Patch Name: PHCO_28167 Patch Description: s700_800 11.11 HP Array Manager/60 cumulative patch Creation Date: 03/01/16 Post Date: 03/01/17 Hardware Platforms - OS Releases: s700: 11.11 s800: 11.11 Products: N/A Filesets: OS-Core.ARRAY-MGMT,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP OS-Core.ADMN-ENG-A-MAN,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP Automatic Reboot?: No Status: General Release Critical: No (superseded patches were critical) PHCO_23150: OTHER Patch provides critical functionality for use of HP Fibre Array/60 devices. Category Tags: defect_repair hardware_enablement enhancement general_release critical manual_dependencies Path Name: /hp-ux_patches/s700_800/11.X/PHCO_28167 Symptoms: PHCO_28167: 1. JAGae20771 - EMS improperly reports RCD 2. JAGae16454 - Bogus Mel logs logged by the AM60. PHCO_27576: 1. JAGae21470 - After OV SAM Allocator is activated, AM60 becomes highly unstable. PHCO_26824: 1. JAGae16461 - amcfg -R lun rebind fails at times with SCSI lock not granted error. 2. JAGae16452 - AM60 Core dumping due to MEL logging. 3. JAGad97475 - AM60Srvr will not start up, must delete the AM logs first. 4. JAGae11063 - Need warning added for -d option of amutil for FC60. 5. JAGad93361 - amdsp reports different aliases for the same array. PHCO_25311: 1. JAGad78428 - Only 8 digits of the disk serial number is displayed by amdsp. 2. JAGad83623 - LUN 0 can be removed with the -force option. 3. JAGad86506 - Lun rebuild frequency can be defined beyond 3.0 seconds in amutil. 4. JAGad87547 - Introduce date and IO path in amdsp -a output. 5. JAGad56960 - AM60Srvr dumps core when started with any other LANG option other than C. 6. JAGad86507 - Man page change for amutil to reflect change to rebuild frequency boundary value. 7. JAGad89595 - Introduce support for maxtor drives. 8. JAGad93369 - Added Incompatible FW download Warning message on completion of FW download through amdload. PHCO_23150: 1. JAGad45524 - FC60 controller may attempt back-end I/O during disk mech firmware download, resulting in Selection Timeout error. 2. JAGad45915 - Parity scan does not report error blocks. 3. JAGad49307 - amdload core dump after controller firmware download, while waiting for completion of reset, if timeout occurs while polling AM60Srvr for status. 4. JAGad49298 - amdsp core dump on fully loaded FC60 with misconfigured ID thumbwheels. 5. JAGad49309 - Downloading 4.X firmware or NVSRAM to passive controller may be problematic. Separate command sometimes required to restore controller to active mode. 6. JAGad49088 - swremove of HP Array Manager/60 patch causes /etc/rc.config.d/hparamgr file to be removed, preventing automatic restart of daemon on reboot. PHCO_22544: 1. JAGad04079 - AM60Srvr core dumps on parity scan of LUN with owning controller missing. 2. JAGab16618 - Improve logging in multi-initiator environments. 3. JAGab84551 - SCSI Device Lock Not Granted when attempting syswipe of array. 4. JAGac00096 - LUN recovery difficult. 5. JAGad08697 - AM60Srvr dies intermittently. 6. JAGad23891 - amdload command lock violation. 7. JAGab78599 - Implement Major Event Logging in AM60. 8. JAGac79027 - AM60Srvr exits with PendingQueue::Add buffer overflow. 9. JAGad26497 - LUN display shows drives as ?-? when numDisks is 0. 10. JAGad03253 - Download application firmware and bootware as one file. 11. JAGab82780 - amdsp command fails after LUN's owning controller is removed. 