Patch Name: PHSS_31055

Patch Description: s700_800 10.20 OV OB4.10 patch - MA packet

Creation Date: 04/09/02

Post Date: 04/09/30

Hardware Platforms - OS Releases:
	s700: 10.20
	s800: 10.20

Products:
	OmniBackII A.04.10

Filesets:
	OMNIBACK-II.OMNI-ACS-P,A.04.10
	OMNIBACK-II.OMNI-DAS-P,A.04.10
	OMNIBACK-II.OMNI-HPUX-P,A.04.10
	OMNIBACK-II.OMNI-OTHUX-P,A.04.10
	OMNIBACK-II.OMNI-FXMA-P,A.04.10
	OMNIBACK-II.OMNI-NDMP-P,A.04.10

Automatic Reboot?: No

Status: General Release

Critical: No

Path Name: /hp-ux_patches/s700_800/10.X/PHSS_31055

Symptoms:
	PHSS_31055:
	Change Request: 8606338014
	  OmniBack II does not return enough information when
	  dismounting a busy drive.

	Change Request: H555012788
	  Dump and restore are filtered out and are not shown in
	  the session report.

	Change Request: H555012886
	  On some NetApp servers, the Restore Media Agent (RMA)
	  NDMP does not report status to the Restore Session
	  Manager (RSM) and is consequently stopped after reaching
	  an inactivity time-out.

	Change Request: H555012981
	  Omniback II with the DAS Media Agent integration
	  can not dismount a busy drive.

	Change Request: H555013209
	  OmniBack II does not function with the IBM ULTRIUM-TD2
	  drive.

	Change Request: H555013648
	  OmniBack II has problems with unloading a cleaning tape
	  from drive on the HP A4845A library.

	PHSS_30141:
	Change Request: H555011185
	  NDMP Backup Media Agent fails with:

	   "|Critical| From: BSM@<host> "<object>" Time:<time>
	    |61:6002| Error receiving catalog data from the
	    BMA@<host> "<object>".
	       Ipc subsystem reports: IPC Read Error
	       System error: |10060| Connection timed out"

	Change Request: H555011248
	  Media Agent operations such as backup and format may
	  fail with the following error message while
	  initializing or opening a device:

	   "|Major| From: MMA@<hostname> "<object>" Time:<time>
	    |90:180| Cannot rewind medium. (Details unknown.)"

	Change Request: H555011284
	  Command "query" does not list LTO tapes.

	Change Request: H555011295
	  Direct Library Access does not work with ACS Media
	  Agent.

	Change Request: H555011613
	  If tape is already mounted in drive, OmniBack II
	  detects it as a cleaning tape and reports:

	   "|Normal| From: BMA-NDMP-ACSCleaning Tape detected."

	Change Request: H555011697
	  Media Agent fails if the "OB2TAPEALERT" environment
	  variable is set to 1 in the "omnirc" file.

	Change Request: H555011999
	  OmniBack II is sometimes not able to enter tapes from
	  mailslots on the MSL5000 library.

	Change Request: H555012177
	  When backing up large NDMP objects, greater than 2 TB
	  or when an estimate of reported bytes to be backed up
	  is greater then 2 TB (OmniBack II protocol
	  limitation), the Backup Session Manager (BSM) will
	  signal the Media Agent to quit if invalid values are
	  received.

	Change Request: H555012208
	  After installing a general release patch PHSS_29862,
	  the STK ACS integration does not work properly.

	Change Request: H555012237
	  A tape unloading fails with the following error message:

	   "|Major| From: BMA-NDMP@<hostname> "<object>" Time:
	    <time> |90:64| Cannot unload exchanger medium (|6| The
	    handle is invalid.)"

	Change Request: H555012361
	  Parallel scan on the same library fails with the
	  following error:

	   "|90:64| Cannot unload exchanger medium
	    |90:63| Can not load exchanger medium
	    |90:54| Can not open device."

	Change Request: H555012398
	  If connection between Media Agents (MMA, BMA, RMA, and
	  UMA) is broken, OmniBack II cannot unload a tape
	  and reports the following error:

	   "|Critical| From: BMA-ACS@<hostname> "<object>"
	    Time: <time> Cannot unload drive "0,0,10,2"
	    STATUS_DRIVE_IN_USE."

	PHSS_29861:
	Change Request: H555010400
	  Backup on Linux fails with:

	    "|Critical| From: UMA@<hostname> ""  Time:<time>
	     09:46:50
	     |90:59| /dev/sgi  Cannot open exchanger control
	      device (Unit is not ready.)"

	Change Request: H555010500
	  Data Protector can not initialize tape on AIX 5.1
	  client.

	Change Request: H555010607
	  Just before backup completes, the following is reported:

	    "|Major| From: BSM@<host> "<name>"  Time:<time>
	     |61:3003| Lost connection to BMA named "<name>"
	     on host <host> Ipc subsystem reports: "IPC Read Error
	     System error: |232| Connection reset by peer."

	Change Request: H555010615
	  When UMA command is used to move the cleaning tape
	  from or to slot, error message appears:

	    "|12:1012| Cannot access the file. System error:
	     |2| No such file or directory."

	Change Request: H555010787
	  Backup session with debugs enabled stops responding
	  when BSM or BMA debug file reaches 2GB in size.

	Change Request: H555010789
	  Sanconf utility incorrectly reads serial number from
	  the inquiry buffer and device configuration is
	  therefore not possible.

	Change Request: H555010804
	  When trailing filemark write operation fails, backup
	  media agent is not aborted and media is not marked
	  as poor.

	Change Request: H555010978
	  When device error occurs device error notifications
	  are not being sent.

	Change Request: H555010980
	  Backup session fails with error message:

	    "|Critical| From: BMA-NDMP-ACS@<host> "<dev>"
	     Time:<time>
	     StorageTek ACS error in "<dev>":
	     STATUS_SUCCESS".

	Change Request: H555011003
	  Backup operation fails during tape load or unload
	  with the following message:

	    "|Major| From: BMA|90:63|Cannot load exchanger medium
	     (logical unit is in process of becoming ready)".

	PHSS_28745:
	Change Request: H555009054
	  Backup fails with an error:

	  "|Critical| From: BMA@<host> "<device>" Time:<time>
	   |90:30| SM/MA protocol error => aborting"

	Change Request: H555009430
	   Sanconf does not recognize the device that does not
	   have the /dev/rmt/*mn file name standard.

