Patch Name: PHSS_31051

Patch Description: s700_800 10.20 OV OB4.10 patch - CS packet

Creation Date: 04/10/04

Post Date: 04/10/06

Hardware Platforms - OS Releases:
	s700: 10.20
	s800: 10.20

Products:
	OmniBackII A.04.10

Filesets:
	OMNIBACK-II.OMNI-CS,A.04.10

Automatic Reboot?: No

Status: General Release

Critical:
	No (superseded patches were critical)
	PHSS_30343: ABORT

Path Name: /hp-ux_patches/s700_800/10.X/PHSS_31051

Symptoms:
	PHSS_31051:
	Change Request: QXCR1000177996
	  While importing a backup session, the media session
	  manager (MSM) ends abnormally.

	Change Request: QXCR1000193430
	  When querying the catalog on the Cell Server with the
	  "omnidb" command the wrong owner of a SAP object
	  is displayed.

	Change Request: QXCR1000193452
	  Old detail catalog is not deleted on medium copy
	  operation.

	Change Request: QXCR1000193518
	  NT GUI problem.

	Change Request: 8606325101
	  Restore does not have the same cleaning mechanism
	  as backup.

	Change Request: H555013629
	  Command "omnirpt -list_media -protection NoOfDays" does
	  not properly list tapes whose protection expires in
	  "NoOfDays" as specified in the command.

	Change Request: H555013676
	  Cron job "omnimm -repository_update" may fail with error
	  11 if library has empty slots. Session is marked
	  completed with failures.

	Change Request: H555013764
	  "omnidbcheck -extended" command reports OMNIDC errors
	  when logical database is corrupted.

	PHSS_30343:
	Change Request: 8606362207
	  Backup session cannot be aborted when minimum load
	  balancing equals 2 and first 2 drives report an error.

	Change Request: H555011989
	  The post-exec script is started even though the pre-exec
	  script has not been run and the "OB2FORCEPOSTEXEC"
	  option is NOT set.

	Change Request: H555011996
	  OmniBack II does not properly show a tape capacity
	  when a tape was initialized with the specific size.

	Change Request: H555012097
	  Restores of incremental backups can be slow.

	Change Request: H555012114
	  The "omnidb -sap <object> -session <time> -catalog"
	  command reports the following error:

	   "|12:10900| Detail Catalog Database Internal Error."

	Change Request: H555012187
	  Non-existent libraries are scanned for media.

	Change Request: H555012263
	  a.) CRS quits after cluster failover.

	  b.) RDS ends abnormally when running frequent reports.

	Change Request: H555012346
	  When restoring from two backup objects, the
	  performance between the completion of the first backup
	  object and the beginning of the second backup object
	  is sluggish.

	Change Request: H555012374
	  The "omnidb -filesystem <Object> -session <Session_ID>
	  -catalog" command stops responding.

	Change Request: H555012376
	  Deletion of objects from the OmniBack II internal
	  database (IDB) is sluggish. Other sessions are waiting
	  indefinetly.

	Change Request: H555012377
	  The "omnirpt -report obj_lastbackup -datalist <backup
	  specification> -debug 1-999" ends abnormally.

	Change Request: H555012428
	  Backup session manager (BSM) intermittently ends
	  abnormally.

	Change Request: H555012804
	  The following message is reported when attempting to
	  perform a restore:

	   "|Warning| From: RSM@<hostname> ""  Time: <time>
	    No more media for restore on device <device>. Aborting
	    running Disk Agents."

	Change Request: H555013280
	  When running the "omnicellinfo -allbdf" command, the
	  following error appears:

	   "Failed to locate disks on host <hostname>!
	    Host may be unreachable."

	Change Request: H555013315
	  SQL restore may stop responding after installing the
	  Cell Server patch PHSS_30129.

	Change Request: H555013333
	  During a restore from the STK/ACS library, a mount
	  request is issued to get the correct tape. If confirmed,
	  an incorrect tape is loaded.

	Change Request: H555013469
	  Post-exec scripts fail to execute.

	PHSS_30128:
	Change Request: H555011451
	  After tape import, Lotus Notes database restore cannot
	  be performed using the graphical user interface (GUI).

	Change Request: H555011685
	  While restarting a failed session, the following error
	  message appears:

	   "Error-Detail Unknown."

	Change Request: H555011708
	  After mount request, Backup Media Agent (BMA) exits
	  and Backup Session Manager (BSM) stops responding.

	Change Request: H555011784
	  Size values returned by the "omnidbutil -info"
	  and "ll" command are different.

	Change Request: H555011788
	  The "omnimm -catalog medium_id" command may end
	  abnormally on tapes with large number of files
	  and file versions.

	PHSS_29865:
	Change Request: H555007363
	  After the MC/ServiceGuard failover,
	  the MMD service fails to start.

	Change Request: H555009725
	  Insufficient information regarding the "MaxMAperSM"
	  global options variable in the Administrator's Guide
	  and Release Notes.

	Change Request: H555010638
	  When there are large numbers of backup specifications
	  holding lots of data in the backup specification
	  headers, some of them are not displayed in the
	  Graphical User Interface (GUI).

	Change Request: H555010730
	  CRS intermittently ends abnormally.

	Change Request: H555010787
	  Backup session with enabled debugs stops responding
	  when the Backup Session Manager (BSM) or the Backup
	  Media Agent (BMA) debug file reaches 2 GB in size.

	Change Request: H555010817
	  When drives do not become available,
	  session ends abnormally.

	Change Request: H555010850
	  Filename purge is not functioning.

	Change Request: H555010860
	  Scheduled backups do not start.

	Change Request: H555010910
	  Device unlocking is not functioning as expected for
	  the Informix backup when device that is used for
	  backing up Logical Logs "L" resource type is out of
	  DYNAMIC range.

	Change Request: H555011095
	  BSM ends abnormally when the "omniabort"
	  command is used.

	Change Request: H555011119
	  Linux Media Agent requests UNIX Single Drive license
	  instead of MS Windows NT Single license.

	Change Request: H555011230
	  When using Single Server Edition (SSE) of OmniBack II,
	  backup session fails with the following error:

	   "|Major| From BSM@<hostname> <object> Time: <time>
	   Device: <device> does not reside on the Cell Manager.
	   It cannot be used for backup under SSE license."

	Change Request: H555011264
	  Every SNMP trap message is received twice in SNMP
	  management station during library rescan.

	Change Request: H555011297
	  Purge session does not appear in the GUI purge report.

	Change Request: H555011298
	  When OmniBack II database (OBDB) backup flushes
	  hot file, the scheduled backups do not start.

	Change Request: H555011344
	  "omnidbutil -free_locked_devs" command does not unlock
	  the medium.

	Change Request: H555011379
	  The Media Agent (MA) fails when trying to do
	  a local backup with only SSE license available.

	Change Request: H555011460
	  No catalog information available for "WinFs" objects
	  when backing up drive or host. "Winfs" objects return
	  the following error message when "omnidb -session
	  <time> -winfs <hostname>:/G 'G:' -catalog" is run:

	   "No catalog available for WinFS <hostname>:/G 'G:'
	   within session <session_name>."

	Change Request: 8606324070
	  Device lock timeout exceeds the time set with
	  the "SmWaitForDevice" global variable.

	PHSS_28740:
	Change Request: H555008723
	  Media copy operation completes successfully but at the
	  end Media Session Manager (MSM) reports that 0 media
	  out of 1 were successfully copied.

	Change Request: H555009054
	  Backup fails with an error:

	  "|Critical| From: BMA@<host> "<device>" Time:<time>
	   |90:30| SM/MA protocol error => aborting"

	Change Request: H555010030
	  During NDMP Backup Session Omniback II Database gets
	  corrupted, which can be detected by running a
	  "omnidbcheck -sibf" command .

	Change Request: H555010269
	  After OmniBack II A.03.50 tapes with Exchange
	  objects are imported to Omniback II A.04.10,
	  Internal DataBase (IDB) is corrupt.

	Change Request: H555010280
	  Command "omnidbutil -writedb" fails with error:

	  "|Critical| From: OMNIDBUTIL@<host> ""  Time:<time>
	   |12:1165| Database network communication error."

	Change Request: H555010285
	  Medium import operation fails with message:

	   "|Critical| From: MSM@<host> "datalist" Time:<time>
	    |65:99|Import failed with possible cause:
	     this media already has valid copy in DB."

	Change Request: H555010380
	  NDMP restore from multiple imported tapes fails with:

	   "|Major| From: RSM@<host> ""  Time:<time>
	       Unknown internal error."

	Change Request: H555010381
	  When media in free pool is used and becomes protected
	  it still remains in free pool.

	Change Request: H555010432
	  When performing omnisv -stop command crs dies with:

	    "Cannot stop "omniback_crs" service,
	     system error: |502|".

	Change Request: 8606307557
	  If one of BMA fails in a load-balanced backup, then
	  all other available devices are started and the total
	  amount of started devices is greater than MAX number
	  of devices defined in datalist.

	PHSS_28731:
	Change Request: H555009289
	  Performing "omnisv -stop" command sometimes returns exit
	  code different then 0 and because of that crs dies with
	  error message:

	    "Cannot stop "omniback_crs" service
	    system error:|502|"

	Change Request: H555009297
	  After aborting host backup the object post-exec script
	  does not execute.

	Change Request: H555009322
	  "omnib" started from different scheduler completes
	  successfully,  but the following error is reported
	  to stderr:

	    "SystemErr: |10054| Connection reset by peer"

	Change Request: H555009381
	  Catalog import fails if "dcbf" file does not exist.

	Change Request: H555009382
	  Running backup on Cell Manager which is inhibited with
	  command: omniclus -clus host_name -inhibit "time"
	  produces default error report and abnormal end of
	  session.