12. JAGad03254 - Add support for RAID 0 LUNs. 13. JAGad03945 - Add support for UTM LUN. 14. JAGad07307 - Handle new sense codes from HP07 firmware. 15. JAGad27589 - Handle SCSI disk firmware convergence in amdload. 16. JAGab15596 - Log files should not be able to grow so as to overflow a file system. 17. JAGac86825 - Disk firmware download problems on Seagate Cheetah III & IV mechs. 18. JAGad02941 - FRU device type 0x07 not always decoded correctly in amlog. 19. JAGad03204 - Enable software controller reset when allowed by firmware. 20. JAGad03821 - LUN number sometimes not initialized in drive group display. 21. JAGad10447 - New FRU group decoding required with HP07 controller firmware. 22. JAGad10909 - Man page updates required for IPR-0012 software. 23. JAGad23902 - Decode FRU info provided in raw MEL data. 24. JAGab78603 - Validate AM60 ANSI C++ compliance. 25. JAGad02940 - Add support for LUN state 83. 26. JAGad05381 - Report disk sense data on SMART events. 27. JAGad07400 - Slot ID in disk display has wrong data type. 28. JAGab75343 - Fix amlog memory leak. 29. JAGab75346 - Fix amdload memory leak. 30. JAGad16493 - amdsp -p -S on more than two links results in a device ID error. 31. JAGad29621 - amdsp -i reports AM60Srvr unavailable, but it is running. 32. JAGad35936 - Fix log clearing problem with HP03 and earlier firmware, introduced in PHCO_22196. 33. JAGad34226 - Change MEL drive slot from 1-based to 0-based, to match amdsp output. Problem was introduced in PHCO_22196. 34. JAGad36256 - Implement environment variable to allow option for more than 100 MB of log files. 35. JAGad36259 - Add non-redundancy warnings for RAID 0. 36. The amlog utility provided in this patch does not read the array log files generated by AM60Srvr from PHCO_21315 or earlier patches. To read old log files, use the archived version of amlog found in /var/adm/sw/ save//ARRAY-MGT/opt/hparray/bin/, where OLD_PATCH_NAME is PHCO_21315 or earlier. Defect Description: PHCO_28167: 1. Description: JAGae20771 - EMS improperly reports RCD. 2. Description: JAGae16454 - Bogus Mel logs logged by the AM60. PHCO_27576: 1. Description: JAGae21470 - After OV SAM Allocator is activated, AM60 becomes highly unstable. PHCO_26824: 1. Description: JAGae16461 - amcfg -R Lun rebind fails at times with SCSI lock not granted error. 2. Description: JAGae16452 - AM60 Core dump due to extra bytes in MEL log. 3. Description: JAGad97475 - AM60Srvr will not start up, must delete the AM logs first. 4. Description: JAGae11063 - Need warning added for -d option of amutil for FC60. 5. Description: JAGad93361 - amdsp -l reports different aliases. PHCO_25311: 1. Description: JAGad78428 - Only 8 digits of the disk serial number is diplayed by amdsp. 2. Description: JAGad83623 - LUN 0 can be removed with the -force option. 3. Description: JAGad86506 - Lun rebuild frequency can be defined beyond 3.0 seconds in amutil. 4. Description: JAGad87547 - Introduce date and IO path in amdsp -a output. 5. Description: JAGad56960 - AM60Srvr dumps core when started with any other LANG setting other than C. 6. Description: JAGad86507 - Man page change for amutil to reflect change to rebuild frequency boundary value. 7. Description: JAGad89595 - Introduce support for maxtor drives. 8. Description: JAGad93369 - Added Incompatible FW download Warning message on completion of FW download through amdload. PHCO_23150: 1. Description: JAGad45524 - FC60 controller may attempt back-end I/O during disk mech firmware download, resulting in Selection Timeout error. 