Patch Name:  PHNE_4482

Patch Description: s700 9.X OTS/9000 C.04.0[01] patch to correct panics

        Fix panic in OTS/9000 due to corrupt routing cache pointers

        This patch fixes a problem in OTS/9000 which sometimes causes
        it to panic when customers' machines are communicating with
        more than 32 machines at one time. Usually identified by a
        stack marker with the routine ERcLru or ERcCre at the top.

Path Name:  /hp-ux_patches/s700/9.X/PHNE_4482

Effective Date:  940706

OS Release:  9.00 9.01 9.03 9.05

Automatic Reboot?:  Yes

Critical:  Yes
        PHNE_4482: PANIC

Patch Files:  
    e2isub.o

SR#:  None

"what" string/timestamp:  
    e2isub.o:
         e2isub.c $Revision:  1.3.109.3.1.1 $ $Date:  94/07/06 16:39:23
         $

"sum" output:  
    2482 27 e2isub.o

Dependencies:  None

Supersedes:  None

Patch Package Size:  40 Kbytes

Installation Instructions:  

     Please review all instructions and the Hewlett-Packard
     SupportLine User Guide or your Hewlett-Packard support terms
     and conditions for precautions, scope of license,
     restrictions, and, limitation of liability and warranties,
     before installing this patch.

     Note: Please back up your system before you patch.

---------------------------------------------------------------------------
After getting the patch onto your machine, unshar the patch (sh PHNE_4482).

To install this patch do the following:
1) Run /etc/update (Note: you must be logged in as root to update
   a system).
2) Once in the update "Main Menu" move the highlighted line to "Change
   Source or Destination ->" and press "Return" or "Select Item".
3) Make sure the highlighted item in the "Change Source or Destination"
   window is "From Tape Device to Local System ...", then press "Return" or
   "Select Item".
4) You should now be in the "From Tape Device to Local System" window.
   Change the "Source:  /dev/rmt/0m" to "Source: /tmp/PHNE_4482.updt"
   (this assumes that you are in the /tmp directory where PHNE_4482.updt
   has been placed).  Note: You must enter the complete path name.
5) Press "Done".
6) From here on follow the standard directions for update.

The customized script that update runs will move the original software
to /system/PHNE_4482/orig.  HP recommends keeping this software there in
order to recover from any potential problems.  It is also recommended that
you move the PHNE_4482.text file to /system/PHNE_4482 to be retained for
future reference.

If you wish to put this patch on a magnetic tape and update from the tape
drive, dd a copy of the patch to the tape drive.  As an example the
following will create a copy of the patch that update can read:
dd if=PHNE_4482.updt of=/dev/rmt/0m bs=2048