Patch Name: PHSS_32015

Patch Description: s700_800 10.20 OV OB4.10 patch - CORE packet

Creation Date: 04/11/22

Post Date: 04/11/23

Hardware Platforms - OS Releases:
	s700: 10.20
	s800: 10.20

Products:
	OmniBackII A.04.10

Filesets:
	OMNIBACK-II.OMNI-CORE-IS,A.04.10
	OMNIBACK-II.OMNI-JPN-LS-P,A.04.10
	OMNIBACK-II.OMNI-DEU-LS-P,A.04.10
	OMNIBACK-II.OMNI-INTEG-P,A.04.10
	OMNIBACK-II.OMNI-FRA-LS-P,A.04.10

Automatic Reboot?: No

Status: General Release

Critical: No

Path Name: /hp-ux_patches/s700_800/10.X/PHSS_32015

Symptoms:
	PHSS_32015:
	Change Request: QXCR1000099278
	  In the restore GUI the following message is displayed:

	  "Bad catalog access for message #10928 in set 12."

	Change Request: H555013196
	  Installing/upgrading clients via the support secure
	  shell (SSH) does not complete successfully.

	Change Request: H555013460
	  During a SAP backup, the "omnisap" parameters can be
	  seen in "ps" command output.

	Change Request: H555013571
	  On certain versions of Linux, the "(x)inetd" needs to be
	  restarted to force it to re-read the configuration.

	PHSS_30339:
	Change Request: H555010873
	  Session pre-exec and post-exec scripts have to reside
	  in </lbin> directory.

	Change Request: H555010979
	  "omnib" command fails with "bad options" error.

	Change Request: H555011653
	  The "upgrade_cfg -sap" command removes SIDs from the
	  "INSTANCE_LIST" file.

	Change Request: H555012036
	  Intermittently INET reports that it cannot start a
	  program (|29| Illegal seek).

	PHSS_29409:
	Change Request: H555010418
	  4.5.8 version of the "uname" binary from the
	  "coreutils" package causes a failure of agent
	  installation on Linux hosts.

	Change Request: H555010421
	  Remote session pre- and post-exec scripts fail
	  on Linux clients with the following error message:

	   "|Critical| From: BSM@<hostname> "<object>"
	   Time: <time> Session remote exec script <object>
	   on host <hostname> failed. Exit code = 1076312584."

	Change Request: H555010540
	  Host is imported even though it is listed
	  in the "deny_hosts" file.

	Change Request: H555010639
	  In some special cases during a restore, two devices
	  require the same medium simultaneously which causes
	  a restore to stop responding.

	PHSS_29137:
	Change Request: H555009102
	  OmniBack II backs up "pseudo" file systems like
	  "procfs", "autofs", "namefs" etc twice.

	Change Request: H555009907
	  Autoconfiguration of NEC libraries fails.

	Change Request: H555010282
	  If Solaris OS uses only "/etc/hosts" file for
	  name resolving ".util HOSTNAME" command fails
	  with error:

	   "*** Can't find server name for address
	    127.0.0.1: No response from server
	    *** Default servers are not available."

	Change Request: 8606299444
	  Executing "Check Installation" results in the
	  following error:

	  "|Critical|  |110:1043| Hostname reported by client
	   (client_name) does not match with its name in the
	   Cell Manager configuration files (client_name).

	   |Critical| <client_name>  Update of client system
	   <client name> FAILED! "

	PHSS_28584:
	Change Request: H555009621
	  Backup of Oracle8 database reports the following
	  warning:

	   "Warning: Invalid environment setting".

	Change Request: H555008622
	  Installation and configuration packages do not exist
	  for IBM AIX 5L operating system.

	PHSS_28232:
	Change Request: H555008681
	  When using command "omnidb -help", -msese argument is
	  not displayed.

	Change Request: H555008856
	  When restoring Object with using "Interval",
	  in the restore Graphical User Interface
	  the following message is displayed:

	  "Bad catalog access for message #10928 in set 12".