2. Description: JAGad45915 - Parity scan does not report error blocks. 3. Description: JAGad49307 - amdload core dump after controller firmware download, while waiting for completion of reset, if timeout occurs while polling AM60Srvr for status. 4. Description: JAGad49298 - amdsp core dump on fully loaded FC60 with misconfigured ID thumbwheels. 5. Description: JAGad49309 - Downloading 4.X firmware or NVSRAM to passive controller may be problematic. Separate command sometimes required to restore controller to active mode. 6. Description: JAGad49088 - swremove of HP Array Manager/ 60 patch causes /etc/rc.config.d/hparamgr file to be removed, preventing automatic restart of daemon on reboot. PHCO_22544: 1. Description: JAGad04079 - AM60Srvr core dumps on parity scan of LUN with owning controller missing. 2. Description: JAGab16618 - Improve logging in multi-initiator environments. 3. Description: JAGab84551 - SCSI Device Lock Not Granted when attempting syswipe of array. 4. Description: JAGac00096 - LUN recovery difficult. 5. Description: JAGad08697 - AM60Srvr dies intermittently. 6. Description: JAGad23891 - amdload command lock violation. 7. Description: JAGab78599 - Implement Major Event Logging in AM60. 8. Description: JAGac79027 - AM60Srvr exits with PendingQueue::Add buffer overflow. 9. Description: JAGad26497 - LUN display shows drives as ?-? when numDisks is 0. 10. Description: JAGad03253 - Download application firmware and bootware as one file. 11. Description: JAGab82780 - amdsp command fails after LUN's owning controller is removed. 12. Description: JAGad03254 - Add support for RAID 0 LUNs. 13. Description: JAGad03945 - Add support for UTM LUN. 14. Description: JAGad07307 - Handle new sense codes from HP07 firmware. 15. Description: JAGad27589 - Handle SCSI disk firmware convergence in amdload. 16. Description: JAGab15596 - Log files should not be able to grow so as to overflow a file system. 17. Description: JAGac86825 - Disk firmware download problems on Seagate Cheetah III & IV mechs. 18. Description: JAGad02941 - FRU device type 0x07 not always decoded correctly in amlog. 19. Description: JAGad03204 - Enable software controller reset when allowed by firmware. 20. Description: JAGad03821 - LUN number sometimes not initialized in drive group display. 21. Description: JAGad10447 - New FRU group decoding required with HP07 controller firmware. 22. Description: JAGad10909 - Man page updates required for IPR-0012 software. 23. Description: JAGad23902 - Decode FRU info provided in raw MEL data. 24. Description: JAGab78603 - Validate AM60 ANSI C++ compliance. 25. Description: JAGad02940 - Add support for LUN state 83. 26. Description: JAGad05381 - Report disk sense data on SMART events. 27. Description: JAGad07400 - Slot ID in disk display has wrong data type. 28. Description: JAGab75343 - Fix amlog memory leak. 29. Description: JAGab75346 - Fix amdload memory leak. 30. Description: JAGad16493 - amdsp -p -S on more than two links results in a device ID error. 31. Description: JAGad29621 - amdsp -i reports AM60Srvr unavailable, but it is running. 32. Description: JAGad35936 - Fix log clearing problem with HP03 and earlier firmware, introduced in PHCO_22196. 33. Description: JAGad34226 - Change MEL drive slot from 1-based to 0-based, to match amdsp output. Problem was introduced in PHCO_22196. 34. Description: JAGad36256 - Implement environment variable to allow option for more than 100 MB of log files. 