	Change Request: H555009560
	  Backup run twice when daylight saving time is changed.

	Change Request: H555009567
	  "debug.log" contains messages that Detail Catalog
	  Binary Files (DCBF) is corrupted, although "omnidbcheck"
	  does not report any error.

	Change Request: H555009593
	  When using the "omnimm -list_scratch_media 'pool_name'"
	  command, no NDMP media is listed .

	Change Request: H555009779
	  After installing SSPUX410_056, aborted Oracle
	  backup session hangs.

	Change Request: H555009833
	  When omnitrig is stopped and omnisv is started with
	  "omnisv -start_mon", all services stop.

	Change Request: H555009877
	  Backup specification does not reflect correct
	  schedules.

	Change Request: H555009895
	  omnidbutil -cdbsync fails in a non-MOM environment.

	Change Request: H555010043
	  Message "EIPCALREADYINIT" is filling the debug.log file.

	Change Request: H555010075
	  When virtual name does not match the hostname of the
	  host currently running as the cell manager, all the
	  scripts are considered as remote exec script.

	Change Request: H555010103
	  Imported catalog from media has catalog protection
	  set to None.

	Change Request: H555010123
	  Restore session fails with error:

	    "|Critical| From: RSM ""  Time:<time>
	    Media Management daemon subsystem reports:
	        "Invalid slot specified."

	Change Request: H555010158
	  After aborting the backup session, new backup session
	  is started and it hangs for a SmMaIdleTimeout variable,
	  before it aborts.

	Change Request: H555010234
	  Integration restore hangs if SmWaitForNewClient
	  variable is not properly set.

	Change Request: 8606289026
	  Device Flow Report is not working correctly.

	Change Request: 8606298931
	  Instead of positioning the tape to the beginning of the
	  file, backint restore positions the tape to the
	  beginning of the whole object.

	Change Request: 8606300821
	  Executing "crs -redebug" from command line displays
	  a usage summary.

	PHSS_27602:
	Change Request: H555008641
	  Whenever there is OmniBack II activity going on in
	  the Cell, the update of the NT clients fails.

	Change Request: H555008650
	  Restarting CS daemons using omnisv produces the
	  following entries in the debug.log:

	    "VELOCIS DB ERROR [0] internal error
	      [-2005] server unavailable"

	Change Request: H555008680
	  When Cartridge Memory Support is activated for drives
	  with the LTO-Ultrium media type, MSM (Media Session
	  Manager) goes into a loop when try to reformatting or
	  listing Cartridge Memory contents.

	Change Request: H555008690
	  If a Manager-of-Managers Server is also a
	  MC/ServiceGuard virtual node, then the command
	  "omnirpt -report list_sessions -timeframe
	   <start_hours_ago><hours_duration>
	   -multicell -no_multiple"
	  lists the matching sessions from this node twice.

	Change Request: H555008704
	  Format the original medium and purge the database
	  deletes Detail Catalog Binary Files (DCBF) files.

	Change Request: H555008716
	  Messages from pre/post exec scripts are not filtered.

	Change Request: H555008722
	  Reporting Email header does not contain device name.

	Change Request: H555008807
	  When backing up SAP integration with EMC split mirror
	  functionality, not all the SAP files are backed up.

	Change Request: H555008832
	  Filesystem backup fails with an error:

	  "[Major] From: BSM@<computer> "<object>"  Time: <time>
	   [61:3003] Lost connection to VBDA named <object>
	    on host <host>.
	    Ipc subsystem reports: "IPC Read Error
	    System error: [232] Connection reset by peer"

	Change Request: H555008887
	  The connection with the host running SSEA agent is
	  broken.

	Change Request: H555008908
	  When OmniBack II tries to backup non-existent SAP
	  redo logs, session is ended as failed.

	Change Request: H555008927
	  While configuring OmniBack II reports using GUI,
	  only datalists are listed (barlists are missing).

	Change Request: H555008950
	  After running "omnidbutil -cdbsync", the Catalog
	  Database is lost.

	Change Request: H555008998
	  When a host backup session is using WakeOnLan option,
	  it can not retry using specified value from the
	  SmMaxAgentStartupRetries option.

	Change Request: H555009008
	  Restore Graphical User Interface (GUI) does not
	  browse nested mountpoints.

	Change Request: H555009017
	  Load balancing does not work correctly in case
	  of mount request.

	Change Request: H555009053
	  In case when only Single Server Edition license
	  is applied, media agent fails during local backup.

	Change Request: H555009061
	  In Manager-of-Managers configuration with Central
	  Media Management Database request for pools list
	  report fails.

	Change Request: H555009083
	  In case that Detail Catalog Binary Files do not exist
	  in the OmniBack II database, catalog import fails.

	Change Request: H555009153
	  OmniBack II does not display data written in
	  Disk Agent (DA) context of the Graphical User
	  Interface (GUI) during NDMP restore.

	Change Request: H555009194
	  Total blocks and Used blocks of medium are reported as
	  negative numbers.

	Change Request: H555009209
	  a)During backup session using multiple devices, Cancel
	    Device options leaves device locked. Device is not
	    available to another session.

	  b)If connection to a Monitor is lost during backup
	    session the following message appears:

	    "[Major] From: BSM@<HOSTNAME> "<OBJECT>"  Time: <TIME>
	     [61:3003] Lost connection to Monitor named "noname"
	     on host <HOSTNAME>. Ipc subsystem reports: "IPC Read
	     Error System error: [232] Connection reset by peer."

	Change Request: H555009263
	  "omnidbutil" ends abnormally during "readascii" process.

	Change Request: H555009286
	  Catalog binary file is deleted if original medium with
	  copy is recycled or exported. Importing the catalog
	  from copy medium is not possible.

	Change Request: 8606245960
	  Backup GUI displays selection, which is inconsistent
	  with datalist.

	Change Request: 8606280024
	  Report "Extended report on used media" gives wrong info
	  about used media in selected timeframe.

	PHSS_27454:
	Change Request: H555007590
	  OmniBack II does not check into what slot mediums were
	  entered when mount request is confirmed.

	Change Request: H555007736
	  Report "Backup Error" does not properly display the
	  number of errors of the backup session.

	Change Request: H555008063
	  Restore is started even in case that drive is
	  disabled.

	Change Request: H555008105
	  Although the number of devices specified in the
	  backup specification is greater than minimum value
	  specified in load balancing options, the following
	  message is displayed:

	  "Number of devices specified in backup
	   specification is smaller than MIN value of load
	   balancing."

	Change Request: H555008180
	  DailyMaintenance backup deletes DCBF files of
	  currently running backups.

	Change Request: H555008242
	  During backup of NDMP integration Backup Media Agent
	  session completes with failures.

	Change Request: H555008261
	  Backup fails with an error:

	  "Internal error. Allocation form library failed.
	   The Media Management daemon reports:
	   "Internal error: DbaXXXX functions.""

	Change Request: H555008452
	  Backup Session Manager does not terminate after
	  the time specified in the SmDaIdleTimeout variable
	  when connection to Disk Agent and Media Agent is lost.

	Change Request: H555008549
	  The following warning message is displayed:
	  "[Warning] From: <hostname> "<datalist or barlist name>"
	   Time: mm/dd/yy hh:mm:ss
	   License not available
	   "Split Mirror Extension for ONE EMC Symmetrix""

	Change Request: H555008606
	  SAP offline backup using the VA integration reports
	  the following errors:

	  "[Major] From: BSM@<CM_hostname>
	   "<datalist_or_barlist_name>"  Time: mm/dd/yy hh:mm:ss
	   [61:1002]   The Snapshot Agent named ""
	   on host <hostname>
	    reached its inactivity timeout of 7200 seconds.
	    The agent on host will be shutdown."

	Change Request: 8606262839
	  Configuration Report creates an incorrect list of
	  scheduled backups.

	PHSS_26353:
	Change Request: H555006969
	  The OmniBack II database backup fails with 'Session
	  Aborted' if the global variable 'RecoveryIndexDir='
	  refers to a directory that either does not exist or
	  is not accessible. (This variable indicates the
	  location of a copy of the RecoverIndex file.)

	Change Request: H555007177
	  If ".util HOSTNAME" returns nothing with "omnicc
	  -import_host", crs ends abnormally.

	Change Request: H555007218
	  If you try to restore files in interval that does not
	  include full backup the following error appears:

	    "DB unknown error".

	Change Request: H555007362
	  Devices are locked after the end of media session.

	Change Request: H555007364
	  After OmniBack II services are stopped during backup
	  and the remaining OmniBack II processes are killed,
	  mmd and crs fail to start afterwards.

	Change Request: H555007383
	  "Restore by query" loops forever.

	Change Request: H555007428
	  Backup fails with error:

	    "[Major] From: BMA@<HOST>  Time:<TIME>
	     [90:64] Can not unload exchanger medium
	       (Storage slot is occupied.)".

	Change Request: H555007455
	  When source tape protection expires and the catalog is
	  still protected, the tape is reused although a copy is
	  attached to it. Transporting the catalog then results
	  is protection set to "None" for the objects from
	  original tape.

	Change Request: H555007485
	  Purgeadvisor reports that filename purge is needed
	  even after the purge is done.

	Change Request: H555007524
	  Although the number of devices specified in the
	  backup specification is greater then minimum value
	  specified in load balancing options, the following
	  message is displayed:

	  "Number of devices specified in backup
	  specification is smaller than minimum value of load
	  balancing.".

	Change Request: H555007700
	  Backup fails with error:

	  "[Critical] From: BMA@<HOST> "<DEVICE>" Time:<TIME>
	   [90:30] SM/MA protocol error => aborting"

	Change Request: H555007901
	  After applying CS patch (PHSS_25962/PHSS_25963),
	  the OB2PORTRANGE variable is ignored.

