Patch Name: PHCO_28166 Patch Description: s700_800 11.X HP Array Manager/60 cumulative patch Creation Date: 03/01/16 Post Date: 03/01/17 Hardware Platforms - OS Releases: s700: 11.00 11.10 s800: 11.00 11.10 Products: N/A Filesets: OS-Core.ARRAY-MGMT,fr=B.11.00,fa=HP-UX_B.11.00_32/64,v=HP OS-Core.ARRAY-MGMT,fr=B.11.10,fa=HP-UX_B.11.10_32/64,v=HP OS-Core.ADMN-ENG-A-MAN,fr=B.11.00,fa=HP-UX_B.11.00_32/64,v=HP OS-Core.ADMN-ENG-A-MAN,fr=B.11.10,fa=HP-UX_B.11.10_32/64,v=HP Automatic Reboot?: No Status: General Release Critical: No (superseded patches were critical) PHCO_23149: ABORT OTHER Patch provides critical functionality for use of HP Fibre Array/60 devices. Category Tags: defect_repair hardware_enablement enhancement general_release critical halts_system Path Name: /hp-ux_patches/s700_800/11.X/PHCO_28166 Symptoms: PHCO_28166: 1. JAGae20771 - EMS improperly reports RCD. 2. JAGae16454 - Bogus Mel logs logged by AM60. PHCO_27575: 1. JAGae21470 - After OV SAM Allocator is activated, AM60 becomes highly unstable. PHCO_26823: 1. JAGae16461 - amcfg -R lun rebind fails at times with SCSI lock not granted error. 2. JAGae16452 - AM60 core dumping due to MEL logging. 3. JAGad97475 - AM60Srvr will not start up, must delete the AM logs first. 4. JAGae11063 - Need warning added for -d option of amutil for FC60. 5. JAGad93361 - amdsp reports different aliases for the same array. PHCO_25310: 1. JAGad78428 - Only 8 digits of the disk serial number is displayed by amdsp. 2. JAGad83623 - LUN 0 can be removed with the -force option. 3. JAGad86506 - Lun rebuild frequency can be defined beyond 3.0 seconds in amutil. 4. JAGad87547 - Introduce date and IO path in amdsp -a output. 5. JAGad56960 - AM60Srvr dumps cpore when started with any other LANG setting than C is defined. 6. JAGad86507 - Man page change for amutil to reflect change to rebuild frequency boundary value. 7. JAGad89595 - Introduce support for maxtor drives. 8. JAGad93369 - Added Incompatible FW download Warning message on completion of FW download through amdload. PHCO_23149: 1. JAGad45524 - FC60 controller may attempt back-end I/O during disk mech firmware download, resulting in Selection Timeout error. 2. JAGad45915 - Parity scan does not report error blocks. 3. JAGad49307 - amdload core dump after controller firmware download, while waiting for completion of reset, if timeout occurs while polling AM60Srvr for status. 4. JAGad49298 - amdsp core dump on fully loaded FC60 with misconfigured ID thumbwheels. 5. JAGad49309 - Downloading 4.X firmware or NVSRAM to passive controller may be problematic. Separate command sometimes required to restore controller to active mode. 6. JAGad49088 - swremove of HP Array Manager/60 patch causes /etc/rc.config.d/hparamgr file to be removed, preventing automatic restart of daemon on reboot. PHCO_22628: 1. JAGad35936 - Fix log clearing problem with HP03 and earlier firmware, introduced in PHCO_22196. 2. JAGad34226 - Change MEL drive slot from 1-based to 0-based, to match amdsp output. Problem was introduced in PHCO_22196. 3. JAGad36256 - Implement environment variable to allow option for more than 100 MB of log files. 4. JAGad36259 - Add non-redundancy warnings for RAID 0. 5. The amlog utility provided in this patch does not read the array log files generated by AM60Srvr from PHCO_21315 or earlier patches. To read old log files, use the archived version of amlog found in /var/adm/sw/ save//ARRAY-MGT/opt/hparray/bin/, where OLD_PATCH_NAME is PHCO_21315 or earlier. PHCO_22196: 1. JAGad04079 - AM60Srvr core dumps on parity scan of LUN with owning controller missing. 2. JAGab16618 - Improve logging in multi-initiator environments. 3. JAGab84551 - SCSI Device Lock Not Granted when attempting syswipe of array. 4. JAGac00096 - LUN recovery difficult. 5. JAGad08697 - AM60Srvr dies intermittently. 6. JAGad23891 - amdload command lock violation. 7. JAGab78599 - Implement Major Event Logging in AM60. 8. JAGac79027 - AM60Srvr exits with PendingQueue::Add buffer overflow. 9. JAGad26497 - LUN display shows drives as ?-? when numDisks is 0. 