Patch Name: PHCO_30598 Patch Description: s700_800 11.11 cumulative SAM patch Creation Date: 04/07/26 Post Date: 04/08/03 Hardware Platforms - OS Releases: s700: 11.11 s800: 11.11 Products: N/A Filesets: InternetSrvcs.INETSVCS-BOOT,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP OS-Core.UX-CORE,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP SystemAdmin.SAM,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP SystemAdmin.SAM-ENG-A-MAN,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP SystemAdmin.SAM-HELP,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP Automatic Reboot?: No Status: General Release Critical: No Category Tags: defect_repair hardware_enablement enhancement general_release manual_dependencies Path Name: /hp-ux_patches/s700_800/11.X/PHCO_30598 Symptoms: PHCO_30598: JAGaf32099) For an EVA disk array, SAM->Disks and FileSystems->Disk Devices functional area displays the alternate path to a disk as a separate LUN if the device identifier bytes do not match. PHCO_29327: JAGad98578) SAM displays junk values against the "Configure Aliases..." button in the "Modify Host in File" screen. Also, SAM displays an empty "Configure Aliases" screen on choosing the "Configure Aliases" button in the following scenario: Enter "SAM -> Networking and Communications -> Hosts -> Local Hosts" subarea, select an entry and choose the "Modify" menu item from the "Actions" menu. JAGae16057) The following warning messages appear at boot time for SNA drivers on the console and can also be seen using the dmesg(1M) command at the command-line prompt: ----------------------------------------------- WARNING: modld: Module sixd, is already statically linked. WARNING: modld: Module sixm, is already statically linked. WARNING: modld: Module sixp, is already statically linked. WARNING: modld: Module sixq, is already statically linked. WARNING: modld: Module sixr, is already statically linked. WARNING: modld: Module sixt, is already statically linked. ----------------------------------------------- The warning messages appear in the following scenario: Enter "SAM-> Networking and Communications -> SNAPlus2 Installation" subarea, select "SNAplus2 Environment" and then choose the "Add" menu item under the "Actions" menu. Select other SNAplus2 components that have the status, "Not Added", and add them using the "Add" menu item in the "Actions" menu. Select "File-> Exit" and click "Yes" to the confirmation message. In the "Create a New Kernel" window, select the "Create a New Kernel Now" option and click the OK button on "Reboot the System" window. JAGae26852) When an interface is configured with an IPv4/ IPv6 address that is already assigned to any other interface, SAM correctly displays an error message but writes duplicate IPv4/IPv6 addresses into the files /etc/rc.config.d/netconf or /etc/rc.config.d/netconf-ipv6 and erroneous changes are made to the file /etc/hosts in the following scenario: Enter "SAM -> Networking and Communications -> Network Interface Cards" subarea, and choose the "Modify" menu item from the "Actions" menu. JAGae44626) SAM does not allow management of local users and local groups on an NIS+ enabled system when the NIS+ master server is not reachable. JAGae48820) SAM fails to display the following error message while configuring the "Advanced Options" for a gelan card: ----------------------------------------------- Jumbo frames can be configured only at Gigabit speeds. Please set Autonegotiation ON if you want MTU of 9000. ----------------------------------------------- The scenario is as follows: Enter "SAM -> Networking and Communications -> Network Interface Cards" subarea, select a 'gelan' card and select the "Modify" menu item from the "Actions" menu. In the "Configure LAN Card" screen, select the value for autoneg field as "OFF" and select the "Advanced Options" button. Select the value for Maximum Transmission Unit as 9000 in the "Configure Advanced Options" screen and click OK. JAGae52086) On entering "SAM -> Accounts for Users and Groups -> NIS+ Users" subarea, SAM stops processing user entries once it encounters an invalid entry in the NIS or NIS+ password table. JAGae52920) While setting up DNS and referring to the DNS settings in /etc/named.boot, SAM displays the following bus error message: ---------------------------------------------- UNEXPECTED EXIT: process LANG=C LC_ALL=C /usr/sam/lbin/samx -C -n -p 4733 -s primary_DNS_server /usr/sam/lib//dns.ui exited with a non-zero exit status. sh: 5175 Bus error(coredump) ---------------------------------------------- The bus error message appears in the following scenario: Enter "SAM -> Networking and Communications -> DNS (BIND) -> DNS Local Name Server" subarea, entries from /etc/named.boot are displayed in the "DNS Local Name Server" screen. Choose the second or third entry and select the "Modify" menu item from the "Actions" menu. JAGae54576) SAM adds a NIS+ user successfully to the password table but fails to update the credentials in the following scenario: Enter "SAM -> Accounts for Users and Groups -> NIS+ Users" subarea. Choose the "Add" menu item from the "Actions" menu and set the "Create User Credentials" as ON in the "Add User" dialog window. This scenario occurs if the credentials already exist for another user with same UID in the parent domain. JAGae54919) SAM does not load ASCII template files or blank template files properly and the following error message is displayed: --------------------------------------------- A SAM internal error has occurred. The error handler has gotten the error code 0 of type NOTE with the associated strings: --------------------------------------------- The error message appears in the following scenario: Enter "SAM -> Kernel Configuration -> Configurable Parameters" subarea, select the "Templates" menu item from the "Actions" menu. Select "Load a Template File..." menu item from the "Actions" menu and provide a valid template file. Select "Apply Template Values..." menu item from the "Actions" menu and select "Refresh List" menu item from the "Options" menu. JAGae56856) The calculation made by SAM to check the space available on the disk does not match the calculations performed by the LVM subsystem in the following scenario: Enter "SAM -> Disks and Filesystems -> Volume Groups" subarea, choose "Actions -> Create" menu item to create a new volume group. JAGae60721) The PCI Token Ring card is disabled even when the driver parameter is not modified in the following scenario: Enter "SAM -> Networking and Communications -> Network Interface Cards" subarea, select an enabled PCI Token Ring card and choose the "Modify" menu item from the "Actions" menu. JAGae61148) The manpage (samlog_view.1) and online help for samlog viewer has to be modified as the date format has changed from YY format to CC or CCYY format, where CC refers to century and YY refers to year. JAGae61160) SAM considers the year as 1970 when "/usr/sam/bin/samlog_viewer" is invoked with year greater than 2037. Also, "/usr/sam/bin/samlog_viewer" is not Y2K compliant. The scenario is as follows: Invoke samlog viewer by issuing the following command by specifying a year greater than 2037: /usr/sam/bin/samlog_viewer -s 120300002038 or click the "Time Range" button in the "SAM log viewer" window. The "Time Range" window appears and in the "Year" field, specify a year greater than 2037. JAGae61583) SAM online help displays incorrect description for the minimum, maximum and default values of "maxdsiz", and "maxdsiz_64" kernel parameters. JAGae67830) A temporary log file with name '0' (zero) is created in the root directory while upgrading from HP-UX 11.00 release to HP-UX 11.11 release. JAGae70332) From /var/sam/log/samlog, it is observed that the ifconfig(1M) command is executed, even if IP parameters are not modified in the following scenario: Enter "SAM -> Networking and Communications -> Network Interface Cards" subarea, select an interface and choose the "Modify" menu item from the "Actions" menu. Do not change IP parameters on the "Configure LAN Card" screen and click OK. JAGae72428) VLAN cannot be viewed or created by SAM and the following error message is displayed: ----------------------------------------------- UNEXPECTED EXIT: process LANG=C LC_ALL=C /usr/sam/lbin/samx -C -n -p 20272 -s nia /usr/sam/lib//nia.ui exited with a non-zero exit status. sh 21100 Memory fault ----------------------------------------------- The error message appears in the following scenario: Enter "SAM -> Networking and Communications -> Network Interface Cards" subarea, and select "Virtual LAN" from the "List" menu. JAGae74095) SAM critical resource analysis (CRA) does not allow online replacement of a card if a mounted file system on any of the disks connected to a card is unmounted from the command-line. The scenario is as follows: Enter "SAM -> Peripheral Devices -> Cards" subarea, select a card and choose the "Replace" menu item under the "Actions" menu. SAM reports the following error message if any of the disks connected to the card has a mounted file system: ----------------------------------------------- CRITICAL: One or more mounted file systems is affected. File systems must be unmounted before the driver can be suspended. Affected file systems on evaluated devices: /FS_Test ----------------------------------------------- Unmount the filesystem using the command /usr/sbin/mount . Repeat the replace action from SAM. The following error message is displayed: ----------------------------------------------- CRITICAL: One or more mounted file systems is affected. File systems must be unmounted before the driver can be suspended. Affected file systems on evaluated devices: /FS_Test ----------------------------------------------- JAGae74460) SAM displays the following error message while performing interactive backup through SAM: ---------------------------------------------- "ERROR sh 11998 Memory fault" ---------------------------------------------- The error message appears in the following scenario: Enter "SAM -> Backup and Recovery -> Interactive Backup and Recovery" subarea, highlight the "Use remote back up device -> Backup Files Interactively" menu item from the "Actions" menu. Click the "Select Backup scope" button from the "Back up Files Interactively" window. JAGae75264) SAM does not check if the logical volume extended is a boot logical volume. On extending the boot logical volume from "SAM -> Disks and Filesystems -> Volume Groups" subarea, the boot information is lost. JAGae76847) SAM fails to power off the OLAR-able slot for 2-port cards when the driver is suspended. The scenario is as follows: Enter "SAM -> Peripheral Devices -> Cards" subarea. Select one of the A5159B/A5838A/A6826/A7011/A7012/ A9782/A5506B cards,and select the "Replace" menu item under the "Actions" menu. After the CRA is completed with no errors, click OK. On the "Replace Cards" window, click "Cancel" to stop the card replacement. This suspends the driver and switches the slot power off. Run the command rad -i to switch the slot power ON. Now, the menu item to switch the slot power OFF is displayed under the "Actions" menu. Select the "slot power OFF" menu item, the following error message is displayed: ---------------------------------------------- Cannot get information about ports associated with I/O slot ---------------------------------------------- JAGae77394) SAM incorrectly updates the file /etc/dhcptab if the start and end address for an entry is the same in the "Reserved Address in Address Pool" screen in the following scenario: Enter "SAM -> Networking and Communications -> Bootable Devices -> DHCP Device Group Booting from this Server" subarea, select the "Add DHCP Group" menu item from the "Actions" menu. In the "Add DHCP Group" screen, select "Subnet Address Pool -> Reserved Address". JAGae78333) Under certain conditions, /usr/sam/bin/samlog_viewer(1M) may not operate properly. JAGae78372) On entering "SAM -> Networking and Communications -> Bootable Devices -> DHCP Device Group Booting from this Server" subarea, SAM exits with the following error message: ---------------------------------------------- UNEXPECTED EXIT: process LANG=C LC_ALL=C /usr/sam/lbin/samx -c -n -p 4560 -s bootp_sa_dhcp_groups /usr/sam/lib//boot.us exited with a non- zero exit status. sh: 4643 memory fault(coredump) ---------------------------------------------- When SAM is used to manage DHCP pools, one can specify IP addresses or ranges of IP addresses to exclude from the pool. The error message is displayed if the exclusion list is more than 4096 bytes. JAGae80232) Under certain conditions, restricted SAM may not operate properly. JAGae83077) SAM does not recognize the virtual array business copy (BC) LUNs and are displayed as "Unused" disks on entering "SAM -> Disk and Filesystems-> Disk Devices" subarea. It has to mark the business copy LUN so that it is not considered for configuration. JAGae83345) On entering "SAM -> Disks and Filesystems -> Disk Devices" subarea and on selecting a virtual array, SAM displays the following invalid menu items under "Disk Array Maintenance": Modify Array Configuration Rebuild Data on Failed Disk Module... Fix Parity Inconsistencies... JAGae84199) A non-existent hardware path entry is displayed on a system configured with a VA74XX family disk array on entering the "SAM -> Peripheral Devices -> Cards" subarea. JAGae85656) When /usr/sam/lbin/ioparser.sh is used to list all interface cards on the system, the Intelligent Platform Management Interface (IPMI) controller device is also listed. This is incorrect as the IPMI Controller device is not technically a card. JAGae86120) When the FC60 LUNs report the world wide identifier of NAA16 disks, SAM does not display the number of paths and LUNs correctly in the "SAM -> Disks and File Systems -> Disk Devices" subarea. JAGae87868) When a user's UID is shared with more than a hundred users, SAM displays jumbled-up strings of user names. JAGae89490) On a system with Securepath software installed, "SAM -> Disk and FileSystems -> Disk Devices" subarea does not display the number of paths for EVA HSV110 disk array correctly. JAGae92769) Enter "SAM -> Peripheral Devices -> Cards" subarea, select a card and choose the "Replace" menu item from the "Actions" menu. Replace it with a dissimiliar card, SAM correctly displays the following error message: ---------------------------------------------- "OLRAD error: Unable to resume the driver(s) (hardware path)" ---------------------------------------------- However, the slot power is left ON and the new dissimilar card comes up as CLAIMED and is displayed in the "Cards" subarea. JAGae93146) SAM and doorbells behave differently in the situation when online replacement of a card with a dissimilar card fails in the following scenario: Enter "SAM -> Peripheral Devices -> Cards" subarea, select a card and choose the "Replace" menu item from the "Actions" menu. When an action is performed to replace a card with a dissimilar card, the replace action fails and SAM leaves the affected slot powered ON. If the same operation is performed using doorbells, the slot will be in powered OFF state. JAGae93152) On a system that supports shared slots, the slot power ON operation may fail due to bus frequency or bus mode mismatch. SAM does not indicate this to the user in the following error message: ------------------------------------------- OLRAD Error: General Error ------------------------------------------- The scenario is as follows: Enter "SAM -> Peripheral Devices -> Cards" subarea, select a card whose slot is powered OFF and try to bring it online by choosing the "Bring Online" menu item in the "Actions" menu. JAGae98452) When the FC60 LUNs report the world wide identifier of NAA16 disks, SAM does not display the number of paths and LUNs correctly in the "SAM -> Disks and File Systems -> Disk Devices" subarea. JAGaf06223) On entering "SAM -> Networking and Communications -> Hosts -> Local Hosts File" subarea, SAM exits with the following error message: ------------------------------------------- UNEXPECTED EXIT: process LANG=C LC_ALL=C /usr/sam/lbin/samx -C -n -p 17908 -s hosts_init_file /usr/sam/lib//hosts.ui exited with a non-zero exit status. sh:18025 Bus error(coredump). ------------------------------------------- JAGaf07880) SAM allows the GID of the special system group "nogroup" to be modified in the following scenario : Enter "SAM -> Accounts For Users and groups -> Groups" subarea and select the group "nogroup". Choose the "Modify" menu item from the "Actions" menu and change the value in the field "Group Id". JAGaf08764) SAM does not correctly display all the interfaces present on the system when an IHV NIC card is installed on the system and IHV's configuration file is not present on the system in the following scenario: Enter "SAM -> Networking and Communications -> Network Interface Cards" subarea. JAGaf14390) On entering "SAM -> Disk and File systems -> File systems" and "SAM -> Networking and Communications -> Network File systems -> Mounted Remote FileSystems" subareas, SAM exits with a memory fault. This error occurs if the size of the autmounter map is larger than 4096 bytes. JAGaf14809) SAM incorrectly displays the value of the "Flow Control" field for gelan, igelan and iether cards as 'ON' in the following scenario: Enter "SAM -> Networking and Communications -> Network Interface Cards" subarea. Select an gelan, igelan or iether card and select the "Modify" menu item from the "Actions" menu. In the "Configure LAN Card" screen, select the "Advanced Options" button. In the "Advanced Options" screen, set the "Flow Control" field to OFF, exit the "Advanced Options" screen and again go to the "Advanced Options" screen. JAGaf23910) IP logical interfaces cannot be configured from "SAM -> Networking and Communications -> Network Interface Cards" subarea. PHCO_28123: JAGae42959) SAM does not support the IETHER LAN card with MTU range 257-9000. JAGae63466) SAM does not recognize the following new hardware devices: Dual port PCI-X 2 Gb/1Gb Fibre Channel Host Bus Adapter (Product# A6826A) EVA GL - HSV110 EVA GL Lite - HSV100 SA5304/256 4 Port RAID HBA - (Product #: A7143A) PCI-X 2 Gb Fibre Channel 1Gb Ethernet Combo Card - (Product #: A9782A) PCI-X 2-Ch Ultra320 SCSI Adapter (Product #: A7173A) PCI 4-channel RAID160 SA SCSI Adapter (Product #: A7143A) PCI-X 2Gb Fibre Channel/1000Base-T HBA (Product #: A9784A) PHCO_27374: JAGad91701) On entering SAM -> Disks and File Systems -> File Systems -> Actions -> Add Remote File System -> Using the NFS Automounter, enter the required information in the "Add Automounted Remote File System" screen and choose OK. In the "File Systems" screen, select a NFS file system and choose Actions -> Remove menu item. The following error message is displayed. ---------------------------------------------- parse_nsswitch: Couldn't open file, '/etc/nsswitch.conf' parse_nsswitch: Couldn't find server, 'automount'. ----------------------------------------------- JAGad94311) Information related to the usage of "Software Distributor" using restricted SAM is not provided in the SAM manpage. JAGae12442) On entering SAM -> Bootable Devices -> Fixed- Address Devices Booting From this Server -> Actions -> Add Fixed-Address Device, in the "Add Fixed-Address Device" window, enter the required information and leave the "Station Address" field blank. Choose OK. SAM displays garbled value for the "Station Address" field. JAGae18088) SAM does not support the configuration of FDDI interfaces with IPv6 addresses. JAGae23125) SAM performs an ioscan(1m) when it is launched by a user having restricted access to "Users and Groups" and "Auditing and Security" subareas. JAGae24469) SAM does not provide the system administration functionality for iSCSI device identification for static discovery,kernel build, and device recognition from ioscan(1m) output. JAGae29286) On entering SAM -> Networking and Communications -> Network Interface Cards subarea, many files remain in the /var/tmp file after SAM networking functions are run. JAGae36062) On entering SAM -> Networking and Communications -> Network Interface Cards, and on choosing the "Configure" or "Modify" menu item from the Actions menu, SAM displays incorrect duplex value for the chosen interface. JAGae36972) When a system administrator modifies or deletes a user, SAM does not update the ownership of symbolic links. The