5003423764: swverify returns errors: Update ATM subsystem definition file /usr/sam/lib/kc/subsys.ATM.tx properly. - 5003431551: Implement all mib-II counters supported by HP. - 5003423194: wait until carrier is stable before notifying to ATM stack change in operational status. - 5003401950: No longer restrict calling ATM address to unicast. - 5003359661: Change LEC implementation to be able enable reception of multicast packets. - 1653282145:Optimize handling of LE_ARP entry timers to consume less on the expense of data transfer. - 5003447136: Change ILMI to not block LEC the process of joining elan services. - 5003447029: take into account properly memory allocation failure. - 5003447011: take into account properly memory allocation failure - JAGaa46673: clean up ELAN interface structures after switching from token-ring to Ethernet. - JAGaa51478: data page fault panic in function cmRmvCbTq. Pass correct parameter to the function. - JAGaa45619: Increase the maximum value expected for CArd Instance Id to 31. - JAGaa030651: Change the name of lock files to avoid conflict with configuration files when truncated to 14 characters. - 5003451872: no longer discard packets with CPCS-UU or CPI fields in AAL-5 trailer not set to 0. PHNE_14470: - JAGaa08151 : Panic in the signaling mux when logging a message. This occurs when some specific troubles are experienced in the atm conf. panic+0x10 report_trap_or_int_and_panic+0xe8 trap+0xf88 $RDB_trap_patch+0x20 strlen+0xc ALT_F_Log+0x288 SSV_F0_log_cnevt+0x70 SSV_F_handler+0x76c SMG_F_call_services_handler+0x7c PtUiAmtStaInd+0x4c AmUiAmtStaInd+0x44 AmUiAmtRstReq+0x42c SSV_F0_generate_restart+0xac SSV_F_handler+0x650 SIG_F0_lrproto+0x58c SIG_F0_lrsrv+0xbc sq_wrapper+0xb8 - JAGaa06532 and JAGaa08068 : routing through a CIP interface does not work - JAGaa06022 : spare fields in LE_ARP_xx are no more checked - JAGaa06531 : Unsollicited LE_ARP_RESPONSE are no more used. - JAGaa08113 : When installing a patch including ATMHA the HA configuration were no more seen by SAM. - GREhp11919 and GREhp11888 : When using HSC ATM cards and if shared interrupt mechanism used ( when lot of devices installed) some incoming message may not be processed. - GREhp11758: potential data corruption - GREhp11485: No file of the atm bundle has now a name exceeding 14 characters PHNE_13827: - GREhp11500: Updating the mac address is not correctly done and the atm nic must be replaced PHNE_13613: - GREhp11053: Lan emulation does not work properly when 16 ATM nics installed - GREhp11024: Now an incoming lec to lec setup is not rejected if no connection control bloc exists, even is the src atm address is lower than the local one - GREhp10953: Unused CIP svcs dynamically created - GREhp10883: Elan name initialization improved - GREhp11241: PCI parity errors not detected (kernel safety) - GREhp10685: Memory corruption in stress situations, causing panic or hang - GREhp10842: GSC bus heavy use, may cause other I/O cards to fail, causing panic - GREhp10898: Rare instances of panic when ATM interface is stopped - GREhp11335: Panic during boot on systems having lots of I/O cards, caused by bad detection of shared interrupt level stack trace for event 0 crash event was a panic panic+0x10 report_trap_or_int_and_panic+0xe8 interrupt+0x458 $ihndlr_rtn+0x0 alx_isr+0x1a8 wsio_interrupt+0x4c pa_shared_interrupt+0x34 mp_ext_interrupt+0x2a0 $RDB_int_patch+0x58 idle+0x754 swidle_exit+0x0 - GREhp11118: Rare instances of panic in case of low memory situations - GREhp10684: Incorrect output of "atmmgr show -t" - GREhp11224: Support of 4096 VCs on 622 Mb cards - GREhp11247: Error reported by the "atmloop" test utility PHNE_13379: - GREhp10875: Data Page Fault during reinstall with trafic - GREhp11064: Panic creating 12 CBR PVCs - GREhp11131: Spinlock deadlock panic lauching reliability - GREhp10929: ftp/rcp periodic failure - GREhp11053: No Elan available using 16 cards - GREhp10531: Bad 140 Mbps default trafic parameter - GREhp11066: UBR / CBR mismatch in atmmgr show -t SR: 5003388405 5003423764 5003431551 5003423194 5003401950 5003359661 1653270694 1653272641 1653257253 5003437756 1653282145 5003447136 5003447029 5003447011 4701379248 1653248930 1653261529 5003416495 5003451872 5003458067 5003359836 5003463679 5003429381 1653310185 1653308841 5003453373 4700102764 8606103177 8606107499 8606107574 8606125676 8606126548 8606128231 8606132203 8606132968 8606134224 8606135426 8606138099 8606140027 8606145383 8606146378 8606147517 8606151979 8606152147 8606157776 8606157967 8606158088 8606187025 8606184199 8606195956 8606220927 8606184449 8606209136 8606110441 8606157664 8606202724 8606147741 8606208589 Patch Files: ATMHSC.ATMHSC-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_32,v=HP: ATMHSC.ATMHSC-KRN,fr=F.11.00.00,fa=HP-UX_B.11.00_32,v=HP: ATMHSC.ATMHSC-KRN,fr=G.11.00.00,fa=HP-UX_B.11.00_32,v=HP: ATMHSC.ATMHSC-KRN,fr=H.11.00.00,fa=HP-UX_B.11.00_32,v=HP: ATMHSC.ATMHSC-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_32,v=HP: ATMHSC.ATMHSC-KRN,fr=I.11.00.10,fa=HP-UX_B.11.00_32,v=HP: /usr/conf/lib/libatmgsc.a /usr/conf/lib/atmgsc_dbg.o /usr/conf/master.d/atmgsc ATMHSC.ATMHSC-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_64,v=HP: ATMHSC.ATMHSC-KRN,fr=F.11.00.00,fa=HP-UX_B.11.00_64,v=HP: ATMHSC.ATMHSC-KRN,fr=G.11.00.00,fa=HP-UX_B.11.00_64,v=HP: ATMHSC.ATMHSC-KRN,fr=H.11.00.00,fa=HP-UX_B.11.00_64,v=HP: ATMHSC.ATMHSC-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_64,v=HP: ATMHSC.ATMHSC-KRN,fr=I.11.00.10,fa=HP-UX_B.11.00_64,v=HP: /usr/conf/lib/libatmgsc.a /usr/conf/lib/atmgsc_dbg.o /usr/conf/master.d/atmgsc ATM2HSC.ATM2HSC-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_32,v=HP: ATM2HSC.ATM2HSC-KRN,fr=F.11.00.00,fa=HP-UX_B.11.00_32,v=HP: ATM2HSC.ATM2HSC-KRN,fr=G.11.00.00,fa=HP-UX_B.11.00_32,v=HP: ATM2HSC.ATM2HSC-KRN,fr=H.11.00.00,fa=HP-UX_B.11.00_32,v=HP: ATM2HSC.ATM2HSC-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_32,v=HP: ATM2HSC.ATM2HSC-KRN,fr=I.11.00.10,fa=HP-UX_B.11.00_32,v=HP: /usr/conf/lib/libatm2gsc.a /usr/conf/lib/atm2gsc_dbg.o /usr/conf/master.d/atm2gsc ATM2HSC.ATM2HSC-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_64,v=HP: ATM2HSC.ATM2HSC-KRN,fr=F.11.00.00,fa=HP-UX_B.11.00_64,v=HP: ATM2HSC.ATM2HSC-KRN,fr=G.11.00.00,fa=HP-UX_B.11.00_64,v=HP: ATM2HSC.ATM2HSC-KRN,fr=H.11.00.00,fa=HP-UX_B.11.00_64,v=HP: ATM2HSC.ATM2HSC-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_64,v=HP: ATM2HSC.ATM2HSC-KRN,fr=I.11.00.10,fa=HP-UX_B.11.00_64,v=HP: /usr/conf/lib/libatm2gsc.a /usr/conf/lib/atm2gsc_dbg.o /usr/conf/master.d/atm2gsc ATM2HSC.ATM2HSC-RUN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATM2HSC.ATM2HSC-RUN,fr=F.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATM2HSC.ATM2HSC-RUN,fr=G.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATM2HSC.ATM2HSC-RUN,fr=H.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATM2HSC.ATM2HSC-RUN,fr=I.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATM2HSC.ATM2HSC-RUN,fr=I.11.00.10,fa=HP-UX_B.11.00_32/64, v=HP: /usr/sbin/alxdump ATMPB.ATMPB-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_32,v=HP: ATMPB.ATMPB-KRN,fr=F.11.00.00,fa=HP-UX_B.11.00_32,v=HP: ATMPB.ATMPB-KRN,fr=G.11.00.00,fa=HP-UX_B.11.00_32,v=HP: ATMPB.ATMPB-KRN,fr=H.11.00.00,fa=HP-UX_B.11.00_32,v=HP: ATMPB.ATMPB-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_32,v=HP: ATMPB.ATMPB-KRN,fr=I.11.00.10,fa=HP-UX_B.11.00_32,v=HP: /usr/conf/lib/libatmnio.a /usr/conf/lib/atmnio_dbg.o /usr/conf/master.d/atmnio