10. JAGad03253 - Download application firmware and bootware as one file. 11. JAGab82780 - amdsp command fails after LUN's owning controller is removed. 12. JAGad03254 - Add support for RAID 0 LUNs. 13. JAGad03945 - Add support for UTM LUN. 14. JAGad07307 - Handle new sense codes from HP07 firmware. 15. JAGad27589 - Handle SCSI disk firmware convergence in amdload. 16. JAGab15596 - Log files should not be able to grow so as to overflow a file system. 17. JAGac86825 - Disk firmware download problems on Seagate Cheetah III & IV mechs. 18. JAGad02941 - FRU device type 0x07 not always decoded correctly in amlog. 19. JAGad03204 - Enable software controller reset when allowed by firmware. 20. JAGad03821 - LUN number sometimes not initialized in drive group display. 21. JAGad10447 - New FRU group decoding required with HP07 controller firmware. 22. JAGad10909 - Man page updates required for IPR-0012 software. 23. JAGad23902 - Decode FRU info provided in raw MEL data. 24. JAGab78603 - Validate AM60 ANSI C++ compliance. 25. JAGad02940 - Add support for LUN state 83. 26. JAGad05381 - Report disk sense data on SMART events. 27. JAGad07400 - Slot ID in disk display has wrong data type. 28. JAGab75343 - Fix amlog memory leak. 29. JAGab75346 - Fix amdload memory leak. 30. JAGad16493 - amdsp -p -S on more than two links results in a device ID error. 31. JAGad29621 - amdsp -i reports AM60Srvr unavailable, but it is running. PHCO_21315: 1. JAGad00714 - Change connection messages going to syslog from info type to debug type. Also change rescan message to be debug as well. PHCO_20218: 1. JAGac33875 - AM60Srvr only logs events when LUN 1 is configured. 2. JAGab78816 - amlog does not show LUN info when a LUN is failed with unflushed cache. 3. JAGac39733 - AM60Srvr fails with core on startup on systems with more than ten FC-60 arrays attached. 4. JAGac40880 - amfmt command requires change to man page to indicate that it is a data destructive command. 5. JAGac39742 - amlog does not decode all sense codes. 6. JAGab76959 - amcfg fails with segmentation violation if an invalid channel is specified when configuring a LUN. 7. JAGac29676 - make amcfg bind LUN default segment size 16K, instead of current cache block size. 8. JAGab32006 - Minor typographical error in amcfg man page 9. JAGac79070 - Need to re-designate SC-10 power supplies and fans as A, B instead of 1, 2. 10. JAGac86303 - Change "ARM" reference to "AM60" in amlog output and syslog file, when a required message catalog entry can't be found. PHCO_19571: 1. JAGab20973 - Incorrect diagnostic message when specifying alias longer than 16 characters. 2. JAGab24502 - Unclear diagnostic message when binding a LUN on a passive controller. 3. JAGab25356 - Ambiguous cache battery age shown in controller display. 4. JAGab14439 - Rounding problem when setting and displaying cache flush options. 5. JAGab18057 - Need to add interpretation of FRU code and qualifier for amlog. 6. JAGab57569 - SCSI channel, SCSI ID, enclosure ID and slot ID are ambiguous in disk display. 7. JAGab21223 - amdsp fails with core file during LUN display when all original drives are spared. 8. JAGab39222 - Need improved handling of commands which require controller synchronization (reset battery age, set time, set alias), when one controller is missing or failed. 9. JAGab67460 - Need capability to mark disks operational from any failed state. 10. JAGab68932 - Need an option for amdload to allow BCC firmware download regardless of disk states. 11. JAGab43951 - Need to show NVSRAM version in controller display. 12. JAGab43865 - Need capability to reset LUN cache parameters to default values, and show a cache state table in the LUN display. 13. JAGab17231 - Command line extended help and usage messages need to be more consistent with man pages. 14. JAGab65570 - amdload man page must describe requirement to download bootware, firmware, NVSRAM file in proper sequence. 15. JAGab70912 - Need capability to flash LEDs for a drive list. 16. Need SIC HWPath call to allow EMS client to report array hardware path. 17. JAGab72268 - Need capability to download firmware to IBM disks. 