symbolic link retains the previous uid and may cause confusion in the future. JAGae37625) On entering SAM -> Networking and Communications -> NIS+ -> NIS+ Tables. Using Actions -> Change Domains, change the domain from home domain to sub domain and add a user with add entry within Modify Password Table entry. After entering the required information, SAM displays a message to modify the credentials table if a user requires full access privileges. Select a user to add credentials for the home domain and choose Apply. The following error message is displayed. -------------------------------------------- Non-root users have DES credentials only in their home domain. The cred table you are modifying is from sub.rose.hp.com and this user's home domain is rose.hp.com. -------------------------------------------- JAGae41071) On entering SAM -> Accounts for Users and Groups -> NIS+ Users subarea, choose the "Add" menu item from the "Actions" menu. SAM fails to create the home directory for a new NIS+ user when the "Create Home Directory" option is checked in "Add a User Account" window. JAGae41719) On entering SAM -> Networking and Communications -> DNS (BIND) -> DNS Local Name Server subarea, the following error message is displayed even though the system is setup as a DNS name server and is working properly. ---------------------------------------------- This system is not configured as a primary or secondary DNS name server. ---------------------------------------------- Moreover, SAM does not display the contents of the file /etc/named.conf. JAGae44447) On entering SAM -> Networking and Communications -> NIS+ -> NIS+ Tables subarea, select the passwd/trusted table, and select an entry. Choose the "Modify" menu item from the "Actions" menu. SAM displays a screen titled "Modify passwd / trusted table entry".On selecting "passwd table shadow column" on this screen, SAM displays incorrect password aging fields. Also, SAM incorrectly updates passwd format policy and time of the day fields in the trusted table. JAGae44448) On entering SAM ->Networking and Communications -> NIS+ -> NIS+ Tables subarea, select the trusted table and then select an entry. Choose the Modify menu item from the Actions menu. SAM displays a screen titled "Modify trusted table entry". On this screen, if a user selects "View local System default",a bus error is displayed. JAGae44475) Upon entering the "Disk Devices", "File Systems" , "Logical Volumes", "Swap", or "Volume Groups" area from the "Disks and File systems" area, the following incorrect message is displayed while the area is being initialized: --------------------------------------------- Warning, using a maximum swap space of "0" can be risky. A maximum of zero allows the system to use all available space in the file system for swap space. This could result in the file system becoming full and unusable. ------------------------------------------------ The correct message that should be displayed is: ---------------------------------- Scanning the system's hardware... ---------------------------------- JAGae44485) On entering SAM -> Disks and File Systems -> File Systems subarea, choose VxFS Maintenance-> Upgrade VxFS from the "Actions" menu. The upgrade process from VxFS file system layout version 3 or earlier to version 4 does not work correctly. JAGae45106) On system boot, the following message is displayed due to a inittab failure: ---------------------------------------------- INIT: Command is respawning too rapidly. Will try again in 5 minutes. Check for possible errors. id:samd "/usr/sam/lbin/samd # system mgmt daemon" ---------------------------------------------- JAGae47367) In a scenario where there are more than 500 users in restricted SAM, when a user specifies a hyphenated user name in the "Select a User" text field (Load Privileges window), the following error message is displayed: ---------------------------------------------- The information entered in the Select a User: field is not valid. After exiting this message, press Help on Context (F1) for more information about the field's requirements. ---------------------------------------------- JAGae50036) Any local printer with a non-standard device file /dev/null is displayed as network printer by SAM. JAGae51077) When a third party tool, namely ISEE Platform, calls the SAM binary, /usr/sam/lbin/getkinfo, using the commands- /opt/hpservices/RemoteSupport/bin/RunMap -n MapContent. GeneralSystemInfo -a AdrX -pd PDdrX or /opt/hpservices/RemoteSupport/bin/RunMap -n MapContent.ComprehensiveSystemInfo -l -a AdrX -pd PDdrX, the logfile from the application returns the following error message to the logfile of the ISEE Platform. -------------------------------------------- THIS SCRIPT IS BEING RUN WITH USER ID (id -u) = 0 EXECUTING /usr/sam/lbin/getkinfo -b -o /var/opt/hpservices/tmp/872/getkinfo_b_o. sh.stdout.022633115707 WARNING: COMMAND /usr/sam/lbin/getkinfo -b -o /var/opt/hpservices/tmp/872/getkin fo_b_o.sh.stdout. 022633115707 RETURNED A NON-ZERO RETURNCODE: 139. CHECK THE STDERR SECTION OF THIS COMMANDS XML OUTPUT FOR FURTHER DETAILS. --------------------------------------------- JAGae52602) SAM does not recognize the following new hardware devices: HLDS GDR-8161B ATAPI DVD-ROM/CD-ROM Reader (Product#:A8068A) LITE-ON LTR-48126S ATAPI CD-RW DRIVE (Product #:A7853A) TEAC DW224E-B ATAPI DVD-ROM/CD-RW COMBO (slim) (Product #:A8070A) 10/100BT PCI Single Port card (Product #:A6974A) Fibre Channel Disk Array VA7110 (Product #:A6189B) CD-RW Drive (Product #:A7853A) HP Ultrium 460 External Drive (Product #:Q1509A) HP Storageworks SDLT 160/320 GB Tape Drive (Product #: 257319-B21) JAGae52903) On entering SAM->Networking and Communications -> Network Interface Cards subarea, select an IPv4 interface and choose "Configure/Modify" menu item from the Actions menu. A screen titled "Configure lan card" is displayed. On this screen, when a user specifies IP address, host aliases, comments and selects the OK button, SAM does not update the host details in the "/etc/hosts" file. JAGae55289) On entering SAM -> Performance Monitors -> System Properties subarea, the page size is displayed as zero in the Memory and Dynamic tabs. JAGae55293) After applying any SAM 11.11 patch, any template files that have been created under the Users and Groups subarea is truncated to zero bytes. JAGae55296) SAM does not display cron(1m) jobs starting with a '#' (comment character). SAM incorrectly displays cron(1m) jobs if the description field contains a '#' character. JAGae55744) For iSCSI targets, SAM -> Disk and File Systems -> Disk Devices subarea does not display the alternate paths correctly. PHCO_26382: JAGab31984) In SAM -> Performance Monitors -> System Properties subarea, SAM online help for virtual memory makes reference to "pseudo-swap" which is incorrect. JAGad54903) In SAM-->Networking and Communications -->DNS --> "Set Default Domain", the window is closed with the error, "You have both Domain and Search entries in your /etc/resolv.conf file. Only one is allowed at a time". SAM should not exit after the error message but should continue to function. JAGad67008) In SAM -> Kernel Configuration -> Configurable Parameters subarea, SAM online help shows incorrect maximum value for the kernel parameters, "nkthread" and "max_thread_proc". JAGad76934) In SAM (TUI mode) -> Kernel configuration --> Configurable Parameters subarea, select the parameter "num_tachyon_adapters". Select Help. Information on the kernel parameter is displayed but in the "See Also" section, an invalid link is displayed. JAGad82527) Context-sensitive help for "IPv6 address" and "prefix" fields in SAM is not available. JAGad82530) In SAM-->Network and Communications --> Network Interface Cards subarea, on selecting the "Configure" menu item in the "Action" menu, SAM takes a long time to autoconfigure the IPv6 interface ( after highlighting an IPv6 interface ) takes too long. JAGad83870) In SAM -> Kernel Configuration -> Configurable Parameters subarea, SAM online help shows incorrect default value for the "strmsgsz" kernel parameter. JAGad85934) Intrusive IPv6 related message in NIS, NIS+ and DHCP subareas of SAM. The message displayed is "SAM does not support V6 configuration" JAGad90126) In Network File Sytem--> Mounted Remote File system subarea, SAM displays the following error message if the "/etc/auto_master" file contains "Proto=tcp/udp" option for a remote file system. ------------------------------------------------ Error: "/usr/sam/lbin/autoopt: Problem parsing master automounter file "/etc/auto_master". ----------------------------------------------- JAGad95373) In SAM-->Networking and Communications--> Network Interface Cards-->Modify System Name subarea, the modified system name is not reflected in the files /etc/hosts and /var/adm/inetd.sec. JAGad99645) In SAM -> Kernel Configuration -> Configurable Parameters subarea, SAM Online help displays incorrect maximum value for the "maxusers" kernel parameter. JAGae03470) SAM disables IPv6 interfaces whenever IPv4 interfaces are configured. JAGae09404) SAM core dumps in SAM -> Kernel Configuration -> Configurable Parameters subarea, on a system which has been upgraded from 10.20 to 11.11 using the 'update-ux' tool. JAGae12800) The shell script 'get_sdm_info' which is used to obtain information about HP surestore disk array ,uses C style comments JAGae13332) In SAM -> Kernel Configuration -> Configurable Parameters subarea, SAM online help displays incorrect description for the minimum, maximum and default values of "maxdsiz", and "maxdsiz_64" kernel parameters JAGae13380) On a system with large number of processes, SAM fails to complete the replace operation for an OLAR-based network card, and core dumps. JAGae16035) A cron job containing "#" symbol is not displayed properly under SAM -> Process Management -> Scheduled Cron Jobs subarea. JAGae16430) a) When a large string is passed as command line argument to the "-K" option for "/usr/sam/lbin/rsam", "rsam" aborts with a memory fault. --------------------------------------------- $/usr/sam/lbin/rsam -K "`cat /etc/services`" Memory fault --------------------------------------------- b) Some SAM binaries contain embedded compile time library paths.(e.g.,/usr/sam/lbin/samx) JAGae18085) SAM should support configuration of multiple default gateways. JAGae18267) SAM gives error in the absence of .rhosts and hosts.equiv files on the system, in rlogin functional area. JAGae18336) Guardian Service Processor in now known as "Service Processor" on Partitionable systems. SAM has to be updated to reflect the change. JAGae18521) Whenever an IPv6 address is added to the /etc/hosts file, there should also be an option to configure its route. JAGae19343) In SAM -> Printers and Plotters ->LP Spooler -> Printers and Plotters subarea,if a user tries to remove a network printer, the following error message is displayed --------------------------------------------- Lp destination does not exist on ---------------------------------------------- JAGae19866) From SAM -> Auditing and Security -> Authenticated Commands, on entering any subarea , select Actions -> Modify menu item. In the "Modify an Authenticated Command" window, from the Add-on list,select a module whose "Auth Order" is "Not Used". Also,let the value of "Authentication Order" remain as "Not Used". Select the Modify button, and click on the OK button.The following error is displayed: --------------------------------------------- UNEXPECTED EXIT: process LANG=C LC_ALL=C /usr/sam/lbin/samx -C -p 21683 -s ts_pam_act_sa /usr/sam/lib//ts_pam.ui exited with a non-zero exit status. sh: 21775 Bus error(coredump) --------------------------------------------- JAGae21743) In SAM-->Network and Communications -->Network Interface Cards subarea, when a user modifies any of the attributes of a card (through modify menu item), SAM incorrectly updates the /etc/hosts file. JAGae21919) Under SAM ->Peripheral Devices ->Cards subarea, "Show/Create Device Files" action(s) fail for igelan,gelan cards. JAGae26582) In Time->NTP Broadcating subarea, when a user selects the "Modify" action item, SAM displays the following error message: "A sam INTERNAL ERROR has occurred! UILIB ERROR: ui_sel_item_name() returned UILIB_FIELD_NOT_FOUND Arguments were: field_name: "auth_key_nums" " JAGae28247) SAM needs to recognize the following new hardware devices: HLDS GDR-8160B ATAPI DVD-ROM/CD-ROM Reader (Product #A8068A) HLDS 40x CD-RW drive (ATAPI) HLDS 48x CD-Rom drive (ATAPI) A6828A:PCI Single Channel Ultra160 SCSI Adapter A6829A:PCI Dual Channel Ultra160 SCSI Adapter A6825A,A6847A,A6794A:PCI/PCI-X GigEther Cards. A7008A:10/100BT PCI Single Port card A7789A: Fire GL 2.8 Graphics Card. JAGae29049) SAM should be enhanced to support VxVM 3.5. JAGae29256) SAM does not restore the BSD printer attribute on restoring the print spooler configuration. PHCO_25870: JAGad04345) When removing a user/group, SAM invokes the "find" command with wrong options to remove the user file(s). This causes "find" to traverse all NFS file systems and the process takes a very long time to complete. JAGad82014) SAM-NNC should be enhanced to support configuration of Virtual LAN (VLAN) interfaces. JAGad85391) SAM dumps core when a user enters the Logical Volume (LV) dialog, or tries to obtain more information on an LV that has 120 (or more) EMC disks assigned to it.The error message displayed is as shown below: ------------------------------------------------ UNEXPECTED EXIT: process /usr/sam/lbin/samx -C -p 16090 -s fs_sa_vg /usr /sam/lib//fs.ui exited with a non-zero exit status ----------------------------------------------- JAGad88251) SAM is unable to define logical volume(s) while creating volume group on an FC-60 disk array in dual configuration mode. The error message displayed is as shown below: ----------------------------------------------- UNEXPECTED EXIT: process /usr/sam/lbin/samx -C -p 11748 -s fs_sa_vg /usr/sam/lib//fs.ui exited with a non-zero exit status sh: 12154 Abort(coredump) ----------------------------------------------- JAGad92425) When creating user accounts, SAM does not maintain the permissions of the files that are copied from the /etc/skel directory to the users' home directory. JAGad92432) SAM fails to trim the /etc/rc.log file. The error message displayed is as shown below: ------------------------------------------------ An error occurred after the trim while trying to save the remaining log information to the file "/etc/rc.logSAMTRM". You should examine this file to see if its contents are correct. ------------------------------------------------ JAGad96187) On a system with large number of unused disks with old serial numbers, SAM core dumps upon entering SAM -> Disks and File Systems Subarea. The error was detected on a customer system with a newly installed XP512 disk array (using 73 GByte disks) and a SEAGATE ST34573WC 4G HD. The error message displayed is as shown below: ------------------------------------------------ UNEXPECTED EXIT: process LANG=C LC_ALL=C /usr/ sam/lbin/samx -C -p 11721 -s fs_sa_vg /usr/sam/ lib/fs.ui exited with a non-zero exit status. sh: 11827 Memory fault (core dump) ------------------------------------------------ JAGae04863) On entering the SAM->Networking and Communications-> Network Interface Cards sub- area, and if a user tries to modify a logical interface, the Advanced Options screen is either blank or incomplete. JAGae05752) On selecting SAM -> Disks and File Systems -> File Systems ->Actions -> Run VxVM Storage Administrator, SAM exits from the file system section after logging the following message in samlog: ------------------------------------------------ The DA field name, "FS_VG_NAME", was not found in the SAM class registration database. Location: da_handle.C:957 Error Code: 1370 ------------------------------------------------ JAGae09717) SAM has to recognize the following new hardware devices: HP Surestore Virtual Array VA7405 (Product#:A6189B) HP Surestore Virtual Array VA7410 (Product #:A6218A) HP Surestore Disk System 2300 (Product #:A6491A) HP Surestore Disk System 2405 (Product #:A6255A) DVD-ROM Drive (slim) (Product #:A8069A) DVD-ROM/CD-RW Drive Combo (slim) (Product #:A8070A) DVD-ROM Drive (Product #:A8068A) CD-RW Drive (Product #: A7853A) The DVD-ROM/CD-RW Drive Combo (A8070A) and CD-RW Drive (A7853A) will be recognized as read-only devices. PHCO_24118: JAGad24679) In SAM->Time, if a user enters any of the sub-areas (NTP Broadcast, NTP Network Time Sources, or System Clock) and executes any of the actions items, the operation completes successfuly but a core dump occurs. JAGad88726) After a new disk has been initialised and added to a new disk group (not a pre-existing disk group) using the vxdiskadm user interface, SAM dumps core upon entering the Disks and FileSystems -> Disk Devices, Logical Volumes or Volume Groups sub-areas. JAGad91062) In SAM->Networking and Communications->Network Interface Cards sub-area, if a user wants to configure or modify an interface and assigns an IP address which is already in use, the warning message: "ifconfig: ipaddress already in use" is not displayed. JAGad91065) In SAM->Networking and Communications->Network Interface Cards sub-area, if the user configures a SNAP interface, the lan interface is not displayed. JAGad91777) In SAM->Networking and Communications->Network Interface Cards sub-area, while modifying an IPv4 interface in the Advanced Options screen, the IP Broadcast Address field is invisible. JAGad92839) In SAM->Networking and Communications->Network Interface Cards sub-area, while configuring or modifying an interface, changes made to the driver parameters for that interface are not updated until the system is re-booted. JAGad93389) In SAM->Networking and Communications->Network Interface Cards sub-area, the on-line help contains no information on IGELAN cards. JAGad93746) In SAM->Networking and Communications->Network Interface Cards sub-area, if user has opted to auto-configure an IPv6 interface, the user does not have an option to cancel auto-configuration. JAGad94227) In SAM->Networking and Communications->Network Interface Cards sub-area, if the user wants to configure an IP Logical Interface, upon configuring the interface, the following error is displayed: Error (hd0600) ERROR: lan 2 interface | PPA 2 : btlan3: ERROR: Setting 100000000 is unsupported Valid types: 10HD, 10FD, 100HD, 100FD, AUTO_ON Old Station Address = 0x00108327b5b5 New Station Address = 0x00108327b5b5 JAGad94344) In SAM->Networking and Communications->Network Interface Cards sub-area, when an IPv6 interface is deleted, the entry from the driver-specific configuration file is also deleted regardless of the IPv4 interface status and vice-versa. JAGad95592) In SAM->Networking and Communications->Network Interface Cards sub-area, whenever a SNAP interface is configured, an additional entry is added to the driver specific configuration file apart from the lan entry for that interface. JAGad95619) SAM does not support the configuration of the Next Generation Gigabit Ethernet Card (IGELAN). JAGad96980) In SAM->Networking and Communications->Network Interface Cards sub-area, while configuring or modifying Next Generation 1000-TX card, the values for the send max buffers, receive max buffers, send coal ticks, receive coal ticks driver variables are set incorrectly. JAGad97766) The new drivers gvid, gvid_core and igelan are not recognised by SAM. JAGad98158) The new driver func0 is not recognised by SAM. PHCO_23841: JAGaa61081) lpmgr limits the number of printers to 1024. JAGaa61090) If a user is removed from the system and has restricted SAM privileges, the privileges are not removed. If a new user is added with the same name, the new user may inadvertently receive the previous user's privileges. JAGaa61232) /var/sam/lock should not be world-writable. JAGaa93220) SAM limits size of AutoRaid LUNs to 99,999 MB. JAGab31980) When attempting to modify a network file system, the following error message is displayed: The command used to mount the new file system, mount(1m), has failed to mount /test. The stderr output from the command is show below. nfs mount: illegal file system specific option: nolargefiles usage: mount [-l][-v|-p] mount [-F FStype][-eQ] -a mount [-F FStype][-eQrV][-o specific_options] { special | directory } mount [-F FStype][-eQrV][-o specific_options] special directory JAGab77793) SAM -> Performance Monitors -> System Properties -> Networking In this screen, SAM should display information about the primary LAN card (the one mapped to the host's IP address). Instead, it may display information about another card. JAGad04236) SAM cannot recognize or configure ATM cards. JAGad33763) Upon entering the Networking and Communications ->Name Service Switch sub-area, the main screen displays garbage characters in the "Other" field. JAGad36111) If syscall auditing is enabled / disabled, it takes effect only while the auditing subsystem is up. But if auditing is stopped and restarted through /sbin/init.d/auditing (either manually, or from a reboot), these changes are lost. JAGad38555) SAM -> Networking and Communications -> Hosts -> NIS Hosts Map. It takes an excessively long time to enter the NIS Hosts Map display. JAGad41974) When you try to reactivate a user on an 11.11 NIS+ Trusted System, you receive the following error: ------------------------------- ERROR. There was an unknown error in "/usr/lbin/getprpw". The output from this command was: Unknown domain . :Not Found, no such name. Failed to read the protected password database for the user "username". ------------------------------- JAGad48366) There is a general problem when modifying a dynamic tunable which itself depends upon certain relationships with static tunables. For example, a change to a dynamic tunable sometimes can't be made because it depends on the value of a static tunable. This creates a situation that cannot be resolved within SAM. JAGad50640) When a disk array is connected through two interfaces, SAM does not recognise both of them during OLR (replace) operation and reports single point of failure. For example, if the disk array is connected through the A5158A FC card, during an OLR (replace) operation SAM reports single point of failure. JAGad51240) Some card-level SAM analysis is incorrect or incomplete for the PCI RAID 4Si card. Peripheral Devices -> Cards -> Actions -> Analyze Critical Resources This is the output for the above menu path: Critical Resource Analysis for slot 10: Warning: Affected resources are in use. Affected cards or ports: 0/3/0/1 : HP A5856A RAID 4Si Card 0/3/0/1.0 : I2O Block Storage ---------------- Analysis Details ---------------- No mass storage ports were evaluated. ---------------- No network ports were evaluated. ---------------- Warning: One or more of the affected ports has a class type that cannot be evaluated. Ports with class types that cannot be evaluated: 0/3/0/1 0/3/0/1.0 ---------------- JAGad53451) New PCI Ultra160 SCSI cards A6828A and A6829A are not supported by SAM. JAGad53667) The following models are not recognized in the SAM System Properties area: 9000/800/N4000-6X 9000/800/L1500-6x 9000/800/L3000-6x As a result, messages like the following are produced: ------------------------------- Model N4000-6X not found in the models database /usr/sam/lib/mo/sched.models or the file was missing. ------------------------------- and ------------------------------- Previous messages indicate that one or more errors occured in an attempt to retrieve mo_sv_proc_sg information. ------------------------------- JAGad54252) SAM -> Disk and Filesystems -> Swap. An attempt to add or remove file system swap produces the following message: ------------------------------- UNEXPECTED EXIT: process /usr/sam/lbin/samx -C -p 3411 fs_sa_swap /usr/sam/lib//fs.ui exited with a non-zero exit status. sh: 3959 Bus error(coredump) ------------------------------- JAGad54660) Networking and Communications -> Bootable Devices -> DHCP Device Groups Booting From this Server. SAM does not display the first pool group in the /etc/dhcptab file. JAGad54901) Networking and Communications -> Network File Systems -> Actions -> Disable NFS Server. The status of the NFS Server is not changed to "NFS Disabled". JAGad55753) Even after a user is reactivated in SAM, the Users & Groups Actions menu still displays the "Reactivate" menu item. JAGad56161) When the on-line help is requested in areas TIME and NFS, SAM gives an error: /usr/sam/help/C/nnc.hv file does not exist. JAGad62102) When trying to remove a user, if the pre-remove script fails, SAM still deletes the files belonging to that user. JAGad63742) On a system with VxVM installed, a user enters SAM's Disk and File Systems -> Disk Devices and SAM core dumps. JAGad63942) Upon entering SAM -> Peripheral Devices -> Uninterruptable Power Supplies produces the following message when no UPS is configured: ------------------------ UNEXPECTED EXIT: process /usr/sam/lbin/samx -C -p 8895 /usr/sam/lib//pd.ups.ui exited with a non-zero exit status. sh: 9378 Bus error(coredump) ------------------------ JAGad64120) SAM does not give a "Mount" action in the Disks and File Systems -> Disk Devices sub-area for a CD-ROM drive. JAGad66450) SAM -> Peripheral Devices -> Cards: In some cases, on L class machines, SAM responds with an error dialog "Scanning the System's Hardware Failed" for btlan, btlan3 and gelan cards. JAGad68820) Enable SAM-NNC to support IPV6. JAGad69240) When a system is not listed within SAM's /usr/sam/lib/mo/sched.models file, the following messages are produced: ------------------------------- Model C3600 not found in the models database /usr/sam/lib/mo/sched.models or the file was missing. ------------------------------- and ------------------------------- Previous messages indicate that one or more errors occured in an attempt to retrieve mo_sv_proc_sg information. ------------------------------- JAGad69244) SAM -> Backup and Recovery -> Interactive Backup and Recovery: If a tape drive is not listed in the pd_devinfo.tx file, the following message is displayed upon entry: ------------------------------- A SAM internal error has occurred: The error handler has gotten the error code 1 of type NOTE with the associated strings: 10/12/5.0.0 HP C1537A. ------------------------------- When a tape library is not listed within the /usr/sam/lib/C/pd_devinfo.tx file, it is incorrectly identified as a MOAC (magneto-optical autochanger) by SAM. JAGad69376) The new PCI Tachyon XL2 FC Adapter A6826A is not supported in SAM. JAGad69400) SAM does not allow the user to configure the UPS shutdown delay and timeout to values greater than 15 minutes. JAGad70436) Upon entering the Networking and Communications -> NIS+ -> Actions menu, the "Change Domain" item is not visible. JAGad71058) SAM cannot decrease the value of some kernel parameters which are dynamic in nature only when their values are decreased. For example, if the value of semmsl is decreased, SAM returns the following message: ---------------------------------------- The attempt to set parameter "semmsl" to value/formula "2050" has failed. The stderr output from the kmtune command is shown below: kmtune: Unable to change semmsl. Out of range. ---------------------------------------- JAGad71372) IPV6 support: The main screen of the Name Service Switch area in SAM displays this error: ---------------- ui_switch_group() returned UILIB_FIELD_NOT_FOUND ---------------- JAGad71571) After configuring an interface, SAM displays the following error on exit: ---------------- NNC_ROUTE_GETBYDESTV6 could not be found. ---------------- JAGad73881) If PHCO_23004 is installed and an executable named "id" exists in the path (specified by $PATH) before /usr/bin, then the following message is displayed on entering SAM: ------------------------------------ Restricted SAM cannot be run as root. ------------------------------------ JAGad76443) When adding a logical volume with striping, SAM does not allow a stripe size greater than 64KB, but the maximum size supported is 32768KB. SAM presented the following choices: 4,8,16,32,64 (sizes in KB for stripe size). JAGad77174) While accessing an Optimus (A5277A) array using SAM, the temporary files created (by SAM) in /var/sam are not removed. JAGad78532) SAM failed to add a host name alias to the /etc/hosts file for all the IPV6 gelan interfaces. JAGad78713) Incorrect interface status and internet address are displayed after "Delete" operation in SAM. JAGad79129) Modifying an IPv6 interface with an incorrect prefix disables the interface. JAGad80828) SAM has an option to upgrade a VxFS filesystem from version 2 to version 3, but there is no option to upgrade from version 3 to version 4 if version 3.3 is installed. JAGad80940) An entry in the /etc/hosts file separated by tab cannot be removed by SAM. JAGad81209) New PCI/PCI-X GigEther cards A6847A, A6825A, and A6794A are not supported by SAM. JAGad82199) If a printer has been configured as a login terminal, then on entering the Printers and Plotters ->LP Spooler -> Printers and Plotters sub-area, the following message is displayed: ----------------------------------- "Unexpected error with data, no printers found". ----------------------------------- JAGad82215) An attempt to use SAM to add a non-existent remote printer fails and the following message is logged to the samlog file: ------------------------------ 'lpmgr done, exit value is 5'. ------------------------------ JAGad82384) SAM displays the following error message when the Advanced option is used in configuring a card. ----------------------------------------------- A sam INTERNAL ERROR has occurred! UILIB ERROR: ui_invisible() returned UILIB_FIELD_NOT_FOUND Arguments were: field_name: "nnc_te_ibroad" ----------------------------------------------- JAGad82502) Whenever an IPV6 address is configured for an interface, an incorrect IPV4 address also gets configured. JAGad82511) For all non-ethernet devices an error message is not displayed when IPV6 support is not enabled for that device. JAGad82670) SAM mis-identifies the HP A6189A SureStore Virtual Array VA7400 as a VA7405. JAGad83198) Upon entering the Networking and Communications -> DNS -> DNS resolver sub-area, the screen display is incorrect if the /etc/resolv.conf file contains tabs. JAGad83399) The text message for OLA/OLR is unclear and hard to read. The 2 LED states in the OLR replace message are buried in the message text and could easily be missed by users scanning the message instead of reading it closely. JAGad84117) When entering Networking and Communications -> Networked File Systems -> Mounted Remote File Systems, the following message is displayed: UNEXPECTED EXIT: process LANG=C LC_ALL=C /usr/sam/lbin/samx -C -p 7590 -s nfs_client /usr/sam/lib//nfs.ui exited with a non-zero exit status. sh: 8424 Memory fault(coredump) JAGad85083) SAM allows only prefix 10 to be assigned for V6 secondary interfaces. JAGad85921) With IPV6 support in SAM, the System Clock area cannot be used to configure the date and time. JAGad87813) The on-line help for the VxFSUpgrade feature needs to be updated (refer to JAGad80828). JAGad88429) If SAM is used to configure DHCP, the configured DHCP groups are not visible in SAM. JAGad88837) Whenever a configured interface is assigned an IP address that is already in the use, the existing configuration of that interface is lost. JAGad89885) SAM displays incorrect time during first hour of the day. JAGad89898) On HP-UX 11.11 0601 OEUR and later, if the critical resource analysis is run from Partion Manager (parmgr), parmgr crashes with a stack corruption message. If SAM 11.11 LR version is installed, the task runs correctly from parmgr. In both cases, the task works correctly when run from within SAM rather than from parmgr. JAGad90894) SAM should support deletion of a disabled physical interface. JAGad91065) A network interface loses its address if a logical IP address is added to it through SAM. PHCO_23004: JAGad40450) The following processors are not recognized in the SAM System Properties area: L1500-7x L3000-7x A400-7X A400-8X A500-7X A500-8X N4000-7X N4000-8X N4000-9X As a result, messages like the following are produced: ------------------------------- Model L1500-7x not found in the models database. ------------------------------- and ------------------------------- Previous messages indicate that one or more errors occured in an attempt to retrieve mo_sv_proc_sg information. ------------------------------- JAGad38933) SAM does not recognize the HP C7145/C7146 Autochangers as tape devices. Instead, SAM incorrectly identifies them as Magneto-Optical disk autochangers on the list of available backup devices. JAGad38934) SAM does not recognize the HP Surestore SDLT 220 tape drive on the list of available backup devices. JAGad46771) SAM does not support the new HP A6188A (HP SureStore Virtual Array 7100) disk array. JAGad46036) The following processors are not recognized in the SAM System Properties area: L1500-8x C3750 J6750 B2600 As a result, messages like the following are produced: ------------------------------- Model L1500-8x not found in the models database. ------------------------------- and ------------------------------- Previous messages indicate that one or more errors occured in an attempt to retrieve mo_sv_proc_sg information. ------------------------------- JAGad45070) SAM -> Disks and File Systems -> Disk Devices/File Systems/Swap produces the following messages: ================================= UNEXPECTED EXIT: process LANG=C LC_ALL=C /usr/sam/lbin/samx -C -p 3265 -s fs_sa_disk /usr/sam/lib//fs.ui exited with a non-zero exit status. cpp: "/usr/sam/lib/C/pd.com.ui", line 71: error 4068: Missing comma seperator between parameters in macro "PD_ADD_TD". cpp: "/usr/sam/lib/C/fs_ice.h", line 152: error 4068: Missing comma seperator between parameters in macro "PB_TEXT". cpp: "/usr/sam/lib/C/fs_ice.h", line 166: error 4068: Missing comma seperator between parameters in macro "PB_TEXT2". sam: Error: The cpp(1) command failed on file: /usr/sam/lib/C/fs.ui. ================================= JAGad31048) On a system using single disk HFS, SAM offers to remove the LVM subsystem, but the attempt to rebuild the kernel without LVM fails with this output: ================================= Cannot build a kernel using /usr/sbin/config. The standard output of the command is shown below: /usr/ccs/bin/ld: Unsatisfied symbols: lvm_readahead_info (data) lvm_flush (data) lvm_shutdown (data) Stop. config: make did an exit(1) The command exitted with exitcode -71. ================================= JAGad44664) SAM does not properly identify Hitachi XP48 Array LUNs and does not subsequently collapse multiple hardware paths to the same LUN. This can cause alternate paths to these disks to be marked as "Unused", allowing for data corruption. JAGad40249) When a system contains a large number of physical volumes, SAM may generate the following message when a user enters the Disk Devices section of Disks and File Systems area: =============================== Unexpected exit process /usr/sam/lbin/samx -C -p 13589 -s fs_sa_disk /usr/sam/lib/fs.ui exited with a non-zero exit status. ================================== JAGad41974) SAM -> Accounts for Users and Groups -> SAM NIS+ Users -> -> Actions -> Modify Security Policies This results in corruption of the NIS+ table by omitting a trailing '.' on an entry in the table. JAGad41162) When multiple administrators concurrently perform user creation or modification using SAM, SAM may create users with the same UID without displaying a warning message. JAGad38331) When a SAM-configured PCI FDDI network card is physically replaced with a new PCI FDDI (or any other network card which is using the same I/O slot) and deleted with SAM, the replacement card erroneously assumes the MAC address of the old NIC. This may result in a non-functional network. JAGad48165) The following processors are not recognized in the SAM System Properties area: 9000/800/L1500-9x 9000/800/L3000-9x 9000/800/S16K-A 9000/800/N8K-A As a result, messages like the following are produced: ------------------------------- Model L1500-9x not found in the models database. ------------------------------- and ------------------------------- Previous messages indicate that one or more errors occured in an attempt to retrieve mo_sv_proc_sg information. ------------------------------- JAGad36145) The online addition and replacement dialog box that says: ------------------------------- The slot is powered down, Click "OK" when the card is replaced and the slot will be powered up. ------------------------------- is confusing and leads to operator errors. JAGad35304) The sequence of events required to replace a suspended I/O card is confusing. JAGad32172) Both physical and virtual ports show up in the Cards screen, but only physical ports are reported as being 'affected' by an OLAR operation in the Critical Resource Analysis screen or "Bring Card On-Line confirmation" screen. This could cause user confusion. JAGad50027) When a user that is not root and does not have Restricted SAM privileges tries to enter SAM, a confusing message is presented: ----------------------------------- The file "/var/sam/lock/lock_0" could not be opened (errno = 13, "Permission denied"). This file must be opened so this SAM session can be locked. Otherwise, other SAM sessions won't be able to detect that this SAM session is running on the system. ----------------------------------- JAGad28114) Both the PCI Standard Hotplug Controller (SHPC) spec and the Infiniband spec are proposing the use of a Blinking amber LED to locate a PCI slot for a hotplug operation. SAM currently turns on a solid amber LED for this purpose, which is an error indicator in the new standard. JAGad34991) SAM has obsoleted a number of files between 10.20 and 11.11. After an update from an older release to 11.11, some of the obsolete files are left on the file system. Defect Description: PHCO_30598: JAGaf32099) For an EVA disk array, SAM->Disks and FileSystems->Disk Devices functional area displays the alternate path to a disk as a separate LUN if the device identifier bytes returned by ioscan(1M) do not match. Resolution: For an EVA disk array, the alternate paths to a disk are correctly recognised even if the device identifier bytes do not match. PHCO_29327: JAGad98578) SAM is not updating the value for number of configured aliases correctly. As a result, a junk value is displayed. Since the value for the number of configured aliases is not correct, SAM fails to display the configured aliases. Resolution: SAM correctly updates the value for number of configured aliases. JAGae16057) While adding or removing a Dynamic Loadable Kernel Module (DLKM) to/from the kernel, the user can specify whether the DLKM can be added to the file /etc/loadmods as well. For the SNA modules, the user does not specify that DLKM must be added to the file /etc/loadmods but SAM adds the DLKM to the file /etc/loadmods before regenerating the kernel. Resolution: SAM has been modified to have the DLKMs added to or removed from the /etc/loadmods only if it is specified by the user in SAM's Kernel Configuration area. If the specification is not provided while adding a DLKM, then the update of /etc/loadmods is bypassed. JAGae26852) SAM does not check for a duplicate IPv4/IPv6 address before configuring the IP address. As a result, incorrect updates are made to the files /etc/hosts and /etc/rc.config.d/netconf or /etc/rc.config.d/netconf-ipv6. Resolution: SAM now checks for a duplicate IPv4/IPv6 address before configuring the IP address. SAM updates the files /etc/hosts, /etc/rc.config.d/netconf or /etc/rc.config.d/netconf-ipv6 only if the validation for duplicate IP address is successful. JAGae44626) On an NIS+ enabled system, SAM tries to access the NIS+ tables for carrying out NIS+ related initialization on entering any of the subareas under "Accounts for Users and Groups" functional area. When the NIS+ master server is not reachable, the initialization process results in errors as the NIS+ tables cannot be accessed. Resolution: On entering any of the subareas under "Accounts for Users and Groups" functional area of SAM (Local Users/Local Groups/NIS+ Users/NIS+ groups) on an NIS+ enabled system, if the NIS+ master server is not reachable, the following message is displayed: ---------------------------------------------- This system is defined to be an NIS+ client ("NISPLUS_CLIENT=1" was found in /etc/rc.config.d/namesvrs), but the NIS+ master server is not reachable. Should SAM continue treating this system as if it were NOT an NIS+ client? [ Yes ] [No] ---------------------------------------------- To proceed with administering the local users/ groups as in a BASIC system (Non NIS+), click Yes. To go back to the "Accounts