	Change Request: H555008900
	  In Cell Manager environment with large number of
	  clients, when operations like check_installation or
	  add_components are performed at the same time on all
	  clients, the error message appears for the linux
	  clients:

	    "|Critical| <host>: Unsupported architecture/OS type
	       (<host> <time>)
	       Skipping client!".

	Change Request: H555008977
	  During Oracle Split Mirror Backup Data Protector
	  displays error:

	   "Exec_SVRMGRL|5|: /var/opt/omni/tmp/smb.<PID>:
	    cannot create
	    Exec_SVRMGRL|5|: /var/opt/omni/tmp/smb.<PID>:
	    cannot open
	    |Major| From: ob2rman.exe@<hostname> "<barlist_name>"
	     Time: mm/dd/yy hh:mm:ss
	    The Production Database is not in automatic archival
	    mode.
	    Please set log_archive_start = true in your init.ora
	    file".

	Change Request: H555009015
	  Check Installation feature fails for Red Hat 8.0 Linux
	  clients.

	Change Request: H555009084
	  Installation of Red Hat 8.0 Linux client fails.

	Change Request: H555008950
	  After running "omnidbutil -cdbsync" the Catalog
	  Database (CDB) is lost.

	Change Request: H555009435
	  Restore session on HP-UX with vxfs 3 reports error:

	    "Cannot restore ACLs"

	  for every file restored.

	PHSS_27456:
	Change Request: H555007590
	  OmniBack II does not check into what slot mediums were
	  entered when mount request is confirmed.

	Change Request: H555008020
	  "Restore to another instance field" is missing in
	  SQL 2000 restore context.

	Change Request: H555008511
	  Data protection and catalog protection date for same
	  object differs for one day.

	Change Request: 8606223711
	  The current link in the Info menu is labeled
	  'OmniBack II FAQ' and it points to:

	    http://ovweb3.external.hp.com/ovfaq

	Change Request: 8606241727
	  Upgrade fails on non HP-UX UNIX clients if OmniBack II
	  port is not default.

	PHSS_26349:
	Change Request: H555007218
	  When restoring files in an interval that
	  does not include full backup the following error
	  appears:

	     "DB unknown error".

	PHSS_25964:
	Change Request: H555006771
	  Load balancing is not working properly.

	Change Request: 8606227839
	  Omniback II does not support Ext3 filesystem on
	  Linux systems.

	Change Request: H555006968
	  Autorecover fails with:

	   "Current medium is refused for restore. Aborting!".

	Change Request: H555006942
	  OmniBack II A.04.10 GUI abnormally ends when trying to
	  connect to OmniBack II A.04.00 Cell Manager.

Defect Description:
	PHSS_32015:
	Change Request: QXCR1000099278
	  Message 10928 in set 12 is not added to the japanese
	  catalog.

	  Resolution:
	  English message is added to the catalog.

	Change Request: H555013196
	  SSH connection is not implemented in OmniBack II.

	  Resolution:
	  The "OB2_SSH_ENABLED" environment variable is introduced
	  in the "omnirc" file. When set to "1", SSH is used to
	  install/upgrade clients. It is assumed that SSH is
	  configured and that both systems have public/private
	  key exchange enabled.

	Change Request: H555013460
	  The parameters are not concealed.

	  Resolution:
	  The "omnisap" parameters are preceded by a long empty
	  option when started from "inet". After the start,
	  "omnisap" changes its title, concealing the parameters.

	Change Request: H555013571
	  Part of the script responsible for updating the
	  "(x)inetd" has older formulation.

	  Resolution:
	  The script is updated.

	PHSS_30339:
	Change Request: H555010873
	  Because of Data Protector design session pre-exec and
	  post-exec scripts have to reside in </lbin> directory.

	  Resolution:
	  By adding OB2INETSCRIPTEXECFULLPATH=1 to the .omnirc
	  file this limitation is removed.

	Change Request: H555010979
	  Literal 'Weeks' in omni.cat is written in German
	  language and therefore not found.

	  Resolution:
	  German word for 'Weeks' replaced with English word.