	Change Request: 8606248483
	  Address of a Cell Console client is incorrectly
	  handled.

	PHSS_25962:
	Change Request: H555006771
	  Load balancing is not working properly.

	Change Request: H555006772
	  Omniback database suddenly stops reporting any
	  details about sessions.

	Change Request: H555006788
	  After the execution of a session with load balacing
	  used, devices remain locked and cannot be used for
	  later sessions.

	Change Request: H555006819
	  Forced ownership in datalist does not function
	  properly.

	Change Request: H555006843
	  Backup Session Manager abnormally ends.

	Change Request: H555006868
	  Vault reporting does not work properly.

	Change Request: 8606229643
	  Changing any option for a DCBF directory resets
	  all other values to default.

	Change Request: H555006757
	  "End of Session" e-mail notification does not specify
	  datalist name for which it was created.

	Change Request: H555006939
	  Restore of Oracle 8 objects hangs.

	Change Request: H555006948
	  Cell Request Server abnormally ends periodically.

	Change Request: H555006968
	  The 'omnidbrestore -autorecover' fails with error:

	   "Current medium is refused for restore. Aborting!"

	Change Request: H555006998
	  Using a "\" sign when setting RecoveryIndexDir option
	  in global options file sometimes causes Backup Session
	  Manager failure.

	Change Request: H555007081
	  "omnisv -start_mon" is inactive for 1 second between
	  loops.

	Change Request: H555007115
	  Executing "omnidbutil -purge -filenames <hostname>"
	  fails with an error:

	    "[Major] From: OMNIDBUTIL@<host> ""  Time: <time>
	     Functionality not (yet) supported."

	Change Request: 8606221771
	  Case sensitive search does not work.

	Change Request: 8606236143
	  Not all session manager processes are correctly stopped
	  using csfailover.ksh script.

	Change Request: H555007234
	  Some objects are missing from the OmniBack internal
	  database after upgrading OmniBack II A.03.xx to
	  OmniBack II A.04.10.

Defect Description:
	PHSS_31051:
	Change Request: QXCR1000177996
	  Insufficient buffer space.

	  Resolution:
	  Backup specification is truncated if the size exceeds
	  "STRLEN_MESSAGE".

	Change Request: QXCR1000193430
	  The 32 bit numbers for user ID and group ID are not
	  supported. Only 16 bit IDs is supported.

	  Resolution:
	  Support for 32 bit numbers for user ID and group ID added.

	Change Request: QXCR1000193452
	  Detail catalog file is not deleted.

	  Resolution:
	  Detail catalog file is now removed. Added code to remove
	  dcbf file on medium copy operation.

	Change Request: QXCR1000193518
	  Action problem.

	  Resolution:
	  Behavior is adjusted.

	Change Request: 8606325101
	  When Media Agent detects a dirty drive, the Restore
	  Session Manager issues a Mount Request for cleaning tape
	  instead of automatically loading a cleaning tape from
	  the cleaning slot.

	  Resolution:
	  When Media Agent detects dirty drive, Data Protector
	  automatically loads a cleaning tape for the backup and
	  restore session.

	Change Request: H555013629
	  Command "omnirpt -list_media -protection NoOfDays" lists
	  tapes with expired protection and no protection.

	  Resolution:
	  If option "-protection NoOfDays" is selected, OmniBack
	  II lists only tapes whose protection will expire
	  in "NoOfDays".

	Change Request: H555013676
	  Completed with failures exit status is used by Media
	  Session Manager (MSM) on "LIB_RESCAN" when library has
	  empty slots.

	  Resolution:
	  MSM exits with success on "LIB_RESCAN" when total media
	  count is larger than media actually scanned.

	Change Request: H555013764
	  "Fixmpos" does not fix corrupted detail catalog part of
	  database if problematic detail catalog does not exist.

	  Resolution:
	  The "mbfconfig" record is now deleted even if detail
	  catalog file does not exist. Additional query on
	  "mbfconfig" is implemented in the "cdbsync"
	  functionality.

	PHSS_30343:
	Change Request: 8606362207
	  OmniBack II tries to lock new devices. When they are not
	  available, it loops indefinitely.

	  Resolution:
	  If there is an unusable device and minimum load balance
	  is set higher than 1, it is decreased.

	Change Request: H555011989
	  The post-exec script is set to execute if the pre-exec
	  script executes without errors. The problem occurs when
	  the session is aborting and the pre-exec script has not
	  been executed yet as its execution status is still set to
	  OK.

	  Resolution:
	  Added additional checking for session manager state to
	  not execute the post-exec script when the state is set to
	  "BSM_STATE_ABORTED".

	Change Request: H555011996
	  OmniBack II always shows the real tape capacity
	  although the tape was initialized with the specific size.

	  Resolution:
	  OmniBack II properly shows a tape capacity.

	Change Request: H555012097
	  The query that calculates which objects from a full
	  restore chain are required for a restore is time
	  consuming.

	  Resolution:
	  The query is optimized.

	Change Request: H555012114
	  Invalid option "lan" is imported to the OmniBack II
	  internal database (IDB).

	  Resolution:
	  On catalog import, the invalid "lan" option is removed
	  if the "OB2IMPORTCATALOGSAP=1" variable is exported to
	  the "omnirc" file.

	Change Request: H555012187
	  Barcode scan uses non-existent devices and/or barcode
	  scan is attempted on devices without a barcode reader.

	  Resolution:
	  Additional functionalities are implemented. Barcode
	  scan uses only existent devices, as displayed in the
	  OmniBack II graphical user interface (GUI). Barcode
	  scan is performed only on devices with a barcode reader.

	Change Request: H555012263
	  a.) After the failover, CRS quits because the MMD service
	      quits. The MMD service quits because a time-out
	      occurs while obtaining the licensing information.

	  b.) Due to the memory leaks in the RDS extension modules,
	      the memory usage per process increases. Eventually,
	      the reallocation calls fail.

	  Resolution:
	  a.) Licensing information is released when the
	      OmniBack II services end abnormally.

	  b.) Memory leaks are eliminated.

	Change Request: H555012346
	  Restore Media Agent performs a serial search between
	  objects instead of seeking to the beginning of the
	  second object.

	  Resolution:
	  Algorithm for searching segment position on the tape
	  is changed. If two objects are more than one segment
	  apart, Restore Media Agent seeks to the beginning of
	  the second object.

	Change Request: H555012374
	  If "new line" characters are present in the filenames
	  tablespace in the OmniBack II internal database
	  (IDB), the "omnidb -filesystem <Object> -session
	  <Session_ID> -catalog" command stops responding.

	  Resolution:
	  "omnidb" command functions correctly regardless of the
	  type of characters present in the filenames tablespace
	  in the IDB.

	Change Request: H555012376
	  A session spends a long time deleting old objects from
	  the IDB when an expired medium is used, causing other
	  sessions to wait indefinetely. The reason is that the
	  IDB is locked while objects are being deleted.

	  Resolution:
	  Other sessions are allowed to run during a deletion of
	  old objects from the IDB.

	Change Request: H555012377
	  When expanding host objects, the DiskLabel buffer is
	  overflown.

	  Resolution:
	  DiskLabel buffer size is enlarged.

	Change Request: H555012428
	  BSM quits in the function "BsmOnClose" when trying to
	  set the Disk Agent's "endTime" variable. The pointer
	  to the Disk Agent's structure is invalid at the time
	  the BSM is trying to update it.

	  Resolution:
	  The "endTime" variable setting is moved higher in the
	  "BsmOnClose" function code where the Disk Agent's
	  structure pointer is still valid.

	Change Request: H555012804
	  "No more media for restore on device" message is
	  displayed and restore session stops responding. This
	  message may appear when restoring hardlinks (pointing to
	  the same file) that are present on more than one tape.

	  Resolution:
	  Problem fixed in Restore Session Manager (RSM). For this
	  fix to work, set the "RepositionWithinRestoredObject"
	  variable in the global options file to 0.

	Change Request: H555013280
	  "Omnicellinfo" returns random responses.

	  Resolution:
	  "Omnicellinfo" return status changed.

	Change Request: H555013315
	  SQL restore may stop responding after installing the
	  Cell Server patch PHSS_30129.

	  Resolution:
	  SQL restore completes successfully.

	  Part of SSPUX410_091.

	Change Request: H555013333
	  Another tape is loaded instead of issuing another mount
	  request.

	  Resolution:
	  Restore Session Manager (RSM) procedure is improved to
	  issue a mount request until the correct tape is loaded.

	Change Request: H555013469
	  This occurs because there were some changes made to
	  executing remote scripts as local when on a local host.
	  Local execution of scripts fails because of an incorrect
	  current working directory that is "/var/opt/omni/log"
	  instead of "/opt/omni/lbin".

	  Resolution:
	  Corrected relative path of an executing script on a
	  local host to be a full path with "/opt/omni/lbin/"
	  preappended.

	  Part of SSPUX410_090.

	PHSS_30128:
	Change Request: H555011451
	  Info about the type of session is not written on tape
	  during a backup, while OBDB is correctly updated. After
	  the tape import, information about the type of session
	  does not enter OBDB, therefore the object version is
	  not displayed in restore GUI for Lotus Notes
	  integration.

	  Resolution:
	  Problem fixed in BSM and Media Session Manager (MSM).

	Change Request: H555011685
	  After restarting the failed session, the following
	  dialog window appears:

	   "Changes in the database detected. Would you like to
	   refresh database objects."

	  When the dialog is closed, the following error can be
	  seen in the session report window:

	   "Restart of Backup: <SESSION_ID> Error-Detail
	    Unknown."

	  Resolution:
	  Backup Session Manager (BSM) is fixed to allow
	  a successfully restart of the failed session.