for Users and Groups" screen, click No. JAGae48820) SAM checks autonegotiation and MTU values. In case of mismatch, SAM displays the error message. As SAM is storing incorrect values for the card type (gelan) and autonegotiation, SAM does not display the error message. Resolution: SAM has been modified to store the correct card type and autonegotiation value for gelan cards. JAGae52086) SAM stops processing NIS/NIS+ entries once it encounters an invalid entry. Resolution: SAM code has been modified to skip the invalid entry and continue processing the rest of the password table/map. JAGae52920) SAM fails with bus error when modifying DNS settings. Resolution: SAM code has been modified to set up DNS properly. JAGae54576) While adding a new NIS+ user, SAM adds the NIS+ user successfully to the password table, but fails to update the credentials. This scenario occurs if the credentials already exist for another user with same UID in the parent domain. SAM should first check if the credential exist in the current domain for the UID before modifying the password table. Resolution: SAM checks if the credential exist in the current domain for the UID before modifying the password table. If the credentials already exist for the specified UID, SAM will display a message asking the system administrator to enter another id or uncheck the "Create User Credentials" table. JAGae54919) In the SAM Kernel Configuration subarea, provide a valid template file, choose "Apply Template" and select the "Refresh" menu item from the "Options" menu. SAM displays an error message and the SAM GUI displays zeroes for current and pending values of all kernel parameters. Resolution: SAM code has been modified to load the template file correctly after selecting a valid template file in the Kernel Configuration area. Now, the "Refresh" menu item under the "Options" menu works correctly as expected. SAM retrieves default (not current) values and assigns the default values to the kernel parameters that are not specified in the applied template. SAM may fail to generate a new kernel if the applied template is for all dynamic kernel parameters. JAGae56856) When the logical volume is defined from the same user interface from where the volume group is being created ("Create New Volume Group" window followed by the "Define New Logical Volumes" window), the "Approx. Free Mbytes" field displays a value more than the actual space available on the selected disks. Resolution: When an attempt is made to create logical volume on the volume group that is yet to be created, a note will be displayed in the "Define New Logical Volumes" window that one or more logical volumes' creation may fail if all the space displayed in the "Approx. Free Mbytes" field is utilized. This note will be displayed from the following entry points to the "Create New Logical Volumes" screen - 1. Disk and File Systems -> Disk Devices -> Actions -> Configure -> Using the Logical Volume Manager -> A New Volume Group -> Define New Logical Volumes 2. Disk and File Systems -> Disk Devices -> Actions -> Configure -> Using the Logical Volume Manager -> An existing Volume Group -> Define New Logical Volumes 3. Disk and File Systems -> Volume Groups -> Actions-> Create. Enter a new volume group and select Define New Logical Volumes. JAGae60721) SAM calls the driver init script even when the driver parameters are not modified. Resolution: Now, SAM calls the driver init script only when the driver parameters are modified. JAGae61148) The online help and manpage (samlog_view.1) for samlog viewer displays the year of date in 2-digit format and must be modified to display valid 2-digit and 4-digit formats. Resolution: The samlog viewer manpage (samlog_view.1) and online help has been modified to display the correct date format. JAGae61160) samlog_viewer(1M) is not Y2K compliant. When samlog_viewer(1M) is invoked with year greater than 2037, SAM considers the year as 1970. Resolution: SAM code has been modified to support both 2-digit and 4-digit year formats. For 2-digit year input, the valid range is 70-99 (1900+) and 00-37 (2000+), and for the 4-digit year input, the valid range is defined as 1970-2037. JAGae61583) SAM online help displays wrong description of values (minimum, maximum and default). The values in SAM online help, and /usr/conf/master.d/core-hpux file mismatch. Resolution: SAM online help has been modified with correct minimum, maximum and default values of "maxdsiz" and "maxdsiz_64". JAGae67830) A temporary log file with name '0' (zero) is created in the root directory while upgrading from HP-UX 11.00 release to HP-UX 11.11 release. Resolution: The post install script has been modified so that a temporary log file with name '0' (zero) is no longer created in the root directory. JAGae70332) The ifconfig(1M) command is called even if none of the IP parameters are modified. Resolution: SAM has been modified to execute the ifconfig(1M) command only when the IP parameters are modified. JAGae72428) VLAN cannot be viewed or created via SAM because insufficient memory is allocated. Resolution: SAM has been modified to allocate sufficient memory to hold the interface name. JAGae74095) While analyzing critical resources for a card replacement, SAM creates the list of affected resources. While creating the list of affected file systems, SAM obtains the list of all file systems on the system by merging the information obtained from bdf(1M), entries in /etc/fstab and entries in /etc/mnttab. When a file system is removed internally by SAM, the entry from /etc/mnttab is removed by umount(1M)(internally called by SAM) and the entry from the /etc/fstab is removed by SAM as part of the file system removal procedure. However, when an explicit umount(1M) is executed on the file system in question from the command line, only the /etc/mnttab entry is removed whereas the /etc/fstab entry remains. Resolution: SAM has been modified so that the entries in the file /etc/fstab are not added to the list of affected devices if the file system is not mounted. JAGae74460) The Backup and Recovery service of SAM calls the binary /usr/sam/lbin/autoopt to read information about automounted file systems. Since the binary /usr/sam/lbin/autoopt dumps core, the "Interactive backup" functionality displays an error message. Resolution: /usr/sam/lbin/autoopt has been modified to resolve the core dump problem. JAGae75264) SAM does not check if the logical volume extended is a boot logical volume. On extending the boot logical volume from "SAM -> Disks and Filesystems -> Volume Groups" subarea, the boot information is lost. This means that the system will never boot at next reboot. Resolution: SAM has been modified to extend the boot logical volumes correctly. JAGae76847) SAM is not able to perform the power off operation on the OLAR-able slot for multi-port cards. Resolution: SAM has been modified to perform the power off operation on the OLAR-able slot for multi-port cards. JAGae77394) SAM does not check the start and end address before updating the /etc/dhcptab file. Resolution: Now, SAM checks the start and end address before updating the /etc/dhcptab file. JAGae78333) Under certain conditions, samlog_viewer(1M) may not operate properly. Resolution: SAM has now been modified to fix the problem. JAGae78372) On entering "SAM-> Networking and Communications -> Bootable Devices -> DHCP Device Groups Booting From this Server" subarea, select the desktops' DHCP Group Name that is listed, choose the Modify menu item and click the OK button. If the size of an entry in the file /etc/dhcptab is more than 4K (4096 bytes), SAM exits with a memory fault due to an error in the memory management routine. Resolution: SAM is modified to handle large /etc/dhcptab files upto 32768 bytes. JAGae80232) Under certain conditions, restricted SAM may not operate properly. Resolution: SAM has been modified to fix the problem. JAGae83077) SAM does not recognize the virtual array business copy (BC) LUNs. It has to mark the business copy LUN so that it is not considered as an unused disk. Resolution: SAM has been modified to recognize the virtual array BC LUNs and it marks the business copy LUN so that it is not considered as an unused disk. JAGae83345) In SAM, the following menu items are only applicable to SCSI Cascade Arrays and must not appear for Virtual Arrays: Modify Array Configuration Rebuild Data on Failed Disk Module... Fix Parity Inconsistencies... Resolution: The menu items are suppressed for Virtual Arrays. JAGae84199) The Storage Device Manager (SDM) array controller path that SAM builds for its internal use is displayed in the I/O cards subarea. This controller path is not a valid hardware path and is not visible through ioscan(1M). This gives an impression that SAM shows a non-existent device under the I/O cards subarea. Resolution: The SDM array controller will no longer be displayed under the I/O cards and Device List subarea. JAGae85656) When /usr/sam/lbin/ioparser.sh is used to list all interface "cards" on the system, the output of ioscan(1M) is searched for the string "INTERFACE". This causes the IPMI controller device to be listed under the class "cards" since ioscan(1M) lists IPMI controller as an INTERFACE. This is incorrect as the IPMI controller is not an interface "card" as such. Resolution: The IPMI controller device has been excluded from the search pattern used by /usr/sam/lbin/ioparser.sh to list the interface cards. JAGae86120) SAM collapses the FC60 LUNs if the LUNs report the worldwide identifier in Name Address Authority (NAA) IEEE registered extended format. The information displayed in the "SAM -> Disk Devices" screen does not match with the output of the command /opt/hparray/bin/amdsp -l . Resolution: Now, the FC60 LUNs having the NAA worldwide identifier are displayed in the SAM -> Disk Devices screen and matches with the output of the command /opt/hparray/bin/amdsp -l . SAM does not support multipath detection for disks returning World Wide Identifier in non globally unique formats such as Vendor Specific format. JAGae87868) If a system has a large number of users (usually more than 128) sharing the same UID, an attempt to remove any of them overflows a fixed size buffer and displays jumbled-up strings of user names. Resolution: Now, SAM allocates the buffer dynamically with adequate size. JAGae89490) On a system with Securepath software installed, "SAM -> Disk and FileSystems -> Disk Devices" subarea does not compute the number of paths for EVA HSV110 disk array correctly. Resolution: SAM code has been modified to compute the number of paths for EVA HSV110 disk array correctly. JAGae92769) After a card is suspended and replaced by a dissimilar card, SAM displays an error stating that the driver could not be resumed but the slot power is left in an ON state. As the slot power is ON and since the card is multifunctional, when ioscan(1M) is performed as part of the post-replace operations, the other ports in the card come up as CLAIMED. Resolution: The slot power is turned OFF when the card replacement fails. As the slot power is OFF, ioscan(1M) will not see the card during the post-replace operation and the card is not brought up. JAGae93146) On replacing a card with a dissimilar card, SAM correctly displays an error indicating that the drivers could not be resumed but leaves the slot power in the "on" state. Resolution: The slot power is turned OFF when there is an OLRAD failure to resume drivers. JAGae93152) When there is a bus frequency/mode mismatch on a shared slot, the slot power ON fails. In such a case, the general error message displayed by SAM on a power ON failure is not very useful to the user. Resolution: The error message displayed on a slot power ON failure is modified to indicate to the user that the failure could be due to bus frequency/mode mismatch on shared slots. JAGae98452) The information about FC60 LUNs shown in the SAM Disk Devices screen does not match with the output of /opt/hparray/bin/amdsp -l < serial number of the FC60 array> command. Resolution: The information about FC60 LUNs shown in the SAM Disk Devices screen matches with the output of /opt/hparray/bin/amdsp -l < FC60 disk array serial number> command. SAM does not support multipath detection for disks returning World Wide Identifier in non globally unique formats such as Vendor Specific format. JAGaf06223) On entering "SAM -> Networking and Communications -> Hosts -> Local Hosts File" subarea, SAM exits with a memory fault. The error occurs when /etc/hosts file is larger than 4096 bytes. Resolution: SAM is modified to handle large /etc/hosts files upto 32768 bytes. JAGaf07880) SAM does not check if the GID to be modified belongs to the special system group "no group". Resolution: SAM has been modified to disallow modification of the GID for a special system group "no group". JAGaf08764) When an IHV NIC card is installed on a system and SAM is invoked, SAM tries to get the details of the interface. As the configuration file of the IHV NIC card is not present on the system, SAM fails to get the details of the interface and exits without trying to get details of other interfaces. As a result, SAM does not correctly display all interfaces. Resolution: SAM has been modified to correctly display all the interfaces present on the system. JAGaf14390) Enter "SAM -> Disk and File systems -> File systems" subarea or "SAM -> Networking and Communications -> Network File systems -> Mounted Remote FileSystems" subareas. If the size of the autmounter map is larger than 4096 bytes, SAM exits with a memory fault. Resolution: SAM is modified to handle large automounter entries upto 32768 bytes. JAGaf14809) As the checking condition to find out the value of Flow control field for gelan, igelan and iether cards is incorrect, the Flow control value is wrongly displayed on the "Advanced Options" screen of gelan, igelan and iether cards. Resolution: SAM has been modified to correctly display the value of "Flow control" field for gelan, igelan and iether cards. JAGaf23910) SAM is retrieving the incorrect IP logical instance number. As a result, logical interfaces cannot be configured. Resolution: Now, SAM retrieves the correct IP logical number. As a result, logical interfaces can be configured. PHCO_28123: JAGae42959) SAM does not support the IETHER LAN card with MTU range 257-9000. Resolution: SAM code has been modified to support the IETHER LAN card with MTU range 257-9000. JAGae63466) SAM database has to be updated to include the new device data. Resolution: Entries for the new devices have been added to the SAM database. PHCO_27374: JAGad91701) In the absence of the file /etc/nsswitch.conf, SAM displays the error message on to the screen instead of silently logging the message. Resolution: If SAM finds that the file /etc/nssiwtch.conf is not present, then SAM logs this message in the log file but does not display it on to the screen. JAGad94311) SAM man page does not contain the following information: Certain applications like Software Distributor have their own security mechanism (swacl) and do not follow the restricted SAM security model. In such cases, the application launched through restricted SAM will be executed with the login id of the user who invokes it. Resolution: SAM man page has been updated to include information about Restricted SAM. JAGae12442) The variable used for storing the value of "Station Address" is not properly initialized and SAM ends up displaying garbled values for this field. Resolution: SAM code has been modified to display the correct value of "Station Address". JAGae18088) SAM needs to be enhanced to support configuration of FDDI interfaces with IPv6 addresses. Resolution: SAM now supports configuration of FDDI interfaces with IPv6 addresses. JAGae23125) SAM should perform an ioscan(1m) if the restricted user has access to functional areas other than "Account for Users and Groups" and "Auditing and Security". Resolution: SAM now performs an ioscan(1m) only if the restricted user has access to functional areas other than "Account for Users and Groups" and "Auditing and Security". JAGae24469) SAM should provide the system administration functionality for iSCSI device identification for static discovery, kernel build, and device recognition from ioscan(1m) output. Resolution: SAM now provides the system administration functionality for iSCSI. JAGae29286) To store internal information, SAM creates temporary files in the /var/tmp directory.SAM fails to remove these files later and thereby fills up the directory with temporary generated files. Resolution: SAM code has been modified to check whether the interface is configured and the temporary file is deleted. JAGae36062) For BTLAN flavor of cards, even if the status of the field "DUPLEX" is set to "HALF", SAM continues to display the status as "FULL". This is because SAM uses DLPI primitive to get the status of interfaces. If the "operational status" of the interface is down, DLPI primitive should not be used to retrieve the interface status. Resolution: Instead of using DLPI primitive, SAM now uses mib_status calls to retreive the status of an interface. This ensures that even if the "Operational Status" is down, SAM gets the correct value of the field "DUPLEX". JAGae36972) Since the -h option is not passed to the system command 'chown', the ownership of symbolic links is not getting changed along with other files,but the files pointed by symbolic links are getting modified. Resolution: 'chown' command is now supplied with the option -h. JAGae37625) SAM is not carrying out proper validations for DES credentials and thereby does not allow a user to add DES credentials for NIS+. Resolution: SAM code has been modified to validate the domainnames and add DES credentials for a user. JAGae41071) When SAM creates a home directory for a new NIS+ user, SAM uses the libc routines to get details (user id, group id and home directory) about the NIS+ user. In cases where the master server is busy, libc routines retrieve the user information from the replica server. If the NIS+ tables are not updated on the replica server then the specified user information is not available and the libc routines fail to provide the information. SAM consequently fails to create the new home directory. Resolution: SAM code has been modified to extract user information (user ID, group ID and home directory) from the user-entered information in the task dialog box without contacting the NIS+ server. JAGae41719) With BIND 8.1.2 version, the naming convention for name servers is changed to "Master/Slave" from "Primary/Secondary".SAM continues to look for the keywords "Primary/Secondary" instead of "Master/Slave" and hence does not recognize the presence of the /etc/named.conf file. Resolution: SAM code has been modified to change the label to master and slave nameservers. JAGae44447) SAM incorrectly assumes the order of password aging fields in the passwd table and hence displays incorrect values on the screen. Also, SAM does not read the "passwd table shadow column" field in the trusted table and as a result default values are always displayed. Resolution: SAM code has been modified to parse the passwd aging fields in the correct order. Also, SAM reads and writes the "passwd format policies" and "Login time of the day" fields as per the order in the trusted table. JAGae44448) SAM does not populate system default fields for trusted mode systems. As a result when SAM tries to read the fields, a "Bus error" is displayed. Resolution: SAM code has been modified to update the system default fields for the trusted mode systems. JAGae44475) Upon entering "Disk Devices", "File Systems", "Logical Volumes", "Swap", or "Volume Groups" subarea from the "Disks and File systems" functional area, an incorrect message is displayed while the functional area is being initialized. Resolution: SAM code has been modified to display the correct message. JAGae44485) Using SAM, upgrade process from VxFS version 3 or earlier to version 4 incorrectly upgrades to VxFS version 3. Resolution: SAM has been modified to restore back the broken functionality in PHCO_26382. SAM now successfully upgrades to VxFS file system layout version 4. JAGae45106) Some SAM binaries are linked with archive and shared libraries. This is causing inconsistency when newer version of shared libraries are installed. Resolution: SAM now uses shared libraries