35. Description: JAGad36259 - Add non-redundancy warnings for RAID 0. 36. Description: The amlog utility provided in this patch does not read the array log files generated by AM60Srvr from PHCO_21315 or earlier patches. To read old log files, use the archived version of amlog found in /var/adm/sw/save// ARRAY-MGT/opt/hparray/bin/, where OLD_PATCH_NAME is PHCO_21315 or earlier. Enhancement: No (superseded patches contained enhancements) PHCO_28167: Enhancements were delivered in a patch this one has superseded. Please review the Defect Description text for more information. SR: 8606256456 8606250072 8606257164 8606250079 8606250070 8606228418 8606244577 8606224266 8606209241 8606214432 8606217354 8606218398 8606187751 8606217355 8606220455 8606224274 8606176286 8606176678 8606180085 8606180076 8606180087 8606179866 8606166649 8606164929 8606166969 8606166972 8606134945 8606112238 8606113465 8606139399 8606154574 8606108208 8606128227 8606157163 8606134113 8606110077 8606134114 8606134810 8606138106 8606158259 8606129279 8606133797 8606134064 8606134686 8606141086 8606141546 8606154585 8606108212 8606133796 8606136255 8606138196 8606147150 8606160297 8606131564 8606118570 8606108410 8606124350 8606125490 8606124359 8606114903 8606128270 8606128756 Patch Files: OS-Core.ARRAY-MGMT,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP: /opt/hparray/bin/AM60Srvr /opt/hparray/bin/amcfg /opt/hparray/bin/amdsp /opt/hparray/bin/amfmt /opt/hparray/bin/amutil /opt/hparray/bin/ammgr /opt/hparray/bin/amlog /opt/hparray/bin/amdload /usr/lbin/hparray/hparamail /usr/lbin/hparray/hparamgr.hdr /usr/lbin/hparray/hparamgrd /usr/lbin/hparray/hparamgrrc /sbin/init.d/hparamgr /usr/newconfig/etc/rc.config.d/hparamgr /opt/hparray/lib/nls/msg/C/AM60Srvr.cat /opt/hparray/lib/nls/msg/C/am60cl.cat /opt/hparray/lib/nls/msg/C/am60oemmsg01.cat /opt/hparray/lib/nls/msg/C/am60fwerrcod.cat OS-Core.ADMN-ENG-A-MAN,fr=B.11.11,fa=HP-UX_B.11.11_32/64, v=HP: /usr/share/man/man1m.Z/AM60Srvr.1m /usr/share/man/man1m.Z/amcfg.1m /usr/share/man/man1m.Z/amdsp.1m /usr/share/man/man1m.Z/amfmt.1m /usr/share/man/man1m.Z/amutil.1m /usr/share/man/man1m.Z/ammgr.1m /usr/share/man/man1m.Z/amlog.1m /usr/share/man/man1m.Z/amdload.1m what(1) Output: OS-Core.ARRAY-MGMT,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP: /opt/hparray/bin/AM60Srvr: $Revision: 92453-07 linker linker crt0.o B.11.30 011 005 $ HP92453-02A.11.00 HP-UX SYMBOLIC DEBUGGER (END.O ILP 32) $Revision: 75.04 $ +-Copyright (c) 1995 Hewlett-Packard Company +-Copyright (c) 1995 Hewlett-Packard Company +-Copyright (c) 1995 Hewlett-Packard Company +-Copyright (c) 1995 Hewlett-Packard Company | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) | Version: B.11.11.18 +-HP Array Manager/60 +-Copyright (c) 1995 Hewlett-Packard Company | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) | Version: B.11.11.18 +-HP Array Manager/60 - Server +-HP Array Manager/60 - HP Shim | Version: B.11.11.18 | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) +-Copyright (c) 1995 Hewlett-Packard Company +-HP Array Manager/60 - Server Interface Component | Version: B.11.11.18 | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) +-Copyright (c) 1995 Hewlett-Packard Company sascsidev_init.c, $Revision: 1.2 $ sascsidev_init_lun.c, $Revision: 1.7 $ sascsidev_init_dev_file.c, $Revision: 1.3 $ sascsidev_lock.c, $Revision: 1.2 $ sascsidev_io.c, $Revision: 1.3 $ sascsidev_unlock.c, $Revision: 