	Change Request: H555011708
	  If there are no appendable media available for backup,
	  a mount request is issued and 10 minutes later, the BMA
	  exits without reporting any errors. After this, the BSM
	  stops responding until the session is manually aborted.

	  Resolution:
	  BMA is not aborted when it is in the mount request
	  state.

	Change Request: H555011784
	  Calculated sizes are not properly rounded up.

	  Resolution:
	  Size calculation of the OmniBack II database (OBDB)
	  is improved by rounding up the size.

	Change Request: H555011788
	  "omnimm" consumes the 1 GB process address space
	  and ends abnormally.

	  Resolution:
	  "omnimm" and "dbsm" are build as "EXEC_MAGIC" to
	  enlarge the maximum process memory consumption
	  up to 1.75 GB.

	PHSS_29865:
	Change Request: H555007363
	  After MC/ServiceGuard failover, semaphore locking
	  problem and problem with cleaning shared memory
	  occur. Since semaphore lock and shared memory
	  are not cleaned after failover, all licenses are
	  taken and there is no free license available for use.

	  Resolution:
	  Semaphores and shared memory are properly cleaned.

	Change Request: H555009725
	  Insufficient information regarding the "MaxMAperSM"
	  global options variable in the Administrator's Guide
	  and Release Notes.

	  Resolution:
	  Complemented the definition of the "MaxMAperSM"
	  variable in the Administrator's Guide and Release
	  Notes.

	Change Request: H555010638
	  OmniBack II limitation of 80 KB, reserved for
	  the list of backup specifications, is exceeded.

	  Resolution:
	  Backup specification description data which is passed
	  to the GUI twice, also at querying every single backup
	  specification, has been left out to secure more space
	  in the message.

	Change Request: H555010730
	  CRS intermittently ends abnormally
	  on the HP-UX 11.x systems.

	  Resolution:
	  CRS is functioning correctly.

	Change Request: H555010787
	  Binaries are not properly build.

	  Resolution:
	  Binaries are properly build.

	Change Request: H555010817
	  With particular configurations of load balancing,
	  waiting sessions do not obtain freed-up drives
	  and they abort.

	  Resolution:
	  Session waits when there are no HP-UX or Windows
	  drive licenses available.

	Change Request: H555010850
	  Bad option ("-- number") in the internal database (IDB)
	  causes filename not to run.

	  Resolution:
	  During readdb/writedb process, bad options are skipped.

	Change Request: H555010860
	  Omnitrig process does not start any backup at all if
	  the "holidays" file includes a syntax error. The
	  "holidays" file is read at the beginning, before
	  omnitrig starts the scheduled backups. In case of
	  a syntax error, omnitrig aborts execution, which
	  prevents omnitrig to read the scheduler files
	  and to execute backups at scheduled times.

	  Resolution:
	  Omnitrig behavior in case of syntax errors in the
	  "holidays" file is changed. Now omnitrig continues
	  with an execution in such cases, which means that
	  the syntax errors are skipped, logged to the
	  "debug.log" file and most important scheduled backups
	  are started.

	Change Request: H555010910
	  When all devices are locked and device used for backing
	  up Logical Logs resource type is not included in the
	  DYNAMIC range, the backup session will stop responding
	  and the backup will not complete successfully.

	  Resolution:
	  Unused device will be unlocked when the global options
	  variable "BackupDeviceIdle" times out. The new device
	  will be locked then and used for a backup session.

	  Part of SSPUX410_077.

	Change Request: H555011095
	  When a mount script is configured to issue an
	  "omniabort" command, anytime a mount request is issued
	  and not responded to by the time mount script is
	  called, BSM ends abnormally after the mount script
	  calls the "omniabort" command.

	  Resolution:
	  BSM functions properly when the "omniabort"
	  command is used.

	Change Request: H555011119
	  OmniBack II recognizes i686 as non-Intel
	  architecture, hence required license is the UNIX
	  type license.

	  Resolution:
	  Added i686 as possible Linux architecture.

	Change Request: H555011230
	  OmniBack II does not compare hostnames correctly.

	  Resolution:
	  When OmniBack II checks for SSE license,
	  hostnames are compared with case insensitive function.

	Change Request: H555011264
	  BSM checking for NULL message is not functioning
	  correctly.

	  Resolution:
	  BSM checking for NULL message is functioning correctly.
	  Checking for existence of Media Session Manager (MSM)
	  session is added. If MSM session exists, BSM does not
	  send SNMP messages.

	Change Request: H555011297
	  Report is not generated during a purge.

	  Resolution:
	  Purge report is generated.

	Change Request: H555011298
	  Functions "d_open" and "d_iopen" were denied while
	  flushing hot files in the database. No other agent
	  can connect at this time.

	  Resolution:
	  Defect in the libraries is corrected.

	Change Request: H555011344
	  MMD is checking for lock owner.

	  Resolution:
	  Checking for lock owner is disabled when unlock
	  is called using "omnidbutil" command.

	Change Request: H555011379
	  BSM abnormally ends a session with only the SSE
	  license available before checking whether there
	  is an attempt to put the locked device in a queue.

	  Resolution:
	  BSM first checks whether there is an attempt to put
	  the locked device in a queue. If it is, then it checks
	  for the SSE license. If only the SSE license is
	  present, then the session is ended abnormally.

	Change Request: H555011460
	  "-tree" option is missing in the IDB.

	  Resolution:
	  "-tree" option is added to the IDB.

	Change Request: 8606324070
	  Each time a needed device is released by concurrent
	  session, timeout is reset. If session does not get the
	  device because it is outran by another session, session
	  waits for another "SmWaitForDevice". Theoretically,
	  session can wait for the unlimited amount of time.

	  Resolution:
	  Timeout is reset only at the beginning of the
	  DEVLOCKQUEUE-DEVLOCK state. This is forced by
	  initializing timeout only at the beginning of
	  session and when all needed devices are locked.

	  Part of SSPUX410_082.

	PHSS_28740:
	Change Request: H555008723
	  MSM ignores status reported by the agents.

	  Resolution:
	  When waiting for Cell Manager update answer MSG_OPEN
	  is swallowed. Cell Manager update result is now
	  received asynchronically.

	  Part of SSPUX410_071.

	Change Request: H555009054
	  In case that reconnect option is used for backup,
	  it is possible that Media Agent fails due to a
	  protocol error.

	  Resolution:
	  Protocol between Session Manager and Media Agent is
	  changed in order not to acknowledge normal formatted
	  messages.

	Change Request: H555010030
	  Meta files are removed although there are still object
	  versions in the Omniback II database with reference to
	  those meta files.

	  Resolution:
	  Meta files are no longer removed if there are object
	  versions in the Omniback II database with references
	  to them.

	Change Request: H555010269
	  OmniBack II A.03.50 IDB records for Exchange objects
	  are not properly re-formatted during tape import
	  procedure.

	  Resolution:
	  Tape import procedure reformats Exchange objects
	  to Omniback II A.04.10 format during import phase.

	Change Request: H555010280
	  If Omniback II database contains a lot of object
	  versions, a 'Stack Frame OverFlow Violation' error is
	  reported in RDS.log and RDS ends abnormally.

	  Resolution:
	  Failing "WriteASCIIOVerTre" function is split into
	  two separate functions.

	Change Request: H555010285
	  It can happen that media positions remain in
	  database. When you try to import the medium
	  an error occurs.

	  Resolution:
	  New "DbForceImportIfPositionsExist" variable is
	  introduced in global file. When set to 1 it forces
	  medium import even if medium positions exist.

	Change Request: H555010380
	  Meta files are linked to the last medium used by NDMP
	  backup. When importing first (other than last) medium
	  to Omniback II database, object versions are
	  entered into the database. Since they already exist
	  in the database it is assumed that the database
	  reference to the meta file also exists while
	  importing the last tape, but that is not the case.

	  Resolution:
	  Only when the old object versions already contain
	  reference to the meta-file is the old object version
	  copied over the newer and the reference to the meta
	  file is assumed to be already existing. By default
	  reference to meta-file is reestablished.

	Change Request: H555010381
	  When "omnidbutil -free_pool_update" is started during
	  the backup, protected medium is moved back to free pool.

	  Resolution:
	  The option for disabling automatic deallocation of media
	  is put in global file.

	
	Change Request: H555010432
	  Omnisv does not wait long enough before stopping crs
	  service.

	  Resolution:
	  Global variable OmnisvStatusSleep is not correctly
	  set and exported.

	  Part of SSPUX410_074.

	Change Request: 8606307557
	  Currently locked and running devices are not taken
	  into account by the algorithm.

	  Resolution:
	  The parameters passed to algorithm are changed.

	  Part of SSPUX410_070.

	PHSS_28731:
	Change Request: H555009289
	  Omnisv does not wait long enough for crs service to be
	  stopped.

	  Resolution:
	  New global option variable "OmnisvStatusSleep" is
	  introduced. Add this new variable into global options
	  file: OmnisvStatusSleep=X; where x should be in range
	  2<X<60. This will enable omnisv to wait for X seconds
	  to successfully stop crs service.

	Change Request: H555009297
	  Before executing the object post-exec script,
	  OmniBack II checks if session is aborting. If
	  it is, then script does not execute.

	  Resolution:
	  Global variable PostExecOnAbortHostBackup was added.
	  If this global variable is set to 1, the post-exec
	  script will execute even if the session is aborting.

	Change Request: H555009322
	  Backup Session Manager (BSM) is going down too fast
	  after sending "MSG_CLOSE" to connected monitors.

	  Resolution:
	  "OB2BSMSLEEPBEFORECLOSE" environment variable is added
	  in order to wait few seconds before going down.

	Change Request: H555009381
	  During catalog import OmniBack II tries to remove the
	  original "dcbf" file. If this file does not exist,
	  catalog import fails.