18. Client/server interface (SIC) needs forward and backward compatibility to support EMS monitor. PHCO_19486: 1. JAGab31757 - amdsp may fail with core file, Segmentation violation. PHCO_18685: 1. JAGaa73125 - Man pages updated to conform to CLI spec rev 3.0. 2. JAGaa93941 - Cache battery age moved from amdsp default display to controller display. 3. JAGab03636 - Changed exit code from 2 (usage error) to 1 (execution error) for various options of ammgr, amcfg, and amutil, which would have resulted in illegal requests (e.g., delete a LUN that is not present). 4. JAGab03882 - Provided a separate diagnostic message for duplicate ArrayAlias. 5. JAGab11089 - ArrayAlias may now only contain alpha, numeric, underscore, pound sign, dot. 6. JAGab14438 - Blocked parity scan on a LUN that doesn't exist. 7. JAGab16447 - Blocked halt parity scan when one isn't running. 8. JAGab17227 - Provided missing error handling for parity scan. 9. JAGab17621 - AM60 commands much much slower when a BCC card and/or cntlr are faulted 10. JAGab17813 - LUN rebuild freq and amt report as "Default" instead of "0" (std mode only), when not previously set. 11. JAGab17844 - amdsp -h arrayid return good status for battery when one bank is discharged 12. JAGab18055 - Provided SK-ASC-ASCQ decode text for amlog. 13. JAGab18144 - Added rebuild progress (amdsp -r) to amdsp -a output. 14. JAGab18198 - amdsp fails to discover array's S/N if only Ctlr B connected 15. JAGab19275 - More accurate error handling for binding and replacing LUNs when the controller doesn't respond. 16. JAGab19279 - amdsp -R; amdsp -i mis-discovers array w only ctlr B connected 17. JAGab19286 - amdsp -c incorrectly? reports FAILED mode for unconnected ctlr PHCO_18549: Initial Release Install Patch. Defect Description: PHCO_28166: 1. Description: JAGae20771 - EMS improperly reports RCD. 2. Description: JAGae16454 - Bogus Mel logs logged by the AM60. PHCO_27575: 1. Description: JAGae21470 - After OV SAM Allocator is activated, AM60 becomes highly unstable. PHCO_26823: 1. Description: JAGae16461 - amcfg -R Lun rebind fails at times with SCSI lock not granted error. 2. Description: JAGae16452 - AM60 Core dump due to extra bytes in MEL log. 3. Description: JAGad97475 - AM60Srvr will not start up, must delete the AM logs first. 4. Description: JAGae11063 - Need warning added for -d option of amutil for FC60. 5. Description: JAGad93361 - amdsp -l reports different aliases. PHCO_25310: 1. Description: JAGad78428 - Only 8 digits of the disk serial number is diplayed by amdsp. 2. Description: JAGad83623 - LUN 0 can be removed with the -force option. 3. Description: JAGad86506 - Lun rebuild frequency can be defined beyond 3.0 seconds in amutil. 4. Description: JAGad87547 - Introduce date and IO path in amdsp -a output. 5. Description: JAGad56960 - AM60Srvr dumps cpore when started with any other LANG setting than C is defined. 6. Description: JAGad86507 - Man page change for amutil to reflect change to rebuild frequency boundary value. 7. Description: JAGad89595 - Introduce support for maxtor drives. 8. Description: JAGad93369 - Added Incompatible FW download Warning message on completion of FW download through amdload. PHCO_23149: 1. Description: JAGad45524 - FC60 controller may attempt back-end I/O during disk mech firmware download, resulting in Selection Timeout error. 2. Description: JAGad45915 - Parity scan does not report error blocks. 3. Description: JAGad49307 - amdload core dump after controller firmware download, while waiting for completion of reset, if timeout occurs while polling AM60Srvr for status. 4. Description: JAGad49298 - amdsp core dump on fully loaded FC60 with misconfigured ID thumbwheels. 5. Description: JAGad49309 - Downloading 4.X firmware or NVSRAM to passive controller may be problematic. Separate command sometimes required to restore controller to active mode. 6. Description: JAGad49088 - swremove of HP Array Manager/ 60 patch causes /etc/rc.config.d/hparamgr file to be removed, preventing automatic restart of daemon on reboot. PHCO_22628: 1. Description: JAGad35936 - Fix log clearing problem with HP03 and earlier firmware, introduced in PHCO_22196. 