	Change Request: H555011653
	  The "upgrade_cfg" command tries to create a new
	  "INSTANCE_LIST" file every time it is started, but it
	  should do this only the first time it is started since
	  the "data_servers" file is removed after the first
	  configuration and because "upgrade_cfg" was unable to
	  find the "data_servers" file it forced empty
	  instances into the "INSTANCE_LIST" file.

	  Resolution:
	  "upgrade_cfg" creates the "INSTANCE_LIST" file on the
	  Cell Manager based on the "data_servers" file of the
	  client only the first time it is started.

	Change Request: H555012036
	  Sometimes INET detects that started program has finished,
	  but the return code is not yet available.

	  Resolution:
	  The time that INET is waiting for the program to provide a
	  return code after it has finished, can be configured
	  using the OB2EXECTIMEOUT environment variable in the
	  .omnirc file.

	PHSS_29409:
	Change Request: H555010418
	  Installation of Disk Agent and Media Agent, import
	  or management of Linux hosts, which have the 4.5.8
	  version of the "uname" binary from the "coreutils"
	  package, cannot be performed.

	  Resolution:
	  Installation of Disk Agent and Media Agent, import
	  or management of Linux hosts, which have the 4.5.8
	  version of the "uname" binary from the "coreutils"
	  package, functions properly.

	Change Request: H555010421
	  Inet ends abnormally on Linux clients when executing
	  remote session pre- and post-exec scripts.

	  Resolution:
	  Remote session pre- and post-exec scripts execute
	  correctly on Linux clients.

	Change Request: H555010540
	  Hostname comparison is case sensitive.

	  Resolution:
	  Hostname comparison is case insensitive.

	Change Request: H555010639
	  When restoring a full restore chain from a single
	  medium using different logical devices, two Media
	  Agents can become possibly deadlocked over one medium.

	  Resolution:
	  The following warning text is added to indicate such
	  situations:

	   "Devices <object> and <object> are possibly deadlocked
	   over medium <object>. For the restore to succeed,
	   abort and run the restore session using only one
	   device. This is accomplished by using the "Change..."
	   button under the "Devices" tab to change one of the
	   devices to match the other one."

	PHSS_29137:
	Change Request: H555009102
	  Output from "mount" command is used directly, without
	  checking file system type.

	  Resolution:
	  Filter mechanism is added in order to exclude "pseudo"
	  file systems from list of mounpoints.

	Change Request: H555009907
	  Device Browser can not recognize NEC Libraries because
	  "scsitab" file does not have entry for it.

	  Resolution:
	  New entry for NEC libraries is added in "scsitab" file.

	Change Request: H555010282
	  "nslookup" command on Solaris OS does not look
	  for hostnames in "/etc/hosts" file.

	  Resolution:
	  ".util" script is changed in order to return
	  hostname from "/etc/defaultdomain" and
	  "/etc/hosts" if "nslookup" command can not resolve
	  hostname. If "/etc/defaultdomain" file does not
	  exist ".util" returns only hostname from
	  "/etc/hosts" file.

	Change Request: 8606299444
	  If the system uses only "/etc/hosts" file for name
	  resolving and the hostname is in uppercase
	  the OmniBack II name resolving does not work correctly.

	  Resolution:
	  The OmniBack II name resolving procedure is changed
	  in order to correctly handle hostnames written in
	  uppercase.

	PHSS_28584:
	Change Request: H555009621
	  Command "util_cmd -getopt" outputs random data in cases
	  when empty "Enviroment" subsection in /etc/hosts is
	  found. This happens because random data is collected
	  from uninitialized buffer filled during the previous
	  execution of util_cmd.

	  Resolution:
	  Buffer containing "-getopt" data is re-initialized
	  before every execution.

	Change Request: H555008622
	  Installation and configuration packages do not exist
	  for IBM AIX 5L operating system.

	  Resolution:
	  Installation and configuration packages are added
	  for IBM AIX 5L operating system.

	PHSS_28232:
	Change Request: H555008681
	  Argument "-msese" is missing in the catalog.

	  Resolution:
	  Argument "-msese" is added in the catalog.

	Change Request: H555008856
	  Message for restoring Object with using "Interval"
	  is not added to Japanese message catalog.

