Patch Name: PHSS_30823

Patch Description: s700_800 10.X OV OB3.50 patch - CS packet

Creation Date: 04/07/28

Post Date: 04/08/06

Hardware Platforms - OS Releases:
	s700: 10.00 10.01 10.10 10.20
	s800: 10.00 10.01 10.10 10.20

Products:
	OmniBackII A.03.50

Filesets:
	OMNIBACK-II.OMNI-CS,A.03.50

Automatic Reboot?: No

Status: General Release

Critical: No

Path Name: /hp-ux_patches/s700_800/10.X/PHSS_30823

Symptoms:
	PHSS_30823:
	Change Request: 8606362207
	  Backup session cannot be aborted when minimum load
	  balancing equals 2 and first 2 drives report an error.

	Change Request: H555010860
	  Scheduled backups do not start.

	Change Request: H555011989
	  The post-exec script is started even though the pre-exec
	  script has not been run and the "OB2FORCEPOSTEXEC"
	  option is NOT set.

	Change Request: H555013036
	  Pre-exec script does not execute after the Backup
	  Session Manager (BSM) blocked on devices and a post-exec
	  script executes even if session is failing.

	Change Request: H555013175
	  When the minimum load balancing is set to 2 and 2 drives
	  are in failure, the session cannot be stopped.

	Change Request: H555013280
	  When running the "omnicellinfo -allbdf" command, the
	  following error appears:

	   "Failed to locate disks on host <hostname>!
	    Host may be unreachable."

	PHSS_29407:
	Change Request: H555009725
	  When trying to limit the number of devices used in
	  one session, limitation is not working.

	Change Request: H555010075
	  When virtual name does not match the hostname of the
	  host currently running as the cell manager, all the
	  scripts are considered as remote exec scripts.

	Change Request: H555010103
	  Imported catalog from media has catalog protection
	  set to None.

	Change Request: H555010285
	  Medium import operation fails with message:

	   "|Critical| From: MSM@<host> "datalist" Time:<time>
	    |65:99|Import failed with possible cause:
	     this media already has valid copy in DB."

	Change Request: H555010298
	  Backup Session Manager changes Media Agent connection
	  timeout and Media Agent is aborted too fast.

	Change Request: H555010376
	  When mount request is issued at the beginning of
	  Informix backup, BackupDeviceIdle timeout expires,
	  Backup session can not be aborted and BSM starts
	  using a lot of memory.

	Change Request: H555010504
	  Standard database purge sessions are not started.

	Change Request: H555010730
	  crs repeatedly ends abnormally.

	Change Request: 8606300821
	  Executing "crs -redebug" from command line displays
	  a usage summary.

	PHSS_28727:
	Change Request: H555009297
	  After aborting host backup the object post exec script
	  does not execute.

	Change Request: H555009560
	  Backup run twice when daylight saving time is changed.

	Change Request: H555009843
	  While backup with reconnect option is in progress and
	  BSM loses connection to monitor the message appears:

	    "[Warning] From: BSM@<host> "<device>"  Time: <time>
	     [61:2013] Some of the backup devices are occupied.
	     Session is waiting for all the devices to get free.

	     [Major] From: BSM@<host> "<device>"  Time: <time>
	     [61:3003] Lost connection to Monitor named "noname"
	     on host <host>.
	     Ipc subsystem reports: "IPC Read Error
	     System error: [232] Connection reset by peer"

	Change Request: H555009863
	  When backing up very large SAP databases with SSEA
	  split mirror, backups can fail with error:

	    "BR280I Time stamp <time>
	     BR296I Split of mirror disks successful
	     BR274E File /<sapdata_path>/system.data1 not found"

	PHSS_28021:
	Change Request: H555008533
	  Informix backup hangs if a resource type is backed up
	  to a different device than the other resource types.

	Change Request: H555008690
	  If a Manager-of-Managers Server is also a
	  MC/ServiceGuard virtual node, then the command:
	  "omnirpt -report list_sessions -timeframe
	   <start_hours_ago><hours_duration>
	   -multicell -no_multiple"
	  lists the matching sessions from this node twice.

	Change Request: H555008780
	  Queries from client Cell Server in MoM environment
	  with CMMDB fail with:

	   "[12:1012] Cannot access the file."

	Change Request: H555008807
	  When backing up SAP integration with EMC split mirror
	  functionality, not all the SAP files are backed up.

	Change Request: H555008832
	  OmniBack internal database backup fails with an error:

	  "[Major] From: BSM@<computer> "<object>"  Time: <time>
	   [61:3003] Lost connection to VBDA named <object>
	    on host <host>.
	    Ipc subsystem reports: "IPC Read Error
	    System error: [232] Connection reset by peer"

	Change Request: H555008927
	  While configuring OmniBack II reports using GUI, only
	  datalists are listed (barlists are missing).

	Change Request: H555008892
	  When performing omnimlist -catalog on media, the
	  program exits and debug.log contains this
	  Interprocess Communication error:

	  08/06/02 11:13:15  OMNIMLIST.1224.0
	  ["/src/lib/ipc/ipc.c /main/r31_split/16":3434]
	  A.03.50 b216
	  [ipc_receiveDataEx] buffer 102400 bytes to
	  small to receive data 258487 bytes => ignored

	PHSS_26889:
	Change Request: H555008261
	  Backup fails with an error:

	    "Internal error. Allocation from library failed.
	     The Media Management daemon reports:
	      Internal error: DbaXXXX functions."

	Change Request: H555008410
	  The earlier Patch PHSS_26348 introduced behavior
	  that can cause database integration
	  (for example Oracle or SAP) backups to fail.
	  With PHSS_26348 installed, OmniBack does not properly
	  lock the logical devices to prevent concurrent access
	  by multiple sessions.  As a result, database integration
	  backups may fail instead of waiting for the device
	  to become free.

	Change Request: H555008452
	  Backup Session Manager does not terminate after
	  the time specified in the SmDaIdleTimeout variable
	  when connection to Disk Agent and Media Agent is lost.

	Change Request: 8606262839
	  Configuration report shows an incorrect list of
	  scheduled backups.

	PHSS_26347:
	Change Request: H555003134
	  Device maintenance from command line is not sufficient.

	Change Request: H555006924
	  The message for the mount request is not in proper
	  format when forwarded to ITO.

	Change Request: H555007191
	  If pre-exec script does not complete in
	  ScriptOutputTimeout time (default 15 minutes), Backup
	  Session Manager lopps and can not be aborted.

	Change Request: 8606221771
	  Case sensitive search does not work.

	Change Request: 8606236143
	  Not all session manager processes are correctly stopped
	  using csailover.ksh script.

	Change Request: H555007428
	  Backup fails with error:

	    "[Major] From: BMA@<HOST>  Time:<TIME>
	     [90:64] Can not unload exchanger medium
	       (Storage slot is occupied.)".

	Change Request: 8606248483
	  Address of a Cell Console client is incorrectly
	  handled.

	Change Request: H555007796
	  omnirpt failes after the installation of
	  PHSS_25002/25003.

	PHSS_25002:
	Change Request: B555011718
	  OmniBack II issues a mount request for tape during
	  the restore session.