2. Description: JAGad34226 - Change MEL drive slot from 1-based to 0-based, to match amdsp output. Problem was introduced in PHCO_22196. 3. Description: JAGad36256 - Implement environment variable to allow option for more than 100 MB of log files. 4. Description: JAGad36259 - Add non-redundancy warnings for RAID 0. 5. Description: The amlog utility provided in this patch does not read the array log files generated by AM60Srvr from PHCO_21315 or earlier patches. To read old log files, use the archived version of amlog found in /var/adm/sw/save// ARRAY-MGT/opt/hparray/bin/, where OLD_PATCH_NAME is PHCO_21315 or earlier. PHCO_22196: 1. Description: JAGad04079 - AM60Srvr core dumps on parity scan of LUN with owning controller missing. 2. Description: JAGab16618 - Improve logging in multi-initiator environments. 3. Description: JAGab84551 - SCSI Device Lock Not Granted when attempting syswipe of array. 4. Description: JAGac00096 - LUN recovery difficult. 5. Description: JAGad08697 - AM60Srvr dies intermittently. 6. Description: JAGad23891 - amdload command lock violation. 7. Description: JAGab78599 - Implement Major Event Logging in AM60. 8. Description: JAGac79027 - AM60Srvr exits with PendingQueue::Add buffer overflow. 9. Description: JAGad26497 - LUN display shows drives as ?-? when numDisks is 0. 10. Description: JAGad03253 - Download application firmware and bootware as one file. 11. Description: JAGab82780 - amdsp command fails after LUN's owning controller is removed. 12. Description: JAGad03254 - Add support for RAID 0 LUNs. 13. Description: JAGad03945 - Add support for UTM LUN. 14. Description: JAGad07307 - Handle new sense codes from HP07 firmware. 15. Description: JAGad27589 - Handle SCSI disk firmware convergence in amdload. 16. Description: JAGab15596 - Log files should not be able to grow so as to overflow a file system. 17. Description: JAGac86825 - Disk firmware download problems on Seagate Cheetah III & IV mechs. 18. Description: JAGad02941 - FRU device type 0x07 not always decoded correctly in amlog. 19. Description: JAGad03204 - Enable software controller reset when allowed by firmware. 20. Description: JAGad03821 - LUN number sometimes not initialized in drive group display. 21. Description: JAGad10447 - New FRU group decoding required with HP07 controller firmware. 22. Description: JAGad10909 - Man page updates required for IPR-0012 software. 23. Description: JAGad23902 - Decode FRU info provided in raw MEL data. 24. Description: JAGab78603 - Validate AM60 ANSI C++ compliance. 25. Description: JAGad02940 - Add support for LUN state 83. 26. Description: JAGad05381 - Report disk sense data on SMART events. 27. Description: JAGad07400 - Slot ID in disk display has wrong data type. 28. Description: JAGab75343 - Fix amlog memory leak. 29. Description: JAGab75346 - Fix amdload memory leak. 30. Description: JAGad16493 - amdsp -p -S on more than two links results in a device ID error. 31. Description: JAGad29621 - amdsp -i reports AM60Srvr unavailable, but it is running. PHCO_21315: 1. Description: JAGad00714 - Change connection messages going to syslog from info type to debug type. Also change rescan message to be debug as well. PHCO_20218: 1. Description: JAGac33875 - AM60Srvr only logs events when LUN 1 is configured. 2. Description: JAGab78816 - amlog does not show LUN info when a LUN is failed with unflushed cache. 3. Description: JAGac39733 - AM60Srvr fails with core on startup on systems with more than ten FC-60 arrays attached. 4. Description: JAGac40880 - amfmt command requires change to man page to indicate that it is a data destructive command. 5. Description: JAGac39742 - amlog does not decode all sense codes. 6. Description: JAGab76959 - amcfg fails with segmentation violation if an invalid channel is specified when configuring a LUN. 7. Description: JAGac29676 - make amcfg bind LUN default segment size 16K, instead of current cache block size. 8. Description: JAGab32006 - Minor typographical error in amcfg man page. 9. Description: JAGac79070 - Need to re-designate SC-10 power supplies and fans as A, B instead of 1, 2. 