1.2 $ sascsidev_end.c, $Revision: 1.4 $ sascsidev_init_elun.c, $Revision: 1.5 $ sascsidev_io_diag0.c, $Revision: 1.1 $ sascsidev_io_sctl.c, $Revision: 1.1 $ sascsidev_gen.c, $Revision: 1.1 $ tl_io_init.c, $Revision: 1.1 $ tl_path_to_token.c, $Revision: 1.1 $ tl_get_driver_name.c, $Revision: 1.1 $ tl_get_instance.c, $Revision: 1.1 $ tl_io_end.c, $Revision: 1.1 $ tl_get_minor_number.c, $Revision: 1.1 $ tl_get_c_major.c, $Revision: 1.1 $ tl_diag0_init.c, $Revision: 1.1 $ tl_diag0_lock.c, $Revision: 1.1 $ tl_diag0_unlock.c, $Revision: 1.1 $ tl_diag0_end.c, $Revision: 1.1 $ pl_init_st_log_global.c, $Revision: 1.1 $ sys_test.c, $Revision: 1.1 $ tl_get_ioerrno_parm.c, $Revision: 1.1 $ tl_diag0_acc_errno.c, $Revision: 1.1 $ tl_diag0_send_buff.c, $Revision: 1.1 $ tl_diag0_return_buff.c, $Revision: 1.1 $ tl_diag0_get_buff.c, $Revision: 1.3 $ tl_diag0_scsi_io_setup.c, $Revision: 1.1 $ tl_diag0_log_rel.c, $Revision: 1.1 $ add_lit_parm.c, $Revision: 1.1 $ add_msg_parm.c, $Revision: 1.1 $ build_ll_msg.c, $Revision: 1.1 $ log_ll_msg.c, $Revision: 1.1 $ release_ll_msg.c, $Revision: 1.1 $ /opt/hparray/bin/amcfg: $Revision: 92453-07 linker linker crt0.o B.11.30 011 005 $ HP92453-02A.11.00 HP-UX SYMBOLIC DEBUGGER (END.O ILP 32) $Revision: 75.04 $ +-Copyright (c) 1995 Hewlett-Packard Company +-Copyright (c) 1995 Hewlett-Packard Company +-Copyright (c) 1995 Hewlett-Packard Company | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) | Version: B.11.11.18 +-HP Array Manager/60 +-Copyright (c) 1995 Hewlett-Packard Company | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) | Version: B.11.11.18 +-HP Array Manager/60 - Client +-HP Array Manager/60 - Server Interface Component | Version: B.11.11.18 | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) +-Copyright (c) 1995 Hewlett-Packard Company /opt/hparray/bin/amdsp: $Revision: 92453-07 linker linker crt0.o B.11.30 011 005 $ HP92453-02A.11.00 HP-UX SYMBOLIC DEBUGGER (END.O ILP 32) $Revision: 75.04 $ +-Copyright (c) 1995 Hewlett-Packard Company +-Copyright (c) 1995 Hewlett-Packard Company +-Copyright (c) 1995 Hewlett-Packard Company | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) | Version: B.11.11.18 +-HP Array Manager/60 +-Copyright (c) 1995 Hewlett-Packard Company | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) | Version: B.11.11.18 +-HP Array Manager/60 - Client +-HP Array Manager/60 - Server Interface Component | Version: B.11.11.18 | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) +-Copyright (c) 1995 Hewlett-Packard Company /opt/hparray/bin/amfmt: $Revision: 92453-07 linker linker crt0.o B.11.30 011 005 $ HP92453-02A.11.00 HP-UX SYMBOLIC DEBUGGER (END.O ILP 32) $Revision: 75.04 $ +-Copyright (c) 1995 Hewlett-Packard Company +-Copyright (c) 1995 Hewlett-Packard Company +-Copyright (c) 1995 Hewlett-Packard Company | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) | Version: B.11.11.18 +-HP Array Manager/60 +-Copyright (c) 1995 Hewlett-Packard Company | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) | Version: B.11.11.18 +-HP Array Manager/60 - Client +-HP Array Manager/60 - Server Interface Component | Version: B.11.11.18 | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) +-Copyright (c) 1995 Hewlett-Packard Company /opt/hparray/bin/amutil: $Revision: 92453-07 linker linker crt0.o B.11.30 011 005 $ HP92453-02A.11.00 HP-UX SYMBOLIC DEBUGGER (END.O ILP 32) $Revision: 75.04 $ +-Copyright (c) 1995 Hewlett-Packard Company +-Copyright (c) 1995 Hewlett-Packard Company +-Copyright (c) 1995 Hewlett-Packard Company | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) | Version: B.11.11.18 +-HP Array Manager/60 +-Copyright (c) 1995 Hewlett-Packard Company | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) | Version: B.11.11.18 +-HP Array Manager/60 - Client +-HP Array Manager/60 - Server Interface Component | Version: B.11.11.18 | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) +-Copyright (c) 1995 Hewlett-Packard Company /opt/hparray/bin/ammgr: $Revision: 92453-07 linker linker crt0.o B.11.30 011 005 $ HP92453-02A.11.00 HP-UX SYMBOLIC DEBUGGER (END.O ILP 32) $Revision: 75.04 $ +-Copyright (c) 1995 Hewlett-Packard Company +-Copyright (c) 1995 Hewlett-Packard Company +-Copyright (c) 1995 Hewlett-Packard Company | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) | Version: B.11.11.18 +-HP Array Manager/60 +-Copyright (c) 1995 Hewlett-Packard Company | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) | Version: B.11.11.18 +-HP Array Manager/60 - Client +-HP Array Manager/60 - Server Interface Component | Version: B.11.11.18 | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) +-Copyright (c) 1995 Hewlett-Packard Company /opt/hparray/bin/amlog: $Revision: 92453-07 linker linker crt0.o B.11.30 011 005 $ HP92453-02A.11.00 HP-UX SYMBOLIC DEBUGGER (END.O ILP 32) $Revision: 75.04 $ +-Copyright (c) 1995 Hewlett-Packard Company +-Copyright (c) 1995 Hewlett-Packard Company | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) | Version: B.11.11.18 +-HP Array Manager/60 +-HP Array Manager/60 - Standalone Utility | Version: B.11.11.18 | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) +-Copyright (c) 1995 Hewlett-Packard Company /opt/hparray/bin/amdload: $Revision: 92453-07 linker linker crt0.o B.11.30 011 005 $ HP92453-02A.11.00 HP-UX SYMBOLIC DEBUGGER (END.O ILP 32) $Revision: 75.04 $ +-Copyright (c) 1995 Hewlett-Packard Company +-Copyright (c) 1995 Hewlett-Packard Company +-Copyright (c) 1995 Hewlett-Packard Company | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) | Version: B.11.11.18 +-HP Array Manager/60 +-Copyright (c) 1995 Hewlett-Packard Company | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) | Version: B.11.11.18 +-HP Array Manager/60 - Client +-HP Array Manager/60 - Server Interface Component | Version: B.11.11.18 | (built for: HP-UX on B.11.11 2003/01/16 11:09:59) +-Copyright (c) 1995 Hewlett-Packard Company /opt/hparray/lib/nls/msg/C/AM60Srvr.cat: HP AutoRAID [B.11.11.18] AM60Srvr.cat $Revision: 1.1 6 $ Built for HP-UX B.11.11 on 2003/01/16 11:09:59 PM MDT (c) Copyright 1995 Hewlett-Packard Company /opt/hparray/lib/nls/msg/C/am60fwerrcod.cat: HP AutoRAID [B.11.11.18] fwerrcod.cat $Revision: 1.9 $ Built for HP-UX B.11.11 on 2003/01/16 11:09:59 PM MDT (c) Copyright 1995 Hewlett-Packard Company /opt/hparray/lib/nls/msg/C/am60cl.cat: HP AutoRAID [B.11.11.18] am60cl.cat $Revision: 1.60 $ Built for HP-UX B.11.11 on 2003/01/16 11:09:59 PM MDT (c) Copyright 1995 Hewlett-Packard Company /opt/hparray/lib/nls/msg/C/am60oemmsg01.cat: HP AutoRAID [B.11.11.18] oemmsg01.cat $Revision: 1.6 $ Built for HP-UX B.11.11 on 2003/01/16 11:09:59 PM MDT (c) Copyright 1995 Hewlett-Packard Company /usr/lbin/hparray/hparamail: +-HP Array Manager - Mail Script | Version: B.11.00.00 +-Copyright (c) 1999 Hewlett-Packard Company /usr/lbin/hparray/hparamgr.hdr: +-HP Array Manager - Script Header | Version: B.11.00.00 +-Copyright (c) 1999 Hewlett-Packard Company /usr/lbin/hparray/hparamgrd: +-HP Array Manager - Monitor Daemon | Version: B.11.00.00 +-Copyright (c) 1999 Hewlett-Packard Company /usr/lbin/hparray/hparamgrrc: +-HP Array Manager - Startup Script | Version: B.11.00.00 +-Copyright (c) 1999 Hewlett-Packard Company /sbin/init.d/hparamgr: +-HP Array Manager - Startup/Shutdown Script | Version: B.11.00.00 +-Copyright (c) 1999 Hewlett-Packard Company /usr/newconfig/etc/rc.config.d/hparamgr: None OS-Core.ADMN-ENG-A-MAN,fr=B.11.11,fa=HP-UX_B.11.11_32/64, v=HP: /usr/share/man/man1m.Z/AM60Srvr.1m: None /usr/share/man/man1m.Z/amcfg.1m: None /usr/share/man/man1m.Z/amdsp.1m: None /usr/share/man/man1m.Z/amfmt.1m: None /usr/share/man/man1m.Z/amutil.1m: None /usr/share/man/man1m.Z/ammgr.1m: None /usr/share/man/man1m.Z/amlog.1m: None /usr/share/man/man1m.Z/amdload.1m: None cksum(1) Output: OS-Core.ARRAY-MGMT,fr=B.11.11,fa=HP-UX_B.11.11_32/64,v=HP: 541302028 7172524 /opt/hparray/bin/AM60Srvr 311848480 1171992 /opt/hparray/bin/amcfg 3494014361 1320072 /opt/hparray/bin/amdsp 286078619 1135520 /opt/hparray/bin/amfmt 1737002161 1161976 /opt/hparray/bin/amutil 3580061752 1170504 /opt/hparray/bin/ammgr 2694716730 1106040 /opt/hparray/bin/amlog 3454520597 1191696 /opt/hparray/bin/amdload 1699991213 7623 /opt/hparray/lib/nls/msg/C/AM60Srvr.cat 3256849113 8868 /opt/hparray/lib/nls/msg/C/am60fwerrcod.cat 193792014 115795 /opt/hparray/lib/nls/msg/C/am60cl.cat 885447943 1383 /opt/hparray/lib/nls/msg/C/am60oemmsg01.cat 212830779 4931 /usr/lbin/hparray/hparamail 1655478901 3564 /usr/lbin/hparray/hparamgr.hdr 830060169 5893 /usr/lbin/hparray/hparamgrd 4267444545 2873 /usr/lbin/hparray/hparamgrrc 2407782213 6185 /sbin/init.d/hparamgr 999677066 199 /usr/newconfig/etc/rc.config.d/hparamgr OS-Core.ADMN-ENG-A-MAN,fr=B.11.11,fa=HP-UX_B.11.11_32/64, v=HP: 2656791156 1959 /usr/share/man/man1m.Z/AM60Srvr.1m 2364991690 7274 /usr/share/man/man1m.Z/amcfg.1m 15925470 8652 /usr/share/man/man1m.Z/amdsp.1m 2367220464 543 /usr/share/man/man1m.Z/amfmt.1m 2598766968 4310 /usr/share/man/man1m.Z/amutil.1m 3538519012 5426 /usr/share/man/man1m.Z/ammgr.1m 2401712226 5514 /usr/share/man/man1m.Z/amlog.1m 1506435095 5065 /usr/share/man/man1m.Z/amdload.1m Patch Conflicts: None Patch Dependencies: None Hardware Dependencies: None Other Dependencies: This patch provides the utilities for the HP Fibre Array/60. To use the utilities an HP Fibre Array/60 array must be connected and configured to the system. Supersedes: PHCO_27576 PHCO_26824 PHCO_25311 PHCO_23150 PHCO_22544 Equivalent Patches: PHCO_28165: s700: 10.20 s800: 10.20 PHCO_28166: s700: 11.00 11.10 s800: 11.00 11.10 Patch Package Size: 15360 KBytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHCO_28167 5. Run swinstall to install the patch: swinstall -x autoreboot=true -x patch_match_target=true \ -s /tmp/PHCO_28167.depot By default swinstall will archive the original software in /var/adm/sw/save/PHCO_28167. If you do not wish to retain a copy of the original software, include the patch_save_files option in the swinstall command above: -x patch_save_files=false WARNING: If patch_save_files is false when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. For future reference, the contents of the PHCO_28167.text file is available in the product readme: swlist -l product -a readme -d @ /tmp/PHCO_28167.depot To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHCO_28167.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: None