	Change Request: H555005922
	  Backup is waiting for all pre/post-exec scripts to
	  finish before proceeding.

	Change Request: H555005975
	  Purge of filenames aborts daily.

	Change Request: H555006248
	  Restore session fails with error:

	    "Can not load exchanger medium.".

	Change Request: H555006710
	  Session ends as 'Failed' because OmniBack II tries
	  to back up non existent SAP redo logs.

	Change Request: H555006771
	  Load balancing is not working properly.

	Change Request: H555006799
	  OmniBack reports that medium copy session finished
	  successfully although it failed.

	Change Request: H555006810
	  When OmniBack II Integration backup is aborted,
	  another complete sesson starts and finishes backup of
	  remaining database objects.

	Change Request: 8606217323
	  Cell Request Server and session managers frequently
	  abort.

	PHSS_24658:
	Change Request: 8606179334
	   OmniBack II creates duplicated tape labels.

	Change Request: 8606195237
	   OmniBack II internal database owner is not
	   properly set after configuring OmniBack II in
	   MC/ServiceGuard environment.

	Change Request: H555004871
	  Browsing of a filesystem in Restore GUI sometimes
	  fails with an error:

	    "Cannot browse from root. Please specify
	     starting point.".

	Change Request: H555005681
	  Session status is "Completed/Failures" although there
	  is no indication of errors.

	Change Request: H555005149
	  If Cell Request Service (CRS) is restarted in cluster
	  aware mode, error:

	    "-2 starting omnidbutil -clear!"

	  occurs in cluster.log file.

	Change Request: H555005402
	  Omnitrig fails with an error:

	    "Error parsing schedule purge_schedule.".

	Change Request: H555005697
	  Adding OmniBack II licenses in MC/ServiceGuard
	  environment fails with an error:

	    "Cell Server host IP is not in IP range.".

	Change Request: H555005583
	  Load balancing uses less devices than expected.

	Change Request: H555005732
	  OmniBack II issues mount request, but it can not be
	  confirmed because the tape drive is busy.

	Change Request: H555005680
	  Post-exec script specified for a virtual hostname does
	  not start if pre-exec script fails.

	Change Request: H555005917
	  Tape import is reported successful although it is not.

	Change Request: H555005973
	  Restore session fails with error:

	    "Can not load exchanger medium.".

	PHSS_23470:
	Change Request: 8606166806
	  Session status indicates "Completed" although one of the
	  agents failed.

	Change Request: B555008272
	  Devbra reports:

	    "[90:11] Unrecognized option "/" => ignored".

	Change Request: H555003831
	  Backup of SAP archive logs fails with:

	    "[Major] From: OB2BAR@<hostname> <ORASID> Time:<time>
	       Can not read BSM message (IPC Read Error
	       System error: [232] Connection reset by peer.)".

	Change Request: H555004061
	  Restore does not work correctly after the mount
	  request confirmation.

	Change Request: H555004021
	  OmniBack Session Report contains many

	    "[Warning] From: BSM@<hostname> <DBNAME> Time:<time>
	     Received connect from BAR Backup DA on host <host>
	     that is not specified in CLIENT statement in the
	     barlist."

	  warning messages.

	Change Request: B554000841
	  Error:

	    "Hostname is not in IP range."

	  is reported after service guard fails over to a
	  secondary host.

	Change Request: B554000869
	  Pre- and post-exec scripts return invalid exit status.

	Change Request: H555004026
	  After upgrade to OmniBack II 3.50, backup to STK 9840
	  device fails with an error:

	    "Invalid physical device type => aborting."

	Change Request: H555004027
	  Host backup fails if host has more than 600
	  mountpoints.

	Change Request: H555004364
	  If Sybase backup fails before OB2BAR is started,
	  a Major message is reported in the session output,
	  but session status is "Completed".

	Change Request: H555004452
	  Objects are lost from OmniBack II internal database
	  after the execution of "omnidbutil -cdbsync" command.

	Change Request: H555004475
	  Full Oracle backup can be appended to a medium in a
	  pool with "append incremental only" property.

	Change Request: -
	  MS Exchange 2000 scheduled backups do not start.

	Change Request: B554000372
	  Backup Session Manager is sending wrong SNMP messages to
	  ITO Management server.

	Change Request: H555005234
	  When restarting failed sessions multiple sessions are
	  created.

	Change Request: H555005624
	  Import of session fails.

	PHSS_23105:
	Change Request: H555004350
	  Bad backup performance after upgrade from OmniBack II
	  2.55 or 3.00.

	Change Request: H555004454
	  Execution of command

	    "omnirpt -report used_media -timeframe <t1> <t2>"

	  results in the following error message:

	    "DB[4] internal error [-16] record not connected
	     to set".
	    "DB[4] internal error [-16] record not connected
	     to set".

	PHSS_22369:
	Change Request: 8606144294
	  Informix barlists are not converted into a OmniBack II
	  3.50 format after an upgrade from OmniBack II 2.55.

	Change Request: 8606147687
	  "List from media" ignores "See private objects" option.

	Change Request: B554000487
	  Permanent license shows up as out of IP range.

	Change Request: B554000496
	  Backup session is not logged in the database if file
	  pattern search is performed in parallel.

	Change Request: B554000550
	  After importing a tape from 2.55 to 3.x cell some of
	  the files can not be restored.

	Change Request: B554000597
	  After the upgrade from OmniBack II 3.00 to 3.50, a
	  warning

	    "Received connect from BAR backup DA on host
	     <hostname> that is not specified in CLIENT statement
	     in barlist."

	  appears on a client with multiple lan cards.

	Change Request: B554000611
	  A backup of MC/SG can not be aborted after the switch.

	Change Request: 8606159187
	  Directories are backed up even if excluded in host
	  backup.

	Change Request: B554000623
	  Omnitrig does not pass debugging parameters to omnirpt.

	Change Request: B554000712
	  OmniBack II ignores the tape loaded after the mount
	  request for SCSI-II changer device.

	Change Request: -
	  Option "-change_objname" does not work properly.

	Change Request: B554000630
	  List of media fails with an error:

	    "Medium details not available.
	     Medium owned by Cell Manager: <hostname>."

	Change Request: B554000813
	  Copy session of write-protected tape is aborted and
	  cleaning tape is requested in the source tape drive.

	Change Request: B555002886
	  Internal database server (RDS) abnormally ends due to
	  lack of memory.

	Change Request: B554000831
	  Internal database server (RDS) abnormally ends during
	  a SAP restore.

	Change Request: H555003726
	  Sessions are disappearing from OmniBack II database.

	Change Request: H555003740
	  OmniBack II database gets corrupted.

	Change Request: H555003729
	  Sessions are disappearing from OmniBack II database.

	Change Request: H555003702
	  Execution of commands "omnidb -session <sess_id>" and
	  "omnirpt -report used_media -timeframe <n> <n>"
	  reports that the database is corrupt, but omnidbcheck
	  reports no problem.

Defect Description:
	PHSS_30823:
	Change Request: 8606362207
	  OmniBack II tries to lock new devices. When they are not
	  available, it loops indefinitely.

	  Resolution:
	  If there is an unusable device and minimum load balance
	  is set higher than 1, it is decreased.