	Change Request: H555009630
	  Restore session from physically write protected tapes
	  fails with following error message:

	   "|Major| From: RMA-NDMP@hostname.com <host> <time>
	    Cannot open device (The medium is Write Protected.)"

	Change Request: H555009873
	  Format of SuperDLT tape fails with an error:

	   "|Critical| From: <host> "datalist" <time>
	    |90:41|   Invalid device type specified (14) =>
	    aborting".

	Change Request: H555009914
	  TapeAlert functionality for detecting dirty drives is
	  disabled by default.

	Change Request: H555010030
	  During NDMP Backup Session Omniback II Database gets
	  corrupted, which can be detected by running a
	  "omnidbcheck -sibf" command .

	Change Request: H555010150
	  Backup session fails with an error:

	   "|Minor| From: <host> "datalist" <time>
	    |90:190|    Invalid format version of OmniBack
	    II medium."

	Change Request: H555010157
	  Device T9840 is not supported.

	Change Request: H555010199
	  NDMP restore of the appending backup fails on EMC Calera
	  systems.

	Change Request: H555010214
	  Autoconfiguration of Bnchmark VS160, Compaq VS160,
	  HP 2Gen LTO, Seagate DAT STDL42401LW drives and ADIC
	  FastStor 2 Autoloader, HP SS1016 Artic Wolf, HP MSL6000
	  Series, HP ESL9000 Series, SEAGATE DAT DAT 06241-xxx
	  and Spectra-Logic Gator libraries fails.

	Change Request: H555010277
	  There are inconsistencies in output of silo query
	  command. Comparing the output of  two commands: "omnimm
	  -repository" and "omnimm -silo_query" returuns different
	  results.

	Change Request: H555010317
	  Tape does not get unloaded at the end of the backup
	  session.

	Change Request: H555010332
	  Media Agent fails when it tries to connect to the STK
	  library if logical drive name is different from user id.

	Change Request: H555010392
	  ACS and DAS Media Agent do not create tape statistics
	  logs.

	PHSS_28333:
	Change Request: H555006826
	  Tape is not marked poor after append fails.

	Change Request: H555008826
	  Restore of incrementally backed up objects fails.

	Change Request: H555008870
	  "ssi.sh" script fails with error:

	    "/opt/omni/acs/ssi.sh|17|: grep:  not found.

	     Starting ACS daemons...
	     /opt/omni/acs/ssi.sh|4|: ps:  not found.
	     /opt/omni/acs/ssi.sh|4|: grep:  not found.
	     Problems starting ACS Event Logger
	     Unsuccessful in starting ACS daemons".

	Change Request: H555009018
	  OmniBack II is not gathering tape I/O operation
	  statistics.

	Change Request: H555009027
	  OmniBack II does not show the copy progress of tapes
	  in the GUI/CLI session report.

	Change Request: H555009078
	  Autoconfiguration of Mammoth2 device fails.

	Change Request: H555009095
	  When running backup and "omnimm -silo_query" command
	  at the same time, status of tapes that are used for
	  backup is set to "non resident".

	Change Request: H555009101
	  Initialization of Magneto Optical (MO) medium fails
	  with error:

	  "|Major| From: MMA@<host> "device"  Time: <time>
	   |90:129|    Medium has no capacity."

	Change Request: H555009139
	  Media Agent reports errors:

	  "|Minor| From: BMA@<host> "<device>"  Time: <time>
	   |90:197|  Could not read data (attribute
	   ID=AUX_OMNIBACK_MEDIA_HEADER) from cartridge memory ().

	   |Minor| From: BMA@<host> "<device>"  Time:<time>
	   |90:198|  Could not write data (attribute
	   ID=<Host attributes>) from cartridge memory ()."

	Change Request: H555009315
	  Backup fails with error:

	  "|Major| From: BMA@<host> "<device>" Time: <time>
	   |90:51|   |16| Device busy
	    Cannot write to device ((NULL))"

	Change Request: H555009407
	  OmniBack II is performing unnecessary cleanings on
	  DLT drives.

	Change Request: H555009859
	  Even if "OB2ACS_VOLUMEDRIVE_POOR=1" option is enabled
	  in ".omnirc" file, OmniBack II does not mark tape as
	  "Poor" in case tape mount operation fails with
	  ACS error: "STATUS_VOLUME_IN_DRIVE".

	PHSS_27458:
	Change Request: H555006734
	  When testing the drive cleaning configuration
	  using OmniBack II dirty drive simulation method
	  on DDS4 autoloader DAT40x6i/e the tape
	  unload fails with the following error message:

	    "[12:5]  Internal error in
	     ("/src/ma/pol/polmax.c /main/r31_split/3":565)
	    => process aborted
	    This is an unexpected condition and is likely
	    due to a combination of circumstances involving
	    both this product  and the operating system.
	    Report this error to your post-sales OmniBack II
	    Support Representative."

	Change Request: H555007993
	  devbra is not working properly with devices in
	  environments where "st_san_safe" kernel parameter
	  is enabled.

	Change Request: H555008050
	  Backup on LTO device on AIX platform fails with error:

	    "Cannot close after write problem. ([5] There is an
	     input or output error.)"

	Change Request: H555008179
	  New inquiry strings are needed for Compaq devices.

	Change Request: H555008242
	  During backup of NDMP integration Backup Media Agent
	  session completes with failures.

	Change Request: H555008328
	  Backup fails with error:

	    "[90:135]  Can not eject medium. ([5] I/O error)"

	Change Request: H555008428
	  Auto configuration of Overland Data Neo Series
	  LXN2000 and Neo Series LXN4000 with Quantum
	  SDLT220 tape drives does not work.

	Change Request: H555008496
	  OmniBack II displays incorrect message in Graphical
	  User Interface (GUI) when Medium header check
	  verification is performed:

	     "Medium verification completed, 0 errors found"

	Change Request: H555008504
	  Bulk eject functionality does not work after
	  installing patch PHSS_26357/PHSS_26358.

	Change Request: H555008634
	  OmniBack II does not unload tape at the end of the
	  backup.

	Change Request: B555014660
	  Sanconf does not distinguish between tape devices
	  having serial numbers longer than 10 digits.

	Change Request: H555008680
	  Cell Manager list and reformat does not work on
	  UNIX platforms.