10. Description: JAGac86303 - Change "ARM" reference to "AM60" in amlog output and syslog file, when a required message catalog entry can't be found. PHCO_19571: 1. Description: JAGab20973 - Incorrect diagnostic message when specifying alias longer than 16 characters. 2. Description: JAGab24502 - Unclear diagnostic message when binding a LUN on a passive controller. 3. Description: JAGab25356 - Ambiguous cache battery age shown in controller display. 4. Description: JAGab14439 - Rounding problem when setting and displaying cache flush options. 5. Description: JAGab18057 - Need to add interpretation of FRU code and qualifier for amlog. 6. Description: JAGab57569 - SCSI channel, SCSI ID, enclosure ID and slot ID are ambiguous in disk display. 7. Description: JAGab21223 - amdsp fails with core file during LUN display when all original drives are spared. 8. Description: JAGab39222 - Need improved handling of commands which require controller synchronization (reset battery age, set time, set alias), when one controller is missing or failed. 9. Description: JAGab67460 - Need capability to mark disks operational from any failed state. 10. Description: JAGab68932 - Need an option for amdload to allow BCC firmware download regardless of disk states. 11. Description: JAGab43951 - Need to show NVSRAM version in controller display. 12. Description: JAGab43865 - Need capability to reset LUN cache parameters to default values, and show a cache state table in the LUN display. 13. Description: JAGab17231 - Command line extended help and usage messages need to be more consistent with man pages. 14. Description: JAGab65570 - amdload man page must describe requirement to download bootware, firmware, NVSRAM file in proper sequence. 15. Description: JAGab70912 - Need capability to flash LEDs for a drive list. 16. Description: Need SIC HWPath call to allow EMS client to report array hardware path. 17. Description: JAGab72268 - Need capability to download firmware to IBM disks. 18. Description: Client/server interface (SIC) needs forward and backward compatibility to support EMS monitor. PHCO_19486: 1. Description: JAGab31757 - amdsp may fail with core file, Segmentation violation. PHCO_18685: 1. Description: JAGaa73125 - Man pages updated to conform to CLI spec rev 3.0. 2. Description: JAGaa93941 - Cache battery age moved from amdsp default display to controller display. 3. Description: JAGab03636 - Changed exit code from 2 (usage error) to 1 (execution error) for various options of ammgr, amcfg,and amutil, which would have resulted in illegal requests (e.g., delete a LUN that is not present). 4. Description: JAGab03882 - Provided a separate diagnostic message for duplicate ArrayAlias. 5. Description: JAGab11089 - ArrayAlias may now only contain alpha, numeric, underscore, pound sign, dot. 6. Description: JAGab14438 - Blocked parity scan on a LUN that doesn't exist. 7. Description: JAGab16447 - Blocked halt parity scan when one isn't running. 8. Description: JAGab17227 - Provided missing error handling for parity scan. 9. Description: JAGab17621 - AM60 commands much much slower when a BCC card and/or cntlr are faulted 10. Description: JAGab17813 - LUN rebuild freq and amt report as "Default" instead of "0" (std mode only), when not previously set. 11. Description: JAGab17844 - amdsp -h arrayid return good status for battery when one bank is discharged 12. Description: JAGab18055 - Provided SK-ASC-ASCQ decode text for amlog. 13. Description: JAGab18144 - Added rebuild progress (amdsp -r) to amdsp -a output. 14. Description: JAGab18198 - amdsp fails to discover array's S/N if only Ctlr B connected 15. Description: JAGab19275 - More accurate error handling for binding and replacing LUNs when the controller doesn't respond. 