Patch Name:  PHNE_9028

Patch Description: s700 9.0[357] ARPA Transport patch

Creation Date: 96/10/25

Post Date:  96/10/29

Hardware Platforms - OS Releases:
        s700: 9.03 9.05 9.07

Products: N/A

Filesets:
        NETINET

Automatic Reboot?: Yes

Status: General Release

Critical:
        Yes
        PHNE_9028: PANIC

Path Name:  /hp-ux_patches/s700/9.X/PHNE_9028

Symptoms:
        PHNE_9028:
                See Defect Description

Defect Description:
        PHNE_9028:
                ( SR number:  5003342071 )
        ping can cause panic.

SR:
        5003342071

Patch Files:  
        /etc/conf/libinet.a(ip_input.o)

what(1) Output:
        /etc/conf/libinet.a(ip_input.o):
                PHNE_9028 ip_input.c $Revision: 1.3.193.7 $ $Date: 9
                        6/10/24 17:46:52 $

sum(1) Output:
        1872 28 /etc/conf/libinet.a(ip_input.o)

Patch Conflicts: None

Patch Dependencies:  
        s700: 9.03 9.05 9.07: PHNE_7252

Hardware Dependencies:  None

Other Dependencies:  None

Supersedes:  None

Equivalent Patches: None

Patch Package Size:  70 Kbytes

Installation Instructions:  
        Please review all instructions and the Hewlett-Packard
        SupportLine User Guide or your Hewlett-Packard support terms
        and conditions for precautions, scope of license,
        restrictions, and, limitation of liability and warranties,
        before installing this patch.
        ------------------------------------------------------------
        1. Back up your system before installing a patch.

        2. Copy the patch to your /tmp directory and unshar it:

                cd /tmp
                cp patch_source/PHNE_9028 .
                sh PHNE_9028

        3. Become root and run update:

                /etc/update [-r [kernel_gen_file]] -s \
                        /tmp/PHNE_9028.updt PHNE_9028

        Update moves the original software to
        /system/PHNE_9028/orig.  Keep this file to recover from any
        potential problems.  You should move the .text file to
        /system/PHNE_9028 for future reference.

        To put this patch on a magnetic tape and update from the
        tape drive, use dd:

                dd if=PHNE_9028.updt of=/dev/rmt/0m bs=2048

Special Installation Instructions:  
        Due to the critical nature of this defect, HP is introducing
        this as a non-cumulative patch.  As a result the current
        ARPA Transport cumulative patch, PHNE_7252 must be
        installed before PHNE_9028.  The two can be installed in the
        same session, but PHNE_7252 must load first.  The
        installation of PHNE_9028 will fail if PHNE_7252 is not
        installed.