	Change Request: H555008555
	  Backup to multihost device fails in case that
	  reconnect option is used.

	Change Request: H555008610
	  When during the backup end of tape is reached BMA
	  ends abnormally.

	Change Request: H555008655
	  Backup to file device fails with error:

	  "[Major] From: BMA@<host_name> "<device_name>"
	   Time: <dd.mm.yy hh:mm:ss>
	   [90:51]     /FileDevice
	    Cannot write to device ([27] File too large)"

	Change Request: H555008834
	  Backup to tape device on AIX platform fails with error:

	   "[Major] From: MMA@<host_name> "<device_name>"
	    Time: <dd.mm.yy hh:mm:ss>
	    [90:173]    REQUEST SENSE call failed.
	    Possible cleanme signal detection failure.
	    ([14] Bad address)"

	   "[Critical] From: MMA@<host_name> "device_name"
	    Time: <dd.mm.yy hh:mm:ss>
	    [90:43]     /dev/rmt0.1
	     Invalid physical device type => aborting"

	Change Request: H555008753
	  Incremental backup of big Net App filer volumes fails
	  if there are a lot of exclude parameters specified.

	Change Request: H555008728
	  Backup to direct access media fails with error:

	  "Cannot write to device
	   ([6] No such device or address)"

	Change Request: H555008608
	  ACS Media Agent does not retry on errors.

	Change Request: H555008747
	  Backup to 9840 device fails with error:

	  "Invalid physical device type => aborting."

	Change Request: 8606263710
	  Backup to tape drive fails if cleaning tape is loaded.

	PHSS_26357:
	Change Request: H555007269
	  Library robotic mechanism is not released after tape
	  eject.

	Change Request: H555007381
	  After failed backup session due to an I/O drive status
	  error, important information about the error in
	  debug.log file is missing.

	Change Request: H555007513
	  Medium verification error is reported after
	  successfully completed backup:

	    "Medium verification completed, 1 errors found".

	Change Request: H555007663
	  ACSLS query fails for STK 9940 media.

	Change Request: H555007700
	  Backup fails with an error:

	  "[Critical] From: BMA@<HOST> "<DEVICE>" Time:<TIME>
	   [90:30] SM/MA protocol error => aborting"

	Change Request: H555007739
	  After OmniBack II detects dirty drive and loads a
	  cleaning tape, option for medium header check aborts
	  the backup session.

	Change Request: H555007798
	  If 'InitOnLoosePolicy' is set to 0 and foreign tape
	  is loaded OmniBack II aborts backup session instead
	  of issuing a mount request.

	Change Request: B555013119
	  Sony DTF device does not work correctly.

	PHSS_26219:
	Change Request: H555006666
	  Omniback does not check if the medium is corrupted
	  at the end of the backup.

	Change Request: H555006790
	  DAS Media Agent cannot handle more than 15 drives.

	Change Request: H555006798
	  Querying GRAU libraries hangs.

	Change Request: H555006885
	  ACS Media Agent does not recognize LTO drives.

	Change Request: B555012905
	  NDMP Media Agent packages do not contain devbra.

	Change Request: H555006608
	  OmniBackII A.04.10 does not support HP VS80 and
	  Benchmark VS640 libraries.

	Change Request: H555007051
	  During backup following messages are reported:

	  [Normal] From: BSM@HostName "Datalist"  Time: <time>
	  [61:1011]  Received reconnect request from BMA@HostName
	  "Device".

	  [Normal] From: BSM@HostName "Datalist"  Time: <time>
	  BMA@HostName "Device" reconnected successfully.

Defect Description:
	PHSS_31055:
	Change Request: 8606338014
	  When a tape is left in a drive and the "Eject medium"
	  option is selected when drive is busy, OmniBack II does
	  not report to which slot the tape is returned.

	  Resolution:
	  New message is added to the session report:

	   "|Normal| From: MMA@<hostname> "<object>" Time: <time>
	    Unloading medium to slot 1 from device Tape0:0:1:0C".

	Change Request: H555012788
	  Message filtering function excludes all DUMP and RESTORE
	  messages not just the empty ones.

	  Resolution:
	  Message filtering function no longer excludes valid DUMP
	  and RESTORE messages.

	Change Request: H555012886
	  In case the NetApp filer reports the same value of data
	  restored until RMA time-out is reached, RMA does not
	  report Media Agent status to RSM and is stopped due to
	  inactivity.

	  Resolution:
	  The "OB2NDMPNOTIMEOUT" variable is introduced in the
	  "omnirc" file. When set to "1", it causes RMA-NDMP to
	  report status at least every 20 minutes and the session
	  completes.

	Change Request: H555012981
	  Omniback II does not properly map the ACI media type
	  and Omniback II media type.

	  Resolution:
	  If the "Eject medium to slot" option is selected while
	  configuring a library, Omniback II successfully
	  dismounts a busy drive.

	Change Request: H555013209
	  When trying to use the IBM ULTRIUM-TD2 drive, the
	  following message appears:

	   "Please check the device support matrix."

	  Resolution:
	  The IBM ULTRIUM-TD2 drive is supported.

	Change Request: H555013648
	  When OmniBack II tries to unload a tape from a drive, an
	  error "Hardware Error, Tape Drive" (KEY:4, ASC:40
	  ASCQ:02) occurs.

	  Resolution:
	  New environment variable "OB2CLNDISMOUNTSLEEP" is
	  introduced. If environment variable
	  "OB2CLNDISMOUNTSLEEP=sec" is set in the "omnirc" file,
	  OmniBack II sleeps for specified seconds (sec) before
	  trying to unload a cleaning tape.

	PHSS_30141:
	Change Request: H555011185
	  Catalog dynamic reallocation for filenames longer than
	  1024 characters is not working properly.

	  Resolution:
	  Catalog dynamic reallocation for filenames is improved.

	Change Request: H555011248
	  The error occurs during an FC adapter driver drive
	  initialization.

	  Resolution:
	  The "OB2FORCESCIOLSTOP" variable is introduced in the
	  "omnirc" file. If enabled, it overrides the "adapter
	  already in use" problem.

	Change Request: H555011284
	  Data Protector does not properly recognize LTO tapes.

	  Resolution:
	  Command "query" properly handles LTO tapes.