16. Description: JAGab19279 - amdsp -R; amdsp -i mis-discovers array w only ctlr B connected 17. Description: JAGab19286 - amdsp -c incorrectly? reports FAILED mode for unconnected ctlr PHCO_18549: 1. Description: Initial Release Install Patch. Enhancement: No (superseded patches contained enhancements) PHCO_28166: Enhancements were delivered in a patch this one has superseded. Please review the Defect Description text for more information. SR: 8606256456 8606250072 8606257164 8606250079 8606250070 8606228418 8606244577 8606224266 8606209241 8606214432 8606217354 8606218398 8606187751 8606217355 8606220455 8606224274 8606176286 8606176678 8606180085 8606180076 8606180087 8606179866 8606166649 8606164929 8606166969 8606166972 8606134945 8606112238 8606113465 8606139399 8606154574 8606108208 8606128227 8606157163 8606134113 8606110077 8606134114 8606134810 8606138106 8606158259 8606129279 8606133797 8606134064 8606134686 8606141086 8606141546 8606154585 8606108212 8606133796 8606136255 8606138196 8606147150 8606160297 8606131564 8606118570 8606108410 8606124350 8606125490 8606124359 8606114903 8606128270 8606128756 Patch Files: OS-Core.ARRAY-MGMT,fr=B.11.00,fa=HP-UX_B.11.00_32/64,v=HP: OS-Core.ARRAY-MGMT,fr=B.11.10,fa=HP-UX_B.11.10_32/64,v=HP: /opt/hparray/bin/AM60Srvr /opt/hparray/bin/amcfg /opt/hparray/bin/amdsp /opt/hparray/bin/amfmt /opt/hparray/bin/amutil /opt/hparray/bin/ammgr /opt/hparray/bin/amlog /opt/hparray/bin/amdload /usr/lbin/hparray/hparamail /usr/lbin/hparray/hparamgr.hdr /usr/lbin/hparray/hparamgrd /usr/lbin/hparray/hparamgrrc /sbin/init.d/hparamgr /usr/newconfig/etc/rc.config.d/hparamgr /opt/hparray/lib/nls/msg/C/AM60Srvr.cat /opt/hparray/lib/nls/msg/C/am60cl.cat /opt/hparray/lib/nls/msg/C/am60oemmsg01.cat /opt/hparray/lib/nls/msg/C/am60fwerrcod.cat OS-Core.ADMN-ENG-A-MAN,fr=B.11.00,fa=HP-UX_B.11.00_32/64, v=HP: OS-Core.ADMN-ENG-A-MAN,fr=B.11.10,fa=HP-UX_B.11.10_32/64, v=HP: /opt/hparray/share/man/man1m/AM60Srvr.1m /opt/hparray/share/man/man1m/amcfg.1m /opt/hparray/share/man/man1m/amdsp.1m /opt/hparray/share/man/man1m/amfmt.1m /opt/hparray/share/man/man1m/amutil.1m /opt/hparray/share/man/man1m/ammgr.1m /opt/hparray/share/man/man1m/amlog.1m /opt/hparray/share/man/man1m/amdload.1m what(1) Output: OS-Core.ARRAY-MGMT,fr=B.11.00,fa=HP-UX_B.11.00_32/64,v=HP: /opt/hparray/bin/AM60Srvr: $Revision: 92453-07 linker linker crt0.o B.11.30 010 914 $ HP92453-02A.11.00 HP-UX SYMBOLIC DEBUGGER (END.O ILP 32) $Revision: 75.04 $ | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) | Version: B.11.00.18 +-HP Array Manager/60 +-Copyright (c) 1995 Hewlett-Packard Company | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) | Version: B.11.00.18 +-HP Array Manager/60 - Server +-HP Array Manager/60 - HP Shim | Version: B.11.00.18 | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) +-Copyright (c) 1995 Hewlett-Packard Company sascsidev_init.c, $Revision: 1.1 $ sascsidev_init_lun.c, $Revision: 1.1 $ sascsidev_init_dev_file.c, $Revision: 1.2 $ sascsidev_lock.c, $Revision: 1.1 $ sascsidev_io.c, $Revision: 1.1 $ sascsidev_unlock.c, $Revision: 1.1 $ sascsidev_end.c, $Revision: 1.3 $ sascsidev_io_diag0.c, $Revision: 1.1 $ sascsidev_io_sctl.c, $Revision: 1.1 $ sascsidev_gen.c, $Revision: 1.1 $ tl_io_init.c, $Revision: 1.1 $ tl_path_to_token.c, $Revision: 1.1 $ tl_get_driver_name.c, $Revision: 1.1 $ tl_io_end.c, $Revision: 1.1 $ tl_get_minor_number.c, $Revision: 1.1 $ tl_get_c_major.c, $Revision: 1.1 $ tl_diag0_init.c, $Revision: 1.1 $ tl_diag0_lock.c, $Revision: 1.1 $ tl_diag0_unlock.c, $Revision: 1.1 $ tl_diag0_end.c, $Revision: 1.1 $ pl_init_st_log_global.c, $Revision: 1.1 $ sys_test.c, $Revision: 1.1 $ tl_get_ioerrno_parm.c, $Revision: 1.1 $ tl_diag0_acc_errno.c, $Revision: 1.1 $ tl_diag0_send_buff.c, $Revision: 1.1 $ tl_diag0_return_buff.c, $Revision: 1.1 $ tl_diag0_get_buff.c, $Revision: 1.1 $ tl_diag0_scsi_io_setup.c, $Revision: 1.1 $ tl_diag0_log_rel.c, $Revision: 1.1 $ add_lit_parm.c, $Revision: 1.1 $ add_msg_parm.c, $Revision: 1.1 $ build_ll_msg.c, $Revision: 1.1 $ log_ll_msg.c, $Revision: 1.1 $ release_ll_msg.c, $Revision: 1.1 $ +-HP Array Manager/60 - Server Interface Component | Version: B.11.00.18 | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) +-Copyright (c) 1995 Hewlett-Packard Company /opt/hparray/bin/amcfg: $Revision: 92453-07 linker linker crt0.o B.11.30 010 914 $ HP92453-02A.11.00 HP-UX SYMBOLIC DEBUGGER (END.O ILP 32) $Revision: 75.04 $ | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) | Version: B.11.00.18 +-HP Array Manager/60 +-Copyright (c) 1995 Hewlett-Packard Company | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) | Version: B.11.00.18 +-HP Array Manager/60 - Client +-HP Array Manager/60 - Server Interface Component | Version: B.11.00.18 | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) +-Copyright (c) 1995 Hewlett-Packard Company /opt/hparray/bin/amdsp: $Revision: 92453-07 linker linker crt0.o B.11.30 010 914 $ HP92453-02A.11.00 HP-UX SYMBOLIC DEBUGGER (END.O ILP 32) $Revision: 75.04 $ | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) | Version: B.11.00.18 +-HP Array Manager/60 +-Copyright (c) 1995 Hewlett-Packard Company | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) | Version: B.11.00.18 +-HP Array Manager/60 - Client +-HP Array Manager/60 - Server Interface Component | Version: B.11.00.18 | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) +-Copyright (c) 1995 Hewlett-Packard Company /opt/hparray/bin/amfmt: $Revision: 92453-07 linker linker crt0.o B.11.30 010 914 $ HP92453-02A.11.00 HP-UX SYMBOLIC DEBUGGER (END.O ILP 32) $Revision: 75.04 $ | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) | Version: B.11.00.18 +-HP Array Manager/60 +-Copyright (c) 1995 Hewlett-Packard Company | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) | Version: B.11.00.18 +-HP Array Manager/60 - Client +-HP Array Manager/60 - Server Interface Component | Version: B.11.00.18 | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) +-Copyright (c) 1995 Hewlett-Packard Company /opt/hparray/bin/amutil: $Revision: 92453-07 linker linker crt0.o B.11.30 010 914 $ HP92453-02A.11.00 HP-UX SYMBOLIC DEBUGGER (END.O ILP 32) $Revision: 75.04 $ | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) | Version: B.11.00.18 +-HP Array Manager/60 +-Copyright (c) 1995 Hewlett-Packard Company | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) | Version: B.11.00.18 +-HP Array Manager/60 - Client +-HP Array Manager/60 - Server Interface Component | Version: B.11.00.18 | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) +-Copyright (c) 1995 Hewlett-Packard Company /opt/hparray/bin/ammgr: $Revision: 92453-07 linker linker crt0.o B.11.30 010 914 $ HP92453-02A.11.00 HP-UX SYMBOLIC DEBUGGER (END.O ILP 32) $Revision: 75.04 $ | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) | Version: B.11.00.18 +-HP Array Manager/60 +-Copyright (c) 1995 Hewlett-Packard Company | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) | Version: B.11.00.18 +-HP Array Manager/60 - Client +-HP Array Manager/60 - Server Interface Component | Version: B.11.00.18 | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) +-Copyright (c) 1995 Hewlett-Packard Company /opt/hparray/bin/amlog: $Revision: 92453-07 linker linker crt0.o B.11.30 010 914 $ HP92453-02A.11.00 HP-UX SYMBOLIC DEBUGGER (END.O ILP 32) $Revision: 75.04 $ | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) | Version: B.11.00.18 +-HP Array Manager/60 +-HP Array Manager/60 - Standalone Utility | Version: B.11.00.18 | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) +-Copyright (c) 1995 Hewlett-Packard Company /opt/hparray/bin/amdload: $Revision: 92453-07 linker linker crt0.o B.11.30 010 914 $ HP92453-02A.11.00 HP-UX SYMBOLIC DEBUGGER (END.O ILP 32) $Revision: 75.04 $ | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) | Version: B.11.00.18 +-HP Array Manager/60 +-Copyright (c) 1995 Hewlett-Packard Company | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) | Version: B.11.00.18 +-HP Array Manager/60 - Client +-HP Array Manager/60 - Server Interface Component | Version: B.11.00.18 | (built for: HP-UX on B.11.00 2003/01/16 11:08:50) +-Copyright (c) 1995 Hewlett-Packard Company /opt/hparray/lib/nls/msg/C/AM60Srvr.cat: HP AutoRAID [B.11.00.18] AM60Srvr.cat $Revision: 1.1 6 $ Built for HP-UX B.11.00 on 2003/01/16 11:08:50 PM MDT (c) Copyright 1995 Hewlett-Packard Company /opt/hparray/lib/nls/msg/C/am60fwerrcod.cat: HP AutoRAID [B.11.00.18] fwerrcod.cat $Revision: 1.9 $ Built for HP-UX B.11.00 on 2003/01/16 11:08:50 PM MDT (c) Copyright 1995 Hewlett-Packard Company /opt/hparray/lib/nls/msg/C/am60cl.cat: HP AutoRAID [B.11.00.18] am60cl.cat $Revision: 1.60 $ Built for HP-UX B.11.00 