	  Resolution:
	  Message catalog is updated.

	Change Request: H555008900
	  When adding components to more Linux clients the
	  variable which holds the index to machine type is
	  changing, so the machine type matching is not
	  successful.

	  Resolution:
	  Algorithm for unix platform is changed.

	Change Request: H555008977
	  The /var/opt/omni/tmp/smb.(PID) file is not removed
	  at the completion of the smb_common.sh script.
	  When the PID is duplicated then the new
	  /var/opt/omni/tmp/smb.(PID) file can not be created.

	  Resolution:
	  The /var/opt/omni/tmp/smb.(PID) file is removed
	  at the completion of the smb_common.sh script.

	  Part of SSPUX410_047.

	Change Request: H555009015
	  Red Hat 8.0 Linux command "nslookup" outputs an extra
	  message which causes Check Installation to fail.

	  Resolution:
	  "-silent" option is used when running Check Installation
	  feature on Red Hat 8.0 Linux clients.

	Change Request: H555009084
	  Default installation of Red Hat 8.0 Linux operating
	  system does not contain "uncompress" utility.

	  Resolution:
	  Data Protector installation on Red Hat 8.0 Linux uses
	  one of the default decompressing utilities.

	Change Request: H555008950
	  If "omnidbutil -cdbsync" is started on the
	  Manager-of-Managers client, local Media Management
	  Database (MMDB) is used for database synchronization.

	  Resolution:
	  If command "omnidbutil -cdbsync" is running
	  on a Manager of Mangers(MOM) client, it issues
	  an error message and stops the operation.

	Change Request: H555009435
	  While restoring Minor error is reported for every file.

	  Resolution:
	  Message "Destination file system does not support ACLs!"
	  is reported once, and then further occurences of the
	  error message are suppressed.

	PHSS_27456:
	Change Request: H555007590
	  Before loading medium on mount request confirmation
	  database is not checked properly.

	  Resolution:
	  On mount request confirmation database is checked
	  properly.

	Change Request: H555008020
	  "Restore to another instance" combo box for displaying
	  instances installed on SQL Server 2000 is missing.

	  Resolution:
	  "Restore to another instance" combo box is added.

	Change Request: H555008511
	  Data protection value is improperly calculated.

	  Resolution:
	  Data protection calculation is improved.

	Change Request: 8606223711
	  This page is outdated. It must be labeled 'eCare
	  Support' and it must point to:

	    http://support.openview.hp.com/support.jsp?FromPROD
	    =ob_4_1

	  Resolution:
	  Label and links are fixed.

	Change Request: 8606241727
	  Check for echo command is not done correctly.

	  Resolution:
	  Checking mechanism is corrected.

	PHSS_26349:
	Change Request: H555007218
	  Selecting files for restore within interval that
	  does not include the full backup will trigger
	  an error.

	  Resolution:
	  The error is marked and send to the Graphical User
	  Interface (GUI), which displays a message:

	    "You have chosen an interval which
	     doesn't include all the sessions needed to
	     compose a full restore chain. Please reconnect
	     to the Cell Server."

	PHSS_25964:
	Change Request: H555006771
	  There is no warning reported when one creates a
	  datalist or a barlist with load balancing enabled and
	  minimum number of devices greater than number of
	  configured logical devices.

	  Resolution:
	  New warning is added.

	Change Request: 8606227839
	  Omniback II does not support Ext3 filesystem on
	  Linux systems.

	  Resolution:
	  Omniback II supports Ext3 filesystem on Linux systems.

	Change Request: H555006968
	  There are duplicated strings in the messages reported
	  by OmniBack during autorecover.

	  Resolution:
	  Duplicated messages are removed from message catalog.

	Change Request: H555006942
	  Any attempt to establish connection to OmniBack II
	  A.04.00 Cell Manager from OmniBack II A.04.10 GUI,
	  when having no permissions to do so, results in
	  core dump of OmniBack II A.04.10 GUI.

	  Resolution:
	  Message "No permission" is displayed when one tries to
	  connect to a system where one does not have
	  sufficient permissions.

	  Part of SSPUX410_004.