ATMPCI.ATMPCI-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_64,v=HP: ATMPCI.ATMPCI-KRN,fr=F.11.00.00,fa=HP-UX_B.11.00_64,v=HP: ATMPCI.ATMPCI-KRN,fr=G.11.00.00,fa=HP-UX_B.11.00_64,v=HP: ATMPCI.ATMPCI-KRN,fr=H.11.00.00,fa=HP-UX_B.11.00_64,v=HP: ATMPCI.ATMPCI-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_64,v=HP: ATMPCI.ATMPCI-KRN,fr=I.11.00.10,fa=HP-UX_B.11.00_64,v=HP: /usr/conf/lib/libatmpci.a /usr/conf/lib/atmpci_dbg.o /usr/conf/master.d/atmpci ATM2PCI.ATM2PCI-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_32,v=HP: ATM2PCI.ATM2PCI-KRN,fr=I.11.00.10,fa=HP-UX_B.11.00_32,v=HP: /usr/conf/lib/libatm2pci.a /usr/conf/lib/atm2pci_dbg.o /usr/conf/master.d/atm2pci ATM2PCI.ATM2PCI-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_64,v=HP: ATM2PCI.ATM2PCI-KRN,fr=I.11.00.10,fa=HP-UX_B.11.00_64,v=HP: /usr/conf/lib/libatm2pci.a /usr/conf/lib/atm2pci_dbg.o /usr/conf/master.d/atm2pci ATMCORE.ATMCORE-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_32,v=HP: ATMCORE.ATMCORE-KRN,fr=F.11.00.00,fa=HP-UX_B.11.00_32,v=HP: ATMCORE.ATMCORE-KRN,fr=G.11.00.00,fa=HP-UX_B.11.00_32,v=HP: ATMCORE.ATMCORE-KRN,fr=H.11.00.00,fa=HP-UX_B.11.00_32,v=HP: ATMCORE.ATMCORE-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_32,v=HP: ATMCORE.ATMCORE-KRN,fr=I.11.00.10,fa=HP-UX_B.11.00_32,v=HP: /usr/conf/lib/libatm.a /usr/conf/lib/atm_dbg.o /usr/conf/master.d/atm ATMCORE.ATMCORE-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_64,v=HP: ATMCORE.ATMCORE-KRN,fr=F.11.00.00,fa=HP-UX_B.11.00_64,v=HP: ATMCORE.ATMCORE-KRN,fr=G.11.00.00,fa=HP-UX_B.11.00_64,v=HP: ATMCORE.ATMCORE-KRN,fr=H.11.00.00,fa=HP-UX_B.11.00_64,v=HP: ATMCORE.ATMCORE-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_64,v=HP: ATMCORE.ATMCORE-KRN,fr=I.11.00.10,fa=HP-UX_B.11.00_64,v=HP: /usr/conf/lib/libatm.a /usr/conf/lib/atm_dbg.o /usr/conf/master.d/atm ATMCORE.ATMCORE-RUN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATMCORE.ATMCORE-RUN,fr=F.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATMCORE.ATMCORE-RUN,fr=G.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATMCORE.ATMCORE-RUN,fr=H.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATMCORE.ATMCORE-RUN,fr=I.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATMCORE.ATMCORE-RUN,fr=I.11.00.10,fa=HP-UX_B.11.00_32/64, v=HP: /usr/sbin/atminit /usr/sbin/atmstop /usr/sbin/atminit_net /usr/sbin/atmstop_net /usr/sbin/atminitd /usr/sbin/atmtune /usr/sbin/atmmgr /usr/sbin/atmconfig /usr/sbin/elstat /usr/sbin/elarp /usr/lib/nls/msg/C/atminit.cat /usr/lib/nls/msg/C/atmmgr.cat /usr/lib/nls/msg/C/atmconfig.cat /usr/lib/nls/msg/C/elarp.cat /usr/lib/nls/msg/C/elstat.cat /usr/lib/nls/msg/C/atmloop.cat /usr/lib/nls/msg/C/atmcheck.cat /usr/lib/nls/msg/C/atmserver.cat /usr/lib/nls/msg/C/atm.cat /usr/newconfig/etc/rc.config.d/atmconf /sbin/init.d/atm /usr/sbin/atmstrsrvd /usr/lib/libatmfmt.sl /usr/sbin/atmdebug /usr/sbin/atmloop /usr/sbin/atmcheck /usr/lbin/atmserver /usr/lbin/ilmid /usr/newconfig/etc/atm/ilmid.conf /etc/atmrev/atm2to3 /etc/atmrev/atm3to4 /etc/atmrev/atm4to5 /usr/contrib/bin/atminfo ATMCORE.ATMCORE-MAN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATMCORE.ATMCORE-MAN,fr=F.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATMCORE.ATMCORE-MAN,fr=G.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATMCORE.ATMCORE-MAN,fr=H.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATMCORE.ATMCORE-MAN,fr=I.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATMCORE.ATMCORE-MAN,fr=I.11.00.10,fa=HP-UX_B.11.00_32/64, v=HP: /usr/share/man/man1m.Z/atmcheck.1m /usr/share/man/man1m.Z/atmserver.1m /usr/share/man/man1m.Z/atminit.1m /usr/share/man/man1m.Z/atminit_net.1m /usr/share/man/man1m.Z/atmmgr.1m /usr/share/man/man1m.Z/atmloop.1m /usr/share/man/man1m.Z/atmstop.1m /usr/share/man/man1m.Z/atmstop_net.1m /usr/share/man/man1m.Z/atmconfig.1m /usr/share/man/man1m.Z/elarp.1m /usr/share/man/man1m.Z/elstat.1m ATMCORE.ATMCORE-SNMP,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATMCORE.ATMCORE-SNMP,fr=F.