	Change Request: H555011295
	  "Direct Library Access" functionality is not
	  implemented for ACS Media Agent.

	  Resolution:
	  Functionality for ACS Media Agent is implemented.

	Change Request: H555011613
	  OmniBack II marks occupied tapes as cleaning tapes.

	  Resolution:
	  Error handling for occupied tape is changed. If the
	  environment variable "OB2ACS_VOLUMEDRIVE_POOR" is set
	  to 1 (OB2ACS_VOLUMEDRIVE_POOR=1), occupied tapes are
	  marked as poor and session does not fail.
	  If "OB2ACS_VOLUMEDRIVE_POOR" is set to 0
	  (OB2ACS_VOLUMEDRIVE_POOR=0), the session fails.

	Change Request: H555011697
	  OmniBack II does not properly send a command
	  for tape alert.

	  Resolution:
	  Tape Alert functionality is improved.

	Change Request: H555011999
	  OmniBack II tries to enter tapes while the picker is
	  still busy.

	  Resolution:
	  New environment variable OB2READELEMENTSTATUSRETRY=n
	  (n = number of retries) is introduced in the "omnirc"
	  file.

	Change Request: H555012177
	  The procedure for handling estimated and written bytes
	  has problems with some values reported from the NDMP
	  server.

	  Resolution:
	  The procedure for handling estimated and written bytes
	  is improved.

	Change Request: H555012208
	  If the "OB2USERID=1" environment variable is set in
	  the "omnirc" file, OmniBack II does not properly set
	  the user ID for the connection to the ACSLS server.

	  Resolution:
	  If the "OB2USERID=1" environment variable is set in
	  the "omnirc" file, OmniBack II uses a logical name of
	  a drive name for the user ID (ACSAPI_USER_ID).

	Change Request: H555012237
	  If the library picker is connected to the local system
	  and a drive is connected to the NDMP server, an
	  illegal SCSI operation is attempted during a NDMP tape
	  unloading.

	  Resolution:
	  The correct operation is performed during a NDMP tape
	  unloading.

	Change Request: H555012361
	  OmniBack II cannot handle multiple scans. Command
	  "Move Medium" fails. Possible error message is:

	   "Logical unit not ready, cause not reportable (ASC: 04
	    ASCQ: 00) Not ready to ready transition (Medium may
	    have changed) (ASC: 28 ASCQ: 00)."

	  Resolution:
	  Retries for command "Move Medium" are implemented in
	  case the command fails. Number of retries can be
	  increased through "omnirc" environment variables
	  "OB2MOUNTRETRY" and "OB2DISMOUNTRETRY".

	Change Request: H555012398
	  Second Utility Media Agent (UMA) cannot dismount a
	  tape from a drive because the tape is still locked by
	  the first UMA.

	  Resolution:
	  When connection between Media Agents is broken,
	  OmniBack II successfully unloads a tape from a drive.

	PHSS_29861:
	Change Request: H555010400
	  Data Protector is failing to access the robotics on
	  Linux. Ioctl function is unsuccessfully repeated 60
	  times and then it fails.

	  Resolution:
	  Device major number is checked with fstat, if it is
	  21 (sg device), SCSI command is passed with
	  SCTL_io_linux_SG_driver function. Sending SCSI command
	  with SCSI_IOCTL_SEND_COMMAND ioctl to sg is deprecated.

	Change Request: H555010500
	  When Data Protector tries to load the tape, Media agent
	  aborts session.

	  Resolution:
	  Data Protector successfully initializes tape.

	Change Request: H555010607
	  BMA closes too quickly and because of that it does not
	  send the close message to BSM.

	  Resolution:
	  An additional sleep with environment variable
	  OB2BMASLEEPBEFORECLOSE is introduced to allow BMA to
	  send close message successfully.

	Change Request: H555010615
	  OmniBack II does not handle error messages properly.

	  Resolution:
	  When cleaning tape is loaded into drive with UMA
	  command, OmniBack II reports:

	     "move: Cleaning cartridge installed."

	Change Request: H555010787
	  Binaries are not properly build.

	  Resolution:
	  Binaries are properly build.

	Change Request: H555010789
	  Serial numbers for drives are not read properly.
	  Because of this, devbra does not know how to combine
	  drives together with robotics.

	  Resolution:
	  SCTL_ReadElementStatusSerial is rewritten so that it
	  supports SCSI-2 and SCSI-3 specifications.

	  Part of SSPUX410_076.

	Change Request: H555010804
	  The failure of trailing filemark write is caused
	  by a hardware problem.The backup media agent error
	  handling in this very specific case is not adequate.

	  Resolution:
	  The media is marked as poor and BMA is aborted if the
	  backup fails on last FMwrite.

	Change Request: H555010978
	  Device error notifications are not sent even when
	  device error occurs. Device error notification sending
	  is not implemented in OmniBack II A.04.10.

	  Resolution:
	  Device error notification sending is implemented in
	  OmniBack II A.04.10.

	Change Request: H555010980
	  With patch PHSS_28745 user ID for accessing STK library
	  is changed. All ACS Media Agents now access to STK
	  library with unique user ID.

	  Resolution:
	  Unique user ID can be changed to logical drive name
	  with setting environment variable OB2USERID=1 in
	  .omnirc file.

	  Part of SSPUX410_081.

	Change Request: H555011003
	  If option "Load Port" is used on  ESL 9000 libraries
	  OmniBack can not load or unload the tape.

	  Resolution:
	  With new environment variables OB2MOUNTSLEEP and
	  OB2DISMOUNTSLEEP sleep in seconds before executing
	  load and unload command is added in .omnirc file.

	  Part of SSPUX410_080.

	PHSS_28745:
	Change Request: H555009054
	  In case that reconnect option is used for backup,
	  it is possible that Media Agent fails due to a
	  protocol error.

	  Resolution:
	  Protocol between Session Manager and Media Agent is
	  changed in order not to acknowledge normal formatted
	  messages.

	Change Request: H555009430
	  Only device files of the format /dev/rmt/*mn are
	  filtered in devlist_ux.c.

	  Resolution:
	  New environment variable OB2BROWSEALLDEVICES is
	  introduced in ".omnirc" file. Possible values are
	  0 (default) and 1. If set to 1 the function will
	  also browse the /dev/rmt/*n device files.

	Change Request: H555009630
	  The tape is unnecessarily checked for physical write
	  protection during Restore Session.