SR:
	QXCR1000099278 H555013460 H555013196 H555013571
	H555010979 H555010873 H555012036 H555011653
	H555010540 H555010639 H555010418 H555010421
	H555009907 H555009981 H555009102 8606299444
	H555010282 H555009621 H555008622 H555008891
	H555008856 H555008667 H555008686 H555009015
	H555008977 H555008900 H555008632 H555008641
	H555008651 H555009435 H555009084 H555008950
	H555008681 H555008807 H555008020 8606241727
	8606223711 H555007590 H555008511 H555007218
	8606227839 H555006942 H555006968 H555006771

Patch Files:
	/opt/omni/lbin/bmsetup
	/opt/omni/lbin/.CII_CORE-IS
	/opt/omni/databases/utils/sun/sparc/solaris-7/utils.tar
	/opt/omni/databases/utils/sun/sparc/solaris-26/utils.tar
	/opt/omni/databases/utils/siemens/r400/sinix/utils.tar
	/opt/omni/databases/utils/sgi/mips/irix-62/utils.tar
	/opt/omni/databases/utils/sequent/i386/dynix/utils.tar
	/opt/omni/databases/utils/sco/i386/unixware/utils.tar
	/opt/omni/databases/utils/sco/i386/sco_sv/utils.tar
	/opt/omni/databases/utils/ncr/i386/mp-ras/utils.tar
	/opt/omni/databases/utils/ibm/rs6000/aix-51/utils.tar
	/opt/omni/databases/utils/ibm/rs6000/aix-42/utils.tar
	/opt/omni/databases/utils/hp/s800/hp-ux-11/utils.tar
	/opt/omni/databases/utils/hp/s800/hp-ux-1020/utils.tar
	/opt/omni/databases/utils/gpl/i386/linux-60/utils.tar
	/opt/omni/databases/utils/dec/alpha/osf1-4/utils.tar
	/opt/omni/databases/vendor/fra_ls/hp/s800/hp-ux-11/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/fra_ls/hp/s800/hp-ux-11/A.04.10/
		require.dat
	/opt/omni/databases/vendor/fra_ls/hp/s800/hp-ux-1020/
		A.04.10/packet.Z
	/opt/omni/databases/vendor/fra_ls/hp/s800/hp-ux-1020/
		A.04.10/require.dat
	/opt/omni/databases/vendor/deu_ls/hp/s800/hp-ux-11/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/deu_ls/hp/s800/hp-ux-1020/
		A.04.10/packet.Z
	/opt/omni/databases/vendor/integ/sun/sparc/solaris-26/
		A.04.10/packet.Z
	/opt/omni/databases/vendor/integ/ibm/rs6000/aix-51/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/integ/ibm/rs6000/aix-51/A.04.10/
		require.dat
	/opt/omni/databases/vendor/integ/ibm/rs6000/aix-42/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/integ/hp/s800/hp-ux-11/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/integ/hp/s800/hp-ux-1020/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/integ/gpl/i386/linux-60/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/integ/dec/alpha/osf1-4/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/integ/dec/alpha/osf1-4/A.04.10/
		require.dat
	/opt/omni/databases/vendor/jpn_ls/hp/s800/hp-ux-11/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/jpn_ls/hp/s800/hp-ux-1020/
		A.04.10/packet.Z
	/opt/omni/databases/vendor/omnicf/sgi/mips/irix-62/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/omnicf/sun/sparc/solaris-26/
		A.04.10/packet.Z
	/opt/omni/databases/vendor/omnicf/siemens/r400/sinix/
		A.04.10/packet.Z
	/opt/omni/databases/vendor/omnicf/sequent/i386/dynix/
		A.04.10/packet.Z
	/opt/omni/databases/vendor/omnicf/sco/i386/unixware/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/omnicf/sco/i386/sco_sv/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/omnicf/ncr/i386/mp-ras/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/omnicf/ibm/rs6000/aix-51/A.04.10/
		require.dat
	/opt/omni/databases/vendor/omnicf/ibm/rs6000/aix-51/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/omnicf/ibm/rs6000/aix-42/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/omnicf/hp/s800/hp-ux-11/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/omnicf/hp/s800/hp-ux-1020/
		A.04.10/packet.Z
	/opt/omni/databases/vendor/omnicf/gpl/i386/linux-60/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/omnicf/dec/alpha/osf1-4/A.04.10/
		packet.Z