	  Resolution:
	  Catalog import is improved in order not to abort in
	  case if "dcbf" file does not exist.

	Change Request: H555009382
	  Crs tries to receive messages by inhibited Cell Manager.

	  Resolution:
	  If Cell Manager is inhibited, Data Protector does not
	  send or receive any messages, but exits with message:

	    "|12:1602| Cannot access the Cell Manager system".

	Change Request: H555009560
	  The algorithm, that handles the daylight saving time
	  changes is uncomplete.

	  Resolution:
	  The algorithm is changed for both time changes:
	  02h->03h and 03h->02h.

	Change Request: H555009567
	  "omnidbcheck" does not correctly report corruption in
	  Detail Catalog Binary Files (DCBF).

	  Resolution:
	  "omnidbcheck" is improved in order to correctly report
	  errors on the Detail Catalog Binary Files (DCBF).

	Change Request: H555009593
	  NDMP media data format is not marked as OmniBack II
	  data format. Command "omnimm -list_scratch_media
	  'pool_name'" lists only OmniBack data format.

	  Resolution:
	  Command "omnimm -list_scratch_media 'pool_name'" is
	  changed; now it also lists NDMP data format media.

	Change Request: H555009779
	  When Oracle integration backup issues a mount request
	  and an attempt to abort backup is made, the omniabort
	  will hang and the session will not shut down. This
	  happens with SSPUX410_056 installed.

	  Resolution:
	  Backup Session Manager (BSM) is fixed.

	  Part of SSPUX410_061.

	Change Request: H555009833
	  "omnisv -start_mon" checks status of all services.

	  Resolution:
	  omnisv -start_mon checks status of all services
	  excluding omnitrig.

	Change Request: H555009877
	  Schedules with excluded days are interpreted
	  incorrectly.

	  Resolution:
	  Schedules interpretation for excluded days is changed.

	Change Request: H555009895
	  After checking for mom_server file error is not cleared.

	  Resolution:
	  After checking for mom_server file error is cleared.

	Change Request: H555010043
	  Function IpcExit() is never called, so each time the
	  function IpcInit() is called, the error is written in
	  debug log.

	  Resolution:
	  Function IpcExit() is put to correct place in the code.

	Change Request: H555010075
	  When session is configured using post or pre exec
	  scripts on virtual machines no check is being made to
	  determine if IP is local. Only hostnames (strings) are
	  compared.

	  Resolution:
	  Additional checking is made to determine if IP is local.

	Change Request: H555010103
	  When importing catalog its protection is set to
	  None. When catalog is imported with None protection it
	  is purged out of database first time when purge is
	  started.

	  Resolution:
	  Catalog's protection is changed to be set to Permanent
	  after importing it.

	Change Request: H555010123
	  OmniBack II does not lock tapes properly.

	  Resolution:
	  OmniBack II checks if tape is locked by any of the
	  owners before locking the tape.

	Change Request: H555010158
	  Omniback II aborts all OB2BAR connections which do
	  not make connection to object in time.

	  Resolution:
	  OB2BAR connections that do not make it to objects
	  in time are now aborted properly.

	Change Request: H555010234
	  When Media Agent is in stopping state Restore Session
	  Manager (RSM) can not handle restore request from the
	  OB2BAR.

	  Resolution:
	  Request list is reset after Media Agent gets MSG_STOP
	  from RSM.

	Change Request: 8606289026
	  When backup is aborted OmniBack II does not enter "End
	  Time" variable in the database.

	  Resolution:
	  When session is aborted or mount request is issued
	  OmniBack enters "End time" variable in the database.

	Change Request: 8606298931
	  Restore position for file is not calculated.

	  Resolution:
	  Calculation of file position within object is added.

	Change Request: 8606300821
	  While parsing arguments passed to crs binary, missing
	  arguments after -redebug options are not expected
	  thus abort follows and help is written.

	  Resolution:
	  Parsing is changed. When arguments for redebug are not
	  passed on command line, trace file is examined. If trace
	  file does not include parameters, help is written.

	PHSS_27602:
	Change Request: H555008641
	  OmniBack II erroneously tries to unpack already
	  unpacked error message in "omnicc" and overwrites
	  another variable.

	  Resolution:
	  Error unpacking and variable name are changed.

	Change Request: H555008650
	  CRS service is trying to connect to Raima Database
	  Server while it is still in pending state.

	  Resolution:
	  CRS service waits for RDS to start listening.

	  Part of SSPUX410_043.

	Change Request: H555008680
	  Media Agent ends abnormally when listing all
	  Cartridge Memory contents for the specific medium or
	  reformatting Cartridge Memory of a specific medium.

	  Resolution:
	  MSM (Media Session Manager) is improved in order to
	  session finish successfully in case of reformatting
	  cartridge memory or listing cartridge memory contents.

	  Part of SSPUX410_039.

	Change Request: H555008690
	  When running "omnirpt" command all the cell servers from
	  the "mom_info" and the local Cell Server are queried for
	  matching sessions. The virtual node and the local host
	  are actually the same machine, so the matching sessions
	  are listed twice.

	  Resolution:
	  The function gethostname() is not used any more to
	  determine if the inspected host is also the local host,
	  cause in case of a Manager-of-Managers/ServiceGuard
	  environment it returns the physical node hostname and
	  not the virtual node hostname, making the virtual
	  hostname being seen as a non-local host. In this way
	  the virtual hostname is not queried for matching
	  sessions any more.

	Change Request: H555008704
	  Purge operation purges catalogs even if copied tape
	  still exist in the database. Tape format removes
	  catalog from the database even if the copy tape is
	  still protected.

	  Resolution:
	  The Detail Catalog Binary Files (DCBF) files are not
	  deleted if the copy tape has valid protection.

	Change Request: H555008716
	  Non OmniBack II format messages from pre/post exec
	  script are not filtered.

	  Resolution:
	  The Backup Session Manager is changed in order to
	  filter non OmniBack II format messages from pre/post
	  exec script.

	Change Request: H555008722
	  Device name is not exported in EVENTOBJECT environment
	  variable.

	  Resolution:
	  Device name is exported in to EVENTOBJECT environment
	  variable.

	Change Request: H555008807
	  In split mirror environment with huge SAP databases
	  it can happen that the size of the message buffer
	  OmniBack II uses is too small to receive complete list
	  of SAP files to be backed up.

	  Resolution:
	  Setting the OB2IPCBUFSIZE environment variable in the
	  /opt/omni/.omnirc file on Cell Server, R1 and R2 hosts,
	  specifying the desired amount of memory to be used for
	  the buffer solves the described problem.
	  Please read the following instructions and make sure
	  that the patches listed in "Other Dependencies" section
	  (see below) are installed and the environment
	  variable is set on Cell Server, R1 and R2 systems before
	  running the backup!

	  How to determine the buffer size?
	  ---------------------------------

	  N_obj:     number of objects (files)
	  N_fs:    number of file systems
	  N_lvmvg:   number of volume groups
	  N_dg:    number of disk groups
	  N_rdsk:    number of rawdisks
	  Obj:     Object Name
	  ObjBack:   Object Backup Name
	  MntPathLen:  Path name on backup (R2) host
	         (example: /var/opt/omni/tmp/App_host)
	  fsmnt:     File System Mount Point
	  fsdev:     File System Device File
	         (example: /dev/dsk/[c0t1d1,lvol1])
	  vg:      Volume group
	         (ex: /dev/vg01)
	  dg:      Disk group (VxVM) - dependence on mapfile
	         which is required for creating disk group
	         (example:/dev/vx/dsk/dg01)
	  rdsk:    Raw disk file name
	         (example: /dev/rdsk/c1t1d1)
	  AvgLen_<xxx> average length of <xxx>

	
	  There are two different buffers used:

	  1. BSM <-> R1
	  2. R1 <-> R2

	  Calculating the BSM <-> R1 buffer size
	  --------------------------------------
	  MsgSize_BSM_R1 = N_obj * (AvgLen_Obj + 1 + MntPathLen)

	  Calculating the R1 <-> R2 buffer size
	  -------------------------------------
	  MsgSize_R1_R2 =
	    N_obj*(AvgLen_Obj+1+AvgLen_ObjBack) +
	    N_fs*(AvgLen_fsmnt*2 + MntPathLen + AvgLen_fsdev*2)+
	    N_lvmvg*(AvgLen_vg*2) + N_dg*(AvgLen_dg*2) +
	    N_rdsk*(AvgLen_rdsk*2)

	  Calculating the OB2IPCBUFSIZE value
	  -----------------------------------
	  OB2IPCBUFSIZE > max (MsgSize_BSM_R1, MsgSize_R1_R2)

	  RESTORE NOTE:
	  -------------
	  If restore is started using the sapbda utility,
	  the variable OB2IPCBUFSIZE must be exported to
	  environment prior to starting sapbda.

	  Known problems:
	  ---------------
	  If the calculated variable OB2IPCBUFSIZE is correctly
	  set, but is still too small for the file list to fit
	  into the message buffer, the session will fail with
	  the following error seen in the report:

	  BR295I Splitting mirror disks...
	  BR280I Time stamp <time>
	  BR279E Return code from '/opt/omni/lbin/ob2smbsplit
	     /<sap_homedir_path>/.<filename>.lst': 2
	  BR299E Split/resynchronization of mirror disks failed

	  In this case the variable OB2IPCBUFSIZE must be
	  recalculated to appropriate value. See above how to
	  determine it.

	  Part of SSPUX410_033.

	Change Request: H555008832
	  Last message from Disk Agent is sometimes lost. This
	  causes Disk Agent's status reported as "Failed".