	Change Request: H555010860
	  Omnitrig process does not start any backup at all if the
	  "holidays" file includes a syntax error. The "holidays"
	  file is read at the beginning, before omnitrig starts
	  the scheduled backups. In case of a syntax error,
	  omnitrig aborts execution, which prevents omnitrig to
	  read the scheduler files and to execute backups at
	  scheduled times.

	  Resolution:
	  Omnitrig behavior in case of syntax errors in the
	  "holidays" file is changed. Now omnitrig continues with
	  an execution in such cases, which means that the syntax
	  errors are skipped, logged to the "debug.log" file and
	  most important scheduled backups are started.

	Change Request: H555011989
	  The post-exec script is set to execute if the pre-exec
	  script executes without errors. The problem occurs when
	  the session is aborting and the pre-exec script has not
	  been executed yet as its execution status is still set
	  to OK.

	  Resolution:
	  Added additional checking for session manager state to
	  not execute the post-exec script when the state is set to
	  "BSM_STATE_ABORTED".

	  Part of SSPUX350_091.

	Change Request: H555013036
	  Post-exec script may execute even if a pre-exec script
	  has not been executed. The same behavior appears when a
	  session is failing. The pre- and post-exec script
	  behavior differs from documented.

	  Resolution:
	  Pre- and post-exec scripts function as documented. A
	  post-exec script is not executed when session is failing
	  and a pre-exec script has not been executed.

	  Part of SSPUX350_092.

	Change Request: H555013175
	  OmniBack II tries to lock devices, but they are not
	  available, so it is looping indefinitely.

	  Resolution:
	  If there is an unusable device and minimum load balance
	  is higher than 1, it is decreased.

	Change Request: H555013280
	  "Omnicellinfo" returns random responses.

	  Resolution:
	  "Omnicellinfo" return status changed.

	PHSS_29407:
	Change Request: H555009725
	  Global variable MaxMAperSM is not handled correctly.

	  Resolution:
	  When MaxMAperSM global variable is less then
	  maximum number of devices specified in datalist
	  (load balancing), MaxMAper-SMvalue is used.

	Change Request: H555010075
	  When session is configured using post- or pre-exec
	  scripts on virtual machines, no check is being made to
	  determine if IP address is local. Only hostnames
	  (strings) are compared.

	  Resolution:
	  Additional checking is made to determine
	  if an IP address is local.

	Change Request: H555010103
	  When importing catalog, its protection is set to
	  None. When catalog is imported with protection None,
	  it is purged out of database first time purge is
	  started.

	  Resolution:
	  Catalog protection is changed to Permanent
	  after importing.

	Change Request: H555010285
	  It can happen that media positions remain in
	  database. When you try to import the medium
	  an error occurs.

	  Resolution:
	  New "DbForceImportIfPositionsExist" variable is
	  introduced in global file. When set to 1 it forces
	  medium import even if medium positions exist.

	Change Request: H555010298
	  Backup Session Manager changes the timeout value
	  for Media Agent from SmMaIdleTimeout (320 min)
	  to SmPeerId (15) min. This timeout is too low for a
	  BAR session.

	  Resolution:
	  If the session is a BAR session OmniBack uses
	  the timeout value from the SmMaIdleTimeout
	  variable, for other session modes SmPeerId is used.

	Change Request: H555010376
	  Omniback II is trying to abort BMA which already
	  has some assigned objects.

	  Resolution:
	  Before aborting BMA Omniback II checks if any
	  objects are assigned to BMA.

	  Part of SSPUX350_090.

	Change Request: H555010504
	   Standard purge is not recognized by the scheduler.

	  Resolution:
	  Standard purge is handled in the same way as full
	  database purge.

	Change Request: H555010730
	  On HP-UX 11.x systems it is possible that accept()
	  command on a newly created socket fails due to
	  error "ENOBUFS". crs is aborted when such error
	  occurs.

	  Resolution:
	  crs works normally.

	Change Request: 8606300821
	  While parsing arguments passed to "crs" binary, missing
	  arguments after "-redebug" options are not expected
	  which causes usage to be displayed.

	  Resolution:
	  When arguments for redebug are not passed on command
	  line, trace file is examined. If trace file does not
	  include parameters, help is written.

	PHSS_28727:
	Change Request: H555009297
	  Before executing the object post-exec script,
	  OmniBack II checks if session is aborting.
	  If it is, then script does not execute.

	  Resolution:
	  Global variable PostExecOnAbortHostBackup was added.
	  If this global variable is set to 1, the post-exec
	  script will execute even if the session is aborting.

	Change Request: H555009560
	  The algorithm, that handles the daylight saving time
	  changes is incomplete.

	  Resolution:
	  The algorithm is changed for both time changes:
	  02h->03h and 03h->02h.

	Change Request: H555009843
	  If BSM loses connection to monitor message appears.
	  The problem (reconnect) should only be reported
	  for agents (DA, MA...).

	  Resolution:
	  The function is modified to check if the connection
	  with the agent (DA, MA ...) is broken. If BSM loses
	  connection to monitor, no messages are displayed.

	  Part of SSPUX350_089.

	Change Request: H555009863
	  In split mirror environment with very large SAP
	  databases, it can happen that the size of the message
	  buffer that OmniBack II uses is too small to fit in
	  for the complete list of SAP files to be backed up.

	  Resolution:
	  New environment variable is introduced: OB2IPCBUFSIZE.
	  In order to solve this problem, the buffer size can
	  be increased by setting the OB2IPCBUFSIZE environment
	  variable in the .omnirc file on CM, R1 and R2 hosts,
	  specifying the desired amount of memory to be used
	  for the buffer.

	  For determining buffer size please see the Resolution
	  of Id = HSLco37193 below.

	  Part of SSPUX350_088.

	PHSS_28021:
	Change Request: H555008533
	  With Informix integration backup, it is possible to
	  specify which resource type will be backed up by which
	  device. If most of the resource types are backed up to
	  n devices, but the L (Log) resource type is backed up
	  to a separate, additional device, and load balancing
	  is set to (max=n, min=n), then the session will hang
	  because it tries to lock n+1 devices for all the
	  resource type backups.

	  Resolution:
	  OmniBack now unlocks devices, if they were not used for
	  any backup for a certain amount of time. It also stops
	  media agents that have not had any backup agents
	  assigned to them for the timeout period. With both
	  changes (unlock device, stop media agent), it can start
	  new media agents, required by specific resource type
	  backup agents that have already contacted Backup Session
	  Manager.

	  Important note:
	  ---------------
	  In order to get the session running, there are some
	  timeout parameters (global options) that have to be
	  properly set :

	  Global options
	  --------------
	  A - BackupDeviceIdle
	  B - SmPeerID
	  C - SmDaIdleTimeOut
	  D - SmMaIdleTimeOut

	  Conditions that have to be satisfied :
	  -----------
	  A<B
	  C<D

	  Example:

		  Default 	  Suggested
		  value	  value
	  -----------------------------------
	  A	   10min	    4min
	  B	    5min	    5min
	  C	  120min	    120min
	  D	  140min	    140min

	
	  Explanation:
	  ------------
	  [A<B]
	  After all BAR clients stop sending data to a device,
	  the BSM waits for either A or B timeout to happen for
	  the device. If the timeout A is reached, the backup
	  device will be stopped gracefully, if B timeout is
	  reached, it will be aborted. That's why it is important
	  that the condition A<B is fulfilled.