what(1) Output:
	/opt/omni/lbin/bmsetup:
		HP OpenView OmniBack II A.04.10; internal build PHSS
			_32015/PHSS_32016, built on Tue Oct 19 16:28
			:06 2004
	/opt/omni/lbin/.CII_CORE-IS:
		None
	/opt/omni/databases/utils/sun/sparc/solaris-7/utils.tar:
		None
	/opt/omni/databases/utils/sun/sparc/solaris-26/utils.tar:
		None
	/opt/omni/databases/utils/siemens/r400/sinix/utils.tar:
		None
	/opt/omni/databases/utils/sgi/mips/irix-62/utils.tar:
		None
	/opt/omni/databases/utils/sequent/i386/dynix/utils.tar:
		None
	/opt/omni/databases/utils/sco/i386/unixware/utils.tar:
		None
	/opt/omni/databases/utils/sco/i386/sco_sv/utils.tar:
		None
	/opt/omni/databases/utils/ncr/i386/mp-ras/utils.tar:
		None
	/opt/omni/databases/utils/ibm/rs6000/aix-51/utils.tar:
		None
	/opt/omni/databases/utils/ibm/rs6000/aix-42/utils.tar:
		None
	/opt/omni/databases/utils/hp/s800/hp-ux-11/utils.tar:
		None
	/opt/omni/databases/utils/hp/s800/hp-ux-1020/utils.tar:
		None
	/opt/omni/databases/utils/gpl/i386/linux-60/utils.tar:
		None
	/opt/omni/databases/utils/dec/alpha/osf1-4/utils.tar:
		None
	/opt/omni/databases/vendor/fra_ls/hp/s800/hp-ux-11/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/fra_ls/hp/s800/hp-ux-11/A.04.10/
		require.dat:
		None
	/opt/omni/databases/vendor/fra_ls/hp/s800/hp-ux-1020/
		A.04.10/packet.Z:
		None
	/opt/omni/databases/vendor/fra_ls/hp/s800/hp-ux-1020/
		A.04.10/require.dat:
		None
	/opt/omni/databases/vendor/deu_ls/hp/s800/hp-ux-11/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/deu_ls/hp/s800/hp-ux-1020/
		A.04.10/packet.Z:
		None
	/opt/omni/databases/vendor/integ/sun/sparc/solaris-26/
		A.04.10/packet.Z:
		None
	/opt/omni/databases/vendor/integ/ibm/rs6000/aix-51/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/integ/ibm/rs6000/aix-51/A.04.10/
		require.dat:
		None
	/opt/omni/databases/vendor/integ/ibm/rs6000/aix-42/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/integ/hp/s800/hp-ux-11/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/integ/hp/s800/hp-ux-1020/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/integ/gpl/i386/linux-60/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/integ/dec/alpha/osf1-4/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/integ/dec/alpha/osf1-4/A.04.10/
		require.dat:
		None
	/opt/omni/databases/vendor/jpn_ls/hp/s800/hp-ux-11/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/jpn_ls/hp/s800/hp-ux-1020/
		A.04.10/packet.Z:
		None
	/opt/omni/databases/vendor/omnicf/sgi/mips/irix-62/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/omnicf/sun/sparc/solaris-26/
		A.04.10/packet.Z:
		None
	/opt/omni/databases/vendor/omnicf/siemens/r400/sinix/
		A.04.10/packet.Z:
		None
	/opt/omni/databases/vendor/omnicf/sequent/i386/dynix/
		A.04.10/packet.Z:
		None
	/opt/omni/databases/vendor/omnicf/sco/i386/unixware/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/omnicf/sco/i386/sco_sv/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/omnicf/ncr/i386/mp-ras/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/omnicf/ibm/rs6000/aix-51/A.04.10/
		require.dat:
		None
	/opt/omni/databases/vendor/omnicf/ibm/rs6000/aix-51/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/omnicf/ibm/rs6000/aix-42/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/omnicf/hp/s800/hp-ux-11/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/omnicf/hp/s800/hp-ux-1020/
		A.04.10/packet.Z:
		None
	/opt/omni/databases/vendor/omnicf/gpl/i386/linux-60/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/omnicf/dec/alpha/osf1-4/A.04.10/
		packet.Z:
		None