	  Resolution:
	  OmniBack II properly handles physically write protected
	  tapes.

	Change Request: H555009873
	  SuperDLT is not supported.

	  Resolution:
	  SuperDLT is added as supported device in OmniBack II
	  DAS Media Agent.

	Change Request: H555009914
	  TapeAlert functionality for detecting dirty drives is
	  disabled by default.

	  Resolution:
	  TapeAlert functionality for detecting dirty drives is
	  enabled by default.

	Change Request: H555010030
	  Meta files are removed although there are still object
	  versions in the Omniback II Database with reference to
	  those meta files.

	  Resolution:
	  Meta files are no longer removed if there are object
	  versions in the Omniback II Database with references
	  to them.

	Change Request: H555010150
	  Backup session on Linux Red Hat fails if IBM 3581 driver
	  is not installed.

	  Resolution:
	  In case that IBM 3581 driver is not installed on the
	  system, environment variable OB2NOIBM3581=1 must be
	  added in ".omnirc" file.

	Change Request: H555010157
	  Entry for T9840 and T9940 devices is missing from device
	  table.

	  Resolution:
	  Devices T9840 and T9940 are added to the device table.

	Change Request: H555010199
	  NDMP by default skips tape filemarks, but Celera
	  implements filemark read in NDMP protocol version 3
	  and  filemarks are not skipped.

	  Resolution:
	  By setting variable OB2NDMPFMV4=1 in ".omnirc" file
	  OmniBack  II properly handles filemark skip when
	  backup is appended.

	Change Request: H555010214
	  Autoconfiguration of Bnchmark VS160, Compaq VS160,
	  HP 2Gen LTO, Seagate DAT STDL42401LW drives and ADIC
	  FastStor 2 Autoloader, HP SS1016 Artic Wolf Lib,
	  HP MSL6000 Series Lib, HP ESL9000 Series Lib,
	  SEAGATE DAT DAT 06241-xxx and Spectra-Logic Gator
	  libraries fails because they are not supported by
	  Data Protector.

	  Resolution:
	  New entries are added in "scsitab" file in order to
	  support Bnchmark VS160, Compaq VS160, HP 2Gen LTO,
	  Seagate DAT STDL42401LW drives and ADIC FastStor 2
	  Autoloader, HP SS1016 Artic Wolf Lib, HP MSL6000
	  Series Lib, HP ESL9000 Series Lib, SEAGATE DAT DAT
	  06241-xxx and Spectra-Logic Gator libraries.

	Change Request: H555010277
	  omnimm -silo_query command returns invalid number of
	  media because every 1000th medium is counted twice.

	  Resolution:
	  Function returning the list and number of media
	  is changed.

	Change Request: H555010317
	  If connection between BMA and UMA is broken during
	  the backup and no IPC error is reported, BMA terminates
	  session when it fails to instruct UMA to unload the
	  tape.

	  Resolution:
	  New instance of UMA is started.

	Change Request: H555010332
	  All MA agents use logical drive names as user_id when
	  accessing a STK library. Library only accepts unique
	  user_id, so Omniback II MA should access it with a
	  unique user_id.

	  Resolution:
	  The user_id MA used to access the library has been
	  unified.

	Change Request: H555010392
	  Tape statistics logging is not implemented in ACS
	  and DAS Media Agent.

	  Resolution:
	  Functionality is implemented.

	  Part of SSPUX410_072.

	PHSS_28333:
	Change Request: H555006826
	  If append fails during positioning, the tape is not
	  marked poor.

	  Resolution:
	  Error handling is improved.

	Change Request: H555008826
	  Because of drive problems, Media Agent does not
	  position the tape to the right location.

	  Resolution:
	  The way Restore Media Agent finds the right position
	  on the tape has been changed. If you receive error
	  message:

	    "|Major|From RMA@<host> "<device>" time:<time>
	     |90:184| Cannot forward block. |Details unknown.|"

	  then set new environment variable OB2NOBLOCKSEEK in
	  .omnirc file to 1 .

	Change Request: H555008870
	  When started during the system startup, "ssi.sh"
	  script fails because environment variable PATH is
	  not set.

	  Resolution:
	  PATH is set in the "ssi.sh" script and works
	  correctly during the system startup.

	  Part of SSPUX410_045.

	Change Request: H555009018
	  Tape I/O operation statistics functionality is not
	  implemented in OmniBack II.

	  Resolution:
	  Tape I/O operation statistics functionality was added.
	  To enable it, add the new environment variable
	  "OB2TAPESTATISTICS" to the ".omnirc" file and switch
	  it on (OB2TAPESTATISTICS=1).
	  Tape I/O operation statistics is then logged in
	  "/var/opt/omni/log/tapestatistics.log" file.
	  The statistics consist of:
	   1. Errors corrected without substantial delay
	   2. Errors corrected with possible delays
	   3. Total rewrites or rereads
	   4. Total errors corrected
	   5. Total times correction algorithm processed
	   6. Total bytes processed
	   7. Total uncorrected errors

	  Part of SSPUX410_049.

	Change Request: H555009027
	  OmniBack II does not include 'show tape copy progress'
	  functionality.

	  Resolution:
	  This functionality is added. To enable it, add the
	  new environment variable "OB2COPYTAPEMSG=k"
	  in ".omnirc" file. OmniBack II then for every k-th
	  segment shows a message:

	  "|Normal| From: CMA-ACS@<hostname> "<device>"
	   Time: <time>
		 Copying segment k"

	Change Request: H555009078
	  The device autoconfiguration fails, because the drive
	  is not recognized.

	  Resolution:
	  Autoconfiguration "Product ID" string in scsitab file
	  is changed from "Mammoth2" to "MAMMOTH2".

	Change Request: H555009095
	  OmniBack II does not properly handle mounted tapes.

	  Resolution:
	  Tapes in home position and mounted tapes are handled
	  the same way. They are both considered 'resident'.

	Change Request: H555009101
	  In case that Media Agent host uses the old NIO SCSI
	  bus, OmniBack II is not able to get the capacity of
	  a mounted Magneto Optical (MO) medium.

	  Resolution:
	  Media Agent is improved to correctly get the
	  capacity of the MO medium.

	Change Request: H555009139
	  Read/write of Cartridge Memory on LTO devices does not
	  work properly.