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATMCORE.ATMCORE-SNMP,fr=G.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATMCORE.ATMCORE-SNMP,fr=H.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATMCORE.ATMCORE-SNMP,fr=I.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATMCORE.ATMCORE-SNMP,fr=I.11.00.10,fa=HP-UX_B.11.00_32/64, v=HP: /usr/sbin/atmsubagt /sbin/init.d/SnmpAtm /etc/rc.config.d/SnmpAtm ATMHA.ATMHA-RUN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP: ATMHA.ATMHA-RUN,fr=F.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP: ATMHA.ATMHA-RUN,fr=G.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP: ATMHA.ATMHA-RUN,fr=H.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP: ATMHA.ATMHA-RUN,fr=I.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP: ATMHA.ATMHA-RUN,fr=I.11.00.10,fa=HP-UX_B.11.00_32/64,v=HP: /opt/hatmmon/lib/libgendico.sl /opt/hatmmon/lib/libgenreply.sl /opt/hatmmon/lib/libhaconfig.sl /opt/hatmmon/sbin/hatmmon /opt/hatmmon/sbin/serv_hatmmon /opt/hatmmon/sbin/hatmmigrate /opt/hatmmon/lib/libatmconfig.sl /opt/hatmmon/lib/libatmsts.sl /opt/hatmmon/lib/libatmstse.sl /opt/hatmmon/lib/libgenutil.sl /opt/hatmmon/lib/libgenutile.sl /opt/hatmmon/lib/libshaconfig.sl /opt/hatmmon/lib/libipaddr.sl /opt/hatmmon/lib/libsamcfg.sl /opt/hatmmon/lib/libatmcmds.sl /opt/hatmmon/lib/nls/msg/C/hatmmon.cat /opt/hatmmon/lib/nls/msg/C/hatmmone.cat ATMHA.ATMHA-MAN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP: ATMHA.ATMHA-MAN,fr=F.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP: ATMHA.ATMHA-MAN,fr=G.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP: ATMHA.ATMHA-MAN,fr=H.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP: ATMHA.ATMHA-MAN,fr=I.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP: ATMHA.ATMHA-MAN,fr=I.11.00.10,fa=HP-UX_B.11.00_32/64,v=HP: /opt/hatmmon/share/man/man1m.Z/hatmmon.1m /opt/hatmmon/share/man/man1m.Z/serv_hatmmon.1m ATMSAM.ATMSAM-RUN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP: ATMSAM.ATMSAM-RUN,fr=F.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP: ATMSAM.ATMSAM-RUN,fr=G.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP: ATMSAM.ATMSAM-RUN,fr=H.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP: ATMSAM.ATMSAM-RUN,fr=I.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP: ATMSAM.ATMSAM-RUN,fr=I.11.00.10,fa=HP-UX_B.11.00_32/64,v=HP: /usr/sam/lbin/atm.sh /usr/sam/lbin/atmupdate.sh /usr/sam/lib/kc/subsys.ATM.tx /usr/sam/lib/kc/params.ATM.tx /usr/sam/lib/kc/drivers.ATM.tx /usr/sam/lib/C/atmnia.ui /usr/sam/lib/C/atminuse.ui /usr/sam/lib/atm/atm.tm /usr/sam/lib/atm/atm.da /usr/sam/lib/atm/libatm.sl ATMSAM.ATMSAM-HELP,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATMSAM.ATMSAM-HELP,fr=F.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATMSAM.ATMSAM-HELP,fr=G.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATMSAM.ATMSAM-HELP,fr=H.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATMSAM.ATMSAM-HELP,fr=I.