cksum(1) Output:
	3820782578 1869235 /opt/omni/databases/vendor/omnicf/dec/
		alpha/osf1-4/A.04.10/packet.Z
	3965687309 1378679 /opt/omni/databases/vendor/omnicf/gpl/
		i386/linux-60/A.04.10/packet.Z
	349272684 1773165 /opt/omni/databases/vendor/omnicf/hp/s800/
		hp-ux-1020/A.04.10/packet.Z
	3682586438 1770007 /opt/omni/databases/vendor/omnicf/hp/
		s800/hp-ux-11/A.04.10/packet.Z
	46937151 1640789 /opt/omni/databases/vendor/omnicf/ibm/
		rs6000/aix-42/A.04.10/packet.Z
	1351761271 18 /opt/omni/databases/vendor/omnicf/ibm/rs6000/
		aix-51/A.04.10/require.dat
	29068185 1650865 /opt/omni/databases/vendor/omnicf/ibm/
		rs6000/aix-51/A.04.10/packet.Z
	4133457961 1565831 /opt/omni/databases/vendor/omnicf/ncr/
		i386/mp-ras/A.04.10/packet.Z
	1202124885 1526221 /opt/omni/databases/vendor/omnicf/sco/
		i386/sco_sv/A.04.10/packet.Z
	4053135902 1499203 /opt/omni/databases/vendor/omnicf/sco/
		i386/unixware/A.04.10/packet.Z
	3206128836 1540527 /opt/omni/databases/vendor/omnicf/
		sequent/i386/dynix/A.04.10/packet.Z
	3997184816 1810978 /opt/omni/databases/vendor/omnicf/
		siemens/r400/sinix/A.04.10/packet.Z
	2956730226 1624807 /opt/omni/databases/vendor/omnicf/sun/
		sparc/solaris-26/A.04.10/packet.Z
	2663746643 2250122 /opt/omni/databases/vendor/omnicf/sgi/
		mips/irix-62/A.04.10/packet.Z
	2001725455 13239999 /opt/omni/databases/vendor/jpn_ls/hp/
		s800/hp-ux-1020/A.04.10/packet.Z
	1500234958 13240047 /opt/omni/databases/vendor/jpn_ls/hp/
		s800/hp-ux-11/A.04.10/packet.Z
	855174845 2287301 /opt/omni/databases/vendor/integ/dec/
		alpha/osf1-4/A.04.10/packet.Z
	2556158646 17 /opt/omni/databases/vendor/integ/dec/alpha/
		osf1-4/A.04.10/require.dat
	3171355306 1575642 /opt/omni/databases/vendor/integ/gpl/
		i386/linux-60/A.04.10/packet.Z
	2432301581 2325635 /opt/omni/databases/vendor/integ/hp/s800/
		hp-ux-1020/A.04.10/packet.Z
	2379711792 2325348 /opt/omni/databases/vendor/integ/hp/s800/
		hp-ux-11/A.04.10/packet.Z
	1053424923 2310595 /opt/omni/databases/vendor/integ/ibm/
		rs6000/aix-42/A.04.10/packet.Z
	2578039015 2323663 /opt/omni/databases/vendor/integ/ibm/
		rs6000/aix-51/A.04.10/packet.Z
	1351761271 18 /opt/omni/databases/vendor/integ/ibm/rs6000/
		aix-51/A.04.10/require.dat
	4124456967 2037165 /opt/omni/databases/vendor/integ/sun/
		sparc/solaris-26/A.04.10/packet.Z
	2182783641 12838249 /opt/omni/databases/vendor/deu_ls/hp/
		s800/hp-ux-1020/A.04.10/packet.Z
	104147628 12837386 /opt/omni/databases/vendor/deu_ls/hp/
		s800/hp-ux-11/A.04.10/packet.Z
	164031149 15770893 /opt/omni/databases/vendor/fra_ls/hp/
		s800/hp-ux-1020/A.04.10/packet.Z
	1615699968 27 /opt/omni/databases/vendor/fra_ls/hp/s800/
		hp-ux-1020/A.04.10/require.dat
	1656394447 15771443 /opt/omni/databases/vendor/fra_ls/hp/
		s800/hp-ux-11/A.04.10/packet.Z
	1735751903 19 /opt/omni/databases/vendor/fra_ls/hp/s800/
		hp-ux-11/A.04.10/require.dat
	3999542511 51200 /opt/omni/databases/utils/dec/alpha/osf1-4/
		utils.tar
	3867644828 51200 /opt/omni/databases/utils/gpl/i386/
		linux-60/utils.tar
	1152941383 40960 /opt/omni/databases/utils/hp/s800/
		hp-ux-1020/utils.tar
	1152941383 40960 /opt/omni/databases/utils/hp/s800/hp-ux-11/
		utils.tar
	3550848943 51200 /opt/omni/databases/utils/ibm/rs6000/
		aix-42/utils.tar
	3550848943 51200 /opt/omni/databases/utils/ibm/rs6000/
		aix-51/utils.tar
	1459754954 51200 /opt/omni/databases/utils/ncr/i386/mp-ras/
		utils.tar
	472814854 51200 /opt/omni/databases/utils/sco/i386/sco_sv/
		utils.tar
	472814854 51200 /opt/omni/databases/utils/sco/i386/unixware/
		utils.tar
	1459754954 51200 /opt/omni/databases/utils/sequent/i386/
		dynix/utils.tar
	3510794158 51200 /opt/omni/databases/utils/sgi/mips/irix-62/
		utils.tar
	2723478847 51200 /opt/omni/databases/utils/siemens/r400/
		sinix/utils.tar
	1867883458 51200 /opt/omni/databases/utils/sun/sparc/
		solaris-26/utils.tar
	320273293 51200 /opt/omni/databases/utils/sun/sparc/
		solaris-7/utils.tar
	3389364232 456411 /opt/omni/lbin/bmsetup
	274919816 71 /opt/omni/lbin/.CII_CORE-IS