	  [C<D]
	  This is a general condition that must be met for all MA
	  and DA processes, and is stated in the global options
	  file.

	  It is important to keep the option BackupDeviceIdle
	  under 300 seconds (5 minutes). If 300 or higher, the
	  session behavior will be unpredictable (errors are
	  likely to appear).

	  Part of SSPUX350_087.

	Change Request: H555008690
	  When running "omnirpt" command all the cell servers from
	  the "mom_info" and the local Cell Server are queried for
	  matching sessions. The virtual node and the local host
	  are actually the same machine, so the matching sessions
	  are listed twice.

	  Resolution:
	  The function gethostname() is not used any more to
	  determine if the inspected host is also the local host,
	  because in case of a Manager-of-Managers/ServiceGuard
	  environment it returns the physical node hostname and
	  not the virtual node hostname, making the virtual
	  hostname being seen as a non-local host. In this way
	  the virtual hostname is not queried for matching
	  sessions any more.

	Change Request: H555008780
	  Format of messages is changed from buffer to pointer
	  but change is not implemented in all areas. Database
	  Session Manager gets message from MoM server in
	  improper format and closes the connection.

	  Resolution:
	  Size of message is dynamically changed, messages are
	  not send in fixed size anymore.

	Change Request: H555008807
	  In split mirror environment with huge SAP databases
	  it can happen that the size of the message buffer
	  OmniBack II uses is too small to receive complete list
	  of SAP files to be backed up.

	  Resolution:
	  Setting the OB2IPCBUFSIZE environment variable in the
	  /opt/omni/.omnirc file on Cell Server, R1 and R2 hosts,
	  specifying the desired amount of memory to be used for
	  the buffer solves the described problem.
	  Please read the following instructions and make sure
	  that the patches listed in "Other Dependencies" section
	  (see below) are installed and the environment
	  variable is set on Cell Server, R1 and R2 systems before
	  running the backup!

	  How to determine the buffer size?
	  ---------------------------------

	  N_obj:     number of objects (files)
	  N_fs:    number of file systems
	  N_lvmvg:   number of volume groups
	  N_dg:    number of disk groups
	  N_rdsk:    number of rawdisks
	  Obj:     Object Name
	  ObjBack:   Object Backup Name
	  MntPathLen:  Path name on backup (R2) host
	         (example: /var/opt/omni/tmp/App_host)
	  fsmnt:     File System Mount Point
	  fsdev:     File System Device File
	         (example: /dev/dsk/[c0t1d1,lvol1])
	  vg:      Volume group
	         (ex: /dev/vg01)
	  dg:      Disk group (VxVM) - dependence on mapfile
	         which is required for creating disk group
	         (example:/dev/vx/dsk/dg01)
	  rdsk:    Raw disk file name
	         (example: /dev/rdsk/c1t1d1)
	  AvgLen_<xxx> average length of <xxx>

	
	  There are two different buffers used:

	  1. BSM <-> R1
	  2. R1 <-> R2

	  Calculating the BSM <-> R1 buffer size
	  --------------------------------------
	  MsgSize_BSM_R1 = N_obj * (AvgLen_Obj + 1 + MntPathLen)

	  Calculating the R1 <-> R2 buffer size
	  -------------------------------------
	  MsgSize_R1_R2 =
	    N_obj*(AvgLen_Obj+1+AvgLen_ObjBack) +
	    N_fs*(AvgLen_fsmnt*2 + MntPathLen + AvgLen_fsdev*2)+
	    N_lvmvg*(AvgLen_vg*2) + N_dg*(AvgLen_dg*2) +
	    N_rdsk*(AvgLen_rdsk*2)

	  Calculating the OB2IPCBUFSIZE value
	  -----------------------------------
	  OB2IPCBUFSIZE > max (MsgSize_BSM_R1, MsgSize_R1_R2)

	  RESTORE NOTE:
	  -------------
	  If restore is started using the sapbda utility,
	  the variable OB2IPCBUFSIZE must be exported to
	  environment prior to starting sapbda.

	  Known problems:
	  ---------------
	  If the calculated variable OB2IPCBUFSIZE is correctly
	  set, but is still too small for the file list to fit
	  into the message buffer, the session will fail with
	  the following error seen in the report:

	  BR295I Splitting mirror disks...
	  BR280I Time stamp <time>
	  BR279E Return code from '/opt/omni/lbin/ob2smbsplit
	     /<sap_homedir_path>/.<filename>.lst': 2
	  BR299E Split/resynchronization of mirror disks failed

	  In this case the variable OB2IPCBUFSIZE must be
	  recalculated to appropriate value. See above how to
	  determine it.

	  Part of SSPUX350_080.

	Change Request: H555008832
	  Last message from Disk Agent is sometimes lost. This
	  causes Disk Agent's status reported as "Failed".

	  Resolution:
	  New OmniBack II environment variable:
	    OB2VBDASLEEPBEFORECLOSE
	  is introduced.
	  Its default value is 0. Setting it to a positive
	  number, in /<OMNIBACK_HOME>/.omnirc file, it specifies
	  number of seconds to pass before Disk Agent completes
	  after sending the last block of data.
	  Sleep time insignificantly influences backup
	  performance.

	Change Request: H555008927
	  Barlists are members of a group which is not displayed
	  under reporting group in GUI Reporting.

	  Resolution:
	  Barlists are moved to a group that is displayed in GUI.

	Change Request: H555008892
	  Media handling results in IPC error when the buffer
	  size is increased and variable OB2IPCBUFSIZE is set as
	  described in above Resolution for problem HSLco37193.

	  Resolution:
	  Media Session Manager is rebuilt in order to properly
	  include the changes introduced with Resolution for
	  HSLco37193.

	  Part of SSPUX350_085.

	PHSS_26889:
	Change Request: H555008261
	  In case of Media Management Database corruption
	  backup can fail due to problems with the media
	  allocation.

	  Resolution:
	  Media allocation is improved.

	  Part of SSPUX350_066.

	Change Request: H555008410
	  Two or more integration backup sessions using the same
	  device do not queue for backup, but they all try to use
	  this device at the same time. This results in media
	  agent failure. During integration backup device
	  should be locked for backup, but other sessions
	  can still use it.

	  Resolution:
	  Backup Session Manager correctly locks the device(s),
	  and other sessions wait in the queue for backup until
	  the device is free.

	  Part of SSPUX350_077.

	Change Request: H555008452
	  In some cases because of incorrect agent exit code
	  Backup Session Manager does not terminate other agents
	  in correct order, which results in Backup Session
	  Manager hang.

	  Resolution:
	  The exit code is changed.

	  Part of SSPUX350_076.

	Change Request: 8606262839
	  Database session manager compares days, not taking
	  into account 15 minute units. Therefore report shows
	  some additional backups, which are scheduled past
	  the specified time frame.

	  Resolution:
	  Beside days Database Session Manager compares 15
	  minute units.