	  Resolution:
	  New environment variable:
	    OB2VBDASLEEPBEFORECLOSE
	  is introduced.
	  Its default value is 0. Setting it to a positive
	  number, in /<OMNIBACK_HOME>/.omnirc file, it specifies
	  number of seconds to pass before Disk Agent completes
	  after sending the last block of data.
	  Sleep time insignificantly influences backup
	  performance.

	Change Request: H555008887
	  In environments where the firewall between Cell Server
	  and client(s) with firewall idle timeout of <x>
	  minutes is present, it can happen that an agent is in
	  idle state for the amount of time longer than mentioned
	  timeout. In such cases, firewall breaks the connection
	  between Cell Server and the client(s).

	  Resolution:
	  New environment variable OB2IPCKEEPALIVE is introduced.
	  Setting its value to any of YES, TRUE, ON or 1 in
	  /opt/omni/.omnirc file on Cell Server causes sending a
	  dummy package from time to time in order to keep the
	  connection open.

	  Part of SSPUX410_046.

	Change Request: H555008908
	  By design, whenever there are no objects backed up,
	  OmniBack II ends session as failed.

	  Resolution:
	  Two new global variables have been introduced:

	  a) SessSucessfullWhenNoObjectsBackedUp
	     Setting this variable to 1 user can change the
	     OmniBack II behavior in order to end the session
	     as successful when there are no objects backed up.

	  b) TreatScriptReturnAsNormal
	     Setting this variable to a certain number instructs
	     OmniBack II to treat all the script returns equal
	     to the specified number as normal.

	Change Request: H555008927
	  Barlists are members of a group which is not displayed
	  under reporting group in GUI Reporting.

	  Resolution:
	  Barlists are moved to a group that is displayed in GUI.

	Change Request: H555008950
	  If "omnidbutil -cdbsync" is started on the
	  Manager-of-Managers client, local Media Management
	  Database (MMDB) is used for database synchronization.

	  Resolution:
	  If "omnidbutil -cdbsync" is running on a
	  Manager-of-Managers client, it issues an
	  error message and stops the operation.

	Change Request: H555008998
	  When a host backup session is using WakeOnLan option,
	  it can not retry using specified value from the
	  SmMaxAgentStartupRetries option and there are no
	  mechanism to specify the timeout between retries.

	  Resolution:
	  When a host backup session is using WakeOnLine option,
	  it can retry using specified value from the
	  SmMaxAgentStartupRetries option and specified timeout
	  value from MinDelayForConnectionRetry option.

	Change Request: H555009008
	  Tree options are not entered into OmniBack II database
	  during host backup of nested mountpoints.

	  Resolution:
	  Tree options are entered in to OmniBack II database.

	Change Request: H555009017
	  In case that mount request appears at the beginning
	  of the backup, load balancing does not work correctly.
	  After the confirmation of mount request, filesystem
	  which is supposed to be started as the first one,
	  is started as the last one.

	  Resolution:
	  Load balancing is improved in order to work correctly
	  in case of mount request.

	Change Request: H555009053
	  In case when only Single Server Edition license
	  is applied, Backup Session Manger aborts the session
	  before checking if there was an attempt to put the
	  locked device in a queue.

	  Resolution:
	  Backup Session Manger checks if there is an attempt
	  to put the locked device in a queue. If this is the
	  case it check for the Single Server Edition license.

	  Part of SSPUX410_052.

	Change Request: H555009061
	  In Manager-of-Managers configuration where Database
	  Session Manager acts as a gateway for direct access to
	  Media Management Database, main Database Session
	  Manager is not aware of pools list report and cannot
	  get report information from the Media Management
	  Database.

	  Resolution:
	  Database Session Manager can get pools list report
	  information from the Media Management Database.

	Change Request: H555009083
	  During catalog import OmniBack II tries to remove
	  the old binary files and create new ones. In case
	  that old files do not exist, catalog import fails.

	  Resolution:
	  Catalog import is improved in order not to abort,
	  in case that Detail Catalog Binary Files do not
	  exist.

	Change Request: H555009153
	  Restore Session Manager (RSM) does not include
	  the information about data written when updating
	  Graphical User Interface (GUI) Disk Agent (DA)
	  context.

	  Resolution:
	  The information about data written is added to
	  Restore Session Manager (RSM) messages sent to
	  Graphical User Interface (GUI).

	Change Request: H555009194
	  Data type 'Long' does not allow numbers bigger than 2TB.

	  Resolution:
	  Reported Total blocks and Used blocks of medium are
	  limited to 2TB.

	Change Request: H555009209
	  a)Device that was locked during backup session,
	    can not be unlocked using Cancel Device option and
	    it is not available for another session.

	  b)If backup is started with reconnect option, in case
	    that Monitor is closed, OmniBack II reports Error that
	    connection to Monitor was lost. Session continues and
	    completes successfully.

	  Resolution:
	  a)Device is unlocked for another session.

	  b)Only lost connections with Disk Agent (DA) or Media
	    Agent (MA) are reported as error.

	  Part of SSPUX410_056.

	Change Request: H555009263
	  Files names with new line are not handled correctly.

	  Resolution:
	  "readdb" and "writedb" was changed so that file names
	  with new line are handled correctly.

	Change Request: H555009286
	  When Recycling or exporting original medium from
	  OmniBack II database purge deletes Detail Catalog
	  Binary Files (DCBF) even if the copy medium is still
	  protected in the OmniBack II database. In addition
	  importing catalog from copy is not possible.

	  Resolution:
	  Catalog import from copy medium is possible.

	  Part of SSPUX410_053.

	Change Request: 8606245960
	  GUI is not able to handle nested mount points.
	  When GUI receives excluded directory from datalist
	  file it assumes that the part of the string between
	  first and second slash represents mount point.
	  Besides this, mount point is shown in GUI as a
	  mountpoint and as directory.

	  Resolution:
	  GUI is aware of nested mountpoints.

	Change Request: 8606280024
	  OmniBack II does not properly create list of sessions
	  for used media in selected timeframe.

	  Resolution:
	  "Extended report on used media" report is removed from
	  reporting.

	PHSS_27454:
	Change Request: H555007590
	  Before loading medium on mount request confirmation
	  database is not checked properly.

	  Resolution:
	  On mount request confirmation database is checked
	  properly.

	Change Request: H555007736
	  Errors that were sent by Disk Agent are doubled.

	  Resolution:
	  OmniBack II reports right number of errors for
	  the backup session.

	Change Request: H555008063
	  In case that integration restore session is started,
	  restore session manager does not check if the device
	  is disabled.

	  Resolution:
	  Restore Session Manager is changed so that the restore
	  will not be started if the device is disabled.

	Change Request: H555008105
	  Backup Session Manager uses incorrect variable when
	  calculating the number of devices used for backup.

	  Resolution:
	  Session Manager uses proper variable.

	  Part of SSPUX410_021.

	Change Request: H555008180
	  If backup protection is specified in a time interval
	  (-days, -weeks) and backup spans over multiple media,
	  "omnidbutil -purge -daily" command which is started by
	  DailyMaintenance process deletes DCBF files for the
	  media used in backup which ran at the same time as
	  the DailyMaintenance.

	  Resolution:
	  "omnidbutil -purge -daily" is improved in order not to
	  remove DCBF files for currently running backups.

	  Part of SSPUX410_022.

	Change Request: H555008242
	  In case that NDMP backup contains large number of
	  files, Backup Media Agent uses large amount of memory.

	  Resolution:
	  Backup Media Agent memory usage is improved so it can
	  backup up to 5 million files.

	Change Request: H555008261
	  In case of a Media Management Database corruption
	  backup can fail due to problems with the media
	  allocation.

	  Resolution:
	  Media allocation is improved.

	Change Request: H555008452
	  In some cases because of incorrect agent exit code
	  Backup Session Manager does not terminate other agents
	  in correct order, which results in Backup Session
	  Manager does not terminate.

	  Resolution:
	  The exit code was changed.

	Change Request: H555008549
	  OmniBack II never looks for the new TB EMC license
	  (B6959CA), but always looks for the old EMC standard
	  license (B6959BA). The same is with the new TB XP
	  license.

	  Resolution:
	  The Backup Session Manager agent looks also for the new
	  TB EMC and TB XP licenses.

	  Part of SSPUX410_030.

	Change Request: H555008606
	  Backup Session Manager does not set the timeout of
	  infinitive seconds for the SNAPA agent, but leaves
	  the timeout set to the value of SmDaIdleTimeout.

	  Resolution:
	  Backup Session Manager sets the timeout of infinitive
	  seconds for the SNAPA agent.

	Change Request: 8606262839
	  Database session manager compares days, not taking
	  into account 15 minute units. Therefore report shows
	  some additional backups that are scheduled past
	  the specified time frame.

	  Resolution:
	  Beside days Database Session Manager compares 15
	  minute units.

	PHSS_26353:
	Change Request: H555006969
	  If RecoveryIndex path is incorrect, the file can
	  not be created. OmniBack II then shows a 'Major'
	  error and aborts the session.

	  Resolution:
	  Messages are changed to 'Warning' and the session is
	  not aborted if the RecoveryIndex path is invalid.

	Change Request: H555007177
	  OmniBack II returns wrong exit code when the client
	  does not return any information.

	  Resolution:
	  The exit code is changed.

	Change Request: H555007218
	  Selecting files for restore within interval that does
	  not include the full backup will trigger an error in
	  the list_full_rest_chain function.

	  Resolution:
	  The function marks an error and sends it to GUI, which
	  will show a message:

	    "You have chosen an interval which does not include
	     all the sessions needed to compose a full restore
	     chain. Please reconnect to the Cell Server".

	Change Request: H555007362
	  Devices are locked with device lock, which can differ
	  from device name. When devices are unlocked, device
	  name is always used. If device name and device lock
	  are not equal, device unlock fails.