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: ATMSAM.ATMSAM-HELP,fr=I.11.00.10,fa=HP-UX_B.11.00_32/64, v=HP: /usr/sam/help/C/atm/ATM.sdl what(1) Output: ATMHSC.ATMHSC-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_32,v=HP: /usr/conf/lib/libatmgsc.a: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/conf/lib/atmgsc_dbg.o: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/conf/master.d/atmgsc: None ATMHSC.ATMHSC-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_64,v=HP: /usr/conf/lib/libatmgsc.a: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/conf/lib/atmgsc_dbg.o: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/conf/master.d/atmgsc: None ATM2HSC.ATM2HSC-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_32,v=HP: /usr/conf/lib/libatm2gsc.a: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/conf/lib/atm2gsc_dbg.o: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/conf/master.d/atm2gsc: None ATM2HSC.ATM2HSC-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_64,v=HP: /usr/conf/lib/libatm2gsc.a: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/conf/lib/atm2gsc_dbg.o: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/conf/master.d/atm2gsc: None ATM2HSC.ATM2HSC-RUN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: /usr/sbin/alxdump: None ATMPB.ATMPB-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_32,v=HP: /usr/conf/lib/libatmnio.a: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/conf/lib/atmnio_dbg.o: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/conf/master.d/atmnio: None ATMPCI.ATMPCI-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_64,v=HP: /usr/conf/lib/libatmpci.a: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/conf/lib/atmpci_dbg.o: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/conf/master.d/atmpci: None ATM2PCI.ATM2PCI-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_32,v=HP: /usr/conf/lib/libatm2pci.a: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/conf/lib/atm2pci_dbg.o: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/conf/master.d/atm2pci: None ATM2PCI.ATM2PCI-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_64,v=HP: /usr/conf/lib/libatm2pci.a: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/conf/lib/atm2pci_dbg.o: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/conf/master.d/atm2pci: None ATMCORE.ATMCORE-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_32,v=HP: /usr/conf/lib/libatm.a: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) ATMSAM_5 /usr/conf/lib/atm_dbg.o: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/conf/master.d/atm: None ATMCORE.ATMCORE-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_64,v=HP: /usr/conf/lib/libatm.a: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) ATMSAM_5 /usr/conf/lib/atm_dbg.o: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/conf/master.d/atm: None ATMCORE.ATMCORE-RUN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: /usr/sbin/atminit: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) ATMSAM_5 ATMSAM_5 /usr/sbin/atmstop: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) ATMSAM_5 ATMSAM_5 /usr/sbin/atminit_net: ATMSAM_5 ATMSAM_5 /usr/sbin/atmstop_net: ATMSAM_5 ATMSAM_5 /usr/sbin/atminitd: None /usr/sbin/atmtune: None /usr/sbin/atmmgr: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) ATMSAM_5 /usr/sbin/atmconfig: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) ATMSAM_5 /usr/sbin/elstat: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/sbin/elarp: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/lib/nls/msg/C/atminit.cat: None /usr/lib/nls/msg/C/atmmgr.cat: None /usr/lib/nls/msg/C/atmconfig.cat: None /usr/lib/nls/msg/C/elarp.cat: None /usr/lib/nls/msg/C/elstat.cat: None /usr/lib/nls/msg/C/atmloop.cat: None /usr/lib/nls/msg/C/atmcheck.cat: None /usr/lib/nls/msg/C/atmserver.cat: None /usr/lib/nls/msg/C/atm.cat: None /usr/newconfig/etc/rc.config.d/atmconf: None /sbin/init.d/atm: None /usr/sbin/atmstrsrvd: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) queue primitives (ATQ) $Revision: 6.1 $ /usr/lib/libatmfmt.sl: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/sbin/atmdebug: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/sbin/atmloop: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/sbin/atmcheck: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/lbin/atmserver: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/lbin/ilmid: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /usr/newconfig/etc/atm/ilmid.conf: None /etc/atmrev/atm2to3: ATMSAM_3 ATMSAM_3 /etc/atmrev/atm3to4: None /etc/atmrev/atm4to5: None /usr/contrib/bin/atminfo: None ATMCORE.ATMCORE-MAN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: /usr/share/man/man1m.Z/atmcheck.1m: None /usr/share/man/man1m.Z/atmserver.1m: None /usr/share/man/man1m.Z/atminit.1m: None /usr/share/man/man1m.Z/atminit_net.1m: None /usr/share/man/man1m.Z/atmmgr.1m: None /usr/share/man/man1m.Z/atmloop.1m: None /usr/share/man/man1m.Z/atmstop.1m: None /usr/share/man/man1m.Z/atmstop_net.1m: None /usr/share/man/man1m.Z/atmconfig.1m: None /usr/share/man/man1m.Z/elarp.1m: None /usr/share/man/man1m.Z/elstat.1m: None ATMCORE.ATMCORE-SNMP,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: /usr/sbin/atmsubagt: ATM SNMP Subagent rev. A.11.00.ic23 (21-Jan-98_15:00 , 1.10) Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 Copyright 1992-1996 SNMP Research, Incorporated SNMP Research Distribution version 14.0.0.0 /sbin/init.d/SnmpAtm: None /etc/rc.config.d/SnmpAtm: None ATMHA.ATMHA-RUN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP: /opt/hatmmon/lib/libgendico.sl: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /opt/hatmmon/lib/libgenreply.sl: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /opt/hatmmon/lib/libhaconfig.sl: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /opt/hatmmon/sbin/hatmmon: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /opt/hatmmon/sbin/serv_hatmmon: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /opt/hatmmon/sbin/hatmmigrate: None /opt/hatmmon/lib/libatmconfig.sl: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /opt/hatmmon/lib/libatmsts.sl: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /opt/hatmmon/lib/libatmstse.sl: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /opt/hatmmon/lib/libgenutil.sl: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /opt/hatmmon/lib/libgenutile.sl: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /opt/hatmmon/lib/libshaconfig.sl: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /opt/hatmmon/lib/libipaddr.sl: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /opt/hatmmon/lib/libsamcfg.sl: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /opt/hatmmon/lib/libatmcmds.sl: ATM Networking rev. I.11.00.13 PHNE_25502 (14-Feb-02 _14:27, 7.39.4.3) /opt/hatmmon/lib/nls/msg/C/hatmmon.cat: None /opt/hatmmon/lib/nls/msg/C/hatmmone.cat: None ATMHA.ATMHA-MAN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP: /opt/hatmmon/share/man/man1m.Z/hatmmon.1m: None /opt/hatmmon/share/man/man1m.Z/serv_hatmmon.1m: None ATMSAM.ATMSAM-RUN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP: /usr/sam/lbin/atm.sh: None /usr/sam/lbin/atmupdate.sh: None /usr/sam/lib/kc/subsys.ATM.tx: None /usr/sam/lib/kc/params.ATM.tx: None /usr/sam/lib/kc/drivers.ATM.tx: None /usr/sam/lib/C/atmnia.ui: None /usr/sam/lib/C/atminuse.ui: None /usr/sam/lib/atm/atm.tm: atm.tm */ /usr/sam/lib/atm/atm.da: None /usr/sam/lib/atm/libatm.sl: ATM-SAM/HP-UX 11.X/Rev.C2.57 date:04/07/99 22:22:33 ATMSAM.ATMSAM-HELP,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: /usr/sam/help/C/atm/ATM.sdl: None cksum(1) Output: ATMHSC.ATMHSC-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_32,v=HP: 1622161572 75372 /usr/conf/lib/libatmgsc.a 81368927 210052 /usr/conf/lib/atmgsc_dbg.o 3089686579 4322 /usr/conf/master.d/atmgsc ATMHSC.ATMHSC-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_64,v=HP: 3896357639 141656 /usr/conf/lib/libatmgsc.a 3755683528 259776 /usr/conf/lib/atmgsc_dbg.o 