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies:
	Some of the defect fixes contained in this patch
	depend on the following other patches or their
	successors in order to completely resolve the problem:

	PHSS_32022:
	SAP packet patch,
	Release Date: Late November 2004
	Change Request: H555013460
	PHSS_32022 is required for this defect fix.

	PHSS_30128:
	Cell Server (CS) packet patch,
	release Date: Available
	Change Request: H555010859
	PHSS_30128 is required for this defect fix.

Supersedes:
	PHSS_25964 PHSS_26349 PHSS_27456 PHSS_28232 PHSS_28584 PHSS_29137
	PHSS_29409 PHSS_30339

Equivalent Patches:
	PHSS_32016:
	s700: 11.00 11.11
	s800: 11.00 11.11

Patch Package Size: 110540 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHSS_32015

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHSS_32015.depot

	By default swinstall will archive the original software in 
	/var/adm/sw/patch/PHSS_32015.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE. 

	WARNING: If this file exists when a patch is installed, the 
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHSS_32015.text file to 
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHSS_32015.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
	PHSS_32015:
	NOTE!
	This Patch has to be installed on all Installation
	server hosts.

	Because the Core package is a part of all agents, all
	client packages need to be redistributed after this patch
	was installed on the installation server in order to
	enable the changes (Disk Agents, Media Agents, ...).

	
	Patch includes the following Site Specific Patches:
	   SSPUX410_004
	   SSPUX410_047

	A Site Specific Patch is a temporary hotfix that
	you might have received from HP Support if you
	have encountered a problem with Data Protector
	for which no General Release patch was or is
	available yet.

	If any newer Site Specific Patch - that is
	one with a higher number - for the CORE
	is installed on your system, then you
	must re-apply this SSP after installing
	this CORE patch.