	  Resolution:
	  Device lock/unlock policy is synchronized.

	Change Request: H555007364
	  When all the OmniBack II services are up and running,
	  backup is started. If during backup OmniBack II services
	  are stopped due to some reason and all the OmniBack II
	  processes are killed, mmd and crs from OmniBack II
	  services will be unable to start.

	  Resolution:
	  There were some problems with licenses, which were not
	  released properly. Licenses are now released properly.
	  After fix installation, reboot of Cell Server host is
	  highly recommended!

	  Part of SSPUX410_013

	Change Request: H555007383
	  Database file search performance is poor.

	  Resolution:
	  Database search performance is improved.

	Change Request: H555007428
	  Executing an "enter" operation for the slot being
	  used for backup results in backup failure.

	  Resolution:
	  New global option EnterEjectCheckLocking is
	  introduced. If this option is set, Media Management
	  operation checks if slot is locked and does not
	  use it.

	  Part of SSPUX410_012.

	Change Request: H555007455
	  Object protection on the copied medium is set to
	  "None" after original tape protection expires.

	  Resolution:
	  The catalog is now transposed from the source.
	  The object protection for the copied medium is set
	  on the same level as medium protection the catalog
	  is transported from the source.

	Change Request: H555007485
	  Purge advisor incorrectly interprets the growth of
	  the database and reports daily needed purges.

	  Resolution:
	  Purge advisor correctly recognizes the database
	  when purge of the database is needed.

	Change Request: H555007524
	  Backup Session Manager uses incorrect variable when
	  calculating the number of devices used for backup.

	  Resolution:
	  Session Manager uses proper variable.

	Change Request: H555007700
	  In case in which reconnect option is used for backup,
	  it is possible that Media Agent fails due to a protocol
	  error.

	  Resolution:
	  Protocol between Session Manager and Media Agent is
	  changed in order not to acknowledge normal formatted
	  messages.

	  Complete functionality of fix will be available
	  when Media Agent patch PHSS_26357/PHSS_26358 is
	  installed - or successors of it.

	  Part of SSPUX410_017.

	ID = HSLco34429
	  The OB2PORTRANGE variable is not exported.

	  Resolution:
	  The OB2PORTRANGE variable is exported.

	Change Request: 8606248483
	  When a Cell Console client connects to the server,
	  user name, system name and domain are parsed correctly,
	  but IP address is not.

	  Resolution:
	  A new environment variable

	  'OB2CRSSTRICTHOSTNAMECHECKING'

	  is introduced. Setting its value to 1 is to enforce
	  the use of hostnames obtained from IP address.

	PHSS_25962:
	Change Request: H555006771
	  There is no warning reported when one creates a datalist
	  or a barlist with load balancing enabled and minimum
	  number of devices greater than number of configured
	  logical devices.

	  Resolution:
	  Comparison of minimum and configured devices number
	  is implemented.

	Change Request: H555006772
	  Aborting an import session corrupts Omniback internal
	  database.

	  Resolution:
	  Aborting an import session is properly handled and it
	  does not corrupt internal database.

	  If a database corruption has been experienced because
	  of this defect, then after installation of this patch,
	  the corruption can be removed and the import of
	  OmniBack II 3.x tapes be enabled as follows:

	  1. step:
	  Import the problematic tape. The import itself will
	  fail, complaining about catalog and media management
	  database not being in sync. But internally it will
	  remove the suspective media position from the database
	  which makes second step possible.

	  2. step:
	  Import the problematic tape again. This succeeds and
	  results in imported medium and fixed database.

	  Part of SSPUX410_007.

	Change Request: H555006788
	  Device lock counter is not working correctly.

	  Resolution:
	  Device lock counter is working properly and the
	  devices are unlocked after the session ends.

	  Part of SSPUX410_006.

	Change Request: H555006819
	  Object ownership is incorrectly set if it is specified
	  in the datalist.

	  Resolution:
	  Object ownership is correctly set.

	  Part of SSPUX410_015.

	Change Request: H555006843
	  Backup Session Manager abnormally ends in cases when
	  there are more than 100 objects within one data segment.

	  Resolution:
	  Backup Session Manager works properly with unlimited
	  number of objects within one data segment.

	Change Request: H555006868
	  Omniback incorrectly compares selected libraries
	  versus all libraries when creating "List of Media"
	  report.

	  Resolution:
	  "List of Media" is created properly.

	Change Request: 8606229643
	  Omniback does not check whether options have been
	  passed from the command line.

	  Resolution:
	  Additional checking of options is implemented for
	  the case that options have been sent from command
	  line.

	Change Request: H555006757
	  Datalist name is not exported into environment.

	  Resolution:
	  Datalist name is exported into environment.

	Change Request: H555006939
	  When delay between two connections for different
	  Oracle 8 objects is bigger that the value of
	  SmWaitForNewClient global variable, restore hangs.

	  Resolution:
	  Omniback deletes barlist from memory and starts new
	  restore session in case that Restore Session Manager
	  timed out and new connection for restore was accepted.

	Change Request: H555006948
	  Command "omnicc -query" causes memory leaks in
	  Cell Request Server.

	  Resolution:
	  Memory leaks are removed.

	  Part of SSPUX410_001.

	Change Request: H555006968
	  The '-autorecover' option in 'omnidbrestore' command
	  does not set the correct block size for the device.

	  Resolution:
	  The code for setting the block size was corrected.

	Change Request: H555006998
	  If "\" sign is the last character when setting
	  RecoveryIndexDir value, Backup Session Manager fails
	  because of incorrect parsing of the value.

	  Resolution:
	  Any "\" sign that appears at the end of an argument
	  is cut off during the parsing.

	Change Request: H555007081
	  With 1 second inactivity between loops,
	  "omnisv -start_mon" is executed too often.

	  Resolution:

	  New option "-timeout" is added for omnisv. Usage:

	    "omnisv -start_mon -timeout N"

	  where N is time in seconds.

	Change Request: H555007115
	  omnidbutil is not able to connect to Administration
	  Session Manager (ASM).

	  Resolution:
	  Missing fuctionality is added to ASM.

	Change Request: 8606221771
	  Flag for case sensitivity is not checked before
	  search session is executed.

	  Resolution:
	  Case sensitivity flag is always checked.

	Change Request: 8606236143
	  The regular expression that is parsed by the awk script
	  does not return the process ID (PID) which should be
	  killed.

	  Resolution:
	  Regular expression string in awk parse command is
	  changed.

	Change Request: H555007234
	  Objects whose protection has expired are purged from
	  OmniBack internal database during the upgrade.

	  Resolution:
	  New environment variable OB2UPGRADEIGNOREEXPIREDOBJECTS
	  is introduced. Setting its value to 1 in
	  /opt/omni/.omnirc file will purge objects with expired
	  protection during the upgrade. Otherwise, unprotected
	  objects are left intact.

	  Part of the SSPUX410_008.

SR:
	8606325101 H555013764 H555013629 H555013676 H555012114
	H555011996 H555011989 H555013333 H555013315 H555013280
	H555012263 H555012804 H555012346 8606362207 H555012374
	H555012428 H555012097 H555012187 H555012376 H555012377
	H555013469 H555011788 H555011708 H555011451 H555011784
	H555011685 8606324070 H555011230 H555010730 H555010910
	H555011460 H555011119 H555011344 H555010850 H555011264
	H555010860 H555011095 H555010817 H555010638 H555007363
	H555011297 H555011298 H555011379 H555010787 H555009725
	H555009054 H555010269 H555010432 H555010280 H555008723
	H555010030 H555010380 H555010381 H555010285 8606307557
	H555010234 H555009593 8606300821 H555009567 H555009297
	H555009289 H555010075 8606298931 H555010158 H555009895
	H555009877 H555009779 H555009322 H555009721 H555009560
	H555010103 H555009381 H555009382 H555010123 H555009833
	8606289026 H555010043 H555009286 H555008908 H555008891
	H555008927 8606280024 H555008958 H555008887 H555008998
	8606245960 H555009061 H555009053 H555009017 H555009008
	H555009153 H555008722 H555008704 H555008650 H555008641
	H555009209 H555009083 H555009263 H555008651 H555008832
	H555008913 H555008716 H555008680 H555008950 H555009194
	H555008807 H555008690 H555008754 H555008549 8606262839
	H555008105 H555008242 H555008063 H555008180 H555008261
	H555008452 H555008606 H555007590 H555007736 8606248483
	H555007700 H555006969 H555007524 H555007218 H555007362
	H555007903 H555007364 H555007383 H555007428 H555007455
	H555007177 H555007485 H555006757 H555006948 H555006939
	H555006868 H555006968 H555006788 H555007115 H555007234
	8606236143 H555007081 H555006998 8606221771 H555006771
	H555006843 H555006772 8606229643 H555006819