instead of archive libraries. JAGae47367) The validation mechanism for "Select a User" text field (Load Privileges window) in restricted SAM is not accepting hyphen (-) as a valid character. Resolution: Restricted SAM code has been modified to accept hyphen (-) as a valid character in the "Select a User" text field when specifying a user name in the Restricted SAM -> Load Privileges window. JAGae50036) SAM uses /usr/sam/lbin/lpmgr script to manage and retrieve printer configuration on the system. The lpmgr script recognizes any printer configured with device file /dev/null as network printer. Resolution: The lpmgr script in SAM has been modified to correctly recognize the printer(s) configured with non-standard device file. JAGae51077) ISEE Platform dynamically generates a script to invoke the getkinfo. The getkinfo in turn calls the samlog function inside SAM code where arrays with huge buffer sizes are defined. This causes illegal memory to be referenced and generates the signal SIGSEGV from the getkinfo. Resolution: The samlog functionality now uses dynamic memory allocation in place of fixed size arrays, this avoids the out of bounds memory references. JAGae52602) SAM database has to be updated to include the new device data. Resolution: Entries for the new devices have been added to the SAM database. JAGae52903) SAM does not update the "/etc/hosts" file if the IPv6 kit is not installed or if the address is not an IPv6 address. SAM does not take the IPv4 interface into consideration. Resolution: SAM code has been modified to call the task manager to update the "/etc/hosts" file for IPv4 interfaces as well. JAGae55289) SAM displays the page size as zero in the System Properties (Memory and Dynamic tabs) subarea. Resolution: SAM now displays the correct page size in the System Properties subarea. JAGae55293) The format of the Users and Groups template files have changed between 11.00 and 11.11. During an update from 11.00 to 11.11, SAM product configuration script makes use of a dump_convert utility to perform the conversion of the template format. The configure script for SAM patches also contain the dump_convert statements. However, the path for dump_convert utility is not provided in the patch configure script which causes the template files to be truncated to zero bytes. Resolution: The dump_convert statements have been removed from the SAM patch configure script. Now, the Users and Groups template information in SAM is not lost. JAGae55296) On entering SAM -> Process Management -> Scheduled Cron Jobs subarea, add a new cron(1m) job starting with a '#' character. SAM creates the job but does not display the information properly in the Scheduled Cron Jobs screen. Also, SAM does not parse the information properly if the description contains a '#' character. Resolution: The cron_read script in SAM has been modified to interpret the command and description properly. SAM now correctly displays cron(1m) jobs that start with a '#' character. SAM now correctly displays cron(1m) jobs even if the description contains a '#' character. JAGae55744) SAM was using device specific code for recognizing alternate paths. This logic does not work with iSCSI targets. Resolution: SAM has been modified to use the world wide unique device identification mechanism to identify the alternate paths. SAM now displays the alternate paths for iSCSI target properly. PHCO_26382: JAGab31984) The following text is available in SAM online help. ------------------------------------------------ Virtual Memory: Amount of virtual memory (also called pseudo-swap) in the system (as defined by pstat (see pstat(2)): Active: Virtual memory currently in use. Total: Total virtual memory in the system. ------------------------------------------------ The displayed data is that of virtual memory data, and is not specific to "pseudo-swap" as it is stated. The help screen is giving incorrect statement. The displayed data is the same regardless of "pseudo-swap" being enabled or disabled. Resolution: SAM online help has been modified to display the correct information about virtual memory. JAGad54903) Whenever the /etc/resolv.conf file has entries starting with "domain" as well as "search", the "Set Default Domain" action in SAM exits with error message. Resolution: SAM will display the error message and will also continue to accept user inputs. Once OK button is clicked, SAM will update the file /etc/resolv.conf appropriately. JAGad67008) SAM online help displays incorrect maximum value for kernel parameters, "nkthread" and "max_thread_proc". Resolution: SAM online help has been modified with correct maximum values for kernel parameters, "nkthread" and "max_thread_proc". JAGad76934) The "num_tachyon_adapters" and "max_fcp_reqs" tunables may be used to tune the default amount and type of memory allocated for supporting concurrent FC SCSI (FCP) requests. If you choose the invalid link in the online help of "num_tachyon_adapters", the following error message is displayed. ----------------------------------------------- "HP Help Hyper link type -8 is not supported on ASCII terminals." ----------------------------------------------- Resolution: SAM online help has been modified to remove the invalid link, and the link for "max_fcp_reqs" tunable is displayed. JAGad82527) Whenever the F1 key is pressed, on a given input field in SAM, SAM has to display the context-sensitive help for that field. SAM does not display the context-sensitive help for the two fields, "prefix" and "IPv6 address". Resolution: The context-sensitive help for "prefix" and "IPv6" address fields have been included in SAM. JAGad82530) SAM takes a long time ( more than a minute ) to auto configure IPv6 network interfaces. Auto configuration is a new feature available with IPv6 whereby network interfaces can be configured with system advertised IPv6 addresses. Resolution: SAM has been modified to return once auto configuration of the selected interface is complete. Earlier SAM used to wait to ensure that all the secondary interfaces too were auto configured, and hence there was a delay in the configuration. JAGad83870) SAM online help displays an incorrect default value of 8192 for the kernel parameter "strmsgsz", but /usr/conf/master.d/streams file displays "strmsgsz" with a default value of 0. Resolution: SAM online help has been modified to display the correct default value for the "strmsgsz" kernel parameter. JAGad85934) In the NIS+, NIS and DHCP subareas of SAM, the message "SAM does not support V6 configuration" is displayed after each and every activity. Resolution: SAM displays this message only once, when the user enters NIS+, NIS, and DHCP subareas for the first time. JAGad90126) SAM calls the binary "/usr/sam/lbin/autoopt" to parse the entries in the /etc/auto_master file. The grammer used by this binary does not accept "proto=tcp/udp" as a valid option and hence the error. Resolution: Code has been modified to accept proto=tcp/udp as a valid option for a remote file system. JAGad95373) Whenever system name is modified through SAM, SAM is not updating the affected files in the system. Hence the modified system name is not taking effect. Resolution: SAM has been modified to ensure that the system name is properly updated in all the relevant files namely /etc/hosts, /var/adm/inetd.sec, and /etc/rc.config.d/netconf. JAGad99645) SAM online help displays incorrect maximum value for the "maxusers" kernel parameter as Memory limited, while the correct maximum value is 4096. The values in SAM online help, and /usr/conf/master.d/core-hpux file mismatch. Resolution: SAM online help has been modified with the correct maximum value for the "maxusers" kernel parameter. JAGae03470) Whenever an IPv4 interface is configured or modified, the state of the corresponding IPv6 interface changes to "disabled" if the interface is not physically connected to the network. Resolution: SAM has been modified to display the status as given by "ifconfig" command so that the behaviour of GUI as well as command line commands are identical. Thus SAM ensures that the IPv6 interface does not fall onto "disabled" state inadvertently. JAGae09404) When 'update-ux' tool is used to upgrade from 10.20 to 11.11, vxfs related configuration files are not created.When SAM tries to resolve the vxfs parameter values, it is not able to lookup the corresponding files resulting in an assertion failure. Resolution: The assertion has been replaced by a condition check and a error message is displayed. JAGae12800) The shell script "get_sdm_info" which is used to obtain information about HP Surestore Disk array, uses C style comments. Resolution: Now the comment line conforms to the commenting style used in shell programming. JAGae13332) On invoking SAM online help for the kernel parameters "maxdsiz", and "maxdsiz_64", the online help displays wrong description of values (minimum, maximum and default). The values in SAM online help, and /usr/conf/master.d/core-hpux file mismatch. Resolution: SAM online help has been modified with the correct minimum, maximum and default values of "maxdsiz" and "maxdsiz_64". JAGae13380) SAM is using "pstat" system calls for obtaining information about the processes on the system. Any 32 bit application making use of the pstat system calls should be compiled with the "_PSTAT64" flag to work correctly on a 64 bit machine. SAM is not using the "_PSTAT64" flag during the compilation. Resolution: SAM is modified to define "_PSTAT64" flag during the compilation. JAGae16035) SAM uses the output of the command 'crontab -l' to get information related to the scheduled cron jobs. The output from 'crontab' is parsed by "/usr/sam/lbin/cron_read" script which assumes the prsence of the "#" symbol, to be the start of a comment field. If the command field in the 'crontab' output has a "#" embedded in it, then the command is displayed incorrectly. Resolution: The cron_read script has been modified to recognize a comment field only when the first character of a field is "#". JAGae16430) a) The buffer used by "rsam" for storing the argument passed to the "-K" option is limited, and hence results in buffer overflow. b) SAM executables should not contain embedded compile time library paths. Resolution: a) Now,"rsam" reads only a fixed amount of data passed on the command line to the "-K" option. b) Changes have been made to the makefiles to replace the embedded compile time library paths with run time library paths. JAGae18085) SAM needs to be enhanced to support add/modify/delete operations of default routes. Routes can be either IPv6 routes or IPv4 routes. Resolution: SAM has been enhanced to configure both IPv4 and IPv6 routes. SAM accepts details like destination address and the gateway address from the user, and configures the routing table entries in the system. SAM-->Networking and Communications-->Routes is a new subarea that has been introduced by which default routes can be configured. JAGae18267) In the absence of .rhosts and hosts.equiv files in the system, if SAM is invoked to configure rlogin details, SAM dumps core. Resolution: SAM presumed the presence of .rhosts or hosts.equiv files in the system. Code has been modified so that SAM would funtion even in the absence of these files. JAGae18336) Guardian Service Processor in now known as "Service Processor" on Partitionable systems. SAM has to be updated to reflect the change. Resolution: SAM database has been appropriately modified. JAGae18521) Whenever an entry is added to the file /etc/hosts, SAM asks whether a route needs to be added for the given address to the routing table of the system. This feature needs to be extended to IPv6 addresses too. Resolution: SAM has been enhanced to add routes to the routing table even for IPv6 addresses whenever such addresses are added to the /etc/hosts file through the Hosts subarea of SAM. As of now, adding routes alone is supported. Modifications and deletions of these routes are not yet supported through SAM. JAGae19343) In order to check for the existence of printers, a grep is done on the output of 'lpstat' command For network printers, SAM is passing wrong option to the 'lpstat' command which causes the grep to fail, and thus gives an incorrect error message. Resolution: The option passed to the 'lpstat' command is changed so that grep can select the printer name from the 'lpstat' command output. JAGae19866) The logic of incrementing or decrementing the existing "Auth Order" of modules does not take into account what action needs to be taken when the existing "Auth Order", and the user specified "Auth Order" of a selected module has the value "Not Used". In such a scenario, the existing Auth Order of the modules are getting incremented and causing a core dump. Resolution: A check is added to verify if both the existing "Auth Order", and the user specified "Auth Order" are same. If they are same, no action is performed on the authentication order. JAGae21743) When a user modifies any attribute of a network interface card, SAM incorrectly changes the host name in the file /etc/hosts to system name. Resolution: Following changes have been made to correct the behavior: - SAM reads the information from the file /etc/hosts and updates the /etc/hosts file. - SAM does not change the value of host name read from the /etc/hosts file. JAGae21919) Device file creation for gelan, igelan and gvid_core drivers is not supported from user applications like SAM. Resolution: The menuitems "Create/Show Device Files" will not be available for devices with gelan, igelan and gvid_core drivers. JAGae26582) SAM calls the OBAM API "ui_sel_item_name" to display the authentication key for selected client broadcast network. This API is called with incorrect field name. Resolution: Code has been modified to call the function with the correct field name. JAGae28247) SAM database has to be updated to include the new device data. Resolution: Entries for the new devices have been added to the SAM database. JAGae29049) From VxVM 3.5, a new GUI called Veritas Enterprise Administrator(VEA) will be available. SAM has to recognize the new gui path and should be able to launch the VEA. Resolution) SAM is now capable of recognizing and launching the VEA. JAGae29256) SAM uses lpstat command to find the printer attributes during the restore operation. The lpstat command does not report the BSD attribute for a printer. Thereby, SAM is unable to restore the BSD attribute. Resolution: Now, SAM stores the /var/spool/lp/pstatus file during the save operation and uses it during the restore operation to find whether the printer is configured as a BSD printer. Then, SAM appropriately restores the printer attribute. PHCO_25870: JAGad04345) SAM invokes the "find" command with the argument `! -fstype nfs'. This causes the NFS files to be rejected, but all NFS file systems still traversed.Thus, SAM takes a long time to complete the search for removing the user files. Resolution: Adding the `-only' option after '! -fstype nfs' now prohibits traversing the NFS file systems. JAGad82014) SAM-NNC was not supporting configuration of VLAN interface. Resolution: Code has been modified to support the configuration of VLAN interfaces. JAGad85391) SAM uses the 'awk' utility to process the LV information. Awk supports a buffer size of only 3000 characters. When 120 (or more) disks were configured in a single logical volume, the 'awk' buffer overflowed and caused SAM to dump core. Resolution: All printf statements that were processed by awk have been altered to accommodate the limit. JAGad88251) The code used for creating logical volumes in dual path configuration mode had memory leaks. Resolution: Code has been modified to ensure correct operation in dual path configuration while creating a volume group. JAGad92425) SAM used to set the file permissions to 0644 for all the files that were copied from the /etc/skel directory to the users' home directory. Resolution: SAM now retains the permissions of the files while copying them from the /etc/skel directory to the home directory using the `cp' command with `-p' option. JAGad92432) SAM could not trim the log files, as the TMPDIR environment variable was set. Resolution: The problem is now resolved by clearing the TMPDIR environment variable. JAGad96187) SAM uses a static buffer to hold information about unused disks. The size of the buffer was too small for a disk array with large number of unused disks. Resolution: This problem has been resolved by increasing the size of static buffer from 1024 to 10240 characters. If the list of unused disks becomes larger than the buffer size, the list gets truncated. JAGae04863) For a logical interface, the "Advanced Option" button was not intended to be displayed. Resolution: Code has now been modified such that the "Advanced Options" button is not displayed while modifying the logical interfaces. JAGae05752) SAM task manager was trying to access a field prior to its creation. Resolution: The code has been modified so that the task manager no longer attempts to access the field prior to its creation. JAGae09717) SAM database has to be updated to include the new device data. Resolution: Entries for the new devices have been added to the SAM database. PHCO_24118: JAGad24679) After the successful execution of the operations in the Time area, SAM was referencing illegal memory and dumping core. Resolution: SAM has been changed to take care of the illegal referencing of memory. JAGad88726) SAM uses the vginfo script to collect all disk-related information. The vginfo script was looking for VxVM disks with the status as "online" or "offline". It did not check for VxVM disk with the status "FS_wholedisk". Resolution: The vginfo script has been modified to also search for VxVM disks with the status "FS_wholedisk". JAGad91062) The task manager call that was used to configure the interface was executing two commands, first being ifconfig and next the post init script. In general, if the task manager executes two commands, the return value of the first command is superceeded by the return value of the second command. Thus the error message by the ifconfig command was masked and the expected warning message was not displayed. Resolution: By splitting the task manager to execute only one command in a task manager call, the error messages from ifconfig can now be trapped. JAGad91065) In general, the process of setting driver parameters was to unplumb the interface, set the parameters, and bring the interface back up with the ifconfig command. If the interface was a SNAP interface, it would unplumb the interface and then configure it, so the interface was not reconfigured and as a result the lan interface was lost. Resolution: The command "ifconfig unplumb" was removed from the task manager to avoid this side effect. JAGad91777) In SAM, the IP Broadcast Address field is applicable only for IPv4 interfaces, and this field should not be dispalyed for IPv6 interfaces. However, this field was not visible for IPv4 interfaces. Resolution: Now appropriate check has been added to display the IP Broadcast Address field for the IPv4 interfaces. JAGad92839) SAM depends on the task manager to set or configure the driver parameters or the IP address respectively. In the task manager, when a comment "#" was added in between the commands, the commands following the comment did not get executed because they too were treated as comments. Resolution: Now the comment has been removed from the task manager call and the driver script is called to set the driver parameters. JAGad93389) The IGELAN changes need to be included in the existing on-line help. Resolution: Changes have been made to the help text to include information about the IGELAN card. JAGad93746) When a IPv6 interface was to be configured, SAM would display information regarding the auto-configuration and this message box had only the "OK" button. Resolution: The message box has been replaced by a confirmation box which has the options, "OK" & "CANCEL". JAGad94227) laninfo is a SAM-NNC binary which is used to obtain the information of all the interfaces on the system. When executed with the "-i" option, it is used to obtain the IP instance number for the new logical interface to be configured. By design, this option can display the interface information of 20 interfaces. If the number of interfaces is more than 20, SAM does not display the information and an error message