	PHSS_26347:
	Change Request: H555003134
	  Device enabling, disabling and status report cannot be
	  performed using OmniBack II command line.

	  Resolution:
	  New options "-disable_device", "-enable_device" and
	  "-device" are added to omnimm, omniupload and
	  omnidownload.

	  Part of SSPUX350_038.

	Change Request: H555006924
	  The message is not properly filtered out.

	  Resolution:
	  The message is properly filtered before it is send
	  to ITO.

	Change Request: H555007191
	  Improper implementation of object assigning to Media
	  Agent causes Backup Session Manager to loop forever.

	  Resolution:
	  Object assignment to Media Agent is corrected.

	Change Request: 8606221771
	  Flag for case sensitivity is not checked before
	  search session is executed.

	  Resolution:
	  Case sensitivity flag is always checked.

	Change Request: 8606236143
	  The regular expression that is parsed by the awk script
	  does not return the process ID (PID) which should be
	  killed.

	  Resolution:
	  Regular expression string in awk parse command is
	  changed.

	Change Request: H555007428
	  Executing an "enter" operation for the slot being
	  used for backup results in backup failure.

	  Resolution:
	  New global option EnterEjectCheckLocking is
	  introduced. If this option is set, Media Management
	  operation checks if slot is locked and does not
	  use it.

	  Part of SSPUX350_072.

	Change Request: 8606248483
	  When a Cell Console client connects to the server,
	  user name, system name and domain are parsed
	  correctly, but IP address is not.

	  Resolution:
	  A new environment variable

	  'OB2CRSSTRICTHOSTNAMECHECKING'

	  is introduced. Setting its value to 1 is to enforce
	  the use of hostnames obtained from IP address.

	Change Request: H555007796
	  Improperly built Database Session Manager causes
	  omnirpt to fail.

	  Resolution:
	  Properly built Database Session Manager in included
	  in patch.

	PHSS_25002:
	Change Request: B555011718
	  Rescan before backup option incorrectly deletes locked
	  slots information from OmniBack II database.

	  Resolution:
	  Locked slots are not updated during any rescan.

	Change Request: H555005922
	  Backup session is in sleep mode during the
	  pre/post-exec scripts execution. This can cause
	  the session to last a long time.

	  Resolution:
	  New global option is introduced. Details:

	  name: PrePostExecOnEveryVolumeForHostBackup

	  format:

	    PrePostExecOnEveryVolumeForHostBackup=<0 or 1>

	    default: 0

	    If this option is set (=1), Backup Disk Agent (BDA)
	    will execute pre/post-exec scripts for every
	    volume of host object specified.
	    If this option is not set (=0), Backup Session
	    Manager (BSM) will execute pre-exec script
	    prior to starting first volume BDA and post-exec
	    script after last volume BDA. During the
	    execution of these scripts, the BSM will sleep.

	Change Request: H555005975
	  In some special cases it is possible for purge of
	  filenames to fail with error written in the debug.log:

	    "DB[9] internal error [-16]
	     record not connected to set."

	  Resolution:
	  Purge is improved in order to correctly remove
	  such records.

	Change Request: H555006248
	  After the mount request during restore from SCSI-II
	  library, OmniBack II tries to load "" medium into drive.

	  Resolution:
	  Restore session manager rechecks the configuration
	  after the mount request is confirmed.

	  Part of SSPUX350_048.

	Change Request: H555006710
	  By design, OmniBack II ends session as 'Failed' if
	  there are no objects to back up.

	  Resolution:
	  Two new global variables have been introduced:

	    1) SessSucessfullWhenNoObjectsBackedUp=0
	    By setting this variable to 1 user can change the
	    Omniback II behavior in order to end the session
	    as successful when there are no objects backed up.

	    2) TreatScriptReturnAsNormal=<script return>
	    Setting this variable to a certain number instructs
	    OmniBack II to treat all the script returns equal
	    to the specified number as normal.

	  Part of SSPUX350_062.

	Change Request: H555006771
	  There is no warning reported when one creates a datalist
	  or a barlist with load balancing enabled and minimum
	  number of devices greater than number of configured
	  logical devices.

	  Resolution:
	  Comparison of minimum and configured devices number
	  is implemented.

	Change Request: H555006799
	  Media Session Manager does not send abort message to
	  Backup Media Agent started after Copy Media Agent
	  failed.

	  Resolution:
	  Media Session Manager properly handles abort message
	  from Copy Media Agent.

	Change Request: H555006810
	  1) Error in Backup Session Manager.
	     When OmniBack II - Informix backup aborting,
	     another session starts and finishes the remaining
	     database spaces.

	  2) Informix wrong error handling.

	
	  Resolution:
	  1) Case BSM_STATE_ABORTING was changed in the order
	     that Backup Session Manager aborts session when
	     requested.

	  2) The way of translating OmniBack II errors into
	     Informix errors was changed with new condition
	     checking.

	  Part of SSPUX350_063.

	Change Request: 8606217323
	  Cell Request Server and session managers abort
	  because of an accept() command failure on some
	  HP-UX 11.x systems.

	  Resolution:
	  accept() command is re-executed in case of
	  ENOBUFS failure.

	  Part of SSPUX350_059.

	PHSS_24658:
	Change Request: 8606179334
	  Initializition with "Autolabel" option creates
	  duplicated tape labels.

	  Resolution:
	  Medium initialization does not create duplicated tape
	  labels.

	Change Request: 8606195237
	  OmniBack II internal database ownership belongs to
	  primary node instead of floating hostname in
	  MC/ServiceGuard environment.

	  Resolution:
	  Database ownership is set to floating hostname.

	Change Request: H555004871
	  The data backed up with an older version of OmniBack II
	  and option "-encrypt" can not be selected from
	  Restore GUI.

	  Resolution:
	  It is possible to select objects backed up with an
	  older version of OmniBack II in Restore GUI.

	Change Request: H555005681
	  Message level of a resuming failure in XP environment
	  is set to "Normal" instead of "Major".

	  Resolution:
	  Message level is corrected.

	Change Request: H555005149
	  Cell Request Service (CRS) executes "omnidbutil -clear"
	  and returns incorrect exit code.

	  Resolution:
	  Correct exit code is returned.

	Change Request: H555005402
	  The parser incorrectly enumerates schedule types.

	  Resolution:
	  Schedule types are properly enumerated.

	  Part of SSPUX350_039.

	Change Request: H555005697
	  OmniBack II is not able to list all interfaces in cells
	  with more than 20 LAN cards because the buffer is too
	  small.

	  Resolution:
	  Buffer for storing interfaces is increased.

	Change Request: H555005583
	  OmniBack II does not lock all available devices.

	  Resolution:
	  Load balancing locks enough available devices to be used
	  for a session.

	Change Request: H555005732
	  When there is no more media available for the running
	  session, mount request is issued. This mount request can
	  not be confirmed because the drive is locked by Backup
	  Session Manager.

	  Resolution:
	  Media Session Manager ignores Backup Session Manager
	  lock making the slot free for mount request
	  confirmation.

	Change Request: H555005680
	  OmniBack II improperly recognizes post-exec script as a
	  start request if pre-exec script fails in cluster
	  environment.