Patch Files:
	/opt/omni/lbin/bsm
	/opt/omni/lbin/rsm
	/opt/omni/lbin/dbsm
	/opt/omni/lbin/crs
	/opt/omni/lbin/dbbda
	/opt/omni/lbin/asm
	/opt/omni/lbin/msm
	/opt/omni/lbin/mmd
	/opt/omni/lib/libob2eadm.sl
	/opt/omni/lib/libob2ecdb.sl
	/opt/omni/lib/libob2ecmn.sl
	/opt/omni/lib/libob2emmdb.sl
	/opt/omni/lib/lib_rdm.sl
	/opt/omni/sbin/omnidbutil
	/opt/omni/sbin/omnitrig
	/opt/omni/sbin/omnidbrestore
	/opt/omni/sbin/omnisv
	/opt/omni/sbin/omnisv11
	/opt/omni/sbin/omnidbcheck
	/opt/omni/sbin/utilns/get_info
	/opt/omni/.CII_CS
	/opt/omni/newconfig/etc/opt/omni/options/global
	/opt/omni/newconfig/etc/opt/omni/sg/csfailover.ksh

what(1) Output:
	/opt/omni/lbin/bsm:
		HP OpenView OmniBack II A.04.10; internal build PHSS
			_30343/PHSS_30344, built on Wed Jun  9 13:54
			:33 2004
	/opt/omni/lbin/rsm:
		HP OpenView OmniBack II A.04.10; internal build PHSS
			_31051/PHSS_31052, built on Mon Sep 20 09:17
			:08 2004
	/opt/omni/lbin/dbsm:
		HP OpenView OmniBack II A.04.10; internal build PHSS
			_31051/PHSS_31052, built on Mon Sep 20 09:13
			:36 2004
	/opt/omni/lbin/crs:
		HP OpenView OmniBack II A.04.10; internal build PHSS
			_31051/PHSS_31052, built on Mon Sep 20 09:19
			:00 2004
	/opt/omni/lbin/dbbda:
		HP OpenView OmniBack II A.04.10; internal build PHSS
			_29865/PHSS_29866, built on Thu Nov 20 17:19
			:46 2003
	/opt/omni/lbin/asm:
		HP OpenView OmniBack II A.04.10; internal build PHSS
			_29865/PHSS_29866, built on Thu Nov 20 17:16
			:28 2003
	/opt/omni/lbin/msm:
		HP OpenView OmniBack II A.04.10; internal build PHSS
			_31051/PHSS_31052, built on Mon Sep 20 09:17
			:56 2004
	/opt/omni/lbin/mmd:
		HP OpenView OmniBack II A.04.10; internal build PHSS
			_30343/PHSS_30344, built on Wed Jun  9 13:56
			:46 2004
	/opt/omni/lib/libob2eadm.sl:
		HP OpenView OmniBack II A.04.10; internal build PHSS
			_31051/PHSS_31052, built on Mon Sep 20 09:12
			:36 2004
	/opt/omni/lib/libob2ecdb.sl:
		HP OpenView OmniBack II A.04.10; internal build PHSS
			_31051/PHSS_31052, built on Mon Sep 20 09:10
			:54 2004
	/opt/omni/lib/libob2ecmn.sl:
		HP OpenView OmniBack II A.04.10; internal build PHSS
			_31051/PHSS_31052, built on Mon Sep 20 09:08
			:42 2004
	/opt/omni/lib/libob2emmdb.sl:
		HP OpenView OmniBack II A.04.10; internal build PHSS
			_31051/PHSS_31052, built on Mon Sep 20 09:09
			:35 2004
	/opt/omni/lib/lib_rdm.sl:
		None
	/opt/omni/sbin/omnidbutil:
		HP OpenView OmniBack II A.04.10; internal build PHSS
			_30128/PHSS_30129, built on Wed Jan 14 16:16
			:49 2004
	/opt/omni/sbin/omnitrig:
		HP OpenView OmniBack II A.04.10; internal build PHSS
			_29865/PHSS_29866, built on Thu Nov 20 17:16
			:56 2003
	/opt/omni/sbin/omnidbrestore:
		HP OpenView OmniBack II A.04.10; internal build PHSS
			_29865/PHSS_29866, built on Thu Nov 20 17:17
			:27 2003
	/opt/omni/sbin/omnisv:
		HP OpenView OmniBack II A.04.10; internal build PHSS
			_29865/PHSS_29866, built on Thu Nov 20 17:16
			:46 2003
	/opt/omni/sbin/omnisv11:
		HP OpenView OmniBack II A.04.10; internal build PHSS
			_29865/PHSS_29866, built on Thu Nov 20 17:21
			:32 2003
	/opt/omni/sbin/omnidbcheck:
		HP OpenView OmniBack II A.04.10; internal build PHSS
			_29865/PHSS_29866, built on Thu Nov 20 17:10
			:27 2003
	/opt/omni/sbin/utilns/get_info:
		None
	/opt/omni/.CII_CS:
		None
	/opt/omni/newconfig/etc/opt/omni/options/global:
		None
	/opt/omni/newconfig/etc/opt/omni/sg/csfailover.ksh:
		None

cksum(1) Output:
	2715681135 1552447 /opt/omni/lbin/bsm
	1742254235 1314395 /opt/omni/lbin/rsm
	568499699 1543556 /opt/omni/lbin/dbsm
	3548841804 809435 /opt/omni/lbin/crs
	2023156276 736141 /opt/omni/lbin/dbbda
	1363728389 801250 /opt/omni/lbin/asm
	1196756087 908111 /opt/omni/lbin/msm
	3378774619 608483 /opt/omni/lbin/mmd
	2013455562 889692 /opt/omni/lib/libob2eadm.sl
	3740434953 922438 /opt/omni/lib/libob2ecdb.sl
	6674627 931552 /opt/omni/lib/libob2ecmn.sl
	3069275248 750239 /opt/omni/lib/libob2emmdb.sl
	1057310634 747217 /opt/omni/lib/lib_rdm.sl
	2564537576 920041 /opt/omni/sbin/omnidbutil
	4095712355 571355 /opt/omni/sbin/omnitrig
	1670052680 550548 /opt/omni/sbin/omnidbrestore
	1420691591 419493 /opt/omni/sbin/omnisv
	870777921 446464 /opt/omni/sbin/omnisv11
	1200002667 817496 /opt/omni/sbin/omnidbcheck
	2413169079 26880 /opt/omni/sbin/utilns/get_info
	60206861 11133 /opt/omni/.CII_CS
	1522663409 30114 /opt/omni/newconfig/etc/opt/omni/options/
		global
	4109013506 2408 /opt/omni/newconfig/etc/opt/omni/sg/
		csfailover.ksh

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies:
	Some of the defect fixes contained in this patch
	depend on the following other patches or their
	successors in order to completely resolve the problem:

	PHSS_30829:
	Disk Agent (DA) packet patch,
	release date: Available
	Change Request: H555012804
	PHSS_30829 is required for this defect fix.

	PHSS_30348:
	Cell Console (CC) packet patch,
	release date: Available
	Change Request: H555009725
	Change Request: H555009877
	Change Request: H555009286
	Change Request: H555008927
	Change Request: H555008807
	Change Request: H555007485
	Change Request: 8606245960
	Change Request: 8606280024
	PHSS_30348 is required for these defect fixes.

	PHSS_30568:
	SAP packet patch,
	release date: Available
	Change Request: H555008908
	Change Request: H555008807
	PHSS_30568 is required for these defect fixes.

	PHSS_28341:
	EMC packet patch,
	release date: Available
	Change Request: H555008807
	PHSS_28341 is required for this defect fix.

	PHSS_30339:
	Core packet patch,
	release date: Available
	Change Request: H555008950
	Change Request: H555008807
	Change Request: H555007590
	Change Request: H555006771
	Bad catalog access messages are displayed without
	PHSS_30339.

	PHSS_30570:
	SureStore Agent (SSEA) packet patch,
	release date: Available
	Change Request: H555008887
	PHSS_30570 is required for this defect fix.

	PHSS_30141:
	Media Agent (MA) packet patch,
	release date: Available
	Change Request: H555010787
	Change Request: H555008680
	Change Request: H555008242
	Change Request: H555007700
	Change Request: H555009054
	Change Request: H555010030
	PHSS_30141 is required for these defect fixes.

Supersedes:
	PHSS_25962 PHSS_26353 PHSS_27454 PHSS_27602 PHSS_28731 PHSS_28740
	PHSS_29865 PHSS_30128 PHSS_30343

Equivalent Patches:
	PHSS_31052:
	s700: 11.00 11.11
	s800: 11.00 11.11

Patch Package Size: 4580 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHSS_31051

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHSS_31051.depot

	By default swinstall will archive the original software in 
	/var/adm/sw/patch/PHSS_31051.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE. 

	WARNING: If this file exists when a patch is installed, the 
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHSS_31051.text file to 
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHSS_31051.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
	PHSS_31051:
	NOTE!
	This Patch has to be installed on the Cell Manager host.
	OmniBack II server must be shutdown before installing
	the patch. Use the following command for shutting down
	the server:

	   "/opt/omni/sbin/omnisv.sh stop".

	After the installation is complete, restart OmniBack II
	server using "/opt/omni/sbin/omnisv.sh start".

	In some cases, when machine is rebooted, "omnidbutil -clear"
	is executed before rds service is up and running. As a
	result, this command  is  not  executed  and  error is
	reported to rc.log. In such cases delay in environment
	variable

	OmniDBUtilClearSleep=DelayInSeconds

	in global file should be set. Default value is set to 0.

	
	Patch includes the following Site Specific Patches:
	   SSPUX410_001
	   SSPUX410_006
	   SSPUX410_007
	   SSPUX410_008
	   SSPUX410_012
	   SSPUX410_013
	   SSPUX410_015
	   SSPUX410_017
	   SSPUX410_021
	   SSPUX410_022
	   SSPUX410_030
	   SSPUX410_033
	   SSPUX410_039
	   SSPUX410_043
	   SSPUX410_046
	   SSPUX410_052
	   SSPUX410_053
	   SSPUX410_056
	   SSPUX410_061
	   SSPUX410_070
	   SSPUX410_071
	   SSPUX410_074
	   SSPUX410_077
	   SSPUX410_082
	   SSPUX410_090
	   SSPUX410_091

	A Site Specific Patch is a temporary hotfix that
	you might have received from HP Support if you
	have encountered a problem with Data Protector
	for which no General Release patch was or is
	available yet.

	If any newer Site Specific Patch - that is
	one with a higher number - for the Cell Manager
	is installed on your system, then you
	must re-apply this SSP after installing
	this Cell Manager patch.