pops-up. Resolution: Now the maximum number of interfaces that can be handled by laninfo is calculated dynamically and thus the problem is solved. JAGad94344) On a dual-stack system, if either the IPv4 or the IPv6 interface is deleted then regardless of whether the other interface (i.e. IPv4 or IPv6) is configured the entry from the driver specific configuration file is deleted. Resolution: SAM has been modified to check whether another type of interface (i.e. IPv4 or IPv6) is configured. If not, the entry from the driver-specific configuration file is deleted. JAGad95592) When a SNAP interface is configured, SAM looks for an interface name of the form "SNAP" in the driver specific- configuration file. If not present, it adds another entry to the file with the interface as "SNAP". Resolution: SAM has been modified to update the existing lan entry in the driver-specific file if a SNAP interface is configured. JAGad95619) SAM should support Next Generation Gigabit Ethernet Card (IGELAN). Resolution: Changes have been made to the SAM code to support the IGELAN card. JAGad96980) While configuring an 1000-TX card, the value passed for the driver parameter AUTONEG is "". The init script of the igelan driver treats it as a space and takes the next value for the AUTONEG variable and thus the other variables after AUTONEG are obtaining wrong values. Resolution: The value for the AUTONEG variable is passed as "0" instead of "". JAGad97766) SAM did not have entries for the new gvid, gvid_core and igelan drivers in the /usr/sam/lib/kc/drivers.tx file. Resolution: Added the new driver entries. JAGad98158) SAM did not have an entry for the new func0 driver in the /usr/sam/lib/kc/drivers.tx file. Resolution: Added the new driver entry. PHCO_23841: JAGaa61081) This error is due to the limitation of the posix shell script array used by the lpmgr script to store printer information. These arrays are limited to 1024 elements each. Resolution: The lpmgr script was modified to eliminate the use of the posix shell script array to store the list of printers. It was also modified to improve performance. JAGaa93220) AutoRaid devices can contain over 400 GB, and SAM is limiting the possible LUN size by providing a text box that only accepted five digits. Resolution: Expanded the text box to allow six digits. This allows LUN sizes upto 999,999 MB. JAGab31980) When modifying a network file system, SAM was using the nolargefile option when executing the mount(1m) command, which is not applicable. Resolution: The nolargefile option is no longer used when mounting a network file system. JAGad04236) SAM was not displaying the ATM card details on the ATM screen in Networking and Communications Area. Resolution: SAM uses ioscan command output to find out the status of ATM cards. SAM was using the ioscan command incorrectly. By calling ioscan with the -k option, SAM is able to display available ATM cards onto the screen. JAGad33763) The arrays that were holding the data were not initialized and hence displayed the garbage characters. Resolution: By properly initializing the arrays which hold the variables used in the main screen, garbage characters are avoided. JAGad36111) The syntax of the /etc/rc.config.d/auditing configuration file used by the /sbin/init.d/auditing script did not support the new features. Resolution: SAM modifies the /etc/rc.config.d/auditing configuration script to support the new features. For the new features to be enabled, the auditing commands also need to support the syntax. See the "Other Dependencies" field below. JAGad38555) SAM uses a shell script to loop through and parse each entry in a NIS hosts table. Resolution: Using awk and sed commands to parse the NIS hosts table helped in reducing the delay. JAGad41974) You can't reactivate a user in SAM. It can be done from the command line, but that is not good enough. This problem occurs only if PHCO_23004 is installed. Resolution: SAM correctly reactivates a user without any error messages. JAGad48366) Setting maxfiles_lim to 20000 caused the kmtune error: out of range. When maxfiles_lim is set dynamically, the kernel ensures that it is lower than the current value of nfile (a static parameter). Resolution: SAM has been changed to keep track of static tunable changes, and if any exist, will treat the changes to dynamic tunables as if they were changes to static tunables: queueing them to become effective after rebuild/reboot of the kernel. JAGad50640) When a disk array is connected through multiple links, if one of the links is down the disk array is still accessible through the other links. But during OLR (replace) operation, the critical resource analysis code could not detect the alternate links. Resolution: Code has been implemented to rectify this. JAGad51240) Critical Resource Analysis in SAM indicates the port is of an unknown type, because SAM does not recognize the card as either a mass storage device or a network card. Resolution: SAM was enhanced to successfully determine the type of card in an I2O slot. JAGad53451) SAM did not have corresponding driver entry in the /usr/sam/lib/C/pd_devinfo.tx file to support the new PCI Ultra160 SCSI cards, because they are new products. Resolution: Added the new driver entry. The same driver is required for both the cards. JAGad53667) The models 9000/800/N4000-6X, 9000/800/L1500-6x and 9000/800/L3000-6x are new ones introduced after the release of 11.11. Resolution: Entries for these models have been added to SAM's sched.models file. See also the resolution for JAGad69240 below. JAGad54252) The error message is confusing even though the swap was created/removed successfully. Resolution: SAM was assuming some disk information would be available for use. SAM now checks for the disk information before trying to use it. JAGad54660) The parser implemented in SAM was reading the file from the second line assuming the first line would be empty. Resolution: The parser implementation has been modified to process all lines irrespective of where it begins. JAGad54901) Whenever the "Disable NFS Server" action item is chosen, the NFS daemon is killed. Sometimes all the daemons were not killed and hence SAM continued to display the status as "NFS Server Enabled". Resolution: Extra validations are put in place to ensure that all daemons are killed and the problem is resolved. JAGad55753) SAM was only calling the modprpw command once in order to reactivate a user. Under some circumstances, SAM must invoke modprpw twice to fully reactivate a user. Resolution: SAM now calls modprpw as needed to fully reactivate a user. JAGad56161) SAM was referencing the non-existing help file when on-line help was requested. Resolution: By ensuring that proper help files are referred, the problem is resolved. JAGad62102) This defect was caused by user files being removed before any pre-remove customized task was run. If the pre-remove task failed, the user was not removed, but the user's files had already been removed. Resolution: The logic has now been changed so that the pre-removed customized task is executed before any of the user's files are removed. JAGad63742) SAM was not parsing VxVM output properly and obtaining incorrect information. Resolution: Changes were made to SAM's vginfo script to parse the data correctly. JAGad63942) Sometimes SAM produces a bus error if no UPS is configured. This was due to a pointer variable responsible for the screen information not being initialized. Resolution: Initialized the pointer to NULL. JAGad64120) SAM identifies CD-ROMs as spindle disks because of an improper entry in the /usr/sam/lib/C/pd_devinof.tx file. Spindle disk devices are not mountable. Resolution: There was a catch-all entry in the pd_devinfo.tx file for sdisk which was identifying the device as a single spindle disk. Removed the entry in pd_devinfo.tx and placed the check for the driver back in the SAM source code after the CD-ROM recognition. JAGad66450) Drivers btlan/btlan3/gelan were missing from the ioparser.sh file. Resolution: Added btlan/btlan3/gelan drivers to the ioparser.sh file so I/O cards can access the driver. JAGad68820) SAM needs to support IPV6 features. Resolution: Using SAM, IPV6 addresses and features should be available for configuration if IPV6 stack exists in the system. JAGad69240) This is the result of identifying the CPU type using a static file. The identification process should be dynamic. Resolution: The CPU identification is now dynamic with the use of the sysconf(2) call. JAGad69244) SAM assumes that a generic device with the driver schgr or autox0 is a MOAC (magneto-optical autochanger). SAM was also displaying the internal error message for tape devices not explicitly listed in the pd_devinfo.tx file. Resolution: The method to recognize autochangers and tape devices is now dynamic based on the scsi device type. JAGad69376) SAM did not have the corresponding driver entry in the /usr/sam/lib/C/pd_devinfo.tx file to support the new PCI Tachyon XL2 Fibre Channel Adapter, as this is a new product. Resolution: The driver entry has been added for SAM to recognize these adapters. JAGad69400) New UPS products with a larger capacity were developed after 11.11 release. Resolution: SAM now lets the user configure the shutdown delay and timeout to a value up to 1092 minutes. JAGad70436) SAM could not recognize the presence of NIS+ tables available and assumed that there were no domains to change. Thus the "Change Domain" menu item was not highlighted. Resolution: SAM now recognizes them and so does not dim the "Change Domain" action item. JAGad71058) The semmsl parameter is dynamic, but only when increased. It must be statically changed if its value is lowered. SAM attempts to change it's value dynamically in all cases and fails. Resolution: semmsl is now recognized specifically and treated as a static parameter if the new value is less than the old. JAGad71372) IPV6 related variables were not properly initialized. Resolution: Proper initialization of the variables resolved this error. JAGad71571) SAM was invoking a wrong task manager. Resolution: Properly invoking the task manager resolved this issue. JAGad73881) PHCO_23004 introduced a defect with restricted SAM. Resolution: Added the explicit path to the SAM script. JAGad76443) SAM was not listing stripe sizes greater than 64KB for the user to select. Resolution: Enabled the ability to select a stripe size up to 32768KB. JAGad77174) In a system with an Optimus (A5277A) array connected, SAM was not removing temporary device files in /var/sam/ (prefixed with adf*). Resolution: Implemented code to remove temporary device files. JAGad78532) The check to verify whether host name aliases should be allowed or not was not proper and hence for gelan interfaces SAM disallowed adding alias names. Resolution: The validations have been modified and the problem resolved. JAGad78713) If an inteface is deleted which has IPV6 address configured, SAM displays the interface details incorrectly. Resolution: SAM wrongly interpreted the status of an interface as returned by the underlying dlpi and continued to display the old status of the interface even after the interface was deleted. Code is modified to properly parse the return value of dlpi and the status of interface is properly displayed. JAGad79129) If an interface which has IPV6 address is given an incorrect prefix, SAM accepts the value and disables the interface. Resolution: Depending on the type of IPV6 address, the prefix value has to be validated. Validations have been added for the prefix value depending on the IPV6 address type. JAGad80828) SAM should fully support and be consistent with JFS 3.3. The lack of this ability forces the user to use the command line to perform the task. Resolution: SAM now allows direct upgrade from current version to any higher version (less than or equal to the latest version). JAGad80940) If the /etc/hosts file has entries which are separated by tabs instead of spaces, SAM incorrectly parsed the entries. Resolution: SAM was considering space as default field separator and was not considering tab as the field separator. Code has been modified to consider both tab and space as field separators. JAGad81209) SAM did not have the corresponding driver in the /usr/sam/lib/C/pd_devinfo.tx file to support the new PCI/PCI-X GigEther cards because they are new products. Resolution: Added the new driver entry to support these products. JAGad82199) The output from lpstat was not handled previously. If a printer is created as a login terminal the LPMGR script will not work. Resolution: The LPMGR script has been modified to recognize printers created as login terminals. JAGad82215) LPSTAT does not always produce the same exit code if the does not exist. Resolution: The different return values from LPSTAT have been handled. JAGad82384) Whenever the Advanced Options screen is invoked for a card in SAM, an error message is displayed. Resolution: SAM was incorrectly invoking a function for the "Advanced Options" screen. A change to the function invocation resolved the issue. JAGad82502) With IPV6 support, an interface can have both IPV4 and IPV6 addresses assigned to it. As the variables were not properly initialized, V4 address was incorrectly displayed whenever V6 address was configured. Resolution: Proper initialization of variables resolved this issue. JAGad82511) IPV6 support is not enabled for FDDI and TOKEN RING interfaces. SAM does not display a message to this effect. Resolution: A check has been added to find out whether the interface belongs to FDDI or TOKEN RING and if so, IPV6 configuration is not supported and a message to this effect is displayed. JAGad82670) SAM pre-enabled the VA7400 with the VA7405 model number, but the model number was changed before the model was introduced. Resolution: Changed VA7405 to VA7400 for the A6189A. JAGad83198) If /etc/resolv.conf file has entries separated by tab space, SAM parses it incorrectly. Resolution: SAM was considering space as default field separator and was not considering tab as the field separator. Both tab and space are now recognized as field separators. JAGad83399) In the OLAR tool, the description of LED states is buried in the message text and hard to find. Resolution: Changes made to the text files that contain the wording for OLAR instructions. To improve readability, LED information is separated from the rest of the text. JAGad84117) SAM dumps core in 11.11 in nfs client. Resolution: Minor changes made to SAM temporary file creation. JAGad85083) SAM accepts only 10 as the value for prefix for secondary interfaces configured with IPV6. The Prefix can be any value between 0 and 128 for IPV6. Resolution: A Prefix value of 10 is only for Link local addresses. For secondary interfaces, global IPV6 addresses can be assigned and the prefix value can be any value between 0 and 128. A validation is now performed on the prefix value. JAGad85921) For IPV6, header files were modified and certain variables were omitted. These variables are needed for Time area to work. Resolution: The header files have now been modified. JAGad87813) JAGad80828 changed the way VxFS upgrade is done, requiring help changes. Resolution: Added help for new VxFS upgrade dialog. JAGad88429) The configured DHCP groups are available in /etc/dhcptab file and SAM was incorrectly parsing the file and hence could not display the values onto the screen. Resolution: The parser has been modified to read the /etc/dhcptab file properly. JAGad88837) Before configuring an interface, SAM first unplumbs the interface and then calls ifconfig to configure the new address, without checking whether any other interface has the new address already configured. Resolution: By avoiding the unplumbing, SAM can ensure that the interface does not lose its current configuration. JAGad89885) SAM displays the first hour of the day as 00:00 PM instead of AM. Resolution: The decision by SAM to display AM/PM was based upon whether the hour is greater than 12. The check should have been whether the hour is greater than or equal to 12. JAGad89898) SAM required a large stack size compared to parmgr. This requirement caused the problem when it was run from parmgr. SAM has a relatively large stack size compared to parmgr. Hence, the problem does not occur if the task is run from within SAM. Resolution: Instead of allocating large buffers on the stack, SAM now uses dynamically allocated memory. This removed the problem when SAM is invoked from parmgr. JAGad90894) If an interface is in a disabled or down state, SAM cannot be used to delete the interface. Resolution: Originally, "Delete" action item was enabled/highlighted only if the interface is in Enabled/Up state. Now code has been modified to support this action item irrespective of whether the interface is in Enabled/Up or Disabled/Down state. JAGad91065) Whenever a logical interface is added to any of the configured physical interface, the physical interface loses its configured address. Resolution: Before configuring an interface, SAM first unplumbs the interface and then calls ifconfig to configure the new address without checking whether any other interface has the new address already configured. By avoiding the unplumbing, SAM can ensure that the interface does not lose its current configuration. PHCO_23004: JAGad40450) These are new models introduced after 11.11. Resolution: Entries for these models have been made to SAM's sched.models file. JAGad38933) The C7145/C7146 Autochangers are new models introduced after 11.11. Resolution: Entries for these autochangers have been added to SAM's pd_devinfo.tx file. JAGad38934) The Surestore SDLT 220 is a new model introduced after 11.11. Resolution: An entry for this tape drive has been added to SAM's pd_devinfo.tx file. In addition, the new tape density that can be supported by this device has been added to SAM's tape_densities file. JAGaa61090) When removing a user, SAM was not removing the file containing the user's restricted-SAM privileges. Resolution: SAM now removes /etc/sam/custom/.cf when a user is removed. JAGab77793) In the System Properties area, the information being displayed was for the last card listed by the utility laninfo. This card may not be currently active when multiple cards are present. Resolution: SAM now gets the IP address with gethostbyname() and uses that information to match the output of laninfo to obtain the station address. JAGaa61232) SAM allows non-root changes in /var/sam/lock, which may affect SAM's behavior. Resolution: The directory mode has been changed to 755. JAGad46771) SAM did not support the A6188A disk array because it was introduced after 11.11. Resolution: SAM has been modified to support the A6188A. JAGad46036) These are new models introduced after 11.11. Resolution: Entries for these models have been added to SAM's sched.models file. JAGad45070) SAM was using cpp to expand a macro in which one argument included a space. Resolution: SAM has eliminated the use of spaces in cpp macro arguments. JAGad31048) At one time, LVM was an optional product and removable from the kernel. Now, however, it has become required, and so it is not possible to remove the drivers associated with LVM. Resolution: The option of removing the LVM subsystem from the kernel was removed from SAM. JAGad44664) SAM was not distinguishing between LUNs on Hitachi disk arrays. Resolution: SAM was modified with added support for Hitachi XP48 LUN detection and display of unidentified Hitachi LUNs. JAGad40249) The bounds of a static array in SAM were being exceeded. Resolution: The array size has been increased by a factor of four. JAGad41974) On NIS+ trusted systems, a non-dot directory was added to the NIS+ tables when you viewed "NIS+ Users" and when you modified the NIS+ security policies because SAM called getprpw, modprpw, and nss_getprpwnam with the "-n" option without a terminating "." on the domain name. Resolution: SAM now calls getprpw, modprpw, and nss_getprpwnam with a correctly-formatted domain. JAGad41162) SAM was not designed for concurrent use. In this case, it doesn't check that multiple sessions have not selected the same UID before assigning it to different users. Resolution: Before SAM assigns the UID, it now makes another check for uniqueness and allows the user to cancel the action if duplication is found. This does not completely eliminate the possbility of this problem recurring, but it reduces the