	  Resolution:
	  OB2FORCEPOSTEXEC environment variable is added.
	  Setting its value to 1 in the .omnirc file causes
	  post-exec scripts to be started regardless of pre-exec
	  script exit code.

	  Part of SSPUX350_040.

	Change Request: H555005917
	  Reporting functionality is missing in Media Session
	  Manager.

	  Resolution:
	  Reporting functionality is added to Media Session
	  Manager.

	  Part of SSPUX350_042.

	Change Request: H555005973
	  After the mount request during restore from SCSI-II
	  library, Omniback tries to load "" medium into drive.

	  Resolution:
	  Restore session manager rechecks the configuration
	  after the mount request is confirmed.

	PHSS_23470:
	Change Request: 8606166806
	  If one of the agent fails session status should
	  indicate "Completed/Errors" instead of "Completed".

	  Resolution:
	  Session status is correct.

	  Part of SSPUX350_027.

	Change Request: B555008272
	  Database Session Manager starts Device Browser with
	  incorrect options.

	  Resolution:
	  Structure containing Device Browser options is
	  initialized before it is filled with the parameters.

	Change Request: H555003831
	  Backup of SAP archive logs fails if a backup request
	  for next archive log comes when Backup Session Manager
	  is already exiting.

	  Resolution:
	  Datalist entries for BAR session are removed.

	Change Request: H555004061
	  When restoring the data from STK or GRAU library,
	  wrong medium is loaded into drive after the mount
	  request confirmation.

	  Resolution:
	  Mount request is properly handled.

	Change Request: H555004021
	  Backing up Informix Parallel Server with many
	  datafiles where request is coming from the node
	  that is not specified in Informix backup
	  specification results in many warning messages reported
	  during the session.

	  Resolution:
	  New global option InformixparallelBackupIgnoreWarning
	  is added. Warnings are ignored if this option is set
	  to 1. Default value is 0.

	Change Request: B554000841
	  Licensing is not working properly for systems with
	  more than 20 lan cards, due to an OmniBack limitation.

	  Resolution:
	  Number of lan cards on a single system can be up to 100.

	Change Request: B554000869
	  Pre- and post-exec scripts return invalid exit status
	  because of timing problem.

	  Resolution:
	  Environment variable OB2EXECTIMEOUT is introduced.
	  Variable represents timeout (in seconds) after the end
	  of pre- and post-exec script. Default value is 0.
	  Recommended value is between 5 and 10 seconds.

	Change Request: H555004026
	  New Media Class, 9840, is introduced with A.03.50
	  release. This caused that some of previously created
	  devices did not work with OmniBack II 3.50.

	  Resolution:
	  New utility, mchange, changes media class for a pool
	  and for all devices that use the particular pool.
	  Usage of mchange is:

	    mchange -version | -help
	    mchange -pool PoolName -newtype NewMediaClass

	Change Request: H555004027
	  OmniBack II has a 600 mountpoints limitation. Host
	  backup fails if there are more than 600 mountpoints.

	  Resolution:
	  Number of mountpoints per host increased to 50000.

	Change Request: H555004364
	  Major messages are not checked by Backup Session
	  Manager.

	  Resolution:
	  Backup Session Manager checks all messages.

	Change Request: H555004452
	  If "omnidbutil -cdbsync" command is started in
	  Service Guard environment, some objects disappear
	  from OmniBack II internal database.

	  Resolution:
	  omnidbutil works properly in Service Guard
	  environment.

	  Part of SSPUX350_026.

	Change Request: H555004475
	  Backup Session Manager incorrectly appends full
	  Oracle backups.

	  Resolution:
	  Backup Session Manager correctly checks properties
	  of pool.

	Change Request: -
	  omnitrig does not support MS Exchange 2000 integration.

	  Resolution:
	  Scheduled MS Exchange 2000 backups are properly
	  started.

	  Part of SSPUX350_020.

	Change Request: B554000372
	  Normal, Warning and Minor messages can be seen on ITO
	  Management server even though OVfilter is set up to
	  forward only Critical messages.

	  Resolution:
	  Messages are forwarded according to OVfilter setup.

	Change Request: H555005234
	  When Backup Session Manager waits for the next client it
	  disables new client connections.

	  Resolution:
	  Proper previously failed session is restarted.

	Change Request: H555005624
	  Import of integration session fails if the session is
	  spanned over two or more media.

	  Resolution:
	  Checking for object description is changed.

	PHSS_23105:
	Change Request: H555004350
	  Performance degrated by up to 50% after upgrade from
	  OmniBack II 2.55 or 3.00.

	  Resolution:
	  Redundant update of the objects removed.

	  Part of SSPUX350_023.

	Change Request: H555004454
	  Listing of objects failed for the objects that have
	  been purged from the database, because there is no
	  link between objects and object versions.

	  Resolution:
	  Fix is implemented in libob2ecbd.sl.

	PHSS_22369:
	Change Request: 8606144294
	  File /opt/omni/sbin/nb_informix is missing.

	  Resolution:
	  File /opt/omni/sbin/nb_informix is added to OMNI-CS
	  fileset.

	Change Request: 8606147687
	  Using "List from media" option in restore context
	  ignores "See private objects" option. Objects that are
	  backed up as "Private" are not listed.

	  Resolution:
	  Option parsing in restore context is improved.

	Change Request: B554000487
	  If there are more than 100 network interfaces, ioctl()
	  call fails.

	  Resolution:
	  Buffer for SIOCGIFCONF is increased to support up to
	  1000 network interfaces.

	Change Request: B554000496
	  When backup and file search sessions are started in
	  parallel, file search session locks the database.
	  Backup Session Manager tries to write backup
	  information into locked database. Since this action can
	  not be performed, the following messages are logged
	  in the rds.log:

	    "11740  [10-Apr-00 17:37:07]  error status=5
	     11741  [10-Apr-00 17:37:07]  GROUPLOCK ELEMENT:
	    userID=4, LockType=6, LockMode= *, RecSetType=10002,
	    dba=[0:0], odnum=1"

	  Resolution:
	  File pattern search is optimized to minimize the
	  possibilities of group locks.

	Change Request: B554000550
	  OmniBack II 3.50 objects are case insensitive which is
	  not true for the SAP objects backed up with 2.55
	  version. Object tape format is changed with 3.50 as
	  well. These changes caused some SAP objects not to be
	  displayed in the Restore GUI after importing the tape
	  with SAP objects from 2.55 to 3.50.

	  Resolution:
	  Object names from tape are converted into OmniBack II
	  3.50 format after tape import from 2.55.

	Change Request: B554000597
	  System name checking is not performed for systems with
	  multiple LAN cards. Backup Session Manager is checking
	  the system names only when looking for clusters.

	  Resolution:
	  System name checking is performed when looking for
	  clusters and systems with multiple LAN cards.

	Change Request: B554000611
	  Aborting backup session is not possible because
	  Backup Session Manager incorrectly aborts Disk Agents
	  after the package switch.

	  Resolution:
	  Disk Agents are properly aborted.

	Change Request: 8606159187
	  In host backup only mount point directories can be
	  excluded. If a directory is not a mount point then it
	  cannot be excluded from the backup.