	  Resolution:
	  Media Agent is improved to work correctly with
	  Cartridge Memory on LTO devices.

	Change Request: H555009315
	  In AIX SAN environment it is possible that a device
	  is not available for a couple of seconds due to other
	  activities in SAN environment. In such cases the
	  "write()" command fails with EBUSY error.

	  Resolution:
	  Retry is added in case of EBUSY error. Retry can be
	  configured with environment variables
	  OB2SPTRETRY (default 10 retries) and
	  OB2SPTSLEEP (default 10 seconds) in ".omnirc" file.

	  Part of SSPUX410_057.

	Change Request: H555009407
	  OmniBack II is performing cleaning of DLT drives in
	  case that cleaning light is on. But in some cases
	  this light is still on even after drive is cleaned
	  and OmniBack II repeats cleaning cycle.

	  Resolution:
	  New environment variable, "OB2DLTCLEANINGLIGHTCHECK"
	  is added in ".omnirc" file. By default it is set to
	  "0" and cleaning is not performed when cleaning light
	  is on. If variable is set to "1", cleaning is performed.

	Change Request: H555009859
	  OmniBack II is not designed to mark tape as occupied
	  when tape mounting fails with "STATUS_VOLUME_IN_DRIVE".

	  Resolution:
	  OmniBack II properly marks tape as "Poor" in case
	  when mount operation fails with ACS error:
	  "STATUS_VOLUME_IN_DRIVE".

	  Part of SSPUX410_058.

	PHSS_27458:
	Change Request: H555006734
	  When the devices automatically unloads, OmniBack II
	  tries to unload but fails since the device already
	  unloaded tape.

	  Resolution:
	  New environment variable OB2NOEJECTCLEANINGTAPE which
	  has to be set to 1 in omnirc file, was implemented in
	  order to prevent OmniBack II to unload the cleaning
	  tape.

	Change Request: H555007993
	  Enabled "st_san_safe" parameter causes incorrect
	  system handling for the devices with "rewind on close"
	  implemented. This causes devbra to return unusable
	  devices.

	  Resolution:
	  devbra is adapted in order to work properly when
	  "st_san_safe" kernel parameter is enabled.

	Change Request: H555008050
	  Media Agent on AIX platform does not handle End
	  of Medium correctly for LTO devices.

	  Resolution:
	  End of Medium handling is improved for LTO devices
	  on AIX platform.

	Change Request: H555008179
	  New inquiry strings are needed for Compaq devices.

	  Resolution:
	  New inquiry strings are added for Compaq devices.

	Change Request: H555008242
	  In case that NDMP backup contains large number of
	  files, Backup Media Agent uses large amount of memory.

	  Resolution:
	  Backup Media Agent memory usage is improved so it can
	  backup up to 5 million files.

	Change Request: H555008328
	  Sometimes it is possible that eject operation fails
	  after the medium header verification.

	  Resolution:
	  Additional medium rewind operation is added before the
	  offline operation.

	Change Request: H555008428
	  Auto configuration of Overland Data Neo Series
	  LXN2000 and Neo Series LXN4000with Quantum
	  SDLT220 tape drives does not work because of
	  inquiry strings missing.

	  Resolution:
	  Inquiry strings are added for auto configuration.

	Change Request: H555008496
	  Message is implying that medium verification has been
	  done although only the medium header sanity check has
	  been performed.

	  Resolution:
	  Message is changed to:

	    "Medium header verification completed".

	  Part of SSPUX410_028.

	Change Request: H555008504
	  When performing bulk eject media agent aborts session.

	  Resolution:
	  Ejecting tape from mailslot works properly.

	Change Request: H555008634
	  If during the backup connection between BMA and UMA
	  is broken and no IPC error is reported, BMA terminates
	  when it fails to instruct UMA to unload the tape.

	  Resolution:
	  New instance of UMA is started.

	Change Request: B555014660
	  Devbra and sanconf are limited to 10 character serial
	  numbers only. When there are devices with 12 digit
	  SN detected, devbra truncates the last two digits.
	  As a result, several physical devices are then treated
	  as one and the same device.

	  Resolution:
	  Devbra is using all digits of the device SN to
	  distinguish between devices.

	  Part of SSPUX410_040.

	Change Request: H555008680
	  Reading and accessing the Cell Manager info resulted
	  in xma ending abnormally.

	  Resolution:
	  Source code for updating Cell Manager info has been
	  modified slightly.

	Change Request: H555008555
	  Media Agent protocol is incorrect for the devices
	  with multi-host connection.

	  Resolution:
	  Media Agent protocol is improved for the devices using
	  multi-host connections.

	  Part of SSPUX41_031.

	Change Request: H555008610
	  Solaris Media Agent is not capable of handling SCSI
	  sense information bigger than 144 bytes.
	  Problem typically occurs in combination with certain
	  types of SAN FC switches/drivers.

	  Resolution:
	  Buffer receiving SCSI sense information is increased.

	  Part of SSPUX410_035.

	Change Request: H555008655
	  Media Agent is not able to write beyond 2GB limitation
	  on file devices.

	  Resolution:
	  The 2Gb limitation on file devices is increased.

	  Part of SSPUX410_037.

	Change Request: H555008834
	  OmniBack II does not support FC devices on
	  AIX platform.

	  Resolution:
	  Support for FC devices on AIX platform is added.

	  Part of SSPUX410_038.

	Change Request: H555008753
	  Ascii to Unicode conversions of large number of
	  filenames generate stack overflow while transferring
	  the catalog information.

	  Resolution:
	  Function for Ascii to Unicode conversion is replaced.

	  Part of SSPUX410_042.

	Change Request: H555008728
	  In case that backup to direct access devices contains
	  large number of small files, it is possible that
	  catalog size is bigger than space available on medium.
	  Because of this backup fails to write complete catalog
	  to the medium.

	  Resolution:
	  Calculation of space needed for catalog is improved in
	  order not to exceed available space.

	Change Request: H555008608
	  New values are returned by SN6000.

	  Resolution:
	  New returned values for SN6000 are supported.

	Change Request: H555008747
	  OmniBack II does not work correctly with 9840 device
	  which product ID starts with "T9840".

	  Resolution:
	  Media Agent is improved in order to support 9840
	  devices which product ID starts with "T9840".

	Change Request: 8606263710
	  Automatic cleaning does not work if library does not
	  have barcode support.