3089686579 4322 /usr/conf/master.d/atmgsc ATM2HSC.ATM2HSC-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_32,v=HP: 1126814603 134120 /usr/conf/lib/libatm2gsc.a 2648256459 190660 /usr/conf/lib/atm2gsc_dbg.o 3732861397 4330 /usr/conf/master.d/atm2gsc ATM2HSC.ATM2HSC-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_64,v=HP: 3115169109 257424 /usr/conf/lib/libatm2gsc.a 451177735 235328 /usr/conf/lib/atm2gsc_dbg.o 3732861397 4330 /usr/conf/master.d/atm2gsc ATM2HSC.ATM2HSC-RUN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: 3858556015 40960 /usr/sbin/alxdump ATMPB.ATMPB-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_32,v=HP: 1022424135 56128 /usr/conf/lib/libatmnio.a 3034220141 212232 /usr/conf/lib/atmnio_dbg.o 1430530863 4337 /usr/conf/master.d/atmnio ATMPCI.ATMPCI-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_64,v=HP: 1520559016 98612 /usr/conf/lib/libatmpci.a 1300311816 216208 /usr/conf/lib/atmpci_dbg.o 1112539027 4337 /usr/conf/master.d/atmpci ATM2PCI.ATM2PCI-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_32,v=HP: 154535041 161364 /usr/conf/lib/libatm2pci.a 1517215613 197436 /usr/conf/lib/atm2pci_dbg.o 1161035540 4344 /usr/conf/master.d/atm2pci ATM2PCI.ATM2PCI-KRN,fr=I.11.00.00,fa=HP-UX_B.11.00_64,v=HP: 1044136350 307000 /usr/conf/lib/libatm2pci.a 1558173131 243360 /usr/conf/lib/atm2pci_dbg.o 1161035540 4344 /usr/conf/master.d/atm2pci ATMCORE.ATMCORE-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_32,v=HP: 3405395789 1649072 /usr/conf/lib/libatm.a 2702741359 574460 /usr/conf/lib/atm_dbg.o 2577838070 4894 /usr/conf/master.d/atm ATMCORE.ATMCORE-KRN,fr=E.11.00.00,fa=HP-UX_B.11.00_64,v=HP: 856745450 3099440 /usr/conf/lib/libatm.a 1750998347 724968 /usr/conf/lib/atm_dbg.o 2577838070 4894 /usr/conf/master.d/atm ATMCORE.ATMCORE-RUN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: 2598755842 114688 /usr/sbin/atminit 3466532140 65536 /usr/sbin/atmstop 2274306862 118784 /usr/sbin/atminit_net 716929342 65536 /usr/sbin/atmstop_net 2184063268 32768 /usr/sbin/atminitd 2242769285 28672 /usr/sbin/atmtune 3173348225 81920 /usr/sbin/atmmgr 3828381602 73728 /usr/sbin/atmconfig 854517574 36864 /usr/sbin/elstat 4170613559 36864 /usr/sbin/elarp 444144735 6108 /usr/lib/nls/msg/C/atminit.cat 3407368382 9341 /usr/lib/nls/msg/C/atmmgr.cat 2681125084 6101 /usr/lib/nls/msg/C/atmconfig.cat 1799426494 996 /usr/lib/nls/msg/C/elarp.cat 1411790108 986 /usr/lib/nls/msg/C/elstat.cat 2426629005 3555 /usr/lib/nls/msg/C/atmloop.cat 3993147177 3361 /usr/lib/nls/msg/C/atmcheck.cat 2140544740 3755 /usr/lib/nls/msg/C/atmserver.cat 1555559073 85551 /usr/lib/nls/msg/C/atm.cat 2536119484 2014 /usr/newconfig/etc/rc.config.d/atmconf 1970043873 13489 /sbin/init.d/atm 1466434435 20480 /usr/sbin/atmstrsrvd 3842567334 626688 /usr/lib/libatmfmt.sl 3894117425 20480 /usr/sbin/atmdebug 4212371680 40960 /usr/sbin/atmloop 1423394112 45056 /usr/sbin/atmcheck 2210586563 40960 /usr/lbin/atmserver 1866804676 245760 /usr/lbin/ilmid 2186828048 2629 /usr/newconfig/etc/atm/ilmid.conf 4232259267 5035 /etc/atmrev/atm2to3 3645962800 10902 /etc/atmrev/atm3to4 1463819247 1635 /etc/atmrev/atm4to5 3149887817 19117 /usr/contrib/bin/atminfo ATMCORE.ATMCORE-MAN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: 644405512 2989 /usr/share/man/man1m.Z/atmcheck.1m 644405512 2989 /usr/share/man/man1m.Z/atmserver.1m 3021942581 8548 /usr/share/man/man1m.Z/atminit.1m 3021942581 8548 /usr/share/man/man1m.Z/atminit_net.1m 3662399378 7631 /usr/share/man/man1m.Z/atmmgr.1m 2395379543 1238 /usr/share/man/man1m.Z/atmloop.1m 1674776955 1380 /usr/share/man/man1m.Z/atmstop.1m 1674776955 1380 /usr/share/man/man1m.Z/atmstop_net.1m 3663350231 5122 /usr/share/man/man1m.Z/atmconfig.1m 129058109 1297 /usr/share/man/man1m.Z/elarp.1m 