likelihood. Concurrent use of SAM by more than one administrator is not supported and not recommended. JAGad38331) SAM's "delete" action for PCI FDDI cards doesn't remove the card's entries from /etc/rc.config.d/hpfddi4conf. Resolution: The "delete" action has been fixed so that the card's entries are removed from hpfddi4conf. JAGad48165) These are new models introduced after 11.11. Resolution: Entries for these models have been added to SAM's sched.models file. JAGad36145) There were two reasons for user confusion: 1) Some users were expecting to have to click "OK" in order for the slot to be powered down - they were therefore skimming the message and clicking OK too soon. 2) Others were reading carefully, but were confused by the fact that the main OLA/R window was not refreshed and still showed the card as powered on. Resolution: SAM was modified to update the cache for the affected slots, then refresh the screen before lighting the LEDs and displaying the instruction dialog. JAGad35304) If an IO card is in a suspended state (either due to canceling out of the OLAR screen or rad, or some other program putting the card in this state), the "Replace" action is inaccessible. The user is unsure whether to use the "Bring Online" action in order to enable the "Replace" action, or to go ahead and physically replace the card. Resolution: The help text was changed to explain the situation better. JAGad32172) The help text for the two affected screens was changed to explicitly indicate only physical cards are listed. JAGad50027) This is a result of the permissions of /var/sam/lock being changed to 755 to address the defect JAGaa61232. This change caused SAM to display the confusing message and exit before encountering the former, less confusing exit message. Resolution: An ID check has been added earlier in the SAM start-up process. If the user is neither root nor has restricted SAM privileges, the following message is displayed: ---------------------------------------- Sorry, you must have superuser (root) privilege to enter SAM. ---------------------------------------- JAGad28114) Both the PCI Standard Hotplug Controller (SHPC) spec have changed since the 11.11 version of SAM was released. Resolution: SAM has changed all occurrences of OLAR_IO_SET_ON_INDICATOR to OLAR_IO_SET_ATTENTION_INDICATOR and all messages and help text to say 'flashing' instead of 'on'. JAGad34991) The issue of removing obsolete SAM files was overlooked until late in the development of 11.11, and the initial list of obsolete files was incomplete. Resolution: The list of obsolete files in SAM's postinstall script was augmented with additional files. Enhancement: No (superseded patches contained enhancements) PHCO_27374: This patch delivers new functionality for iSCSI. PHCO_26382: This patch delivers new functionality for VxVM. SR: 8606171186 8606169658 8606169659 1653233411 8606107538 8606177539 8606176801 8606175830 8606161732 8606175423 8606170985 8606172714 8606171899 8606169053 8606178940 8606166858 8606166017 8606162855 8606180806 8606158625 8606158784 8606165700 8606135102 8606164464 8606166825 8606169279 8606172714 8606179142 8606181423 8606182024 8606184242 8606184470 8606185050 8606185467 8606185699 8606186549 8606186951 8606192772 8606192890 8606194534 8606194734 8606194914 8606197257 8606199634 8606200056 8606200060 8606200192 8606200216 8606201260 8606201884 8606202198 8606202397 8606207268 8606207996 8606209346 8606209527 8606209943 8606211640 8606211752 8606212021 8606213012 8606213028 8606213193 8606213310 8606213319 8606214007 8606214208 8606214534 8606215909 8606216752 8606218665 8606219279 8606219697 8606220749 8606220762 8606221760 8606221947 1653243410 8606222991 8606184460 8606213478 1653293571 5003440958 8606217484 8606204702 8606214925 8606155362 8606219586 8606221944 8606222664 8606223743 8606224294 8606224658 8606225138 8606225256 8606226525 8606226553 8606227923 8606228712 8606229104 8606135211 8606212826 8606216221 8606219103 8606223327 8606223335 8606227125 8606235722 8606236700 8606242467 5003457994 8606185701 8606197817 8606207757 8606213335 8606213338 8606214678 8606216766 8606220990 8606226303 8606230595 8606234250 8606242150 8606246355 8606246889 8606246937 8606249648 8606250048 8606253751 8606253935 8606254004 8606254189 8606255014 8606255549 8606257440 8606257616 8606262247 8606263921 8606264718 8606264925 8606222587 8606225222 8606245986 8606253754 8606258805 8606260147 8606264955 8606271882 8606272866 8606273537 8606276997 8606277649 8606280471 8606280472 8606280499 8606280509 8606281139 8606283420 8606286093 8606287138 8606288671 8606288972 8606291451 8606291455 8606291458 8606291981 8606278903 8606299998 8606249670 8606262517 8606280656 8606284878 8606288153 8606288989 8606290730 8606291076 8606293106 8606297206 8606297658 8606298082 8606304487 8606307299 8606309553 8606311240 8606311633 8606312448 8606314071 8606314630 8606315610 8606315649 8606317677 8606320595 8606320863 8606321731 8606323191 8606323655 8606325578 8606331649 8606332026 8606332032 8606337445 8606229526 8606297646 8606327229 8606345373 8606347056 8606347942 8606353596 8606354015 8606363248 8606371681 Patch Files: InternetSrvcs.INETSVCS-BOOT,fr=B.11.11, fa=HP-UX_B.11.11_32/64,v=HP: /usr/sbin/setup_bootp /usr/sbin/setup_tftp OS-Core.UX-CORE,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP: /usr/sbin/ch_exports /usr/sbin/ch_rc SystemAdmin.SAM,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP: /usr/newconfig/etc/sam/reg_da.db /usr/newconfig/etc/sam/reg_files.db /usr/newconfig/etc/sam/reg_tm.db /usr/sam/bin/chbootptab /usr/sam/bin/chdhcptab /usr/sam/bin/samlog_viewer /usr/sam/lbin/automgr /usr/sam/lbin/autoopt /usr/sam/lbin/backplane /usr/sam/lbin/br_backup /usr/sam/lbin/br_is_backup /usr/sam/lbin/br_recover /usr/sam/lbin/ch_hostip /usr/sam/lbin/ch_rhosts /usr/sam/lbin/ch_xntp /usr/sam/lbin/chuidacl /usr/sam/lbin/clrlockdcache /usr/sam/lbin/cron_change /usr/sam/lbin/cron_read /usr/sam/lbin/dareg /usr/sam/lbin/dg_bind /usr/sam/lbin/dg_chg_caching /usr/sam/lbin/dg_cont_info /usr/sam/lbin/dg_status /usr/sam/lbin/dg_unbind /usr/sam/lbin/dgscan /usr/sam/lbin/find_cdroms /usr/sam/lbin/fs_parse_lssf /usr/sam/lbin/fsutil /usr/sam/lbin/get_gr_mems /usr/sam/lbin/get_sdm_info /usr/sam/lbin/get_ttydevs /usr/sam/lbin/getkinfo /usr/sam/lbin/getmem /usr/sam/lbin/hdconfig /usr/sam/lbin/inittab /usr/sam/lbin/ioparser.sh /usr/sam/lbin/ipconn_load /usr/sam/lbin/iscsi_installed /usr/sam/lbin/iscsi_parser /usr/sam/lbin/kc_get_deps /usr/sam/lbin/kc_parse_range /usr/sam/lbin/laninfo /usr/sam/lbin/listchk /usr/sam/lbin/logstat /usr/sam/lbin/lp_rd_pstatus /usr/sam/lbin/lpmgr /usr/sam/lbin/mktsmpipe.sh /usr/sam/lbin/modauditrc /usr/sam/lbin/nl_lookup /usr/sam/lbin/nnc_utils /usr/sam/lbin/parse_nsswitch /usr/sam/lbin/pd_finddf.sh /usr/sam/lbin/pd_mkdf.sh /usr/sam/lbin/pd_ups_parse /usr/sam/lbin/pm_parse_ps /usr/sam/lbin/ra_getpasswd /usr/sam/lbin/remote /usr/sam/lbin/rsam /usr/sam/lbin/sam_nis_ismember /usr/sam/lbin/sam_niscat /usr/sam/lbin/sam_nisgrp /usr/sam/lbin/samd /usr/sam/lbin/samlog /usr/sam/lbin/samsec /usr/sam/lbin/samx /usr/sam/lbin/samy /usr/sam/lbin/sxpm /usr/sam/lbin/tmgrx /usr/sam/lbin/tmreg /usr/sam/lbin/ug_area_vis /usr/sam/lbin/upgrpfiles /usr/sam/lbin/upusrfiles /usr/sam/lbin/vginfo /usr/sam/lbin/vlaninfo /usr/sam/lbin/xntp_val_key /usr/sam/lib/C/arch.cat /usr/sam/lib/C/boot.ui /usr/sam/lib/C/br.ui.h /usr/sam/lib/C/chbootptab.cat /usr/sam/lib/C/dns.ui /usr/sam/lib/C/dps.ui /usr/sam/lib/C/dps_com.ui /usr/sam/lib/C/dps_help.ui /usr/sam/lib/C/dps_jobtsks.ui /usr/sam/lib/C/dps_lptsks.ui /usr/sam/lib/C/dps_modtsks.ui /usr/sam/lib/C/dps_pptsks.ui /usr/sam/lib/C/dps_pqtsks.ui /usr/sam/lib/C/dps_svrtsks.ui /usr/sam/lib/C/fal.h /usr/sam/lib/C/fal.ui /usr/sam/lib/C/fal_custom.ui /usr/sam/lib/C/fs.cat /usr/sam/lib/C/fs.ui /usr/sam/lib/C/fs_addlvm.ui /usr/sam/lib/C/fs_df_defs.h /usr/sam/lib/C/fs_dg.h /usr/sam/lib/C/fs_dg.ui /usr/sam/lib/C/fs_disk.h /usr/sam/lib/C/fs_ice.h /usr/sam/lib/C/fs_ice.ui /usr/sam/lib/C/fs_jfs.h /usr/sam/lib/C/fs_lfs.h /usr/sam/lib/C/fs_lv.h /usr/sam/lib/C/fs_mfs_sa.ui /usr/sam/lib/C/fs_op.ui /usr/sam/lib/C/fs_transformer.ui /usr/sam/lib/C/fs_vg.h /usr/sam/lib/C/hosts.ui /usr/sam/lib/C/iscsi.cat /usr/sam/lib/C/iscsi.ui /usr/sam/lib/C/kc.ui /usr/sam/lib/C/kcfe.ui /usr/sam/lib/C/lp.ui /usr/sam/lib/C/mo.cat /usr/sam/lib/C/mo.ui /usr/sam/lib/C/mo_msg_ui.h /usr/sam/lib/C/nfs_sa.ui /usr/sam/lib/C/nfs_td.ui /usr/sam/lib/C/nia.ui /usr/sam/lib/C/nisp.ui /usr/sam/lib/C/nnc_alias.ui /usr/sam/lib/C/nnc_setparm.h /usr/sam/lib/C/nnc_setparm.ui /usr/sam/lib/C/nsswitch.ui /usr/sam/lib/C/pd.cards.ui /usr/sam/lib/C/pd.cat /usr/sam/lib/C/pd.com.ui /usr/sam/lib/C/pd.h /usr/sam/lib/C/pd.insts.ui /usr/sam/lib/C/pd.syshw.ui /usr/sam/lib/C/pd.ups.ui /usr/sam/lib/C/pd_devinfo.tx /usr/sam/lib/C/pd_dfinfo.tx /usr/sam/lib/C/pd_ola_ins.tx /usr/sam/lib/C/pd_olr_ins.tx /usr/sam/lib/C/ra.ui /usr/sam/lib/C/route.ui /usr/sam/lib/C/sam.cb /usr/sam/lib/C/sam.ou /usr/sam/lib/C/sam.ui /usr/sam/lib/C/security.ui /usr/sam/lib/C/sysname_td.ui /usr/sam/lib/C/ts.ui /usr/sam/lib/C/ug.cat /usr/sam/lib/C/vlan.ui /usr/sam/lib/C/vlan_tasks.ui /usr/sam/lib/X11/app-defaults/Sam /usr/sam/lib/X11/app-defaults/ja_JP.SJIS/Sam /usr/sam/lib/X11/app-defaults/ja_JP.eucJP/Sam /usr/sam/lib/br/br.sl /usr/sam/lib/br/br.tm /usr/sam/lib/ct_adduser.ex /usr/sam/lib/ct_rmuser.ex /usr/sam/lib/dps/dps.sl /usr/sam/lib/dps/dps.tm /usr/sam/lib/fal/fal.sl /usr/sam/lib/fal/fal.tm /usr/sam/lib/fs/fs.sl /usr/sam/lib/fs/fs.tm /usr/sam/lib/fs/fs_com.sl /usr/sam/lib/iscsi/iscsi.sl /usr/sam/lib/iscsi/iscsi.tm /usr/sam/lib/kc/drivers.tx /usr/sam/lib/kc/kc.sl /usr/sam/lib/kc/kc.tm /usr/sam/lib/kc/kc_com.sl /usr/sam/lib/kc/params.tx /usr/sam/lib/kc/subsys.tx /usr/sam/lib/libcom.sl /usr/sam/lib/liblog.sl /usr/sam/lib/libsam.sl /usr/sam/lib/lp/lp.sl /usr/sam/lib/lp/lp.tm /usr/sam/lib/mo/mo.da /usr/sam/lib/mo/mo.sl /usr/sam/lib/mo/mo.tm /usr/sam/lib/mo/sched.models /usr/sam/lib/nnc/boot.sl /usr/sam/lib/nnc/nnc.da /usr/sam/lib/nnc/nnc.sl /usr/sam/lib/nnc/nnc.tm /usr/sam/lib/nnc/nnc_da_com.sl /usr/sam/lib/pd/pd.da /usr/sam/lib/pd/pd.sl /usr/sam/lib/pd/pd.tm /usr/sam/lib/pd/pd_comlib.sl /usr/sam/lib/pd/tape_densities /usr/sam/lib/pm/pm.sl /usr/sam/lib/pm/pm.tm /usr/sam/lib/ra/ra.sl /usr/sam/lib/ra/ra.tm /usr/sam/lib/rt/rt.sl /usr/sam/lib/rt/rt.tm /usr/sam/lib/sam/com.tm /usr/sam/lib/sam/sam.da /usr/sam/lib/sam/sam.mof /usr/sam/lib/sam/sam.tm /usr/sam/lib/tm/tm.tm /usr/sam/lib/tm/tm_comlib.sl /usr/sam/lib/ts/ts.sl /usr/sam/lib/ts/ts.tm /usr/sam/lib/ug/ug.sl /usr/sam/lib/ug/ug.tm /usr/sam/lib/ug/ug_comlib.sl /usr/sbin/sam SystemAdmin.SAM-ENG-A-MAN,fr=B.11.11,fa=HP-UX_B.11.11_32/64, v=HP: /usr/share/man/man1.Z/samlog_view.1 /usr/share/man/man1m.Z/sam.1m SystemAdmin.SAM-HELP,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP: /usr/sam/help/C/FALtd.LogViewerTimeRange.sdl /usr/sam/help/C/FSactions.FileSystems.sdl /usr/sam/help/C/FStd.VxFSupgrade.sdl /usr/sam/help/C/ISCSIactions.sdl /usr/sam/help/C/ISCSIole.sdl /usr/sam/help/C/ISCSItd.AddNewTarget.sdl /usr/sam/help/C/ISCSItut.sdl /usr/sam/help/C/KCole.ConfParams.sdl /usr/sam/help/C/KCparam.MaxDsiz.sdl /usr/sam/help/C/KCparam.MaxThreadsPerProcess.sdl /usr/sam/help/C/KCparam.MaxUsers.sdl /usr/sam/help/C/KCparam.NkernelThreadsMax.sdl /usr/sam/help/C/KCparam.NumTachyonAdapters.sdl /usr/sam/help/C/KCparam.StrMsgSz.sdl /usr/sam/help/C/PDactions.Cards.sdl /usr/sam/help/C/PDfal.IconHelp.sdl /usr/sam/help/C/PDole.Cards.sdl /usr/sam/help/C/PDtd.AddCard.sdl /usr/sam/help/C/PDtd.AnalyzeCriticalResources.sdl /usr/sam/help/C/PDtd.BringOnline.sdl /usr/sam/help/C/PDtd.InsertCard.sdl /usr/sam/help/C/PDtd.RemoveCard.sdl /usr/sam/help/C/PDtd.ReplaceCard.sdl /usr/sam/help/C/PERF_MONtd.SystemProperties.sdl /usr/sam/help/C/graphics/iscsi.l.pm /usr/sam/help/C/nnc/nnc.sdl /usr/sam/help/ja_JP.SJIS/FSactions.FileSystems.sdl /usr/sam/help/ja_JP.SJIS/FStd.VxFSupgrade.sdl /usr/sam/help/ja_JP.SJIS/PDtd.BringOnline.sdl /usr/sam/help/ja_JP.eucJP/FSactions.FileSystems.sdl /usr/sam/help/ja_JP.eucJP/FStd.VxFSupgrade.sdl what(1) Output: InternetSrvcs.INETSVCS-BOOT,fr=B.11.11, fa=HP-UX_B.11.11_32/64,v=HP: /usr/sbin/setup_bootp: $Revision: 73.2 $ SAM file editing library $Revision: 72.2 $ HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sbin/setup_tftp: $Revision: 73.2 $ SAM file editing library $Revision: 72.2 $ HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 OS-Core.UX-CORE,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP: /usr/sbin/ch_exports: $Revision: 73.1 $ issubdir.c 1.2 90/07/23 4.1NFSSRC Copyr 1990 Sun Mic ro /usr/sbin/ch_rc: $Revision: 72.14 $ SystemAdmin.SAM,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP: /usr/newconfig/etc/sam/reg_da.db: None /usr/newconfig/etc/sam/reg_files.db: $Header: /ClearCase/ftp/Feb-2002/samsrc1/src/fs/data /fs.tm,v 73.25.1.2 2002/02/12 13:16:33 shass a Exp $ $Header: pm.tm,v 73.1 97/12/30 12:11:24 hmgr Exp $ $Revision: 73.2 $ /usr/newconfig/etc/sam/reg_tm.db: None /usr/sam/bin/chbootptab: $Revision: 73.2 $ /usr/sam/bin/chdhcptab: $Revision: 73.1 $ /usr/sam/bin/samlog_viewer: samlog_viewer $Revision: 74.11 $ /usr/sam/lbin/automgr: None /usr/sam/lbin/autoopt: $Revision: 73.3 $ HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 SAM Infrastructure Version 2.0 - 01/13/98 23:06:37 SAM file editing library $Revision: 72.2 $ HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/backplane: $Header: backplane,v 72.2 94/07/08 17:25:32 hmgr Exp $ /usr/sam/lbin/br_backup: $Revision: 73.7 $ /usr/sam/lbin/br_is_backup: $Header: br_is_backup,v 72.4 96/10/18 12:24:44 hmgr Exp $ /usr/sam/lbin/br_recover: $Revision: 73.5 $ /usr/sam/lbin/ch_hostip: $Revision: 73.7 $ SAM file editing library $Revision: 72.2 $ HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/ch_rhosts: $Revision: 73.3 $ HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/ch_xntp: $Revision: 73.5 $ SAM file editing library $Revision: 72.2 $ HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/chuidacl: $Revision: 72.4 $ HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/clrlockdcache: clearlockdcache.c: $Revision: 73.3 $ $Date: 97/08/13 08:04:06 $ /usr/sam/lbin/cron_change: $Header: cron_change,v 72.9 96/10/18 12:25:24 hmgr E xp $ /usr/sam/lbin/cron_read: $Header: cron_read,v 73.1 97/12/30 12:11:29 hmgr Exp $ /usr/sam/lbin/dareg: dareg $Revision: 74.16 $ HP Distributed System Management Infrastructure Vers ion 3.0 built on date: 06/16/04 04:16:03 /usr/sam/lbin/dg_bind: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/dg_chg_caching: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/dg_cont_info: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/dg_status: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/dg_unbind: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/dgscan: $Header: dgscan,v 73.1 99/03/04 13:06:41 hmgr Exp $ /usr/sam/lbin/find_cdroms: $Header: find_cdroms,v 72.3 97/04/09 08:06:32 hmgr E xp $ /usr/sam/lbin/fs_parse_lssf: None /usr/sam/lbin/fsutil: None /usr/sam/lbin/get_gr_mems: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/get_sdm_info: None /usr/sam/lbin/get_ttydevs: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/getkinfo: SAM Kernel Discovery Tool: getkinfo $Revision: 73.4 $ HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/getmem: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/hdconfig: None /usr/sam/lbin/inittab: $Revision: 72.14 $ HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/ioparser.sh: $Header: ioparser.sh,v 73.27 2001/06/26 19:11:50 sut ton Exp $ /usr/sam/lbin/ipconn_load: SAM - NNC ipconn_load $Revision: 73.2 $ SAM file editing library $Revision: 72.2 $ HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/iscsi_installed: None /usr/sam/lbin/iscsi_parser: None /usr/sam/lbin/kc_get_deps: None /usr/sam/lbin/kc_parse_range: None /usr/sam/lbin/laninfo: $Revision: 73.23.1.1.2.2 $ HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/listchk: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/logstat: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/lp_rd_pstatus: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 $ Version_11.11 Jan 18 2002 16:39:53 $ /usr/sam/lbin/lpmgr: $Header: lpmgr,v 73.5 2001/08/06 18:17:51 fainmj Exp $ /usr/sam/lbin/mktsmpipe.sh: $Header: mktsmpipe.sh,v 72.3 94/07/08 17:26:00 hmgr Exp $ /usr/sam/lbin/modauditrc: $Revision: 72.8 $ /usr/sam/lbin/nl_lookup: nl_lookup $Revision: 74.2 $ /usr/sam/lbin/nnc_utils: None /usr/sam/lbin/parse_nsswitch: $Revision: 73.1 $ SAM file editing library $Revision: 72.2 $ HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/pd_finddf.sh: $Header: pd_finddf.sh,v 73.1 97/11/01 13:19:31 hmgr Exp $ /usr/sam/lbin/pd_mkdf.sh: $Header: pd_mkdf.sh,v 72.7 94/07/08 17:26:15 hmgr Ex p $ /usr/sam/lbin/pd_ups_parse: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/pm_parse_ps: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/ra_getpasswd: $Revision: 72.1 $ HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/remote: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/rsam: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/sam_nis_ismember: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/sam_niscat: None /usr/sam/lbin/sam_nisgrp: None /usr/sam/lbin/samd: None /usr/sam/lbin/samlog: samlog $Revision: 74.2 $ /usr/sam/lbin/samsec: None /usr/sam/lbin/samx: None /usr/sam/lbin/samy: None /usr/sam/lbin/sxpm: None /usr/sam/lbin/tmgrx: HP aC++ B3910B A.03.10 Standard Components Library tmgrx: $Revision: 74.8 $ $Date: 98/10/13 12:50:59 $ /usr/sam/lbin/tmreg: tmreg $Revision: 74.14 $ HP Distributed System Management Infrastructure Vers ion 3.0 built on date: 06/16/04 04:16:03 /usr/sam/lbin/ug_area_vis: ug_area_vis $Revision: 73.2 $ HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/upgrpfiles: $Revision: 73.2 $ HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/upusrfiles: $Revision: 73.4 $ HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/vginfo: None /usr/sam/lbin/vlaninfo: $Revision: 73.3 $ HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lbin/xntp_val_key: SAM file editing library $Revision: 72.2 $ HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lib/C/arch.cat: None /usr/sam/lib/C/boot.ui: None /usr/sam/lib/C/br.ui.h: $Header: br.ui.h,v 72.4 96/01/08 13:07:55 hmgr Exp $ /usr/sam/lib/C/chbootptab.cat: None /usr/sam/lib/C/dns.ui: None /usr/sam/lib/C/dps.ui: $Header: dps.ui,v 73.6 99/07/13 15:15:02 hmgr Exp $ */ /usr/sam/lib/C/dps_com.ui: $Header: dps_com.ui,v 73.6 2000/09/08 14:39:50 fainm j Exp $ */ /usr/sam/lib/C/dps_help.ui: $Header: dps_help.ui,v 73.4 99/09/08 15:01:52 hmgr E xp $ */ /usr/sam/lib/C/dps_jobtsks.ui: $Header: dps_jobtsks.ui,v 73.5 99/06/03 08:54:25 hmg r Exp $ /usr/sam/lib/C/dps_lptsks.ui: $Header: dps_lptsks.ui,v 73.4 99/01/08 13:54:19 hmgr Exp $ */ /usr/sam/lib/C/dps_modtsks.ui: $Header: dps_modtsks.ui,v 73.3 99/06/03 08:45:08 hmg r Exp $ */ /usr/sam/lib/C/dps_pptsks.ui: $Header: dps_pptsks.ui,v 73.5 99/06/03 08:47:41 hmgr Exp $ */ /usr/sam/lib/C/dps_pqtsks.ui: $Header: dps_pqtsks.ui,v 73.6 99/10/01 13:36:49 hmgr Exp $ */ /usr/sam/lib/C/dps_svrtsks.ui: $Header: dps_svrtsks.ui,v 73.3 99/01/08 11:56:22 hmg r Exp $ */ /usr/sam/lib/C/fal.h: None /usr/sam/lib/C/fal.ui: None /usr/sam/lib/C/fal_custom.ui: None /usr/sam/lib/C/fs.cat: None /usr/sam/lib/C/fs.ui: $Header: fs.ui,v 73.21 2001/02/05 22:55:18 kcarper E xp $ */ /usr/sam/lib/C/fs_addlvm.ui: $Header: /ClearCase/ftp/Feb-2002/samsrc1/src/fs/data /fs_addlvm.ui,v 73.8 2001/08/23 17:54:06 tko pren Exp $ */ /usr/sam/lib/C/fs_df_defs.h: $Header: fs_df_defs.h,v 73.5 99/07/22 11:32:06 hmgr Exp $ */ /usr/sam/lib/C/fs_dg.h: $Header: fs_dg.h,v 73.2 99/06/30 09:36:50 hmgr Exp $ /usr/sam/lib/C/fs_dg.ui: $Header: fs_dg.ui,v 73.4 98/09/09 13:22:47 hmgr Exp $ /usr/sam/lib/C/fs_disk.h: $Header: fs_disk.h,v 73.12 99/07/15 10:16:30 hmgr Ex p $ */ /usr/sam/lib/C/fs_ice.h: $Header: fs_ice.h,v 73.3 2001/01/16 17:25:21 tkopren Exp $ /usr/sam/lib/C/fs_ice.ui: $Header: fs_ice.ui,v 73.7 2001/08/07 19:49:32 tkopre n Exp $ /usr/sam/lib/C/fs_jfs.h: None /usr/sam/lib/C/fs_lfs.h: $Header: fs_lfs.h,v 73.4 98/09/09 13:22:34 hmgr Exp $ */ /usr/sam/lib/C/fs_lv.h: $Header: fs_lv.h,v 73.3 98/09/09 13:22:40 hmgr Exp $ */ /usr/sam/lib/C/fs_mfs_sa.ui: $Header: /ClearCase/ftp/Feb-2002/samsrc1/src/fs/data /fs_mfs_sa.ui,v 73.10 2001/09/06 03:35:25 js hah Exp $ */ /usr/sam/lib/C/fs_op.ui: $Header: fs_op.ui,v 73.31 2000/02/25 22:20:30 anncoo k Exp $ /usr/sam/lib/C/fs_transformer.ui: $Header: fs_transformer.ui,v 73.4 98/08/25 