	  Resolution:
	  New OmniBack II environment variable is added:
	  OB2CLNSLOT. Variable has to be set on Media Agent host
	  and has to contain number of Cleaning slot configured
	  for the library.

	PHSS_26357:
	Change Request: H555007269
	  When split library in SAN environment is assigned to
	  2 systems and "omnimm -eject" is run on host B, host A
	  can no longer access the changer.

	  Resolution:
	  Library robotic mechanism is released after tape
	  eject.

	Change Request: H555007381
	  Not all information is written to the debug.log after
	  I/O drive status error occurs.

	  Resolution:
	  Information is added to the debug.log file.

	Change Request: H555007513
	  With OmniBack II A.04.00 release verification of DA
	  block part is introduced. In case that data length for
	  the data record is "0", verify reports an error.

	  Resolution:
	  Verify is changed in order to ignore "0" data length
	  for data record, because this does not influence data
	  restore.

	  Part of SSPUX410_016.

	Change Request: H555007663
	  In case that STK 9940 drives are configured as T9840,
	  query does not work correctly because OB2 expects that
	  those drives are configured as type 3590.

	  Resolution:
	  Configuration for STK 9940 is changed in order to be
	  recognized as T9840 media type.

	Change Request: H555007700
	  In case in which reconnect option is used for backup,
	  it is possible that Media Agent fails due to a protocol
	  error.

	  Resolution:
	  Protocol between Session Manager and Media Agent is
	  changed in order not to acknowledge normal formatted
	  messages.

	  Complete functionality of this fix will be available
	  when Cell Server patch PHSS_26353/PHSS_26354 is
	  installed - or successors of it.

	  Part of SSPUX410_017.

	Change Request: H555007739
	  Header verification can not handle a dirty drive
	  situation.

	  Resolution:
	  If OmniBack II detects cleaning tape medium header is
	  not checked before unloading.

	Change Request: H555007798
	  When loading a tape medium header check is run. If the
	  medium is foreign or blank OmniBack II aborts backup
	  session.

	  Resolution:
	  If loaded tape is foreign or blank OmniBack II does not
	  check medium header when closing device.

	Change Request: B555013119
	  In order for Sony DTF device to work correctly,
	  "OB2DBD=1" entry has to be added to omnirc file.

	  Resolution:
	  Entry for Sony DTF drive is updated in order to make
	  the device work correctly without omnirc entry.

	PHSS_26219:
	Change Request: H555006666
	  Medium header verification is not implemeted.

	  Resolution:
	  Environment variable OB2DISABLEHEADERCHECK is
	  introduced.
	  Medium header is checked by default. Setting the
	  variable to 1 in /opt/omni/.omnirc file turns the
	  functionality off.

	Change Request: H555006790
	  DAS Media Agent is checking incorrect environment
	  variable.

	  Resolution:
	  Setting environment variable OB2DASDRIVESTATUS2 to 1
	  in the /opt/omni/omnirc file makes usage of more than
	  15 drives possible.

	Change Request: H555006798
	  Query operation hangs when performed on GRAU
	  libraries with more than 1000 tapes.

	  Resolution:
	  Query operation can handle more than 1000 tapes
	  within GRAU library.

	Change Request: H555006885
	  LTO drives are not supported with Omniback ACS
	  integration.

	  Resolution:
	  Omniback ACS integration supports LTO drives.

	Change Request: B555012905
	  NDMP Media Agent packages do not contain devbra.

	  Resolution:
	  devbra is added to NDMP Media Agent packages.

	Change Request: H555006608
	  OmniBackII A.04.10 does not support HP VS80 and
	  Benchmark VS640 libraries.

	  Resolution:
	  OmniBackII A.04.10 supports HP VS80 and Benchmark VS640
	  libraries on HP-UX, Linux and Sun Solaris systems.

	  Part of SSPUX410_002.

	Change Request: H555007051
	  In case that reconnect option is used and OB2PORTRANGE
	  environment variable is set, it is possible that
	  reconnect occurs at the beginning of the session
	  due to incorrectly set timeout.

	  Resolution:
	  Timeout is set to correct value.

SR:
	H555012886 H555012788 H555012981 H555013648 H555013209
	8606338014 H555011613 H555012361 H555012208 H555011999
	H555012237 H555011284 H555011248 H555011185 H555011295
	H555012177 H555012398 H555011697 H555010978 H555010789
	H555010804 H555010615 H555010607 H555010980 H555011003
	H555010400 H555010500 H555010787 H555010332 H555009873
	H555010317 H555010157 H555010392 H555009430 H555010277
	H555009054 H555009630 H555010199 H555010030 H555009914
	H555010150 H555010214 H555009101 H555009859 H555009315
	H555009018 H555009027 H555009407 H555009139 H555006826
	H555008870 H555009095 H555008826 H555009078 H555008728
	H555008179 H555008747 H555008496 H555007993 8606263710
	B555014660 H555008050 H555008421 H555008610 H555008242
	H555008504 H555006734 H555008328 H555008634 H555008608
	H555008428 H555008662 H555008680 H555008834 H555008753
	H555008555 H555008655 B555013119 H555007739 H555007700
	H555007798 H555007513 H555007381 H555007663 H555007269
	B555012905 H555006885 H555006608 H555007051 H555006798
	H555006790 H555006666

Patch Files:
	/opt/omni/databases/vendor/ma/hp/s800/hp-ux-1020/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ma/hp/s800/hp-ux-11/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ma/gpl/i386/linux-60/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ma/ibm/rs6000/aix-42/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ma/sco/i386/sco_sv/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ma/sequent/i386/dynix/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ma/siemens/r400/sinix/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ma/sun/sparc/solaris-26/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/acs/hp/s800/hp-ux-11/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/acs/hp/s800/hp-ux-1020/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/acs/sun/sparc/solaris-26/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/acs/ibm/rs6000/aix-42/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/das/hp/s800/hp-ux-11/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/das/hp/s800/hp-ux-1020/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/das/ibm/rs6000/aix-42/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-1020/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-11/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ndmp/sun/sparc/solaris-7/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-1020/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-11/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/fxma/sun/sparc/solaris-26/
		A.04.10/packet.Z