2604607896 2140 /usr/share/man/man1m.Z/elstat.1m ATMCORE.ATMCORE-SNMP,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: 1342910918 270336 /usr/sbin/atmsubagt 2112560390 5912 /sbin/init.d/SnmpAtm 1882899865 2252 /etc/rc.config.d/SnmpAtm ATMHA.ATMHA-RUN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP: 2141860854 12288 /opt/hatmmon/lib/libgendico.sl 3985993483 16384 /opt/hatmmon/lib/libgenreply.sl 445571773 24576 /opt/hatmmon/lib/libhaconfig.sl 2542466574 24576 /opt/hatmmon/sbin/hatmmon 1608481819 20480 /opt/hatmmon/sbin/serv_hatmmon 3834657292 12354 /opt/hatmmon/sbin/hatmmigrate 4030696277 16384 /opt/hatmmon/lib/libatmconfig.sl 530387242 20480 /opt/hatmmon/lib/libatmsts.sl 3286119254 24576 /opt/hatmmon/lib/libatmstse.sl 394784813 20480 /opt/hatmmon/lib/libgenutil.sl 3482682793 20480 /opt/hatmmon/lib/libgenutile.sl 504194501 20480 /opt/hatmmon/lib/libshaconfig.sl 1726315515 16384 /opt/hatmmon/lib/libipaddr.sl 2356059168 16384 /opt/hatmmon/lib/libsamcfg.sl 641811040 12288 /opt/hatmmon/lib/libatmcmds.sl 3995267856 3986 /opt/hatmmon/lib/nls/msg/C/hatmmon.cat 764099185 9292 /opt/hatmmon/lib/nls/msg/C/hatmmone.cat ATMHA.ATMHA-MAN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP: 1980342354 1942 /opt/hatmmon/share/man/man1m.Z/hatmmon.1m 988893910 2157 /opt/hatmmon/share/man/man1m.Z/ serv_hatmmon.1m ATMSAM.ATMSAM-RUN,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64,v=HP: 3471010117 40353 /usr/sam/lbin/atm.sh 1586834868 9106 /usr/sam/lbin/atmupdate.sh 730695045 636 /usr/sam/lib/kc/subsys.ATM.tx 3120600062 83 /usr/sam/lib/kc/params.ATM.tx 228291395 578 /usr/sam/lib/kc/drivers.ATM.tx 3005107349 100820 /usr/sam/lib/C/atmnia.ui 707576599 1337 /usr/sam/lib/C/atminuse.ui 871006298 64237 /usr/sam/lib/atm/atm.tm 4000583297 3256 /usr/sam/lib/atm/atm.da 3615581893 187344 /usr/sam/lib/atm/libatm.sl ATMSAM.ATMSAM-HELP,fr=E.11.00.00,fa=HP-UX_B.11.00_32/64, v=HP: 1823976388 130038 /usr/sam/help/C/atm/ATM.sdl Patch Conflicts: None Patch Dependencies: s700: 11.00: PHKL_13081 PHKL_14532 PHKL_14606 s800: 11.00: PHKL_13081 PHKL_14532 PHKL_14606 Hardware Dependencies: None Other Dependencies: None Supersedes: PHNE_13379 PHNE_13613 PHNE_13827 PHNE_14470 PHNE_17270 PHNE_18444 PHNE_21424 PHNE_22033 Equivalent Patches: None Patch Package Size: 12160 KBytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHNE_25502 5. Run swinstall to install the patch: swinstall -x autoreboot=true -x patch_match_target=true \ -s /tmp/PHNE_25502.depot By default swinstall will archive the original software in /var/adm/sw/save/PHNE_25502. If you do not wish to retain a copy of the original software, include the patch_save_files option in the swinstall command above: -x patch_save_files=false WARNING: If patch_save_files is false when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. For future reference, the contents of the PHNE_25502.text file is available in the product readme: swlist -l product -a readme -d @ /tmp/PHNE_25502.depot To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHNE_25502.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: This patch installs only on release I.11.00.10 or earlier. You must remove PHNE_19506 to be able to install this patch. *************************************************** *** *** *** *** *** *** WARNING *** WARNING *** WARNING *** WARNING *** *** *** *** *** *** *************************************************** Several kernel patches are MANDATORY for HSC ATM cards. (PHKL_14532 AND PHKL_14606). If these patches or their successors are not already installed on the system, YOU WILL NOT BE ABLE TO BUILD CORRECTLY THE KERNEL. As this patch works for PCI, HSC and HP-PB ATM products, you may see some normal warnings about some files missing at installation, ignore them.