	  Resolution:
	  Non-mountpoint directories can now be excluded.

	Change Request: B554000623
	  Scheduled reports are not started with "-debug" option
	  although omnitrig is.

	  Resolution:
	  Command line option passing is implemented for omnirpt.

	Change Request: B554000712
	  Mount request is not properly implemented for SCSI-II
	  changer devices.

	  Resolution:
	  OmniBack II properly handles mount requests.

	Change Request: -
	  Option "-change_objname" is not meant to be a part of
	  OmniBack II A.03.50.

	  Resolution:
	  Option "-change_objname" is removed.

	Change Request: B554000630
	  After upgrading OmniBack ServiceGuard package from
	  3.00 to 3.50, it is not possible to list media due to
	  incorrect ownership of medium.

	  Resolution:
	  Virtual hostname is used for medium ownership.

	  Part of SSPUX350_001.

	Change Request: B554000813
	  Copy session is aborted when copying a write-protected
	  tape. When write-protected tape in the source drive is
	  checked, the cleaning tape for that drive is requested
	  and the following message appears:

	    "Cleaning tape requested by device <device_name>.
	     Please clean the drive.".

	  Resolution:
	  The cleanme signal is now processed correctly.

	  Part of SSPUX350_004.

	Change Request: B555002886
	  Execution of command

	    "omnidb -filesystem <FS_Object> -file <File_Name>"

	  causes a memory leak in RDS (approx. 300 bytes). If the
	  command is started more than 100000 times, it can cause
	  RDS to die due to a lack of memory.

	  Resolution:
	  Fix is implemented in libob2ecdb.sl.

	  Part of SSPUX350_006.

	Change Request: B554000831
	  RDS dies during a large SAP restore due to memory leak
	  described in NSMex02584.

	  Resolution:
	  Fix is implemented in libob2ecbd.sl.

	  Part of SSPUX350_006.

	Change Request: H555003726
	  Media sync does not work properly when table of
	  exported/recycled media gets too big (>3000 media).
	  Some new sessions dissapear from database. No error is
	  reported.

	  Resolution:
	  Improved error handling logs this event in debug.log.

	  Part of SSPUX350_003.

	Change Request: H555003740
	  Database stays in the hot mode after issuing an
	  "omnidbcheck" command. If a large amount of data is
	  written before OmniBack II daemons are stopped, it can
	  happen that hot files are not properly flushed. This
	  causes corruption of database.

	  Resolution:
	  omnidbcheck flushes hot files immediately after
	  database check.

	  Part of SSPUX350_003.

	Change Request: H555003729
	  Media Session Manager is incorrectly initializing media
	  in ServiceGuard environment. Owner of medium is set to
	  hostname of the active node. This results in wrong
	  medium handling and objects from such medium are
	  removed from the OmniBack II database each time Media
	  Session Manager is started.

	  Resolution:
	  Initialization of media in ServiceGuard environment
	  is improved.

	  Before applying the fix for NSMex03737 please run
	  following commands:

	    omnidbutil -change_cell_name <hostname1>

	  and

	    omnidbutil -change_cell_name <hostname2>

	  where <hostname1> and <hostname2> are names of
	  ServiceGuard nodes.

	  Part of SSPUX350_010.

	Change Request: H555003702
	  OmniBack II reports an error:

	    "Database is probably corrupt."

	  for backup sessions that span over two or more media
	  if one of them is already overwritten/exported because
	  then some of the objects are already removed from the
	  database.

	  Resolution:
	  Removed objects are skipped during the database queries.

	  Part of SSPUX350_010.

SR:
	8606362207 H555013175 H555011989 H555013036 H555013280
	H555010860 H555010504 H555010730 8606300821 H555010075
	H555010285 H555010376 H555010298 H555010103 H555009725
	H555009863 H555009297 H555009560 H555009843 H555008927
	H555008892 B554000611 B554000630 B554000712 B554000622
	B554000550 B554000650 B554000623 B554000830 B554000831
	B554000813 B554000418 B554000751 B554000761 B554000556
	B554000487 B554000496 B554000776 B554000867 B554000597
	B554000887 B554000888 B554000889 B555002886 H555008533
	H555008832 H555004477 H555008807 H555008780 H555008690
	H555008261 8606262839 H555008452 H555008410 B554000768
	8606221771 8606248483 H555007191 H555003134 H555007796
	H555007428 H555006924 8606236143 H555005975 H555005922
	H555006248 B555011718 H555006771 H555006710 H555006799
	H555006810 8606217323 H555005697 H555005402 H555005732
	H555005680 H555005149 H555004871 H555005681 H555005583
	H555005917 H555005973 8606179334 8606195237 H555004061
	H555004026 H555004027 B555008272 H555005234 H555004452
	H555003831 B554000869 H555005624 H555004364 H555004475
	B554000372 B554000841 H555004021 8606166806 H555004350
	8606159187 8606144294 8606147687

Patch Files:
	/opt/omni/lbin/crs
	/opt/omni/lbin/bsm
	/opt/omni/lbin/dbsm
	/opt/omni/lbin/msm
	/opt/omni/lbin/mmd
	/opt/omni/lbin/rsm
	/opt/omni/lbin/psm
	/opt/omni/lbin/dbbda
	/opt/omni/sbin/omnitrig
	/opt/omni/sbin/omnidbutil
	/opt/omni/sbin/omnidbcheck
	/opt/omni/sbin/nb_informix
	/opt/omni/sbin/utilns/mchange
	/opt/omni/sbin/install/omniforsg.ksh
	/opt/omni/lib/libob2ecmn.sl
	/opt/omni/lib/libob2ecdb.sl
	/opt/omni/lib/libob2emmdb.sl
	/opt/omni/lib/libob2eadm.sl
	/opt/omni/newconfig/etc/opt/omni/options/global
	/opt/omni/newconfig/etc/opt/omni/sg/csfailover.ksh