13:41:02 hmgr Exp $ /usr/sam/lib/C/fs_vg.h: $Header: fs_vg.h,v 73.6 99/07/22 11:37:09 hmgr Exp $ */ /usr/sam/lib/C/hosts.ui: None /usr/sam/lib/C/iscsi.cat: None /usr/sam/lib/C/iscsi.ui: None /usr/sam/lib/C/kc.ui: $Revision: 73.28 $ */ /usr/sam/lib/C/kcfe.ui: $Header: kcfe.ui,v 73.7 99/02/05 15:07:41 hmgr Exp $ */ /usr/sam/lib/C/lp.ui: $Header: lp.ui,v 73.6 99/06/03 13:51:26 hmgr Exp $ * / /usr/sam/lib/C/mo.cat: None /usr/sam/lib/C/mo.ui: None /usr/sam/lib/C/mo_msg_ui.h: None /usr/sam/lib/C/nfs_sa.ui: None /usr/sam/lib/C/nfs_td.ui: None /usr/sam/lib/C/nia.ui: None /usr/sam/lib/C/nisp.ui: None /usr/sam/lib/C/nnc_alias.ui: None /usr/sam/lib/C/nnc_setparm.h: $Header: nnc_setparm.h,v 72.1 95/02/16 15:34:28 hmgr Exp $ /usr/sam/lib/C/nnc_setparm.ui: $Header: nnc_setparm.ui,v 73.1 97/12/02 10:41:22 hmg r Exp $ /usr/sam/lib/C/nsswitch.ui: None /usr/sam/lib/C/pd.cards.ui: None /usr/sam/lib/C/pd.cat: None /usr/sam/lib/C/pd.com.ui: None /usr/sam/lib/C/pd.h: $Header: pd.h,v 73.8 2001/06/05 15:26:35 tkopren Exp $ /usr/sam/lib/C/pd.insts.ui: None /usr/sam/lib/C/pd.syshw.ui: None /usr/sam/lib/C/pd.ups.ui: None /usr/sam/lib/C/pd_devinfo.tx: None /usr/sam/lib/C/pd_dfinfo.tx: None /usr/sam/lib/C/pd_ola_ins.tx: None /usr/sam/lib/C/pd_olr_ins.tx: None /usr/sam/lib/C/ra.ui: None /usr/sam/lib/C/route.ui: None /usr/sam/lib/C/sam.cb: None /usr/sam/lib/C/sam.ou: None /usr/sam/lib/C/sam.ui: SAM 11.11 Patch PHCO_29327 - $Date: 2003-11-12 17:30 :35-07 $ - Tag PHCO_29327 */ /usr/sam/lib/C/security.ui: None /usr/sam/lib/C/sysname_td.ui: $Header: sysname_td.ui,v 72.9 96/10/25 16:03:48 hmgr Exp $ /usr/sam/lib/C/ts.ui: None /usr/sam/lib/C/ug.cat: None /usr/sam/lib/C/vlan.ui: None /usr/sam/lib/C/vlan_tasks.ui: None /usr/sam/lib/X11/app-defaults/Sam: None /usr/sam/lib/X11/app-defaults/ja_JP.SJIS/Sam: None /usr/sam/lib/X11/app-defaults/ja_JP.eucJP/Sam: None /usr/sam/lib/br/br.sl: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lib/br/br.tm: $Header: br_errors.h,v 72.3 94/05/17 15:24:13 hmgr E xp $ */ /usr/sam/lib/ct_adduser.ex: $Header: ct_adduser.ex,v 72.2 94/02/22 15:57:12 hmgr Exp $ /usr/sam/lib/ct_rmuser.ex: $Header: ct_rmuser.ex,v 72.3 95/10/06 16:05:23 hmgr Exp $ /usr/sam/lib/dps/dps.sl: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lib/dps/dps.tm: None /usr/sam/lib/fal/fal.sl: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lib/fal/fal.tm: $Header: fal_errmsg.h,v 73.2 2000/07/17 23:35:40 tko pren Exp $ */ $Header: fal_errors.h,v 72.11 95/04/10 18:18:08 hmgr Exp $ */ /usr/sam/lib/fs/fs.sl: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lib/fs/fs.tm: $Header: /ClearCase/ftp/Feb-2002/samsrc1/src/fs/h/fs _errors.h,v 73.36 2001/09/06 03:49:02 jshah Exp $ */ $Header: /ClearCase/ftp/Feb-2002/samsrc1/src/fs/data /fs.tm,v 73.25.1.2 2002/02/12 13:16:33 shass a Exp $ /usr/sam/lib/fs/fs_com.sl: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lib/iscsi/iscsi.sl: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lib/iscsi/iscsi.tm: None /usr/sam/lib/kc/drivers.tx: $Header: /ClearCase/ftp/Feb-2002/samsrc1/src/kc/data /drivers.tx,v 73.28 2001/12/04 08:35:48 jsha h Exp $ /usr/sam/lib/kc/kc.sl: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lib/kc/kc.tm: $Header: kc_errors.h,v 73.11 2000/05/25 15:58:44 gat es Exp $ */ $Header: kc_log.h,v 73.7 99/10/21 17:20:47 hmgr Exp $ */ /usr/sam/lib/kc/kc_com.sl: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lib/kc/params.tx: $Header: params.tx,v 73.46 2000/09/12 16:12:35 gates Exp $ /usr/sam/lib/kc/subsys.tx: $Header: subsys.tx,v 73.8 2001/02/06 19:48:46 gates Exp $ /usr/sam/lib/libcom.sl: SAM file editing library $Revision: 72.2 $ /usr/sam/lib/liblog.sl: None /usr/sam/lib/libsam.sl: Secure SAM $Revision: 74.5 $ built without SEC_BASE. /usr/sam/lib/lp/lp.sl: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lib/lp/lp.tm: $Header: lp_defs.h,v 73.4 2000/03/20 19:43:44 anncoo k Exp $ */ $Header: lp_err.h,v 73.1 97/10/17 11:25:55 hmgr Exp $ */ $Header: ar_errors.h,v 72.1 94/01/13 16:44:03 hmgr E xp $ */ /usr/sam/lib/mo/mo.da: $Header: mo.da,v 73.1 97/08/21 10:18:46 hmgr Exp $ * / /usr/sam/lib/mo/mo.sl: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lib/mo/mo.tm: $Header: mo_defs_tm.h,v 73.1 98/01/12 14:32:36 hmgr Exp $ */ $Header: mo_errs.h,v 73.5 2001/06/06 18:31:49 tkopre n Exp $ */ /usr/sam/lib/mo/sched.models: $Header: sched.models,v 73.22 2001/06/06 18:47:11 tk opren Exp $ */ /usr/sam/lib/nnc/boot.sl: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lib/nnc/nnc.da: None /usr/sam/lib/nnc/nnc.sl: SAM - NNC $Revision: 73.1 $ HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lib/nnc/nnc.tm: $Header: /ClearCase/ftp/Feb-2002/samsrc1/src/nnc/h/n nc_msgs.h,v 73.15.2.2 2001/11/29 07:11:22 sa miso Exp $ /usr/sam/lib/nnc/nnc_da_com.sl: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lib/pd/pd.da: None /usr/sam/lib/pd/pd.sl: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lib/pd/pd.tm: $Header: pd_err.h,v 73.5 2001/02/05 22:52:30 kcarper Exp $ */ $Header: ar_errors.h,v 72.1 94/01/13 16:44:03 hmgr E xp $ */ $Header: pd_retvals.h,v 73.1 2000/04/24 21:04:57 ole nder Exp $ */ $Header: pd_olar_retvals.h,v 73.3 2000/06/22 15:45:2 1 olender Exp $ */ /usr/sam/lib/pd/pd_comlib.sl: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lib/pd/tape_densities: None /usr/sam/lib/pm/pm.sl: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lib/pm/pm.tm: $Header: pm.tm,v 73.1 97/12/30 12:11:24 hmgr Exp $ /usr/sam/lib/ra/ra.sl: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lib/ra/ra.tm: $Header: ra_errmsg.h,v 72.12 94/10/07 15:59:31 hmgr Exp $ */ $Header: ra_errors.h,v 72.4 94/09/29 12:54:45 hmgr E xp $ */ /usr/sam/lib/rt/rt.sl: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lib/rt/rt.tm: None /usr/sam/lib/sam/com.tm: None /usr/sam/lib/sam/sam.da: $Header: sam.da,v 74.2 97/12/16 11:14:26 hmgr Exp $ */ /usr/sam/lib/sam/sam.mof: $Header: sam.mof,v 74.2 97/12/30 13:24:34 hmgr Exp $ */ /usr/sam/lib/sam/sam.tm: None /usr/sam/lib/tm/tm.tm: None /usr/sam/lib/tm/tm_comlib.sl: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lib/ts/ts.sl: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lib/ts/ts.tm: $Header: ts_err.h,v 72.27 96/11/04 14:13:56 hmgr Exp $ */ /usr/sam/lib/ug/ug.sl: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sam/lib/ug/ug.tm: $Header: ug_errmsg.h,v 73.8 2000/03/28 17:17:39 roma n Exp $ */ $Header: ug_errors.h,v 73.1 97/10/15 15:52:15 hmgr E xp $ */ /usr/sam/lib/ug/ug_comlib.sl: HP System Administration Manager Version 4.0 built on date: 04/26/02 15:38:25 /usr/sbin/sam: $Revision: 73.3 $ SystemAdmin.SAM-ENG-A-MAN,fr=B.11.11,fa=HP-UX_B.11.11_32/64, v=HP: /usr/share/man/man1.Z/samlog_view.1: None /usr/share/man/man1m.Z/sam.1m: None SystemAdmin.SAM-HELP,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP: /usr/sam/help/C/FALtd.LogViewerTimeRange.sdl: None /usr/sam/help/C/FSactions.FileSystems.sdl: None /usr/sam/help/C/FStd.VxFSupgrade.sdl: None /usr/sam/help/C/ISCSIactions.sdl: None /usr/sam/help/C/ISCSIole.sdl: None /usr/sam/help/C/ISCSItd.AddNewTarget.sdl: None /usr/sam/help/C/ISCSItut.sdl: None /usr/sam/help/C/KCole.ConfParams.sdl: None /usr/sam/help/C/KCparam.MaxDsiz.sdl: None /usr/sam/help/C/KCparam.MaxThreadsPerProcess.sdl: None /usr/sam/help/C/KCparam.MaxUsers.sdl: None /usr/sam/help/C/KCparam.NkernelThreadsMax.sdl: None /usr/sam/help/C/KCparam.NumTachyonAdapters.sdl: None /usr/sam/help/C/KCparam.StrMsgSz.sdl: None /usr/sam/help/C/PDactions.Cards.sdl: None /usr/sam/help/C/PDfal.IconHelp.sdl: None /usr/sam/help/C/PDole.Cards.sdl: None /usr/sam/help/C/PDtd.AddCard.sdl: None /usr/sam/help/C/PDtd.AnalyzeCriticalResources.sdl: None /usr/sam/help/C/PDtd.BringOnline.sdl: None /usr/sam/help/C/PDtd.InsertCard.sdl: None /usr/sam/help/C/PDtd.RemoveCard.sdl: None /usr/sam/help/C/PDtd.ReplaceCard.sdl: None /usr/sam/help/C/PERF_MONtd.SystemProperties.sdl: None /usr/sam/help/C/graphics/iscsi.l.pm: None /usr/sam/help/C/nnc/nnc.sdl: None /usr/sam/help/ja_JP.SJIS/FSactions.FileSystems.sdl: None /usr/sam/help/ja_JP.SJIS/FStd.VxFSupgrade.sdl: None /usr/sam/help/ja_JP.SJIS/PDtd.BringOnline.sdl: None /usr/sam/help/ja_JP.eucJP/FSactions.FileSystems.sdl: None /usr/sam/help/ja_JP.eucJP/FStd.VxFSupgrade.sdl: None cksum(1) Output: InternetSrvcs.INETSVCS-BOOT,fr=B.11.11, fa=HP-UX_B.11.11_32/64,v=HP: 985621203 36864 /usr/sbin/setup_bootp 1105336833 40960 /usr/sbin/setup_tftp OS-Core.UX-CORE,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP: 2251672076 45056 /usr/sbin/ch_exports 3905725209 20480 /usr/sbin/ch_rc SystemAdmin.SAM,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP: 3762546862 2682 /usr/newconfig/etc/sam/reg_da.db 359410512 5864 /usr/newconfig/etc/sam/reg_files.db 3932786668 33992 /usr/newconfig/etc/sam/reg_tm.db 3004727178 40960 /usr/sam/bin/chbootptab 2358883356 36864 /usr/sam/bin/chdhcptab 51800422 57344 /usr/sam/bin/samlog_viewer 1816301786 3608 /usr/sam/lbin/automgr 770466870 90112 /usr/sam/lbin/autoopt 2632090083 895 /usr/sam/lbin/backplane 2350455062 16174 /usr/sam/lbin/br_backup 2192028687 1410 /usr/sam/lbin/br_is_backup 4151138092 8499 /usr/sam/lbin/br_recover 803567399 61440 /usr/sam/lbin/ch_hostip 1473646615 28672 /usr/sam/lbin/ch_rhosts 3375529115 57344 /usr/sam/lbin/ch_xntp 1505527476 20480 /usr/sam/lbin/chuidacl 2694672411 16384 /usr/sam/lbin/clrlockdcache 1132274903 8902 /usr/sam/lbin/cron_change 3976924892 4667 /usr/sam/lbin/cron_read 2527726606 24576 /usr/sam/lbin/dareg 507273434 188416 /usr/sam/lbin/dg_bind 507273434 188416 /usr/sam/lbin/dg_chg_caching 507273434 188416 /usr/sam/lbin/dg_cont_info 507273434 188416 /usr/sam/lbin/dg_status 507273434 188416 /usr/sam/lbin/dg_unbind 353540851 12602 /usr/sam/lbin/dgscan 1789865021 4897 /usr/sam/lbin/find_cdroms 1052600311 3119 /usr/sam/lbin/fs_parse_lssf 3582838059 6618 /usr/sam/lbin/fsutil 3494021161 32768 /usr/sam/lbin/get_gr_mems 1187136123 4274 /usr/sam/lbin/get_sdm_info 2251706977 20480 /usr/sam/lbin/get_ttydevs 658281261 114688 /usr/sam/lbin/getkinfo 1692487167 16384 /usr/sam/lbin/getmem 3110736589 4364 /usr/sam/lbin/hdconfig 3150362676 20480 /usr/sam/lbin/inittab 2719647682 26814 /usr/sam/lbin/ioparser.sh 4037685030 24576 /usr/sam/lbin/ipconn_load 2468924141 1259 /usr/sam/lbin/iscsi_installed 3821828630 4140 /usr/sam/lbin/iscsi_parser 585981072 16384 /usr/sam/lbin/kc_get_deps 2269700708 16384 /usr/sam/lbin/kc_parse_range 2135381170 32768 /usr/sam/lbin/laninfo 2682287228 16384 /usr/sam/lbin/listchk 128675977 16384 /usr/sam/lbin/logstat 88886094 221184 /usr/sam/lbin/lp_rd_pstatus 2641729504 104713 /usr/sam/lbin/lpmgr 4160400681 1465 /usr/sam/lbin/mktsmpipe.sh 1610308586 23725 /usr/sam/lbin/modauditrc 949113505 16384 /usr/sam/lbin/nl_lookup 3726955046 49608 /usr/sam/lbin/nnc_utils 1060045087 24576 /usr/sam/lbin/parse_nsswitch 3724614351 3373 /usr/sam/lbin/pd_finddf.sh 3330521762 2190 /usr/sam/lbin/pd_mkdf.sh 240083625 24576 /usr/sam/lbin/pd_ups_parse 3228286541 20480 /usr/sam/lbin/pm_parse_ps 214533714 16384 /usr/sam/lbin/ra_getpasswd 2139368352 20480 /usr/sam/lbin/remote 1702505685 16384 /usr/sam/lbin/rsam 3757369494 16384 /usr/sam/lbin/sam_nis_ismember 2718628484 16384 /usr/sam/lbin/sam_niscat 1443444754 16384 /usr/sam/lbin/sam_nisgrp 579196303 32768 /usr/sam/lbin/samd 1991552979 16384 /usr/sam/lbin/samlog 820428787 20480 /usr/sam/lbin/samsec 4033577212 45056 /usr/sam/lbin/samx 2718768727 40960 /usr/sam/lbin/samy 936198903 45056 /usr/sam/lbin/sxpm 1101977311 57344 /usr/sam/lbin/tmgrx 803861610 49152 /usr/sam/lbin/tmreg 1460176123 24576 /usr/sam/lbin/ug_area_vis 2561362072 36864 /usr/sam/lbin/upgrpfiles 4262286791 36864 /usr/sam/lbin/upusrfiles 3084318623 21966 /usr/sam/lbin/vginfo 3013591958 28672 /usr/sam/lbin/vlaninfo 1587348970 24576 /usr/sam/lbin/xntp_val_key 3184296068 32826 /usr/sam/lib/C/arch.cat 1209606658 56734 /usr/sam/lib/C/boot.ui 1363500764 9202 /usr/sam/lib/C/br.ui.h 869179473 12 /usr/sam/lib/C/chbootptab.cat 3765203762 24085 /usr/sam/lib/C/dns.ui 2729633228 58402 /usr/sam/lib/C/dps.ui 1659934299 10368 /usr/sam/lib/C/dps_com.ui 2797920019 2733 /usr/sam/lib/C/dps_help.ui 672402412 3680 /usr/sam/lib/C/dps_jobtsks.ui 2476616154 18685 /usr/sam/lib/C/dps_lptsks.ui 3457785630 31189 /usr/sam/lib/C/dps_modtsks.ui 1091688669 33921 /usr/sam/lib/C/dps_pptsks.ui 453518960 13673 /usr/sam/lib/C/dps_pqtsks.ui 966525191 35951 /usr/sam/lib/C/dps_svrtsks.ui 4110562515 6347 /usr/sam/lib/C/fal.h 2759789370 18381 /usr/sam/lib/C/fal.ui 2394690014 25098 /usr/sam/lib/C/fal_custom.ui 4279848060 118967 /usr/sam/lib/C/fs.cat 2248128316 50993 /usr/sam/lib/C/fs.ui 3505726406 30280 /usr/sam/lib/C/fs_addlvm.ui 27476936 43836 /usr/sam/lib/C/fs_df_defs.h 2678206528 2126 /usr/sam/lib/C/fs_dg.h 2073118667 136335 /usr/sam/lib/C/fs_dg.ui 1516442886 29914 /usr/sam/lib/C/fs_disk.h 2708507857 11575 /usr/sam/lib/C/fs_ice.h 69401349 15176 /usr/sam/lib/C/fs_ice.ui 1619132083 5318 /usr/sam/lib/C/fs_jfs.h 495528029 5579 /usr/sam/lib/C/fs_lfs.h 1250721694 20715 /usr/sam/lib/C/fs_lv.h 151742086 12507 /usr/sam/lib/C/fs_mfs_sa.ui 2127349512 60159 /usr/sam/lib/C/fs_op.ui 950535661 24212 /usr/sam/lib/C/fs_transformer.ui 3887986962 40524 /usr/sam/lib/C/fs_vg.h 3090321027 33211 /usr/sam/lib/C/hosts.ui 1770910605 485 /usr/sam/lib/C/iscsi.cat 3690002193 6091 /usr/sam/lib/C/iscsi.ui 3947555380 53121 /usr/sam/lib/C/kc.ui 3675242068 6362 /usr/sam/lib/C/kcfe.ui 1890399675 47142 /usr/sam/lib/C/lp.ui 468495234 2034 /usr/sam/lib/C/mo.cat 1822884495 8919 /usr/sam/lib/C/mo.ui 524671430 2178 /usr/sam/lib/C/mo_msg_ui.h 2986883617 2893 /usr/sam/lib/C/nfs_sa.ui 1543409591 54023 /usr/sam/lib/C/nfs_td.ui 1926969785 86507 /usr/sam/lib/C/nia.ui 2577554866 178852 /usr/sam/lib/C/nisp.ui 3324298853 1864 /usr/sam/lib/C/nnc_alias.ui 280823388 562 /usr/sam/lib/C/nnc_setparm.h 2186939424 4528 /usr/sam/lib/C/nnc_setparm.ui 1674883957 17957 /usr/sam/lib/C/nsswitch.ui 1191190477 11821 /usr/sam/lib/C/pd.cards.ui 3279208100 39676 /usr/sam/lib/C/pd.cat 3309065440 9066 /usr/sam/lib/C/pd.com.ui 1966261152 10419 /usr/sam/lib/C/pd.h 3121562188 4335 /usr/sam/lib/C/pd.insts.ui 212539293 1767 /usr/sam/lib/C/pd.syshw.ui 290508265 8571 /usr/sam/lib/C/pd.ups.ui 2905362173 32817 /usr/sam/lib/C/pd_devinfo.tx 60703721 22981 /usr/sam/lib/C/pd_dfinfo.tx 865618049 719 /usr/sam/lib/C/pd_ola_ins.tx 1460127061 695 /usr/sam/lib/C/pd_olr_ins.tx 2152777696 3737 /usr/sam/lib/C/ra.ui 3040969515 5536 /usr/sam/lib/C/route.ui 665308324 24847 /usr/sam/lib/C/sam.cb 867562076 1219 /usr/sam/lib/C/sam.ou 3358059169 1061 /usr/sam/lib/C/sam.ui 4215228470 21154 /usr/sam/lib/C/security.ui 2513704466 2869 /usr/sam/lib/C/sysname_td.ui 1130981578 49383 /usr/sam/lib/C/ts.ui 3965889943 72271 /usr/sam/lib/C/ug.cat 2847878829 8547 /usr/sam/lib/C/vlan.ui 2228002168 18384 /usr/sam/lib/C/vlan_tasks.ui 883699018 13201 /usr/sam/lib/X11/app-defaults/Sam 936050502 38940 /usr/sam/lib/X11/app-defaults/ja_JP.SJIS/Sam 823260859 38940 /usr/sam/lib/X11/app-defaults/ja_JP.eucJP/ Sam 3315697604 131072 /usr/sam/lib/br/br.sl 2156425282 8718 /usr/sam/lib/br/br.tm 2888248786 1080 /usr/sam/lib/ct_adduser.ex 2478670418 989 /usr/sam/lib/ct_rmuser.ex 941755380 40960 /usr/sam/lib/dps/dps.sl 3129713310 17194 /usr/sam/lib/dps/dps.tm 2523233870 155648 /usr/sam/lib/fal/fal.sl 3231641786 19450 /usr/sam/lib/fal/fal.tm 2329551091 909312 /usr/sam/lib/fs/fs.sl 3831904887 188684 /usr/sam/lib/fs/fs.tm 146960465 417792 /usr/sam/lib/fs/fs_com.sl 2801643939 16384 /usr/sam/lib/iscsi/iscsi.sl 3128940454 5293 /usr/sam/lib/iscsi/iscsi.tm 1287832887 17122 /usr/sam/lib/kc/drivers.tx 1715035336 208896 /usr/sam/lib/kc/kc.sl 924312437 79775 /usr/sam/lib/kc/kc.tm 973631574 204800 /usr/sam/lib/kc/kc_com.sl 3156928254 19232 /usr/sam/lib/kc/params.tx 1902039134 869 /usr/sam/lib/kc/subsys.tx 2880697148 57344 /usr/sam/lib/libcom.sl 924941868 28672 /usr/sam/lib/liblog.sl 3354169161 495616 /usr/sam/lib/libsam.sl 1634092003 114688 /usr/sam/lib/lp/lp.sl 3189894803 50246 /usr/sam/lib/lp/lp.tm 89122233 3030 /usr/sam/lib/mo/mo.da 2767181016 40960 /usr/sam/lib/mo/mo.sl 4047493109 5884 /usr/sam/lib/mo/mo.tm 504984244 3111 /usr/sam/lib/mo/sched.models 414096630 94208 /usr/sam/lib/nnc/boot.sl 3978582080 24657 /usr/sam/lib/nnc/nnc.da 2757650568 1032192 /usr/sam/lib/nnc/nnc.sl 3623775808 471017 /usr/sam/lib/nnc/nnc.tm 4092175841 16384 /usr/sam/lib/nnc/nnc_da_com.sl 387087774 7851 /usr/sam/lib/pd/pd.da 1805716784 135168 /usr/sam/lib/pd/pd.sl 780036904 50804 /usr/sam/lib/pd/pd.tm 3306669381 192512 /usr/sam/lib/pd/pd_comlib.sl 2240212327 1805 /usr/sam/lib/pd/tape_densities 4237534165 49152 /usr/sam/lib/pm/pm.sl 2774165990 17171 /usr/sam/lib/pm/pm.tm 3803582615 28672 /usr/sam/lib/ra/ra.sl 3804171943 9789 /usr/sam/lib/ra/ra.tm 2025921691 61440 /usr/sam/lib/rt/rt.sl 1860042893 21655 /usr/sam/lib/rt/rt.tm 4265159206 30609 /usr/sam/lib/sam/com.tm 672101628 559 /usr/sam/lib/sam/sam.da 378752875 812 /usr/sam/lib/sam/sam.mof 4245646621 4631 /usr/sam/lib/sam/sam.tm 1441459212 15734 /usr/sam/lib/tm/tm.tm 1567623767 86016 /usr/sam/lib/tm/tm_comlib.sl 3563882992 192512 /usr/sam/lib/ts/ts.sl 3153066905 78027 /usr/sam/lib/ts/ts.tm 1899041920 614400 /usr/sam/lib/ug/ug.sl 2203867976 177339 /usr/sam/lib/ug/ug.tm 3554477263 94208 /usr/sam/lib/ug/ug_comlib.sl 1694995187 7032 /usr/sbin/sam SystemAdmin.SAM-ENG-A-MAN,fr=B.11.11,fa=HP-UX_B.11.11_32/64, v=HP: 302284722 4604 /usr/share/man/man1.Z/samlog_view.1 2639148224 9298 /usr/share/man/man1m.Z/sam.1m SystemAdmin.SAM-HELP,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP: 1876752332 8660 /usr/sam/help/C/FALtd.LogViewerTimeRange.sdl 4130541766 9384 /usr/sam/help/C/FSactions.FileSystems.sdl 1552733425 1651 /usr/sam/help/C/FStd.VxFSupgrade.sdl 2015021192 3120 /usr/sam/help/C/ISCSIactions.sdl 4134630546 4895 /usr/sam/help/C/ISCSIole.sdl 1535205770 4349 /usr/sam/help/C/ISCSItd.AddNewTarget.sdl 1937930279 3638 /usr/sam/help/C/ISCSItut.sdl 1328927030 9083 /usr/sam/help/C/KCole.ConfParams.sdl 3790634278 5529 /usr/sam/help/C/KCparam.MaxDsiz.sdl 731532801 4356 /usr/sam/help/C/ KCparam.MaxThreadsPerProcess.sdl 1082094855 4749 /usr/sam/help/C/KCparam.MaxUsers.sdl 1481611552 5131 /usr/sam/help/C/ KCparam.NkernelThreadsMax.sdl 835993766 4575 /usr/sam/help/C/ KCparam.NumTachyonAdapters.sdl 310665595 4000 /usr/sam/help/C/KCparam.StrMsgSz.sdl 4265986691 6965 /usr/sam/help/C/PDactions.Cards.sdl 2869491058 6856 /usr/sam/help/C/PDfal.IconHelp.sdl 2572112362 6257 /usr/sam/help/C/PDole.Cards.sdl 310757207 3908 /usr/sam/help/C/PDtd.AddCard.sdl 2118570314 3517 /usr/sam/help/C/ PDtd.AnalyzeCriticalResources.sdl 1025183623 5010 /usr/sam/help/C/PDtd.BringOnline.sdl 1976895425 1675 /usr/sam/help/C/PDtd.InsertCard.sdl 4170085990 2218 /usr/sam/help/C/PDtd.RemoveCard.sdl 1780813032 1676 /usr/sam/help/C/PDtd.ReplaceCard.sdl 2114212118 9647 /usr/sam/help/C/ PERF_MONtd.SystemProperties.sdl 259284411 7616 /usr/sam/help/C/graphics/iscsi.l.pm 36309729 984780 /usr/sam/help/C/nnc/nnc.sdl 2488889406 10158 /usr/sam/help/ja_JP.SJIS/ FSactions.FileSystems.sdl 194305437 1651 /usr/sam/help/ja_JP.SJIS/FStd.VxFSupgrade.sdl 3051019201 1078 /usr/sam/help/ja_JP.SJIS/ PDtd.BringOnline.sdl 2829867322 10147 /usr/sam/help/ja_JP.eucJP/ FSactions.FileSystems.sdl 3185553066 1662 /usr/sam/help/ja_JP.eucJP/ FStd.VxFSupgrade.sdl Patch Conflicts: None Patch Dependencies: None Hardware Dependencies: None Other Dependencies: This fix for JAGad36111 will not be complete until a future commands patch containing the fix for JAGad36006 is installed. The fix for JAGad36006 is scheduled for post-11.11 releases. The fix for JAGae09404 will not be complete until a future vxfs patch containing the fix for JAGae09602 is installed. Supersedes: PHCO_23004 PHCO_23841 PHCO_24118 PHCO_25870 PHCO_26382 PHCO_27374 PHCO_28123 PHCO_29327 Equivalent Patches: None Patch Package Size: 4690 KBytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHCO_30598 5. Run swinstall to install the patch: swinstall -x autoreboot=true -x patch_match_target=true \ -s /tmp/PHCO_30598.depot By default swinstall will archive the original software in /var/adm/sw/save/PHCO_30598. If you do not wish to retain a copy of the original software, include the patch_save_files option in the swinstall command above: -x patch_save_files=false WARNING: If patch_save_files is false when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. For future reference, the contents of the PHCO_30598.text file is available in the product readme: swlist -l product -a readme -d @ /tmp/PHCO_30598.depot To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHCO_30598.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: Be sure SAM is not running before installing this patch.