on 2003/01/16 11:08:50 PM MDT (c) Copyright 1995 Hewlett-Packard Company /opt/hparray/lib/nls/msg/C/am60oemmsg01.cat: HP AutoRAID [B.11.00.18] oemmsg01.cat $Revision: 1.6 $ Built for HP-UX B.11.00 on 2003/01/16 11:08:50 PM MDT (c) Copyright 1995 Hewlett-Packard Company /usr/lbin/hparray/hparamail: +-HP Array Manager - Mail Script | Version: B.11.00.00 +-Copyright (c) 1999 Hewlett-Packard Company /usr/lbin/hparray/hparamgr.hdr: +-HP Array Manager - Script Header | Version: B.11.00.00 +-Copyright (c) 1999 Hewlett-Packard Company /usr/lbin/hparray/hparamgrd: +-HP Array Manager - Monitor Daemon | Version: B.11.00.00 +-Copyright (c) 1999 Hewlett-Packard Company /usr/lbin/hparray/hparamgrrc: +-HP Array Manager - Startup Script | Version: B.11.00.00 +-Copyright (c) 1999 Hewlett-Packard Company /sbin/init.d/hparamgr: +-HP Array Manager - Startup/Shutdown Script | Version: B.11.00.00 +-Copyright (c) 1999 Hewlett-Packard Company /usr/newconfig/etc/rc.config.d/hparamgr: None OS-Core.ADMN-ENG-A-MAN,fr=B.11.00,fa=HP-UX_B.11.00_32/64, v=HP: /opt/hparray/share/man/man1m/AM60Srvr.1m: None /opt/hparray/share/man/man1m/amcfg.1m: None /opt/hparray/share/man/man1m/amdsp.1m: None /opt/hparray/share/man/man1m/amfmt.1m: None /opt/hparray/share/man/man1m/amutil.1m: None /opt/hparray/share/man/man1m/ammgr.1m: None /opt/hparray/share/man/man1m/amlog.1m: None /opt/hparray/share/man/man1m/amdload.1m: None cksum(1) Output: OS-Core.ARRAY-MGMT,fr=B.11.00,fa=HP-UX_B.11.00_32/64,v=HP: 3996464525 2670256 /opt/hparray/bin/AM60Srvr 1222867812 1151416 /opt/hparray/bin/amcfg 4175748024 1307592 /opt/hparray/bin/amdsp 1665166650 1123176 /opt/hparray/bin/amfmt 124492996 1145504 /opt/hparray/bin/amutil 3346186668 1154040 /opt/hparray/bin/ammgr 184778492 1089952 /opt/hparray/bin/amlog 2953484340 1175216 /opt/hparray/bin/amdload 2284639687 7623 /opt/hparray/lib/nls/msg/C/AM60Srvr.cat 3094880021 8868 /opt/hparray/lib/nls/msg/C/am60fwerrcod.cat 440113252 115795 /opt/hparray/lib/nls/msg/C/am60cl.cat 3865623846 1383 /opt/hparray/lib/nls/msg/C/am60oemmsg01.cat 212830779 4931 /usr/lbin/hparray/hparamail 1655478901 3564 /usr/lbin/hparray/hparamgr.hdr 830060169 5893 /usr/lbin/hparray/hparamgrd 4267444545 2873 /usr/lbin/hparray/hparamgrrc 1903030426 6167 /sbin/init.d/hparamgr 999677066 199 /usr/newconfig/etc/rc.config.d/hparamgr OS-Core.ADMN-ENG-A-MAN,fr=B.11.00,fa=HP-UX_B.11.00_32/64, v=HP: 3615556153 3418 /opt/hparray/share/man/man1m/AM60Srvr.1m 3577060457 14504 /opt/hparray/share/man/man1m/amcfg.1m 2389533511 17293 /opt/hparray/share/man/man1m/amdsp.1m 1226416682 799 /opt/hparray/share/man/man1m/amfmt.1m 441868023 7890 /opt/hparray/share/man/man1m/amutil.1m 2291579198 10467 /opt/hparray/share/man/man1m/ammgr.1m 1899341439 10153 /opt/hparray/share/man/man1m/amlog.1m 2068729702 10005 /opt/hparray/share/man/man1m/amdload.1m Patch Conflicts: None Patch Dependencies: None Hardware Dependencies: None Other Dependencies: This patch provides the utilities for the HP Fibre Array/60. To use the utilities an HP Fibre Array/60 array must be connected and configured to the system. Supersedes: PHCO_27575 PHCO_26823 PHCO_25310 PHCO_23149 PHCO_22628 PHCO_22196 PHCO_21315 PHCO_20218 PHCO_19571 PHCO_19486 PHCO_18685 PHCO_18549 Equivalent Patches: PHCO_28165: s700: 10.20 s800: 10.20 PHCO_28167: s700: 11.11 s800: 11.11 Patch Package Size: 10900 KBytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHCO_28166 5. Run swinstall to install the patch: swinstall -x autoreboot=true -x patch_match_target=true \ -s /tmp/PHCO_28166.depot By default swinstall will archive the original software in /var/adm/sw/save/PHCO_28166. If you do not wish to retain a copy of the original software, include the patch_save_files option in the swinstall command above: -x patch_save_files=false WARNING: If patch_save_files is false when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. For future reference, the contents of the PHCO_28166.text file is available in the product readme: swlist -l product -a readme -d @ /tmp/PHCO_28166.depot To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHCO_28166.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: None