what(1) Output:
	/opt/omni/lbin/crs:
		HP OpenView OmniBack II A.03.50; internal build PHSS
			_30823/PHSS_30824, built on Tue Jul 20 17:24
			:05 2004
	/opt/omni/lbin/bsm:
		HP OpenView OmniBack II A.03.50; internal build PHSS
			_30823/PHSS_30824, built on Tue Jul 20 17:20
			:16 2004
	/opt/omni/lbin/dbsm:
		HP OpenView OmniBack II A.03.50; internal build PHSS
			_30823/PHSS_30824, built on Tue Jul 20 17:28
			:54 2004
	/opt/omni/lbin/msm:
		HP OpenView OmniBack II A.03.50; internal build PHSS
			_30823/PHSS_30824, built on Tue Jul 20 17:23
			:12 2004
	/opt/omni/lbin/mmd:
		HP OpenView OmniBack II A.03.50; internal build PHSS
			_30823/PHSS_30824, built on Tue Jul 20 17:25
			:46 2004
	/opt/omni/lbin/rsm:
		HP OpenView OmniBack II A.03.50; internal build PHSS
			_30823/PHSS_30824, built on Tue Jul 20 17:21
			:53 2004
	/opt/omni/lbin/psm:
		HP OpenView OmniBack II A.03.50; internal build PHSS
			_30823/PHSS_30824, built on Tue Jul 20 17:29
			:29 2004
	/opt/omni/lbin/dbbda:
		HP OpenView OmniBack II A.03.50; internal build PHSS
			_30823/PHSS_30824, built on Tue Jul 20 17:33
			:17 2004
	/opt/omni/sbin/omnitrig:
		HP OpenView OmniBack II A.03.50; internal build PHSS
			_30823/PHSS_30824, built on Tue Jul 20 17:33
			:44 2004
	/opt/omni/sbin/omnidbutil:
		HP OpenView OmniBack II A.03.50; internal build PHSS
			_30823/PHSS_30824, built on Tue Jul 20 17:27
			:58 2004
	/opt/omni/sbin/omnidbcheck:
		HP OpenView OmniBack II A.03.50; internal build PHSS
			_30823/PHSS_30824, built on Tue Jul 20 17:28
			:09 2004
	/opt/omni/sbin/nb_informix:
		HP OpenView OmniBack II A.03.50; internal build PHSS
			_30823/PHSS_30824, built on Tue Jul 20 17:36
			:17 2004
	/opt/omni/sbin/utilns/mchange:
		HP OpenView OmniBack II A.03.50; internal build PHSS
			_30823/PHSS_30824, built on Tue Jul 20 17:34
			:09 2004
	/opt/omni/sbin/install/omniforsg.ksh:
		None
	/opt/omni/lib/libob2ecmn.sl:
		HP OpenView OmniBack II A.03.50; internal build PHSS
			_30823/PHSS_30824, built on Tue Jul 20 17:15
			:04 2004
	/opt/omni/lib/libob2ecdb.sl:
		HP OpenView OmniBack II A.03.50; internal build PHSS
			_30823/PHSS_30824, built on Tue Jul 20 17:16
			:56 2004
	/opt/omni/lib/libob2emmdb.sl:
		HP OpenView OmniBack II A.03.50; internal build PHSS
			_30823/PHSS_30824, built on Tue Jul 20 17:25
			:22 2004
	/opt/omni/lib/libob2eadm.sl:
		HP OpenView OmniBack II A.03.50; internal build PHSS
			_30823/PHSS_30824, built on Tue Jul 20 17:27
			:11 2004
	/opt/omni/newconfig/etc/opt/omni/options/global:
		None
	/opt/omni/newconfig/etc/opt/omni/sg/csfailover.ksh:
		None

cksum(1) Output:
	4259444021 735108 /opt/omni/lbin/crs
	1625694231 1182707 /opt/omni/lbin/bsm
	248477049 1247769 /opt/omni/lbin/dbsm
	706797106 694260 /opt/omni/lbin/msm
	3988518876 530043 /opt/omni/lbin/mmd
	685423602 874939 /opt/omni/lbin/rsm
	347185803 435578 /opt/omni/lbin/psm
	909021093 365783 /opt/omni/lbin/dbbda
	3505324970 415000 /opt/omni/sbin/omnitrig
	1554182368 702067 /opt/omni/sbin/omnidbutil
	683931110 472364 /opt/omni/sbin/omnidbcheck
	4167109757 332670 /opt/omni/sbin/nb_informix
	532802823 213672 /opt/omni/sbin/utilns/mchange
	3275622251 5084 /opt/omni/sbin/install/omniforsg.ksh
	648523381 812458 /opt/omni/lib/libob2ecmn.sl
	2239015052 889556 /opt/omni/lib/libob2ecdb.sl
	4039632763 651912 /opt/omni/lib/libob2emmdb.sl
	1699542391 692720 /opt/omni/lib/libob2eadm.sl
	2258981330 34415 /opt/omni/newconfig/etc/opt/omni/options/
		global
	1805127806 2350 /opt/omni/newconfig/etc/opt/omni/sg/
		csfailover.ksh

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies:
	Some of the defect fixes contained in this patch
	depend on the following other patches or their
	successors in order to completely resolve the problem:

	PHSS_28725:
	Cell Console (CC) packet patch,
	release Date: Available
	Change Request: H555009863
	Change Request: H555003134
	Change Request: H555008807
	PHSS_28725 is required for these defect fixes.

	PHSS_28578:
	SureStore Agent (SSEA) packet patch,
	release Date: Available
	Change Request: H555009863
	PHSS_28578 is required for this defect fix.

	PHSS_28570:
	Core packet patch,
	release Date: Available
	Change Request: H555009863
	Change Request: H555008807
	Change Request: H555003134
	Change Request: B554000768
	Bad catalog access messages are displayed without
	PHSS_28570.

	PHSS_28019:
	EMC Agent packet patch,
	release Date: Available
	Change Request: H555008807
	PHSS_28019 is required for this defect fix.

	PHSS_28017:
	SAP packet patch,
	release Date: Available
	Change Request: H555009863
	Change Request: H555006710
	Change Request: H555008807
	PHSS_28017 is required for these defect fixes.

	PHSS_25950:
	Informix packet patch,
	release date: Available
	Change Request: H555006810
	PHSS_25950 is required for this defect fix.

Supersedes:
	PHSS_22369 PHSS_23105 PHSS_23470 PHSS_24658 PHSS_25002 PHSS_26347
	PHSS_26889 PHSS_28021 PHSS_28727 PHSS_29407

Equivalent Patches:
	PHSS_30824:
	s700: 11.00 11.11
	s800: 11.00 11.11

Patch Package Size: 3180 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHSS_30823

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHSS_30823.depot

	By default swinstall will archive the original software in 
	/var/adm/sw/patch/PHSS_30823.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE. 

	WARNING: If this file exists when a patch is installed, the 
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHSS_30823.text file to 
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHSS_30823.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
	PHSS_30823:
	NOTE!
	This Patch has to be installed on the Cell Manager host.
	OmniBack II Services must be shut down before the patch is
	installed. Use the following command to shut down the
	services:

	   "/opt/omni/sbin/omnisv.sh stop".

	After the installation is complete, restart OmniBack II
	Services using "/opt/omni/sbin/omnisv.sh start".

	
	Patch includes the following Site Specific Patches:
	   SSPUX350_001
	   SSPUX350_003
	   SSPUX350_004
	   SSPUX350_006
	   SSPUX350_010
	   SSPUX350_020
	   SSPUX350_023
	   SSPUX350_026
	   SSPUX350_027
	   SSPUX350_038
	   SSPUX350_039
	   SSPUX350_040
	   SSPUX350_042
	   SSPUX350_048
	   SSPUX350_059
	   SSPUX350_062
	   SSPUX350_063
	   SSPUX350_066
	   SSPUX350_072
	   SSPUX350_076
	   SSPUX350_077
	   SSPUX350_080
	   SSPUX350_085
	   SSPUX350_087
	   SSPUX350_088
	   SSPUX350_089
	   SSPUX350_090
	   SSPUX350_091
	   SSPUX350_092

	A Site Specific Patch is a temporary hotfix that
	you might have received from HP Support if you
	have encountered a problem with Data Protector
	for which no General Release patch was or is
	available yet.

	If any newer Site Specific Patch - that is
	one with a higher number - for the Cell Manager
	is installed on your system, then you
	must re-apply this SSP after installing
	this Cell Manager patch.