what(1) Output:
	/opt/omni/databases/vendor/ma/hp/s800/hp-ux-1020/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/hp/s800/hp-ux-11/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/gpl/i386/linux-60/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/ibm/rs6000/aix-42/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/sco/i386/sco_sv/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/sequent/i386/dynix/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/siemens/r400/sinix/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/sun/sparc/solaris-26/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/acs/hp/s800/hp-ux-11/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/acs/hp/s800/hp-ux-1020/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/acs/sun/sparc/solaris-26/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/acs/ibm/rs6000/aix-42/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/das/hp/s800/hp-ux-11/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/das/hp/s800/hp-ux-1020/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/das/ibm/rs6000/aix-42/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-1020/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-11/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ndmp/sun/sparc/solaris-7/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-1020/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-11/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/fxma/sun/sparc/solaris-26/
		A.04.10/packet.Z:
		None

cksum(1) Output:
	409755705 2533603 /opt/omni/databases/vendor/ma/hp/s800/
		hp-ux-1020/A.04.10/packet.Z
	1943445766 2534031 /opt/omni/databases/vendor/ma/hp/s800/
		hp-ux-11/A.04.10/packet.Z
	2535991317 2090881 /opt/omni/databases/vendor/ma/gpl/i386/
		linux-60/A.04.10/packet.Z
	3359354203 2158941 /opt/omni/databases/vendor/ma/ibm/rs6000/
		aix-42/A.04.10/packet.Z
	4025130361 1892872 /opt/omni/databases/vendor/ma/sco/i386/
		sco_sv/A.04.10/packet.Z
	3178890692 2101773 /opt/omni/databases/vendor/ma/sequent/
		i386/dynix/A.04.10/packet.Z
	1518388550 2430487 /opt/omni/databases/vendor/ma/siemens/
		r400/sinix/A.04.10/packet.Z
	1469562801 2430831 /opt/omni/databases/vendor/ma/sun/sparc/
		solaris-26/A.04.10/packet.Z
	231762265 3110389 /opt/omni/databases/vendor/acs/hp/s800/
		hp-ux-11/A.04.10/packet.Z
	3728859059 3109115 /opt/omni/databases/vendor/acs/hp/s800/
		hp-ux-1020/A.04.10/packet.Z
	4081219596 3043067 /opt/omni/databases/vendor/acs/sun/sparc/
		solaris-26/A.04.10/packet.Z
	947366580 2731535 /opt/omni/databases/vendor/acs/ibm/rs6000/
		aix-42/A.04.10/packet.Z
	1734847230 2624925 /opt/omni/databases/vendor/das/hp/s800/
		hp-ux-11/A.04.10/packet.Z
	3853699548 2628971 /opt/omni/databases/vendor/das/hp/s800/
		hp-ux-1020/A.04.10/packet.Z
	1722838087 2576563 /opt/omni/databases/vendor/das/ibm/
		rs6000/aix-42/A.04.10/packet.Z
	3159143421 2984832 /opt/omni/databases/vendor/ndmp/hp/s800/
		hp-ux-1020/A.04.10/packet.Z
	39707447 2981897 /opt/omni/databases/vendor/ndmp/hp/s800/
		hp-ux-11/A.04.10/packet.Z
	2632594426 2804919 /opt/omni/databases/vendor/ndmp/sun/
		sparc/solaris-7/A.04.10/packet.Z
	2651785254 2986623 /opt/omni/databases/vendor/fxma/hp/s800/
		hp-ux-1020/A.04.10/packet.Z
	2902811532 2979345 /opt/omni/databases/vendor/fxma/hp/s800/
		hp-ux-11/A.04.10/packet.Z
	3477962440 2776232 /opt/omni/databases/vendor/fxma/sun/
		sparc/solaris-26/A.04.10/packet.Z

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies:
	If the Cell Server is running on HP-UX, then the
	Cell Server patch PHSS_30343/PHSS_30344 (or later)
	for HP-UX must be installed before this Media Agent
	patch. If this is not done, the connection between
	Media Agents and Cell Server will no longer work.

	In a mixed environment, if the Cell Server is running
	on Windows NT/2000, then Cell Server patch
	OMNIBACK_00106 (or later) must be installed at the
	same time.

	PHSS_30343:
	Cell Server (CS) packet patch,
	Release Date: Available
	Change Request: H555010787
	Change Request: H555007700
	Change Request: H555008242
	Change Request: H555008680
	Change Request: H555009054
	Change Request: H555010030
	PHSS_30343 is required for these defect fixes.

	PHSS_30348:
	Cell Console (CC) packet patch,
	Release Date: Available
	Change Request: B555014660
	Change Request: H555009430
	PHSS_30348 is required for these defect fixes.

Supersedes:
	PHSS_26219 PHSS_26357 PHSS_27458 PHSS_28333 PHSS_28745 PHSS_29861
	PHSS_30141

Equivalent Patches:
	PHSS_31056:
	s700: 11.00 11.11
	s800: 11.00 11.11

Patch Package Size: 51010 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHSS_31055

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHSS_31055.depot

	By default swinstall will archive the original software in 
	/var/adm/sw/patch/PHSS_31055.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE. 

	WARNING: If this file exists when a patch is installed, the 
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHSS_31055.text file to 
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHSS_31055.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
	PHSS_31055:
	NOTE!
	This Patch has to be installed on the Installation
	Server host.

	The OB2 Media Agent must be redistributed to the Media
	Agent client system(s) after the installation of the patch
	in order to get the fixes into effect.

	For distribution of the Media Agent, refer to the
	OmniBackII Installation guide.

	
	Patch includes the following Site Specific Patches:
	   SSPUX410_002
	   SSPUX410_016
	   SSPUX410_017
	   SSPUX410_028
	   SSPUX410_031
	   SSPUX410_035
	   SSPUX410_037
	   SSPUX410_038
	   SSPUX410_040
	   SSPUX410_042
	   SSPUX410_045
	   SSPUX410_049
	   SSPUX410_057
	   SSPUX410_058
	   SSPUX410_072
	   SSPUX410_076
	   SSPUX410_080
	   SSPUX410_081

	A Site Specific Patch is a temporary hotfix that
	you might have received from HP Support if you
	have encountered a problem with Data Protector
	for which no General Release patch was or is
	available yet.

	If any newer Site Specific Patch - that is
	one with a higher number - for the Cell Console
	is installed on your system, then you
	must re-apply this SSP after installing
	this Cell Console patch.